Grape-seed procyanidins modulate cellular membrane potential and nutrient-induced GLP-1 secretion in STC-1 cells

Grape-seed procyanidins (GSPE) modulate glucose homeostasis and it was suggested that GSPE may achieve this by enhancing the secretion of incretin hormones such as glucagon-like peptide-1 (GLP-1). Therefore, the aim of the present study is to examine in detail the effects of GSPE on intestinal endocrine cells (STC-1). GSPE was found to modulate plasma membrane potential in enteroendocrine cells, inducing depolarization at low concentrations (0.05 mg/L) and hyperpolarization at high concentrations (50 mg/L), and surprisingly this was also accompanied by suppressed GLP-1 secretion. Furthermore, how GSPE affects STC-1 cells under nutrient-stimulated conditions (i.e. glucose, linoleic acid and L-proline) was also explored, and we found that the higher GSPE concentration was effective in limiting membrane depolarization and reducing GLP-1 secretion. Next, it was also examined whether GSPE affected mitochondrial membrane potential, finding that this too is altered by GSPE, however this does not appear to explain the observed effects on plasma membrane potential and GLP-1 secretion. In conclusion, our results show that grape-seed procyanidins modulate cellular membrane potential and nutrient-induced enteroendocrine hormone secretion in STC-1 cells.

Table-Top Laser-Based Source of Femtosecond, Collimated, Ultrarelativistic Positron Beams

The generation of ultrarelativistic positron beams with short duration (τ_e⁺≃30 fs), small divergence (θ_e⁺≃3 mrad), and high density (n _e⁺≃1014-1015 cm^-3) from a fully optical setup is reported. The detected positron beam propagates with a high-density electron beam and γ rays of similar spectral shape and peak energy, thus closely resembling the structure of an astrophysical leptonic jet. It is envisaged that this experimental evidence, besides the intrinsic relevance to laser-driven particle acceleration, may open the pathway for the small-scale study of astrophysical leptonic jets in the laboratory. 

A table-top laser-based source of short, collimated, ultra-relativistic positron beams

An ultra-relativistic electron beam passing through a thick, high-Z solid target triggers an electromagnetic cascade, whereby a large number of high energy photons and electron-positron pairs are produced. By exploiting this physical process, we present here the first experimental evidence of the generation of ultra-short, highly collimated and ultra-relativistic positron beams following the interaction of a laser-wake field accelerated electron beam with high-Z solid targets. Clear evidence has also been obtained of the generation of GeV electron-positron jets with variable composition depending on the solid target material and thickness. The percentage of positrons in the overall leptonic beam has been observed to vary from a few per cent up to almost fifty per cent, implying a quasi-neutral electron-positron beam. We anticipate that these beams will be of direct relevance to the laboratory study of astrophysical leptonic jets and their interaction with the interstellar medium.

OpenFlow Multi-Table Lookup Architecture for Multi-Gigabit Software Defined Networking (SDN)

The proposed multi-table lookup architecture provides SDN-based, high-performance packet classification in an OpenFlow v1.1+ SDN switch. The objective of the demonstration is to show the functionality of the architecture deployed on the NetFPGA SUME Platform.

Memory Cost Analysis for OpenFlow Multiple Table Lookup

Multiple Table Lookup architectures in Software Defined Networking (SDN) open the door for exciting new network applications. The development of the OpenFlow protocol supported the SDN paradigm. However, the first version of the OpenFlow protocol specified a single table lookup model with the associated constraints in flow entry numbers and search capabilities. With the introduction of multiple table lookup in OpenFlow v1.1, flexible and efficient search to support SDN application innovation became possible. However, implementation of multiple table lookup in hardware to meet high performance requirements is non-trivial. One possible approach involves the use of multi-dimensional lookup algorithms. A high lookup performance can be achieved by using embedded memory for flow entry storage. A detailed study of OpenFlow flow filters for multi-dimensional lookup is presented in this paper. Based on a proposed multiple table lookup architecture, the memory consumption and update performance using parallel single field searches are evaluated. The results demonstrate an efficient multi-table lookup implementation with minimum memory usage.

Influence of Soil and Irrigation Management on the Quality of Seedless Crimson Table Grapes

The market for table grapes is moving into mass production of specialty seed-less grapes in covered areas, aiming at obtaining premium prices with early or late production of high quality products. Production of quality seedless grapes is not straightforward since it is requires the correct combination of various independent characteristics, such as color, sugars, size and quantity at the right moment for successful harvesting and marketing. The present study was carried out at the two largest Portuguese producers located in Alentejo, and has the objective of studying the effect of irrigation management strategies and two different soils on the various relevant parameters for successful production and marketing. The management strategies were the application of ten day stress at the end of the cycle, in order to promote early maturing of the grapes. Three different timings of the stress were applied. Soil moisture, sap flow, bark thickness, as well as leaf water potential, stomatal conductance and chlorophyll content were measured regularly during the production season. The results indicate that the roots explore a rather large soil volume and the plants can successfully withstand reasonable periods of drought without significant changes to the plant physiology. Additionally late rains can mask the effect of any farmer applied drought and invalidate any farmer induced stress to the plants. Water-logged soils tend to cause early onset of maturity, but cause the ripening stage to extend over a longer period of time, and thus, in effect result in a delay in the harvest date. Topography also has some effect on the ripening, since hot air tends to accumulate under the plastic at the higher areas of the field. This work is funded by PRODER, 4.1, within the scope of project MORECRIMSON

Relação do aroma e da espuma dos vinhos espumantes com o potencial enológico das uvas e dos vinhos

Os espumantes produzidos segundo o método Champanhês são obtidos após uma segunda fermentação em garrafa. Quando o vinho é vertido no copo, o CO2 produzido é libertado, sendo a espuma formada o resultado da sua interacção com os constituintes do vinho. A quantidade e a estabilidade da espuma do vinho espumante estão relacionadas com a sua composição química. Para além da espuma, o aroma é também um parâmetro importante de qualidade na apreciação geral de um vinho espumante. O aroma de um vinho espumante provém do contributo das uvas assim como do processo fermentativo. Dependendo do estado de maturação da uva, o contributo dos compostos voláteis para o aroma é diferente. Em virtude da vindima para os vinhos espumantes ser realizada antes da vindima para os vinhos maduros, dependendo da variedade, as uvas poderão não ser colhidas na expressão máxima do seu aroma, podendo verificar-se uma perda significativa do seu potencial varietal volátil. O objectivo desta dissertação é relacionar o aroma e a espuma dos vinhos espumantes com o potencial enológico das uvas e dos vinhos. Para isso, foi estudada a composição volátil das duas castas principais da Bairrada, a casta branca Fernão-Pires (FP) e a casta tinta Baga (BG), sendo estas duas das castas usadas para a produção de espumante. Para estudar a composição volátil das uvas durante a maturação, com vista a avaliar este efeito na expressão máxima de compostos voláteis, foi optimizada para este propósito a metodologia de microextracção em fase sólida em espaço de cabeça (HS-SPME). As uvas foram colhidas semanalmente, em duas vinhas, do pintor à pós-maturidade sendo posteriormente analisadas pela metodologia de HS-SPME seguida de cromatografia de gás acoplada à espectrometria de massa com quadrupolo (GC–qMS). No caso das uvas BG, observou-se um aumento acentuado na expressão máxima de compostos voláteis próximo da maturidade da uva determinada pelo teor em açúcar e acidez titulável, mantendo-se constante durante a pós-maturidade. Na determinação do perfil volátil das uvas ao longo da maturação foram identificados 66 compostos varietais nas uvas provenientes de uma vinha (Pedralvites) e 45 da outra vinha (Colégio). Em ambas as vinhas foram identificados 23 sesquiterpenóides, 13 monoterpenóides, 6 norisoprenóides, 2 álcoois aromáticos e 1 diterpenóide. Os sesquiterpenóides, devido à sua abundância em número e em área cromatográfica, podem ser considerados marcadores da casta BG. As uvas FP apresentaram um comportamento diferente do das uvas BG, sendo a expressão máxima de compostos voláteis expressa durante um curto período de tempo (1 semana), que coincide com a maturidade da uva. Depois de atingido este pico, observa-se uma diminuição drástica logo na semana seguinte. Este comportamento foi observado em ambas as vinhas, onde foram identificados 20 compostos voláteis varietais e 5 pré-fermentativos (álcoois e aldeídos em C6). Estes resultados mostram que quando estas castas são colhidas precocemente (1 semana antes da maturidade) para a produção de espumante, é observada uma redução significativa do potencial volátil que é expresso na maturidade. Para a análise da composição volátil dos vinhos espumantes foi optimizada uma metodologia de microextracção que permite usar uma maior quantidade de fase estacionária, a extracção sorptiva em barra de agitação (SBSE). O método foi optimizado usando 10 padrões de compostos voláteis representativos das principais famílias químicas presentes no vinho, nomeadamente, ésteres, monoterpenóides, sesquiterpenóides, norisoprenóides em C13 e álcoois. O método proposto apresenta uma boa linearidade (r2 > 0,982) e a reprodutibilidade varia entre 8,9 e 17,8%. Os limites de detecção para a maioria dos compostos é bastante baixo, entre 0,05 e 9,09 μg L-1. O método foi aplicado para a análise da composição volátil dos vinhos espumantes. Dentro dos vinhos espumantes analisados, foi estudada a influência da casta, do tipo de solo e do estado de maturação das uvas na sua composição volátil. A casta FP pode dar origem a vinhos com maior potencial de aroma do que a casta BG. Relativamente à avaliação dos diferentes estados de maturação, verificou-se que as uvas da maturidade e as da colheita tardia (uma semana depois da maturidade) deram origem aos vinhos com maior quantidade de compostos voláteis. Para os três tipos de solo estudados (arenoso, argiloso e argilo-calcário), o vinho obtido a partir de uvas colhidas no solo argilo-calcário foi o que mostrou a maior concentração de compostos voláteis varietais. A espuma destes vinhos espumantes foi também avaliada quanto à sua quantidade máxima (HM) e tempo de estabilidade (TS). O vinho espumante que apresentou um maior TS foi o vinho produzido a partir da casta FP proveniente de uma colheita tardia e solo argiloso. Os vinhos provenientes dos solos arenosos e argilo-calcários são os que apresentaram valores mais baixos de TS. Com vista a avaliar quais os conjuntos de moléculas do vinho que estão relacionados com as propriedades da espuma e possíveis sinergismos entre eles, para cada vinho espumante foi separada a fracção hidrofóbica de baixo peso molecular (MeLMW), a fracção de elevado peso molecular (HMW) e duas fracções de peso molecular intermédio (AqIMW e MeIMW). As propriedades da espuma dos vinhos modelo, reconstituídos com estas fracções e suas misturas, foram avaliadas. A combinação da fracção HMW com a MeLMW aumentou o TS 2,7 vezes quando comparado com o observado para a fracção HMW isoladamente, produzindo um efeito sinergético. Este aumento do TS ainda foi maior quando se combinou a fracção HMW com as subfracções obtidas a partir da fracção MeLMW, principalmente para as fracções menos apolares. A subfracção hidrofóbica menos apolar foi caracterizada por espectrometria de massa de ionização por electrospray (ESI-MS/MS) tendo sido identificada uma série de oligómeros de polietileno glicol e um potencial composto tensioactivo, o 8-hidroxi-tridecanoato de dietilenoglicolglicerilacetato. A fracção MeLMW foi também isolada da espuma do vinho espumante e caracterizada por ESI-MS/MS, permitindo identificar vários compostos potenciais tensioactivos, nomeadamente, dois monoacilgliceróis e quatro derivados de ácidos gordos com gliceriletilenoglicol. Estes resultados confirmam que estes compostos relacionados com a estabilidade da espuma existem em maior número na espuma do que no vinho. O vinho foi ainda fraccionado em 12 grupos de moléculas: 3 fracções de manoproteínas, 3 de arabinogalactanas, 3 de misturas de polissacarídeos, proteínas e compostos fenólicos e 3 fracções de peso molecular intermédio e baixo, compostas por uma mistura de hidratos de carbono, peptídeos e compostos fenólicos. Foram usados vinhos modelo reconstituídos com cada uma das fracções isoladas na concentração em que estas se encontraram no vinho. Foram também efectuados ensaios com soluções modelo dez vezes mais concentradas e com misturas de algumas das fracções. Todas as soluções formadas foram avaliadas quanto às propriedades da espuma. O aumento da concentração para dez vezes faz com que a solução contendo a fracção rica em manoproteínas (MP1) aumente para mais do dobro a HM e 7,4 vezes mais o TS. A combinação entre a fracção MP1 e a MeLMW produziu um aumento significativo nos parâmetros de HM e TS. A combinação da fracção HMW (manoproteínas com baixo teor em proteína) com a MeLMW (tensioactivos derivados de ácidos gordos com gliceriletilenoglicol) contém os compostos chave de um vinho espumante para se obter uma maior quantidade e estabilidade da espuma.

Seismic retrofitting of RC buildings using CFRP and post-tensioned metal straps: shake table tests

This article examines the effectiveness of two innovative retrofitting solutions at enhancing the seismic behaviour of a substandard reinforced concrete building tested on a shake table as part of the Pan-European funded project BANDIT. To simulate typical substandard construction, the reinforcement of columns and beam-column joints of the full-scale structure had inadequate detailing. An initial series of shake table tests were carried out to assess the seismic behaviour of the bare building and the effectiveness of a first retrofitting intervention using Post-Tensioned Metal Straps. After these tests, columns and joints were repaired and subsequently retrofitted using a retrofitting solution consisting of Carbon Fibre Reinforced Polymers and Post-Tensioned Metal Straps applied on opposite frames of the building. The building was then subjected to unidirectional and three-dimensional incremental seismic excitations to assess the effectiveness of the two retrofitting solutions at improving the global and local building performance. The article provides details of the above shake table testing programme and retrofitting solutions, and discusses the test results in terms of the observed damage, global damage indexes, performance levels and local strains. It is shown that whilst the original bare building was significantly damaged at a peak ground acceleration (PGA) of 0.15g, the retrofitted building resisted severe threedimensional shake table tests up to PGA=0.60g without failure. Moreover, the retrofitting intervention enhanced the interstorey drift ratio capacity of the 1st and 2nd floors by 160% and 110%, respectively. Therefore, the proposed dual retrofitting system is proven to be very effective for improving the seismic performance of substandard buildings.

Full-Scale Shaking Table Tests on a Substandard RC Building Repaired and Strengthened with Post-Tensioned Metal Straps

The effectiveness of a novel Post-Tensioned Metal Strapping (PTMS) technique at enhancing the seismic behaviour of a substandard RC building was investigated through full-scale shake-table tests during the EU-funded project BANDIT. The building had inadequate reinforcement detailing in columns and joints to replicate old construction practices. After the bare building was initially damaged significantly, it was repaired and strengthened with PTMS to perform additional seismic tests. The PTMS technique improved considerably the seismic performance of the tested building. Whilst the bare building experienced critical damage at an earthquake of PGA=0.15g, the PTMS-strengthened building sustained a PGA=0.35g earthquake without compromising stability.

Development of chitosan packaging films with carvacrol and grape seed extract as antimicrobial and antioxidant agents

In order to produce packaging films with a broad spectrum of action on microorganisms, the effect of two antimicrobial (AM) to be included in the films, carvacrol and GSE were studied separately on different microorganisms. Carvacrol was more effective against the grampositive bacteria than against the gram-negative bacterium. GSE was not effective against yeast. Subsequently, a search for optimal combinations of carvacrol, GSE and the addition of chitosan (as a third component with film forming properties) was carried out. Response surface analysis showed several synergetic effects and three optimal AM combinations (OAMC) were obtained for each microorganism. The experimental validation confirmed that the optimal solutions found can successfully predict the response for each microorganism. The optimization of mixtures of the three components, but this time, using the same concentration for all microorganisms, was also studied to obtain an OAMC with wide spectrum of activity. The results of the response surface analysis showed several synergistic effects for all microorganisms. Three OAMC, OAMC-1, OAMC-2, OAMC-3, were found to be the optimal mixtures for all microorganisms. The radical scavenging activity (RSA) of the different agents was then compared with a standard antioxidant (AOX) BHT, at different concentrations; as also at the OAMC. The RSA increased in the following order: chitosan

Invisible cities: the table of contents and the labyrinths of reality

In Invisible Cities (1972), Italo Calvino contrasts a rigid outline structure with a flexible textual content. The tension comprised by the numerical structure proposed in the table of contents stands out against the set of polissemic texts which make up the subject matter of the book. The opposition between form and content point to a fruitful dichotomy in the conception of the novel linked to the theories of the open and closed work. This essay will investigate the structural construction of Invisible Cities by looking at its table of contents, seeking to discuss some models of formalistic representation proposed by the criticism and the specific contribution they may, or may not, provide. The objective is to analyse the pertinence of such theories in the light of historical and cultural approaches. Aiming to uncover possible meanings which arise from the debate, this essay will question to what extent structural complexities can be considered literary if they are not ultimately related to the culture in which a text is found.

Wine and grape polyphenols — a chemical perspective

Phenolic compounds constitute a diverse group of secondary metabolites which are present in both grapes and wine. The phenolic content and composition of grape processed products (wine) are greatly influenced by the technological practice to which grapes are exposed. During the handling and maturation of the grapes several chemical changes may occur with the appearance of new compounds and/or disappearance of others, and consequent modification of the characteristic ratios of the total phenolic content as well as of their qualitative and quantitative profile. The non-volatile phenolic qualitative composition of grapes and wines, the biosynthetic relationships between these compounds, and the most relevant chemical changes occurring during processing and storage will be highlighted in this review.