UV-LED -lamppujen soveltuminen laivojen painolastivesien käsittelyyn

Painolastivesien mukana kulkeutuvien lajien leviäminen on yksi vakavimmista globaaleista ympäristöuhkista. Kansainvälinen merenkulkujärjestö IMO määritteli vuonna 2004 kansainvälisen painolastivesiyleissopimuksen, jonka tarkoituksena on ehkäistä laivojen painolastivesien mukana kulkeutuvien lajien leviämistä. Sopimus velvoittaa aluksia käsittelemään niiden painolastivedet ja se sisältää myös käsittelyjärjestelmiltä edellytetyt vaatimukset. Vaikka sopimus ei ole vielä astunut voimaan, painolastivesien käsittelyyn löytyy markkinoilta jo useita kymmeniä IMO:n hyväksymiä käsittelyjärjestelmiä, jotka hyödyntävät erilaisia mekaanisia, fysikaalisia ja kemiallisia menetelmiä. Yksi yleisimmin käytetyistä menetelmistä on UV-säteilytys. UV-säteily tuotetaan elohopealampuilla, jotka kuitenkin kuluttavat paljon energiaa ja sisältävät myrkyllistä elohopeaa. Tämän työn tarkoituksena oli selvittää, voisiko elohopealamput korvata lähitulevaisuudessa UV-LED -lampuilla. UV-LED –lamppujen etuja ovat muun muassa energiatehokkuus, kestävä rakenne ja myrkyttömyys. Työn tärkeimpänä tavoitteena oli tutkia laboratoriomittausten avulla, millainen UV-annosmäärä 10-50 µm kokoisten kasviplanktonien inaktivoimiseen tarvitaan. Mittausjärjestelyt vastasivat suurelta osin IMO:n vaatimuksia. Laboratoriomittauksissa käytettiin 265 nm:n aallonpituudella toimivia UV-LED -lamppuja. Näytteiden analysoinnissa käytettiin sekä PAM-fluorometriä että virtaussytometriä. Saatujen tulosten perusteella tutkimuksessa käytettyjen lajien Asterionellopsis glacialis ja Thalassiosira sp. täydelliseen inaktivoitumiseen tarvittiin noin 600 mJ/cm2 suuruinen UV-annos. Tulos vastasi ennakko-odotuksia ja se oli vertailukelpoinen muiden aiheesta tehtyjen tutkimusten kanssa. Koska nykyisten UV-LED –lamppujen teho on hyvin alhainen, ne eivät vielä sovellu painolastivesien käsittelyyn. UV-LED –lamppujen kehitystyö on kuitenkin käynnissä ja on arvioitu, että niitä voitaisiin käyttää suurten virtaamien käsittelyssä 5-10 vuoden kuluttua.

Veden desinfiointi UV-LED-valolla

Veden riittämätön puhdistus aiheuttaa riskin veden käyttäjille. Miljoonia kuolemia vuosittain aiheuttavien vesiteitse leviävien sairauksien ehkäisemiseksi vaaditaan tehokkaita juomaveden desinfiointimenetelmiä. Kuivuuden ja väestönkasvun myötä veden tarve on lisääntynyt ja vedenkulutus tulee yhä kasvamaan. Tästä syystä mahdollisuus kierrättää vettä hyödyntäen sitä esimerkiksi kasteluun on saanut yhä enemmän huomiota. Kierrätettävä vesi on kuitenkin käsiteltävä huolellisesti sen sisältämän mikrobiologisen kontaminaatioriskin vuoksi. Ultraviolettisäteily luokitellaan fysikaaliseksi desinfiointimenetelmäksi. Sen tehokkuus perustuu mikro-organismien absorboimaan UV-säteilyyn, jonka aiheuttamien DNA:ssa tai RNA:ssa tapahtuvien muutoksien seurauksena mikro-organismi inaktivoituu ja estyy lisääntymästä. UV-desinfioinnissa on tyypillisesti käytetty elohopeahöyrylamppuja. Vaihtoehtoinen UV-säteilyn lähde ovat LEDit eli valoa emittoivat diodit. Matalapaine-elohopeahöyrylamppujen emittoima säteily on aallonpituudella 254 nm ja keskipaine-elohopeahöyrylamppujen emittoima säteily on laajakaistaista säteilyä. Energiatehokkuuden lisäksi LEDien etuna on, että niillä voidaan tuottaa kapeakaista säteilyä aallonpituudella, joka parhaiten absorboituu DNA:han. Tämän diplomityön tarkoituksena oli tutkia, onko UVC-alueen aallonpituuksien yhdistelmillä synergistisiä etuja LEDien desinfiointitehokkuuteen, kun desinfioidaan virtaavaa vettä useilla säteilyannoksilla ja indikaattorimikrobina käytetään kolibakteeria. Tavoitteena oli myös tutkia tällä hetkellä saatavissa olevien LEDien desinfiointitehokkuutta energiatehokkuuden näkökulmasta. Yksittäisistä aallonpituuksista desinfiointitehokkuudeltaan parhaimmaksi osoittautui 260 nm, aallonpituuksien yhdistelmistä tehokkain oli 265 nm:n ja 260 nm:n yhdistelmä. Muilla aallonpituuksien yhdistelmillä ei saavutettu odotettua parempaa desinfiointitehokkuutta. Optiselta teholtaan parhaimmat LEDit, 265 nm, 270 nm ja 275 nm olivat kokeiden perusteella myös energiatehokkuuden kannalta tarkasteltuina parhaimmat sekä yksittäin että yhdistelminä. UVC-aallonpituuksia emittoivien LEDien optisen tehokkuuden paraneminen on edellytys LEDien hyödyntämiselle desinfioinnissa.

The Combined treatment of UV Light and Titanium Dioxide (TiO2) in Grease Filtration Technique

The aim of this thesis was to identify the best grease removal technique with the application of low power of UV light to TiO2 coated grease filters. The treatment with various power series of ozone generating and ozone free lamps to normal grease filters and TiO2 coated grease filters were examined and the obtained results are compared to each other in this paper. The effect of ozone reaction was observed and compared with the effect of TiO2. The experiments were solely based on the photo oxidation and photo catalytic oxidation reactions. TiO2 is a green catalyst used in the photocatalytic reaction. Sunflower oil was used for grease production and tetracholoroethylene as a solvent. Grease samples were collected from the ventilation duct connected to the cooking hood system. Sample extraction was done in ultrasonic bath with the principle of sonication. The sample analysis was done by FTIR machine. The result determining the concentration of grease was the quantification of saturated C-H bonds in the chosen peak group of the spectrum. A very low power of UVC light functions perfectly with the Titanium dioxide. The experimental results have shown the combined treatment of titanium dioxide and UV light is an effective method in grease removal process. The photocatalytic reaction with titanium dioxide is better than photo oxidation reaction with ozone treatment. Photocatalytic reaction is environmentally friendly, energy efficient and economical.

Regulation of the expression of NADP-malic enzyme by UV-B, red and far-red light in maize seedlings

The induction of nicotinamide adenine dinucleotide phosphate-malic enzyme (NADP-ME) in etiolated maize (Zea mays) seedlings by UV-B and UV-A radiation, and different levels of photosynthetically active radiation (PAR, 400-700 nm) was investigated by measuring changes in activity, protein quantity and RNA levels as a function of intensity and duration of exposure to the different radiations. Under low levels of PAR, exposure to UV-B radiation but not UV-A radiation for 6 to 24 h caused a marked increase in the enzyme levels similar to that observed under high PAR in the absence of UV-B. UV-B treatment of green leaves following a 12-h dark period also caused an increase in NADP-ME expression. Exposure to UV-B radiation for only 5 min resulted in a rapid increase of the enzyme, followed by a more gradual rise with longer exposure up to 6 h. Low levels of red light for 5 min or 6 h were also effective in inducing NADP-ME activity equivalent to that obtained with UV-B radiation. A 5-min exposure to far-red light following UV-B or red light treatment reversed the induction of NADP-ME, and this effect could be eliminated by further treatment with UV-B or red light. These results indicate that physiological levels of UV-B radiation can have a positive effect on the induction of this photosynthetic enzyme. The reducing power and pyruvate generated by the activity of NADP-ME may be used for respiration, in cellular repair processes and as substrates for fatty acid synthesis required for membrane repair.

An HPLC-UV method for the measurement of permeability of marker drugs in the Caco-2 cell assay

The Caco-2 cell line has been used as a model to predict the in vitro permeability of the human intestinal barrier. The predictive potential of the assay relies on an appropriate in-house validation of the method. The objective of the present study was to develop a single HPLC-UV method for the identification and quantitation of marker drugs and to determine the suitability of the Caco-2 cell permeability assay. A simple chromatographic method was developed for the simultaneous determination of both passively (propranolol, carbamazepine, acyclovir, and hydrochlorothiazide) and actively transported drugs (vinblastine and verapamil). Separation was achieved on a C18 column with step-gradient elution (acetonitrile and aqueous solution of ammonium acetate, pH 3.0) at a flow rate of 1.0 mL/min and UV detection at 275 nm during the total run time of 35 min. The method was validated and found to be specific, linear, precise, and accurate. This chromatographic system can be readily used on a routine basis and its utilization can be extended to other permeability models. The results obtained in the Caco-2 bi-directional transport experiments confirmed the validity of the assay, given that high and low permeability profiles were identified, and P-glycoprotein functionality was established.

STABILITY OF OILS HEATED BY MICROWAVE: UV - SPECTROPHOTOMETRIC EVALUATION

The effects of microwave heating on the oxidative stability of refined canola, corn and soybean oils were determined by absorptivity in the UV spectrum and by chemical analysis (peroxide and acid values). Samples were heated in a microwave oven (800 W, 2,450 MHz) for 0 to 36 min. Microwave heating produced oxidative degradation in the three oils. Absorptivity at 232 and 270 nm increased gradually with an increase in microwave exposure time (0-36 min) for canola, corn and soybean oils. Values of absorptivity at 232 nm increased from 4.812, 3.568 and 4.183 to 10.579, 12.874 and 15.950 after 36 min of heating canola, corn and soybean oil, respectively. The absorptivity at 232nm, due to the formation of conjugated dienes, was a good index for measuring the degradation of microwaved samples. UV scanning (220 - 320 nm) detected alterations in the spectrum of microwaved samples. Acid value also increased within 36 min of heating for all oils. Peroxide value showed a significant difference (P<0.05) in the initial stage of heating (0-6 min) for all oils. After this period it could not be correlated with absorptivity at 232 nm, due to the instability of hydroperoxides at high temperatures.

Determinação simultânea de amarelo tartrazina e amarelo crepúsculo em alimentos via espectrofotometria UV-VIS e métodos de calibração multivariada

Os corantes sintéticos são usualmente adicionados a alimentos industrializados para conferir e restaurar a cor obtendo-se a qualidade estética desejada. Em função destes aspectos e do potencial toxicológico que alguns corantes podem apresentar, o controle de qualidade destes compostos é de fundamental importância. Neste trabalho, foi estudado o potencial das metodologias matemáticas como o princípio da aditividade, espectrofotometria derivativa e técnica multivariada (Regressão por Mínimos Quadrados Parciais - PLSR) na determinação simultânea de dois corantes alimentícios: Amarelo Crepúsculo (AC) e Amarelo Tartrazina (AT), extraídos com lã natural. Estas metodologias foram avaliadas e comparadas em função das suas capacidades de previsão, sendo que o modelo PLSR otimizado (faixa espectral de 305 a 645 nm, empregando-se 1ª derivada como transformação dos dados e 2 componentes principais) apresentou o menor valor de Raiz Quadrada da Soma dos Erros de Previsão (RMSEP) (AT = 0,191 e AC = 0,102). A faixa de concentração estudada foi de 1,0 a 16,0 mg.L-1 para AC e de 2,0 a 22,0 mg.L-1 para AT. O conjunto de validação externa apresentou erros relativos médios de 1,97% para AC e 1,39% para AT. A aplicação desta metodologia em amostras reais mostrou que em todas as amostras analisadas as concentrações destes corantes estavam de acordo com os limites estabelecidos pela legislação brasileira

Biochemical and color changes of fresh-cut melon (Cucumis melo L. cv. Galia) treated with UV-C

The importance of minimally processed commodities in the retail groceries of most developed countries has been rising continuously during the last decades. Cantaloupe melon is used more than any other fruit in fresh-cut processing. Ultraviolet (UV) light has been extensively used to simulate biological stres in plants and for determining resistance mechanisms of plant tissues. In this study the effect of ultraviolet irradiation on some properties of fresh-cut cantalope melon was determined during storage. Freshly cut cantalope melons cubes treated with ultraviolet irradiation at the doses of 1, 2 or 3 min before storage, and then placed in a cold room at 5±1°C temperature and 85-90% RH. Hue angle values of control group is low compared to UV-C treated samples, whereas L values of is high. EL of UV treated samples higher than those of control group. Total soluble solids of fresh-cut melon samples in UC3 treatment increased during storage. The results indicate that UV-C treatments on fresh-cut cantaloupe melon cubes increased total soluble solids independently from water loss.

Postharvest UV-B treatments increased fructose content of tomato (Solanum lycopersicon L. cv. Tayfun F1) harvested at different ripening stages

Abstract In the postharvest stage, taste and flavor are the key components of the marketability of tomato. Therefore, greater emphasis is now being placed on improving traits such as sugar content. In this study postharvest ultraviolet-B (UV-B) treatments on sugar, total soluble solids, and color of tomatoes harvested at different stages were investigated. Tomatoes harvested at turning, pink, and red stages were treated with two different doses of UV-B irradiation: UVB4 and UVB8. Color L* and hue angle values of tomatoes treated with UV-B were found to be high, which means the red color of tomatoes was improved. UVB4 treatments increased the color a* and saturation index values of tomatoes at pink and red harvest stage, although it did not affect at the turning stage. Additionally, UV-B irradiation treatments had no effect on sucrose content of the tomatoes. Fructose, glucose, and TSS content of tomatoes treated with UVB8 at red harvest stage were found to be high. Hence, the results obtained from this study are of great importance in terms of providing an increase in the amount of sugar without the need for breeding, and also consumer satisfaction.

Blue and Uv-Emitting Upconversion Nanoparticles: Synthesis and (Bio) Analytical Applications.

Rare-earth based upconverting nanoparticles (UCNPs) have attracted much attention due to their unique luminescent properties. The ability to convert multiple photons of lower energy to ones with higher energy through an upconversion (UC) process offers a wide range of applications for UCNPs. The emission intensities and wavelengths of UCNPs are important performance characteristics, which determine the appropriate applications. However, insufficient intensities still limit the use of UCNPs; especially the efficient emission of blue and ultraviolet (UV) light via upconversion remains challenging, as these events require three or more near-infrared (NIR) photons. The aim of the study was to enhance the blue and UV upconversion emission intensities of Tm3+ doped NaYF4 nanoparticles and to demonstrate their utility in in vitro diagnostics. As the distance between the sensitizer and the activator significantly affect the energy transfer efficiency, different strategies were explored to change the local symmetry around the doped lanthanides. One important strategy is the intentional co-doping of active (participate in energy transfer) or passive (do not participate in energy transfer) impurities into the host matrix. The roles of doped passive impurities (K+ and Sc3+) in enhancing the blue and UV upconversions, as well as in influencing the intense UV upconversion emission through excess sensitization (active impurity) were studied. Additionally, the effects of both active and passive impurity doping on the morphological and optical performance of UCNPs were investigated. The applicability of UV emitting UCNPs as an internal light source for glucose sensing in a dry chemistry test strip was demonstrated. The measurements were in agreement with the traditional method based on reflectance measurements using an external UV light source. The use of UCNPs in the glucose test strip offers an alternative detection method with advantages such as control signals for minimizing errors and high penetration of the NIR excitation through the blood sample, which gives more freedom for designing the optical setup. In bioimaging, the excitation of the UCNPs in the transparent IR region of the tissue permits measurements, which are free of background fluorescence and have a high signal-to-background ratio. In addition, the narrow emission bandwidth of the UCNPs enables multiplexed detections. An array-in-well immunoassay was developed using two different UC emission colours. The differentiation between different viral infections and the classification of antibody responses were achieved based on both the position and colour of the signal. The study demonstrates the potential of spectral and spatial multiplexing in the imaging based array-in-well assays.

Empleo de estándar interno en la determinación de arsénico a nivel de trazas por espectrofotometría UV

Tesis (Maestría en Ciencias Químicas con Especialidad en Química Analítica) UANL

Síntesis y caracterización de nanopartículas PbMoO? para la degradación fotocatalítica de contaminantes orgánicos bajo irradiación UV.

Tesis (Doctor en Ingeniería de Materiales) UANL, 2012.

Efecto inductor de la tolerancia salino mediante la aplicación de radiaciones UV-B y UV-C en semillas de soya (glycine max l.), trigo (tritium aestivum l.), girasol (helianthus annuus l.) y pino piñonero (pinus maximatinezii r.)

Tesis (Doctor en Ciencias con acentuación en Manejo y Administración de Recursos Vegetales) UANL, 2014.

Etude du rôle de la réponse UV sur le contrôle de la réparation par excision de nucléotides (NER) des dommages à l’ADN : rôle des voies MAPK et de l’ADN polymérase eta

La réponse cellulaire aux ultra-violets (UV), ou réponse UV, est une réponse complexe et spécialisée dans l’adaptation et la tolérance des dommages aux UV. Celle-ci est initiée par un grand nombre d’évènements moléculaires et de signalisation nucléaire mais aussi au niveau de la membrane plasmique ou du cytoplasme. L’importance et l’influence exactes de ces évènements sur la réparation par excision de nucléotides (NER) des dommages UV à l’ADN sont encore mal comprises et doivent encore être méthodiquement démontrées. Dans cette thèse, grâce à l’utilisation d’une méthode sensible d’analyse de la réparation NER basée sur la cytométrie en flux, il est montré, dans un premier temps, que l’activité des voies MAPK (Mitogen-Activated Protein Kinases), qui sont des voies de signalisation de stress UV d’origine cytoplsamique, ne participent pas à l’efficacité de réparation NER des dommages UV dans les cellules humaines. En effet, l’abrogation de la signalisation MAPK, par inhibition pharmacologique, par utilisation de mutants dominant-négatifs ou par inhibition de leur expression endogène, ne révèlent aucun changement de la cinétique de réparation des dommages UV par excision de nucléotides. Cependant, l’utilisation de cette même méthode de réparation, mais cette fois, appliquée pour l’étude de réparation NER en fonction du cycle cellulaire, a permis de mettre en évidence la nécessité fonctionnelle de l’ADN polymérase translésionnelle eta (Pol η) dans la réparation NER des dommages UV, uniquement en phase S. Cette observation fut initialement caractérisée dans les cellules de patients affectés du syndrome variant de xérodermie pigmentaire (XP-V) puis, confirmée ensuite par l’inhibition de l’expression de Pol η endogène ou par la complémentation avec des mutants non-fonctionnels dans les cellules XP-V. Ces résultats indiquent que, contrairement à la réponse UV MAPK cytoplasmique, les évènements nucléaires comme la synthèse translésionnelle, peuvent influencer l’efficacité de réparation NER en phase S. Plus particulièrement, ces données établissent un lien possible entre la réparation NER en phase S et les niveaux de stress réplicatifs, révélé ici par la déficience fonctionnelle Pol η ou ATR. Les observations, présentées dans cette thèse, renforcent un rôle du point de contrôle S aux UV sur l’efficacité de la réparation NER et suggèrent que l’inhibition NER, observée en phase S dans les cellules XP-V, est modulée par le stress réplicatif. Un tel moyen de contrôle pourrait avoir une action plutôt protectrice pendant cette phase critique du cycle cellulaire. Mots clés: UV, translésionnelle, eta, MAPK, NER, CPD, cytométrie, phase-S, tolérance.

NIR to UV absorption spectra and the optical constants of phthalocyanines in glassy medium

Optical absorption studies of phthalocyanines (Pc-s) in borate glass matrix have been reported for the first time. Measurements have been done corresponding to photon energies between 1.1 and 6.2 eV for free base, manganese, iron, nickel, molybdenum, cobalt and copper phthalocyanines. Several new discrete transitions are observed in the UV–vis region of the spectra in addition to a strong continuum component of absorption in the IR region. Values of some of the important optical constants viz. absorption coefficient (α), molar extinction coefficient (ε), absorption cross-section (σa), band width (Δλ), electric dipole strength (q2) and oscillator strength (f) for the relevant electronic transitions are also presented. All the data reported for Pc-s in the new matrix have been compared with those corresponding to solution, vapor and thin film media.