Smart News, Issue 8, Spring 2002

Newsletter for Economic Development

Smart News, Issue 9, 2003

Newsletter for Economic Development.

Early detection of microcirculatory perfusion changes with a high resolution, real time laser Doppler imaging camera--frostbite case study.

A 41-year-old male presented with severe frostbite that was monitored clinically and with a new laser Doppler imaging (LDI) camera that records arbitrary microcirculatory perfusion units (1-256 arbitrary perfusion units (APU's)). LDI monitoring detected perfusion differences in hand and foot not seen visually. On day 4-5 after injury, LDI showed that while fingers did not experience any significant perfusion change (average of 31±25 APUs on day 5), the patient's left big toe did (from 17±29 APUs day 4 to 103±55 APUs day 5). These changes in regional perfusion were not detectable by visual examination. On day 53 postinjury, all fingers with reduced perfusion by LDI were amputated, while the toe could be salvaged. This case clearly demonstrates that insufficient microcirculatory perfusion can be identified using LDI in ways which visual examination alone does not permit, allowing prognosis of clinical outcomes. Such information may also be used to develop improved treatment approaches.

SMART News, Summer 2006

News from the Iowa Careers Consortium

La Cantata a Europa a l’entorn del segle XVIII : música da camera italiana del Barroc tardà

La cantata da camera italiana va tenir el seu màxim esplendor durant el segle XVII i principis del XVIII. A partir de l’anàlisi d’obres de quatre compositors (Albinoni, Scarlatti, Caldara i Vivaldi) s’estudia l’evolució d’aquesta forma, els seus orígens i la seva interpretació, fent especial atenció al text i a l’ornamentació.

Assinatura Digital Foco Smart Card

A assinatura digital é um processo de assinatura electrónica baseado no sistema criptográfico assimétrico composto por um algoritmo ou série de algoritmos, mediante o qual é gerado um par de chaves assimétricas exclusivas e complementares. Tal como a assinatura manuscrita, a assinatura digital não pode ser falsificada, pelo que se adiciona uma função hash ao valor da chave gerada, para garantir a segurança do sistema. A assinatura digital permite, ao mesmo tempo, a identificação positiva do autor de uma mensagem (ou do signatário de um documento) e a verificação da integridade da mesma. Refira-se, porém, que a assinatura digital pode ser anexa a qualquer mensagem, seja esta decifrada ou não, apenas para que o receptor tenha a certeza da identidade do emissor e de que a mensagem chegou intacta ao destino. Baseia-se na criptografia da chave pública, que usa um algoritmo de duas chaves, a privada e a pública, diferentes mas matematicamente associadas: a primeira cria a assinatura digital e decifra os dados; a segunda verifica a assinatura e devolve-a ao formato original. O autor da mensagem mantém secreta a sua chave privada e divulga a chave pública, e vice-versa. A identidade do dono da chave pública é atestada pelo certificado digital emitido por uma entidade certificadora (uma espécie de notário). Independentemente da forma que assume, a assinatura electrónica, e a digital em particular, deve cumprir três funções: a autenticação (tal como acontece com o habitual gatafunho a que chamamos assinatura, apenas o indivíduo deve ser capaz de a reproduzir); não repudiação (quando o indivíduo assina não pode voltar atrás); e integridade (é necessário assegurar que os documentos assinados não são alterados sem o consentimento dos signatários).

Una Red de Sensores para las Smart Cities

El objetivo del trabajo fin de Master consiste en el estudio de redes de sensores inalámbricos para las Smart Cities. En particular, se implementa una red inalámbrica (tecnología ZIGBEE como protocolo de comunicación inalámbrica con micrófonos como sensores, para recolectar niveles de ruido. Hemos elegido el Arduino como plataforma de cálculo para controlar cada nodo, y XBee como módulos de comunicación inalámbrico. La red sensorial cuenta con tres nodos sensores que capturan el ruido y lo envían a un nodo receptor, que hace de estación central encargado de monitorizar los niveles de ruido. Dicho coordinador está conectado mediante USB a un PC, donde podemos comprobar las medidas recibidas por el XBee. Finalmente estos datos se muestran en una interfaz gráfica en el computador conectado al coordinador. De esta forma, puede monitorizarse el nivel de ruido de tres lugares diferentes en tiempo real.

Artificial Urinary Sphincter based on smart materials

Objective: There are only a few established artificial urinary sphincters for treatment of incontinence. We have developed a new device composed by three parts: the actuator, three contractile rings and a control unit. The actuator is made of Nitinol fibers, driven by microprocessor. The fibers are linked to the rings placed around the urethra. They function with alternance in their open and closed position. This concept is called piano concept. With this set-up, the constant compression on the urethra is strongly reduced. Methods: Six male sheep have been used for this study. The sphincter was open each hour for a period of 10 min., to guaranty urination. The bladder was filled with water while one cuff was closed and bladder pressure was monitored. The animals were sacrificed. Two biopsies around two cuffs of each explant and all three cuffs from each explant including urethra were analyzed. Urethra not surrounded by a cuff was taken as control. Results: The pressure exerted by the sphincter around the urethra provided continence. Simulated incontinence occurred at a pressure of 1bar measured on the bladder wall using a pressure probe. The closing force of the cuff was approx. 0·7N. No difference in tissue structure and organization of the urethra with and without artificial sphincter was observed. Conclusions: This device has several advantages compared to other urinary sphincters. It is easy to implant, has no hydraulic nature and reduces ischemic injury of the urethra by the alternance of urethral part compressed. Proof of concept in vivo has been demonstrated. Other studies are planned to determine long-term outcome.

Comparison of fundus autofluorescence between fundus camera (Topcon) and confocal scanning laser ophthalmoscope (HRA) in various pathologies

Purpose: To investigate the differences between Fundus Camera (Topcon TRC-50X) and Confocal Scanning Laser Ophthalmoscope (Heidelberg retina angiogram (HRA)) on the fundus autofluorescence (FAF) imaging (resolution and FAF characteristics). Methods: 105 eyes of 56 patients with various retinal diseases underwent FAF imaging with HRA (488nm exciter/500nm barrier filter) before fluorescein angiography (FFA) and Topcon Fundus Camera (580nm exciter/695nm barrier filter) before and after FFA. The quality of the FAF images was compared for their resolution and analysed for the influence of fixation stability and cataracts. Hypo-and hyper-FAF behaviour was analysed for the healthy disc, healthy fovea, and a variety of pathological features. Results: HRA images were found to be of superior resolution in 18, while Topcon images were estimated superior in 29 eyes. No difference was found in 58 eyes. Both poor fixation (p=0.009) and more advanced cataract (p=0.013) were found associated with better image quality by Topcon. Images acquired by Topcon before and after FFA were identical (100%). The healthy disc was usually dark on HRA (72%), but showed mild autofluorescence on Topcon (85%). The healthy fovea showed in 100% Hypo-FAF on HRA, while Topcon showed in 53% Iso-FAF, in 43% mild Hypo-FAF, and in 4% Hypo-FAF as on HRA. No difference of FAF was found for geographic atrophy, pigment changes, and drusen, although Topcon images were often more detailed. Hyper-FAF due to serous exudation showed better on HRA. Cystic edema was visible only on HRA in a petaloid hyper-FAF pattern in 83%, while only two eyes (17%) showed similar behavior in both HRA- and Topcon images. Hard exudates caused Hypo-FAF only on HRA, hardly visible on Topcon. Blockage phenomenon by blood however was identical. Conclusions: The filter set of Topcon and the single image acquisition appear to be an advantage for patients with cataract and poor fixation respectively. Preceding FFA does not alter the Topcon FAF image. Regarding the FAF behavior, there are differences between the 2 systems which need to be taken into account when interpreting the images.

Iowa Smart Planning Task Force Report

In the 2010 legislative session, the General Assembly passed and the Governor signed into law Senate File 2389 (SF 2389), which provided guidance for Smart Planning in Iowa and established the Iowa Smart Planning Task Force. This Task Force was charged with recommending policies and strategies for creating a stronger planning culture in Iowa, producing more resilient and sustainable communities. The Task Force, along with its two committees and four workgroups, met throughout the summer and fall of 2010 to identify and review best practices, consult local and national experts, and craft recommendations in the best interest of Iowans. A public input process was also implemented, resulting in improved recommendations.

A reusable smart interface for gas sensor resistance measurement

The advances of the semiconductor industry enable microelectromechanical systems sensors, signal conditioning logic and network access to be integrated into a smart sensor node. In this framework, a mixed-mode interface circuit for monolithically integrated gas sensor arrays was developed with high-level design techniques. This interface system includes analog electronics for inspection of up to four sensor arrays and digital logic for smart control and data communication. Although different design methodologies were used in the conception of the complete circuit, high-level synthesis tools and methodologies were crucial in speeding up the whole design cycle, enhancing reusability for future applications and producing a flexible and robust component.

Application of a floating well concept to a latch-up-free, low-cost, smart power high-side switch technology

The aim of this brief is to present an original design methodology that permits implementing latch-up-free smart power circuits on a very simple, cost-effective technology. The basic concept used for this purpose is letting float the wells of the MOS transistors most susceptible to initiate latch-up.