Graphene-like nano-sheets for surface acoustic wave gas sensor applications

The gas sensing properties of graphene-like nano-sheets deposited on 36° YX lithium tantalate (LiTaO3) surface acoustic wave (SAW) transducers are reported. The thin graphene-like nano-sheets were produced via the reduction of graphite oxide which was deposited on SAW interdigitated transducers (IDTs). Their sensing performance was assessed towards hydrogen (H2) and carbon monoxide (CO) in a synthetic air carrier gas at room temperature (25 °C) and 40 °C. Raman and X-ray photoelectron spectroscopy (XPS) revealed that the deposited graphite oxide (GO) was not completely reduced creating small, graphitic nanocrystals ∼2.7 nm in size. © 2008 Elsevier B.V.

Anchoring and exposing in the third place : regular identification at the boundaries of social realms

Harry’s is my favourite bar in my neighbourhood. It is a small wine bar, owned by three men in their late thirties and targeted at people like them; my gentrifying inner city neighbourhood’s 20 to 40 something urban middle class. Harry’s has seats along the bar, booths inside, and a courtyard out the back. The seating arrangements mean that larger groups tend to gather outside, groups of two to four spread around the location, and people by themselves, or in groups of two, tend to sit at the bar. I usually sit at the bar....

Not-for-profits and risk accountability : insuring the third sector

Not for profit organisations face significant challenges in managing organisational risk. In this regard not-for-profits are not unique but they are distinguishable from their 'for-profit' counterparts in that they are less likely to have the resources to find sufficient risk management strategies and plans, are very vunerable to cyclical changes in the insurance market and are not usually in a position to pass on the costs of increased premiums to third parties such as consumers of their services. This article explores the nature and extent of risks faced by the not-for-profit sector; the appropriateness and scope of risk management to reduce and manage the likelihood and incidence of risk; and the types of insurance and options to cover risks that materialise. It concludes with a recommendation for a potential course of action.

Practice and procedure : a recent Court of Appeal case examines the meaning of 'third party payer' in terms of Part 3.4 of the Legal Profession Act 2007.

In Legal Services Commissioner v Wright [2010] QCA 321 the Queensland Court of Appeal allowed an appeal from the first instance decision. The decision involved the construction of “third party payer” in Part 3.4 of the Legal Profession Act 2007 (Qld).

Composing services for third-party service delivery

This paper proposes a model-based technique for lowering the entrance barrier for service providers to register services with a marketplace broker, such that the service is rapidly configured to utilize the brokerpsilas local service delivery management components. Specifically, it uses process modeling for supporting the execution steps of a service and shows how service delivery functions (e.g. payment points) ldquolocalrdquo to a service broker can be correctly configured into the process model. By formalizing the different operations in a service delivery function (like payment or settlement) and their allowable execution sequences (full payments must follow partial payments), including cross-function dependencies, it shows how through tool support, the non-technical user can quickly configure service delivery functions in a consistent and complete way.

Third-order theory of spectacle lenses applied to correction of peripheral refractive errors

Purpose: To demonstrate that relatively simple third-order theory can provide a framework which shows how peripheral refraction can be manipulated by altering the forms of spectacle lenses. Method: Third-order equations were used to yield lens forms that correct peripheral power errors, either for the lenses alone or in combination with typical peripheral refractions of myopic eyes. These results were compared with those of finite ray-tracing. Results: The approximate forms of spherical and conicoidal lenses provided by third-order theory were flatter over a moderate myopic range than the forms obtained by rigorous raytracing. Lenses designed to correct peripheral refractive errors produced large errors when used with foveal vision and a rotating eye. Correcting astigmatism tended to give large errors in mean oblique error and vice versa. When only spherical lens forms are used, correction of the relative hypermetropic peripheral refractions of myopic eyes which are observed experimentally, or the provision of relative myopic peripheral refractions in such eyes, seems impossible in the majority of cases. Conclusion: The third-order spectacle lens design approach can readily be used to show trends in peripheral refraction.

Simulation of AE wave propagation in thin plate for source identification

In most materials, short stress waves are generated during the process of plastic deformation, phase transformation, crack formation and crack growth. These phenomena are applied in acoustic emission (AE) for the detection of material defects in wide spectrum areas, ranging from non-destructive testing for the detection of materials defects to monitoring of microeismical activity. AE technique is also used for defect source identification and for failure detection. AE waves consist of P waves (primary/longitudinal waves), S waves (shear/transverse waves) and Rayleight (surface) waves as well as reflected and diffracted waves. The propagation of AE waves in various modes has made the determination of source location difficult. In order to use the acoustic emission technique for accurate identification of source location, an understanding of wave propagation of the AE signals at various locations in a plate structure is essential. Furthermore, an understanding of wave propagation can also assist in sensor location for optimum detection of AE signals. In real life, as the AE signals radiate from the source it will result in stress waves. Unless the type of stress wave is known, it is very difficult to locate the source when using the classical propagation velocity equations. This paper describes the simulation of AE waves to identify the source location in steel plate as well as the wave modes. The finite element analysis (FEA) is used for the numerical simulation of wave propagation in thin plate. By knowing the type of wave generated, it is possible to apply the appropriate wave equations to determine the location of the source. For a single plate structure, the results show that the simulation algorithm is effective to simulate different stress waves.

Using a thimble to drink from a fire hydrant: information anxiety and the third sector

In the last 10 years, the third sector has seen an eruption of texts, websites, discussion forums, conferences, new journals, new research centres and sector-specific degrees. This growing abundance of information allows for hitherto impossible networking, collaboration and general awareness of what is happening in the sector. At the same time, however, like staff in many industries, nonprofit professionals can suffer from an increasingly common 21st century malaise known as ‘information anxiety’. It is worth examining the sector through the lens of Information Studies theory, to question what the information technology needs of nonprofits are and how their information management techniques may differ from those in the public and private sectors. There are implications of this both for those within the industry (in terms of governance, training and public relations) and those external to it (who may form relationships with nonprofits on the basis of access to information).

Managing an ageing third sector workforce: international and local perspectives

Australia, like all developed and most developing countries, is facing major contextual changes, one of which is an ageing population, largely through declining fertility and increasing longevity (WHO 2002). This will impact on most aspects of global, national, local, community, family and individual interactions and decision-making, including for the nonprofit sector. The sector should be aware that population ageing is increasingly being addressed in public finance and policy agendas within Australia (see, for example, Intergenerational Report 2002-3), as well as by governments in countries such as the United Kingdom, United States and New Zealand, and the Organisation for Economic Co-operation and Development (OECD) and European Economic Policy Committee (EEPC).

Particle wave

“Particle Wave” is comprised of six lenticular panels hung in an even, horizontal sequence. Each panel alternates between two solid colour fields as you move past it. There are six colours in total, with each colour represented twice in the spectrum. From left to right, the panels move through yellow, orange, magenta, violet, blue, green and back to yellow. The work’s title refers to the two competing theories of light, which can be understood as either paradoxical or complementary. Like these theories, the experience of viewing the work catches us in a double bind. While we can orient ourselves to see solid colour fields one by one, we are never able to fully capture them all at once. In fact, it is only through our continual movement, and the subsequent transitioning of visible colours that we register the complete spectrum. Through this viewing experience, “Particle Wave” actively engages with our peripheral vision and the transitory nature of perception. It plays with the fundamental pleasures of colour and vision, and the uneasy seduction of being unable to grasp multiple phenomena simultaneously.

Third sector partnerships : opportunities and risks

The establishment by the Prime Minister of the Community Business Partnerships Board along with recent taxation reform has drawn attention to corporate philanthropy in Australia. Definitions and models are needed as each of the potential partners – government, corporations and nonprofit organisations – attempts to come to grips with opportunities. The intending partners will need to determine their responsibilities and desired outcomes so that they may work effectively towards mutually beneficial working relationships. Performance indicators need to be determined, benchmarks developed and best practice promoted. A dearth of research exists in this area (Burch, 1998; Industry Commission Report, 1995; Lyons & Hocking, 1998). More exhaustive research, collection and analysis of appropriate data will aid the process. This particular research indicates a lack of understanding between corporations and nonprofit organisations. There are risks inherent in the proposed partnerships, such as inability to reach agreement, potential for increased costs, and failure to deliver by one of the partners. This paper assesses opportunities and risks, suggests topics for high level debate, and indicates models for the development of partnerships.

In search of the Korean digital wave

This article sets the context for this special themed issue on the 'Korean digital wave' by considering the symbiotic relationship between digital technologies, their techniques and practices, their uses and the affordances they provide, and Korea's 'compressed modernity' and swift industrialisation. It underscores the importance of interrogating a range of groundbreaking developments and innovations within Korea's digital mediascapes, and its creative and cultural industries, in order to gain a complex understanding of one of Australia's most significant export markets and trading partners. Given the financial and political commitment in Australia to a high-speed broadband network that aims to stimulate economic and cultural activity, recent technological developments in Korea, and the double-edged role played by government policy in shaping the 'Korean digital wave', merit close attention from media and communications scholars.