El tomate en Gran Canaria: cultivo, empresa, aparcería y exportación (1930-1970): singularidad en la producción y exportación del tomate canario

Programa de Doctorado: Historiografía, fuentes y métodos de la investigación históricas

Vendemmia meccanica: aspettative, problematiche e risposte sperimentali

Lo vendemmia meccanica incontra ancora resistenze legate al timore di peggiorare la qualità del prodotto e di avere elevate perdite di raccolta. In questo contesto sono state effettuate quattro prove sperimentali, finalizzate a definire le interazioni macchina, pianta e prodotto raccolto e a valutare nuove possibilità di regolazione delle vendemmiatrici e di gestione del prodotto raccolto. Le prime due sono state realizzate con vendemmiatrici a scuotimento orizzontale e verticale. L’obiettivo è stato quello di individuare l’influenza della frequenza del battitore sull’efficienza di raccolta e sulla qualità del prodotto e di verificare il maltrattamento provocato dagli organi di intercettazione e trasporto della vendemmiatrice. I risultati hanno dimostrato l’importanza della corretta regolazione del battitore delle vendemmiatrici a scuotimento orizzontale che operano direttamente sulla fascia produttiva del vigneto. Questa regolazione risulta più semplice sulle macchine a scuotimento verticale che agiscono indirettamente sui fili di sostegno delle doppie cortine. La misura delle sollecitazioni all’interno della macchina ha evidenziato valori anche elevati, pericolosi per l’integrità del prodotto raccolto, legati alla differente costruzione degli organi d’intercettazione e trasporto. La terza prova ha valutato l’efficacia di due nuovi accessori per le vendemmiatrici: la regolazione dell’ampiezza del battitore e un sensore per misurare in continuo il grado di ammostamento provocato. I risultati hanno dimostrato la loro validità per migliorare le prestazioni operative delle vendemmiatrici e per fornire agli operatori uno strumento di controllo in tempo reale sulla qualità della raccolta. Infine, considerando che le vendemmiatrici producono sempre un ammostamento dell’uva, abbiamo verificato un sistema innovativo che permette di anticipare la protezione del mosto libero già durante il trasporto dal campo. Il sistema si è dimostrato semplice, efficace ed economico. Queste esperienze hanno dimostrano che la vendemmia meccanica, se correttamente gestita, permette di ottenere ottimi risultati sotto il profilo qualitativo, tecnologico ed economico.

Photophysical investigation of light-harvesting systems for solar-to-fuel conversion

In recent years, an increasing attention has been given to the optimization of the performances of new supramolecular systems, as antennas for light collection. In such background, the aim of this thesis was the study of multichromophoric architectures capable of performing such basic action. A synthetic antenna should consist of a structure with large UV-Vis absorption cross-section, panchromatic absorption, fixed orientation of the components and suitable energy gradients between them, in order to funnel absorbed energy towards a specific site, through fast energy-transfer processes. Among the systems investigated in this thesis, three suitable classes of compounds can be identified: 1) transition metal-based multichromophoric arrays, as models for antenna construction, 2) free-base trans-A2B-phenylcorroles, as self-assembling systems to make effective mimics of the photosynthetic system, and 3) a natural harvester, the Photosystem I, immobilized on the photoanode of a solar-to-fuel conversion device. The discussion starts with the description of the photophysical properties of dinuclear quinonoid organometallic systems, able to fulfil some of the above mentioned absorption requirements, displaying in some cases panchromatic absorption. The investigation is extended to the efficient energy transfer processes occurring in supramolecular architectures, suitably organized around rigid organic scaffolds, such as spiro-bifluorene and triptycene. Furthermore, the photophysical characterization of three trans-A2B-phenylcorroles with different substituents on the meso-phenyl ring is introduced, revealing the tendency of such macrocycles to self-organize into dimers, by mimicking natural self-aggregates antenna systems. In the end, the photophysical analysis moved towards the natural super-complex PSI-LHCI, immobilized on the hematite surface of the photoanode of a bio-hybrid dye-sensitized solar cell. The importance of the entire work is related to the need for a deep understanding of the energy transfer mechanisms occurring in supramolecules, to gain insights and improve the strategies for governing the directionality of the energy flow in the construction of well-performing antenna systems.

Charakterisierung der Proteine CEP164 und ppdpf sowie deren Einordnung in den mitotischen Kontext

Eine regelgerechte bipolare Mitose und die fehlerfreie Aufteilung duplizierter DNA ist die Voraussetzung für die Entwicklung aller Lebewesen. Treten Fehler bei diesem grundsätzlichen Prozess auf, ist entweder der Zelltod oder die maligne Entartung der Zelle die Folge. Daher ist es von zentraler Bedeutung, die Vorgänge während der Zellteilung zu verstehen und die Funktion der an diesem Prozess beteiligten Proteine aufzudecken. Im Vorfeld dieser Arbeit wurden im Rahmen eines siRNA-Screens genomweit alle Proteine durch RNA-Interferenz depletiert und die Mitosen nach erfolgter RNAi phänotypisch untersucht. Ein besonderes Augenmerk lag dabei auf der Entwicklung multipolarer Spindeln durch Defekte in der Zentrosomenbündelung. Dadurch wurden unter anderem die Proteine CEP164 und ppdpf identifiziert. Da weder für CEP164 noch für ppdpf mitotische Funktionen bekannt sind, war es Ziel dieser Arbeit, die beiden Proteine eingehender zu charakterisieren und in den Kontext der Mitose einzuordnen. rnIm Rahmen der vorliegenden Arbeit konnte gezeigt werden, dass CEP164 einer komplexen mitotischen Regulation unterliegt. Die in Interphase durchweg zentrosomale Lokalisation von CEP164 geht in der Mitose verloren. Es wird demonstriert, dass CEP164 während der Mitose unter anderem von CDK1 phosphoryliert wird und des Weiteren ubiquitinyliert wird. Als Interaktionspartner wurde das zentrosomale Protein Ninein identifiziert und demonstriert, dass sich CEP164 mit diesem in einem Komplex von ~2MDA befindet. Als weiterer Interaktionspartner wurde das Ninein-like-Protein ermittelt. Im Hinblick auf die Induktion multipolarer Mitosen wurde gezeigt, dass die Depletion von CEP164 nicht dafür verantwortlich ist. Die Induktion multipolarer Spindeln ist stattdessen darin begründet, dass durch die Transfektion einer siRNA gegen CEP164 auch ein für die Ausbildung der mitotischen Spindel elementares Protein, Ch-TOG, depletiert wird.rnIm Gegensatz dazu wurde im Rahmen dieser Arbeit bestätigt, dass das Protein ppdpf eine wichtige mitotische Funktion übernimmt. Zwar führt die Depletion von ppdpf nur zu einer sehr geringen Zunahme multipolarer Mitosen, allerdings steigt die Zahl aberranter Mitosen deutlich an, während die Spannung innerhalb mitotischer Spindeln abnimmt. Desweiteren konnte nachgewiesen werde, dass ppdpf-RNAi die Entwicklung von „lagging chromosomes“ und nachfolgend von Mikrokernen begünstigt. Es wurde gezeigt, dass ppdpf während der Mitose an Spindelmikrotubuli lokalisiert und spezifisch acetyliertes Tubulin bindet. Diese Interaktion hatte allerdings keinen Einfluss auf die Stabilität von Mikrotubuli während der Mitose. Das Protein ppdpf interagiert zudem mit dem Kinesin Eg5, wobei ppdpf-RNAi allerdings nicht zu einer Modulation der Aktivität von Eg5 zu führen scheint. Inwiefern diese Eigenschaften die Entwicklung von „lagging chromosomes“ begünstigen ist derzeit noch offen.

Biologischer Lichtsammler (LHCII) für Halbleiternanokristalle (Quantum Dots)

Der light harvesting complex II (LHCII) ist ein pflanzliches Membranprotein, das in seiner trimeren Form über 40 Chlorophylle bindet. In der Pflanze kann er besonders effizient Licht sammeln und die Anregungsenergie anschließend fast verlustfrei über andere chlorophyll-bindende Proteine an die Reaktionszentren weiterleiten. Aufgrund dieser besonderen Eigenschaften war es ein Ziel dieser Arbeit, rekombinanten LHCII mit synthetischen Komponenten zu kombinieren, die zur Ladungstrennung befähigt sind. Zu diesem Zweck wurden unter anderem Halbleiternanokristalle (Quantum Dots, QDs) ausgewählt, die je nach Zusammensetzung sowohl als Energieakzeptoren als auch als Energiedonoren in Frage kamen. Durch Optimierung des Puffers gelang es, die Fluoreszenzquantenausbeute der QDs in wässriger Lösung zu erhöhen und zu stabilisieren, so dass die Grundvoraussetzungen für die spektroskopische Untersuchung verschiedener LHCII-QD-Hybridkomplexe erfüllt waren.rnUnter Verwendung bereits etablierter Affinitätssequenzen zur Bindung des LHCII an die QDs konnte gezeigt werden, dass die in dieser Arbeit verwendeten Typ-I QDs aus CdSe und ZnS sich kaum als Energie-Donoren für den LHCII eignen. Ein Hauptgrund lag im vergleichsweise kleinen Försterradius R0 von 4,1 nm. Im Gegensatz dazu wurde ein R0 von 6,4 nm für den LHCII als Donor und Typ-II QDs aus CdTe, CdSe und ZnS als Akzeptor errechnet, wodurch in diesem System eine höhere Effizienz des Energietransfers zu erwarten war. Fluoreszenzspektroskopische Untersuchungen von Hybridkomplexen aus LHCII und Typ-II QDs ergaben eine hohe Plausibilität für einen Fluoreszenz Resonanz Energietransfer (FRET) vom Lichtsammler auf die QDs. Weitere QD-Affinitätssequenzen für den LHCII wurden identifiziert und deren Bindekonstanten ermittelt. Versuche mit dem Elektronenakzeptor Methylviologen lieferten gute Hinweise auf eine LHCII-sensibilisierte Ladungstrennung der Typ-II QDs, auch wenn dies noch anhand alternativer Messmethoden wie z.B. durch transiente Absorptionsspektroskopie bestätigt werden muss. rnEin weiteres Ziel war die Verwendung von LHCII als Lichtsammler in dye-sensitized solar cells (DSSC). Geeignete dotierte TiO2-Platten wurden ermittelt, das Verfahren zur Belegung der Platten optimiert und daher mit wenig Aufwand eine hohe LHCII-Belegungsdichte erzielt. Erste Messungen von Aktionsspektren mit LHCII und einem zur Ladungstrennung fähigen Rylenfarbstoff zeigen eine, wenn auch geringe, LHCII sensibilisierte Ladungstrennung. rnDie Verwendung von Lanthanide-Binding-Tags (LBTs) ist ein potentielles Verfahren zur in vivo-Markierung von Proteinen mit Lanthanoiden wie Europium und Terbium. Diese Metalle besitzen eine überdurchschnittlich lange Lumineszenzlebensdauer, so dass sie leicht von anderen fluoreszierenden Molekülen unterschieden werden können. Im Rahmen der vorliegenden Arbeit gelang es, eine LBT in rekombinanten LHCII einzubauen und einen Lumineszenz Resonanz Energietransfer (LRET) vom Europium auf den LHCII nachzuweisen.rn

Holocentric chromosomes: convergent evolution, meiotic adaptations, and genomic analysis

In most eukaryotes, the kinetochore protein complex assembles at a single locus termed the centromere to attach chromosomes to spindle microtubules. Holocentric chromosomes have the unusual property of attaching to spindle microtubules along their entire length. Our mechanistic understanding of holocentric chromosome function is derived largely from studies in the nematode Caenorhabditis elegans, but holocentric chromosomes are found over a broad range of animal and plant species. In this review, we describe how holocentricity may be identified through cytological and molecular methods. By surveying the diversity of organisms with holocentric chromosomes, we estimate that the trait has arisen at least 13 independent times (four times in plants and at least nine times in animals). Holocentric chromosomes have inherent problems in meiosis because bivalents can attach to spindles in a random fashion. Interestingly, there are several solutions that have evolved to allow accurate meiotic segregation of holocentric chromosomes. Lastly, we describe how extensive genome sequencing and experiments in nonmodel organisms may allow holocentric chromosomes to shed light on general principles of chromosome segregation.

Sleep stage II contributes to the consolidation of declarative memories

Various studies suggest that non-rapid eye movement (NREM) sleep, especially slow-wave sleep (SWS), is vital to the consolidation of declarative memories. However, sleep stage 2 (S2), which is the other NREM sleep stage besides SWS, has gained only little attention. The current study investigated whether S2 during an afternoon nap contributes to the consolidation of declarative memories. Participants learned associations between faces and cities prior to a brief nap. A cued recall test was administered before and following the nap. Spindle, delta and slow oscillation activity was recorded during S2 in the nap following learning and in a control nap. Increases in spindle activity, delta activity, and slow oscillation activity in S2 in the nap following learning compared to the control nap were associated with enhanced retention of face-city associations. Furthermore, spindles tended to occur more frequently during up-states than down-states within slow oscillations during S2 following learning versus S2 of the control nap. These findings suggest that spindles, delta waves, and slow oscillations might promote memory consolidation not only during SWS, as shown earlier, but also during S2.

Energy harvesting from the beating heart by a mass imbalance oscillation generator

Energy-harvesting devices attract wide interest as power supplies of today's medical implants. Their long lifetime will spare patients from repeated surgical interventions. They also offer the opportunity to further miniaturize existing implants such as pacemakers, defibrillators or recorders of bio signals. A mass imbalance oscillation generator, which consists of a clockwork from a commercially available automatic wrist watch, was used as energy harvesting device to convert the kinetic energy from the cardiac wall motion to electrical energy. An MRI-based motion analysis of the left ventricle revealed basal regions to be energetically most favorable for the rotating unbalance of our harvester. A mathematical model was developed as a tool for optimizing the device's configuration. The model was validated by an in vitro experiment where an arm robot accelerated the harvesting device by reproducing the cardiac motion. Furthermore, in an in vivo experiment, the device was affixed onto a sheep heart for 1 h. The generated power in both experiments-in vitro (30 μW) and in vivo (16.7 μW)-is sufficient to power modern pacemakers.

Sleep-wake disturbances in sporadic Creutzfeldt-Jakob disease

BACKGROUND: The prevalence and characteristics of sleep-wake disturbances in sporadic Creutzfeldt-Jakob disease (sCJD) are poorly understood. METHODS: Seven consecutive patients with definite sCJD underwent a systematic assessment of sleep-wake disturbances, including clinical history, video-polysomnography, and actigraphy. Extent and distribution of neurodegeneration was estimated by brain autopsy in six patients. Western blot analyses enabling classification and quantification of the protease-resistant isoform of the prion protein, PrPSc, in thalamus and occipital cortex was available in four patients. RESULTS: Sleep-wake symptoms were observed in all patients, and were prominent in four of them. All patients had severe sleep EEG abnormalities with loss of sleep spindles, very low sleep efficiency, and virtual absence of REM sleep. The correlation between different methods to assess sleep-wake functions (history, polysomnography, actigraphy, videography) was generally poor. Brain autopsy revealed prominent changes in cortical areas, but only mild changes in the thalamus. No mutation of the PRNP gene was found. CONCLUSIONS: This study demonstrates in sporadic Creutzfeldt-Jakob disease, first, the existence of sleep-wake disturbances similar to those reported in fatal familial insomnia in the absence of prominent and isolated thalamic neuronal loss, and second, the need of a multimodal approach for the unambiguous assessment of sleep-wake functions in these patients.

Visual and quantitative electroencephalographic analysis of healthy young and adult cats under medetomidine sedation

A study was designed to investigate the effect of medetomidine sedation on quantitative electroencephalography (q-EEG) in healthy young and adult cats to determine objective guidelines for diagnostic EEG recordings and interpretation. Preliminary visual examination of EEG recordings revealed high-voltage low-frequency background activity. Spindles, k-complexes and vertex sharp transients characteristic of sleep or sedation were superimposed on a low background activity. Neither paroxysmal activity nor EEG burst-suppression were observed. The spectral analysis of q-EEG included four parameters, namely, relative power (%), and mean, median and peak frequency (Hz) of all four frequency bands (delta, theta, alpha and beta). The findings showed a prevalence of slow delta and theta rhythms as opposed to fast alpha and beta rhythms in both young (group A) and adult (group B) cats. A posterior gradient was reported for the theta band and an anterior gradient for the alpha and beta bands in both groups, respectively. The relative power value in group B compared to group A was significantly higher for theta, alpha and beta bands, and lower for the delta band. The mean and median frequency values in group B was significantly higher for delta, theta and beta bands and lower for the alpha band. The study has shown that a medetomidine sedation protocol for feline EEG may offer a method for investigating bio-electrical cortical activity. The use of q-EEG analysis showed a decrease in high frequency bands and increased activity of the low frequency band in healthy cats under medetomidine sedation.

Energy harvesting from body motion using rotational micro-generation

Autonomous system applications are typically limited by the power supply operational lifetime when battery replacement is difficult or costly. A trade-off between battery size and battery life is usually calculated to determine the device capability and lifespan. As a result, energy harvesting research has gained importance as society searches for alternative energy sources for power generation. For instance, energy harvesting has been a proven alternative for powering solar-based calculators and self-winding wristwatches. Thus, the use of energy harvesting technology can make it possible to assist or replace batteries for portable, wearable, or surgically-implantable autonomous systems. Applications such as cardiac pacemakers or electrical stimulation applications can benefit from this approach since the number of surgeries for battery replacement can be reduced or eliminated. Research on energy scavenging from body motion has been investigated to evaluate the feasibility of powering wearable or implantable systems. Energy from walking has been previously extracted using generators placed on shoes, backpacks, and knee braces while producing power levels ranging from milliwatts to watts. The research presented in this paper examines the available power from walking and running at several body locations. The ankle, knee, hip, chest, wrist, elbow, upper arm, side of the head, and back of the head were the chosen target localizations. Joints were preferred since they experience the most drastic acceleration changes. For this, a motor-driven treadmill test was performed on 11 healthy individuals at several walking (1-4 mph) and running (2-5 mph) speeds. The treadmill test provided the acceleration magnitudes from the listed body locations. Power can be estimated from the treadmill evaluation since it is proportional to the acceleration and frequency of occurrence. Available power output from walking was determined to be greater than 1mW/cm³ for most body locations while being over 10mW/cm³ at the foot and ankle locations. Available power from running was found to be almost 10 times higher than that from walking. Most energy harvester topologies use linear generator approaches that are well suited to fixed-frequency vibrations with sub-millimeter amplitude oscillations. In contrast, body motion is characterized with a wide frequency spectrum and larger amplitudes. A generator prototype based on self-winding wristwatches is deemed to be appropriate for harvesting body motion since it is not limited to operate at fixed-frequencies or restricted displacements. Electromagnetic generation is typically favored because of its slightly higher power output per unit volume. Then, a nonharmonic oscillating rotational energy scavenger prototype is proposed to harness body motion. The electromagnetic generator follows the approach from small wind turbine designs that overcome the lack of a gearbox by using a larger number of coil and magnets arrangements. The device presented here is composed of a rotor with multiple-pole permanent magnets having an eccentric weight and a stator composed of stacked planar coils. The rotor oscillations induce a voltage on the planar coil due to the eccentric mass unbalance produced by body motion. A meso-scale prototype device was then built and evaluated for energy generation. The meso-scale casing and rotor were constructed on PMMA with the help of a CNC mill machine. Commercially available discrete magnets were encased in a 25mm rotor. Commercial copper-coated polyimide film was employed to manufacture the planar coils using MEMS fabrication processes. Jewel bearings were used to finalize the arrangement. The prototypes were also tested at the listed body locations. A meso-scale generator with a 2-layer coil was capable to extract up to 234 µW of power at the ankle while walking at 3mph with a 2cm³ prototype for a power density of 117 µW/cm³. This dissertation presents the analysis of available power from walking and running at different speeds and the development of an unobtrusive miniature energy harvesting generator for body motion. Power generation indicates the possibility of powering devices by extracting energy from body motion.

Clonal Evolution and Blast Crisis Correlate with Enhanced Proteolytic Activity of Separase in BCR-ABL b3a2 Fusion Type CML under Imatinib Therapy.

Unbalanced (major route) additional cytogenetic aberrations (ACA) at diagnosis of chronic myeloid leukemia (CML) indicate an increased risk of progression and shorter survival. Moreover, newly arising ACA under imatinib treatment and clonal evolution are considered features of acceleration and define failure of therapy according to the European LeukemiaNet (ELN) recommendations. On the basis of 1151 Philadelphia chromosome positive chronic phase patients of the randomized CML-study IV, we examined the incidence of newly arising ACA under imatinib treatment with regard to the p210BCR-ABL breakpoint variants b2a2 and b3a2. We found a preferential acquisition of unbalanced ACA in patients with b3a2 vs. b2a2 fusion type (ratio: 6.3 vs. 1.6, p = 0.0246) concurring with a faster progress to blast crisis for b3a2 patients (p = 0.0124). ESPL1/Separase, a cysteine endopeptidase, is a key player in chromosomal segregation during mitosis. Separase overexpression and/or hyperactivity has been reported from a wide range of cancers and cause defective mitotic spindles, chromosome missegregation and aneuploidy. We investigated the influence of p210BCR-ABL breakpoint variants and imatinib treatment on expression and proteolytic activity of Separase as measured with a specific fluorogenic assay on CML cell lines (b2a2: KCL-22, BV-173; b3a2: K562, LAMA-84). Despite a drop in Separase protein levels an up to 5.4-fold increase of Separase activity under imatinib treatment was observed exclusively in b3a2 but not in b2a2 cell lines. Mimicking the influence of imatinib on BV-173 and LAMA-84 cells by ESPL1 silencing stimulated Separase proteolytic activity in both b3a2 and b2a2 cell lines. Our data suggest the existence of a fusion type-related feedback mechanism that posttranslationally stimulates Separase proteolytic activity after therapy-induced decreases in Separase protein levels. This could render b3a2 CML cells more prone to aneuploidy and clonal evolution than b2a2 progenitors and may therefore explain the cytogenetic results of CML patients.

Characterization of cellular and molecular functions of the p21 -activated kinase, Shk1, in the fission yeast, Schizosaccharomyces pombe

The p21-activated kinase, Shk1, is an essential serine/threonine kinase required for normal cell polarity, proper mating response, and hyperosmotic stress response, in the fission yeast, Schizosaccharomyces pombe. This study has established a novel role for Shk1 as a microtubule regulator in fission yeast and, in addition, characterized a potential biological substrate of Shk1. Cells defective in Shk1 function were found to exhibit malformed interphase and mitotic microtubules, are hypersensitive to the microtubule disrupting drug thiabendazole (TBZ), and are cold sensitive for growth. Microtubule disruption by TBZ results in a significant reduction of Shk1 kinase activity, which is restored after cells are released from the drug, thus providing a correlation between Shk1 kinase activity and active microtubule polymerization. Consistent with a role for Shk1 as a microtubule regulator, GFP-Shk1 fusion proteins localize to interphase microtubules and mitotic microtubule spindles. Furthermore, loss of Tea1, a presumptive microtubule regulator in fission yeast, exacerbates the growth and microtubule defects of cells deficient in Shk1 function, and results in illicit Shk1 localization. Moreover, loss of the Cdc2 inhibitory kinase Wee1, which has been implicated as a mediator of the Shk1 pathway, leads to significant microtubule defects. Intriguingly, Wee1 protein levels are markedly reduced both by partial loss of Shk1 function and by treatment with TBZ. These results suggest that Shk1 is required for proper regulation of microtubule dynamics in fission yeast and may interact with Tea1 and Wee1 in this regulatory process. ^ To further understand Shk1 function in fission yeast, a yeast two-hybrid screen for proteins that interact with the Shk1 catalytic domain was performed. This screen led to the identification of a novel protein, Skb10 (for S&barbelow;hk1 k&barbelow;inase b&barbelow;inding protein 10). Coprecipitation experiments demonstrated that Skb10 associates with Shk1 in S. pombe cells. (Abstract shortened by UMI.) ^

Rastrojo de arroz (Oryza sativa L.) en sistemas de siembra directa : alternativas de manejo

Los objetivos principales del presente trabajo fueron: a) Estudiar cuál es el uso adecuado de las distintas herramientas para mejorar la mineralización del rastrojo de la cosecha de arroz (Oryza sativa L.) bajo siembra directa y b) Determinar, para períodos cortos, la cantidad de rastrojo depositado superficialmente y su tiempo de mineralización al utilizar las distintas técnicas de manejo del mismo. Los tratamientos fueron: cosechadora con desparramador deflector (T1DD), cosechadora sin desparramador triturador (T2SDT), cosechadora con desparramador centrífugo de caucho (T3DC) y cosechadora con desparramador metálico (T4DM). Alternativas implementadas: a) desmalezado b) rolo cuchilla y c) quemado de rastrojo. En las primeras dos alternativas, se aplicaron tres dosis de urea. Los resultados principales fueron: a) La T2SDT produjo, una mayor deposición de material en el centro de la máquina (21680 kg ha-1), b) la distribución de rastrojo de la (T3DC) fue más uniforme que para los otros tratamientos. Las principales conclusiones fueron: 1) Los desparramadores centrífugos de caucho y metálico produjeron mejor distribución del material, 2) El uso de desmalezadora o rolo cuchilla sobre rastrojo de los tratamientos T3DC y T4DM aceleró la mineralización de los mismos. 3) Las dosis de urea causó poco incremento en la mineralización del rastrojo.