Resistance to the anticoagulant rodenticides – the deployment of the new molecular methodology to identify mutations of the VKORC1 ‘resistance gene’, and understanding their potential impact on treatment outcome

Anticoagulants rodenticides have already known for over half a century, as effective and safe method of rodent control. However, discovered in 1958 anticoagulant resistance has given us a very important problem for their future long-term use. Laboratory tests provide the main method for identification the different types of anticoagulant resistances, quantify the magnitude of their effect and help us to choose the best pest control strategy. The main important tests are lethal feeding period (LFP) and blood clotting response (BCR) tests. These tests can now be used to quantify the likely effect of the resistance on treatment outcome by providing an estimate of the ‘resistance factor’. In 2004 the gene responsible for anticoagulant resistance (VKORC1) was identified and sequenced. As a result, a new molecular resistance testing methodology has been developed, and a number of resistance mutations, particularly in Norway rats and house mice. Three mutations of the VKORC1 gene in Norway rats have been identified to date that confer a degree of resistance to bromadiolone and difenacoum, sufficient to affect treatment outcome in the field.

Resistance to cypermethrin, deltamethrin and chlorpyriphos in populations of Rhipicephalus (Boophilus) microplus (Acari: Ixodidae) from small farms of the State of Sao Paulo, Brazil

A field survey of resistance was conducted based on the larval packet test technique with synthetic pyrethroids (cypermethrin and deltamethrin) and organophosphates (chlorpyriphos) in Rhipicephalus (Boophilus) microplus field populations from six different regions of the State of Sao Paulo (Brazil). 82.6% of the populations showed resistance to cypermethrin, 86.36% to deltamethrin and 65.25% to chlorpyriphos, with 50% presenting resistance to both SP and OP acaricide. According to the questionnaires completed by the producers, OP + SP mixtures followed by SP-only formulations were the products most commonly used for controlling the cattle tick in the surveyed areas. The present study showed high occurrence of resistance to SP and OP in the State of Sao Paulo, Brazil and revealed the type of strategy adopted by small dairy farms in this state. This information is fundamental in order to establish the monitoring of resistance on each farm individually, contributing to the rational use of acaricides for the control of R. (B.) microplus. (C) 2011 Elsevier B.V. All rights reserved.

Diagnoses of fipronil resistance in Brazilian cattle ticks (Rhipicephalus (Boophilus) microplus) using in vitro larval bioassays

Fipronil is a phenylpyrazolic insecticide that is widely used in agriculture and has been recently used to control the cattle tick, Rhipicephalus (Boophilus) microplus. Because of the serious problems associated with resistance to the available acaricides, this product has been used as an important alternative to control acaricide-resistant ticks. The objective of this work was to analyse the fipronil sensitivity of ticks that were collected from farms with a history of fipronil use by larval bioassays. A total of 11 Brazilian tick populations were studied: one population from Rio Grande do Sul, one population from Mato Grosso do Sul and nine populations from Sao Paulo. To validate the assays, susceptible reference strains, POA (Porto Alegre, Brazil) and Mozo (Dilave, Uruguay), and ticks from six different farms that never used fipronil were tested. The resistance of various tick populations to technical grade fipronil (95.3%) was primarily evaluated using the larvae immersion test (LIT) and the larval packet test (LPT), when a sufficient number of larvae was collected. Using the LIT, the resistance ratios (RR(50)) of the tick populations from Rio Grande do Sul and Mato Grosso do Sul were 14.9 and 2.6, respectively, and the populations derived from Sao Paulo had RR(50)s ranging from 2.5 to 6.9. Four populations were evaluated with the LPT, and two populations displayed lower RR(50), while other populations displayed higher RR(50) than those determined by the LIT. This article reports the first cases of fipronil resistance in Brazil and highlights the LIT as a more sensitive technique for the evaluation of fipronil resistance in R. (B) microplus ticks. We suggest the use of the LIT as an evaluation tool for monitoring fipronil resistance in the control programmes of R. (B) microplus. (C) 2010 Elsevier B.V. All rights reserved.

Brytmånens utformning vid trädfällning - Jämförande studier av böjmotstånd och gångjärnseffekt : Designing felling hinge in tree felling - Comparative studies of bending resistance and hinge effect

Vid trädfällning med motorsåg sparar man en så kallad brytmån som skall fungera som ett gång¬järn när trädet fälls. Om brytmånen går av tidigt finns en risk att trädet faller okontrolle¬rat. De rekommendationer som finns säger att brytmånens bredd skall göras proportionell mot trädets diameter. Genom att teoretiskt och praktiskt undersöka vilka krafter brytmånen utsätts för och vad den håller för har det varit möjligt att dra vissa slutsatser om hur en bra brytmån skall se ut. Ett viktigt resultat är att en bred brytmån (över 30-40 mm) är mycket trög att böja och inte fungerar i det avseendet att den går av redan vid små böjningar. Teoretiska be¬räkningar och praktiska försök visar att en relativt smal brytmån håller för belastningen vid rakt motlut även på stora träd. Som ny rekommendationen föreslås att brytmånens bredd inte bör vara mer än 30 mm. Av försöken kan man också dra slutsatsen att frusen ved är stel och brister tidigt, varför svår¬fällda träd inte bör fällas när veden är fryst.A felling hinge is used when felling trees by help of chain saw. If the hinge breaks early in the fall of the tree there is a great risk that the tree will fall without control. Present recommenda¬tions in Sweden say that the thickness of the felling hinge shall be made in proportion to the stem diameter. By use of theoretical and practical examinations of the forces stressing the felling hinge, and the strength of the wood itself, it has been possible to draw conclusions regarding the correct design of a felling hinge. One important result is that a thick felling hinge (over 30-40 mm) is very hard to bend and does not work well as it looses most of its strength already at a small forward bending angel. Theoretical calculations and practical tests show that a relatively narrow felling hinge will manage very well the forces when felling trees with lean opposite to the felling direction even for large trees. Our new recommendation is that the thickness of the felling hinge in normal Swedish conditions should not exceed 30 mm. Through the studies it can also be seen that frozen, brittle wood breaks at small bending angels. For that reason particularly difficult trees not should be felled when the wood is frozen.

Resistance of stored bean varieties to Acanthoscelides obtectus (Coleoptera : Bruchidae)

During bean seed storage, yield can be lost due to infestations of Acanthoscelides obtectus Say, the bean weevil. The use of resistant varieties has shown promising results in fighting these insects, reducing infestation levels and eliminating chemical residues from the beans. The expression of resistance to A. obtectus in bean varieties is frequently attributed to the presence of phytohemagglutinins, protease inhibitors and alpha-amylase, and especially to variants of the protein arcelin, which reduce the larval viability of these insects. To evaluate the effect of bean seed storage time on the resistance expression of bean varieties to A. obtectus, tests with seeds of three ages (freshly-harvested, 4-month-old, and 8-month-old) were conducted in the laboratory, using four commercial varieties: Carioca Pitoco, Ipa 6, Porrillo 70, Onix; four improved varieties containing arcelin protein: Are. 1, Arc.2, Arc. 3, Arc.4; and three wild varieties also containing arcelin protein: Arc. IS, Arc.3S, and Arc. 5S. The Arc.5S, Arc. IS, and Arc.2 varieties expressed high antibiosis levels against the weevil; Arc. I and Arc3S expressed the same mechanism, but at lower levels. The occurrence of oviposition non-preference was also observed in Arc.5S and Arc. IS. The Arc.3 and Arc. 4 varieties expressed low feeding non-preference levels against A. obtectus. The expression of resistance in arcelin-bearing, wild or improved varieties was affected during the storage of seeds, and was high under some parameters but low in others. The results showed that addition of chemical resistance factors such as protein arcelin via genetic breeding may be beneficial in improving the performance of bean crops.

Wear resistance of experimental titanium alloys for dental applications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Identification of Staphylococcus saprophyticus isolated from patients with urinary tract infection using a simple set of biochemical tests correlating with 16S-23S interspace region molecular weight patterns

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Association Between Insulin Resistance, Glucose Intolerance, and Hypertension in Pregnancy

There is an association between insulin resistance, glucose intolerance, and essential hypertension, but the relation between insulin resistance, glucose intolerance, and hypertension diagnosed during pregnancy is not well understood. Transient hypertension of pregnancy, the new-onset nonproteinuric hypertension of late pregnancy, is associated with a high risk of later essential hypertension and glucose intolerance; thus, these conditions may have a similar pathophysiology. To assess the association between insulin resistance, glucose intolerance, essential hypertension, and subsequent development of proteinuric and nonproteinuric hypertension in pregnancy in women without underlying essential hypertension, we performed a prospective study comparing glucose (fasting, I and 2 hours postglucose load), insulin, glycosylated hemoglobin (HbA1c), high-density lipoprotein cholesterol (HDL-C), and triglycerides levels on routine screening for gestational diabetes mellitus. Women who developed hypertension in pregnancy (n = 37) had higher glycemic levels (fasting, 1 and 2 hours postglucose load) on a 100-gram oral glucose loading test, although only the fasting values showed a statistical significance (p < 0.05), and a significantly higher frequency of abnormal glucose loading tests, two hours after glucose load (>= 140 mg/dL) (p < 0.05) than women who remained normotensive (n = 180). Glucose intolerance was common in women who developed both subtypes of hypertension, particularly preeclampsia. Women who developed hypertension had greater prepregnancy body mass index (p < 0.0001), higher frequency and intensity of acanthosis nigricans (p < 0.0001), and higher baseline systolic and diastolic blood pressures (p <= 0.0001 for both), although all subjects were normotensive at baseline by study design; they also presented lower levels of HDL-C (p < 0.05). However, after adjustment for these and other potential confounders, an abnormal glucose loading test remained a significant predictor of development of hypertension (p < 0.05) and, specifically, preeclampsia (p < 0.01). There was a trend toward higher insulin and homeostasis model assessment-insulin resistance (HOMA-IR) levels in women developing any type of hypertension. When comparing women that remained normotensive to term with those with transient hypertension and preeclampsia, the preeclamptic women were born with lower weight (p < 0.05) and shorter length (p < 0.005); at screening they were older (p < 0.005), showed higher frequency and intensity of acanthosis nigricans (p < 0.0001), had higher prepregnancy BMI (p < 0.0005), as well as higher baseline systolic and diastolic blood pressures (p <= 0.0001 for both). They also showed higher HOMA-IR levels that did not show a statistical significance. When glucose tolerance status was taken in account, an association was found between increasing indexes of hypertension (p < 0.05) and of HOMA-IR (p < 0.05) with the worsening of glucose tolerance. These results suggest that insulin resistance and relative glucose intolerance are associated with an increased risk of new-onset hypertension in pregnancy, particularly preeclampsia, and support the hypothesis that insulin resistance may play a role in the pathogenesis of this disorder.

Mechanical resistance of the modified stabilization method for the tibial tuberosity advancement technique: ex vivo experimental study in dogs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Flexibility and Torsional Strength of ProTaper and ProTaper Universal Rotary Instruments Assessed by Mechanical Tests

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Field study on nematode resistance in Nelore-breed cattle

The present study evaluated Nelore cattle with different degrees of resistance to natural infections by gastrointestinal nematodes. One hundred weaned male cattle, 11-12 months of age, were kept on the same pasture and evaluated from October 2003 to February 2004. Faecal and blood samples were collected for parasitological, haematological and immunological tests. In February 2004, the 10 most resistant and the 10 most susceptible animals were selected based on individual means of nematode faecal egg counts (FEC). Such animals were slaughtered for worm burden determination and nematode species identification. The repeatability estimates for FEC (+/- S.D.), log-transformed FEC and packed-cell volume (PCV) in all animals were 0.3 (+/- 0.05), 0.26 (+/- 0.04) and 0.42 (+/- 0.05), respectively. The resistant group showed lower FEC and worm burdens than the susceptible group (P < 0.05). There were no significant differences between groups regarding mean body weight, weight gain, PCV and total serum protein values (P > 0.05). The resistant group showed higher total serum IgE levels (P < 0.05) and higher mean eosinophil blood counts. However, the latter was statistically significant only 42 days after the beginning of the study. Nematodes Cooperia punctata and Haemonchus placei were predominant and the correlation between Cooperia and Haemonchus burdens was 0.64 (P < 0.05), which indicated that animals presenting increased numbers of one of those genera probably had increased numbers of the other. The current study provides further evidence of IgE active role in nematode immunity and suggests that total serum IgE level might serve as an additional marker to select Nelore cattle that are responsive to H. placei and C. punctata infections. (C) 2007 Elsevier B.V. All rights reserved.

Anthelmintic activity of Cymbopogon martinii, Cymbopogon schoenanthus and Mentha piperita essential oils evaluated in four different in vitro tests

Anthelmintic resistance is a worldwide concern in small ruminant industry and new plant-derived compounds are being studied for their potential use against gastrointestinal nematodes. Mentha piperita, Cymbopogon martinii and Cymbopogon schoenanthus essential oils were evaluated against developmental stages of trichostrongylids from sheep naturally infected (95% Haemonchus contortus and 5% Trichostrogylus spp.) through the egg hatch assay (EHA), larval development assay (LDA), larval feeding inhibition assay (LFIA), and the larval exsheathment assay (LEA). The major constituent of the essential oils, quantified by gas chromatography for M. piperita oil was menthol (42.5%), while for C. martinii and C. schoenanthus the main component was geraniol (81.4% and 62.5%, respectively). In all in vitro tests C. schoenanthus essential oil had the best activity against ovine trichostrongylids followed by C. martini, while M. piperita presented the least activity. Cymbopogon schoenanthus essential oil had LC(50) value of 0.045 mg/ml in EHA, 0.063 mg/ml in LDA, 0.009 mg/ml in LFIA, and 24.66 mg/ml in LEA. The anthelmintic activity of essential oils followed the same pattern in all in vitro tests, suggesting C. schoenanthus essential oil could be an interesting candidate for nematode control, although in vivo studies are necessary to validate the anthelmintic properties of this oil. (C) 2011 Elsevier B.V. All rights reserved.

Interspecific variation in the defensive responses of obligate plant-ants: experimental tests and consequences for herbivory

The aggressive behavior of ants that protect plants from herbivores in exchange for rewards such as shelter or food is thought to be an important form of biotic defense against herbivory, particularly in tropical systems. To date, however, no one has compared the defensive responses of different ant taxa associated with the same plant species, and attempted to relate these differences to longer-term efficacy of ant defense. We used experimental cues associated with herbivory-physical damage and extracts of chemical volatiles from leaf tissue-to compare the aggressive responses of two ant species obligately associated with the Amazonian myrmecophyte Tococa bullifera (Melastomataceae). We also conducted a colony removal experiment to quantify the level of resistance from herbivores provided to plants by each ant species. Our experiments demonstrate that some cues eliciting a strong response from one ant species elicited no response by the other. For cues that do elicit responses, the magnitude of these responses can vary interspecifically. These patterns were consistent with the level of resistance provided from herbivores to plants. The colony removal experiment showed that both ant species defend plants from herbivores: however, herbivory was higher on plants colonized by the less aggressive ant species. Our results add to the growing body of literature indicating defensive ant responses are stimulated by cues associated with herbivory. However, they also suggest the local and regional variation in the composition of potential partner taxa could influence the ecology and evolution of defensive mutualisms in ways that have previously remained unexplored.

Prevalence and antifungal resistance profile of Candida spp. oral isolates from patients with type 1 and 2 diabetes mellitus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of HVOF parameters on the corrosion and wear resistance of WC-Co coatings sprayed on AA7050 T7

Thermal spray WC-based coatings are widely used in the aircraft industry mainly for their resistance to wear, reworking and rebuilding operations and repair of worn components on landing gear, hydraulic cylinders, actuators, propeller hub assemblies, gas turbine engines, and so on. The aircraft industry is also trying to use thermal spray technology to replace electroplating coatings such as hard chromium. In the present work, WC-Co coatings were built up on an AA 7050 aluminum alloy using high velocity oxygen fuel (HVOF) technology and a liquid nitrogen cooling prototype system. The influence of the spray parameters (standard conditions, W19S, increasing the oxygen flux, W19H, and also increasing the carrier gas flux, W19F) on corrosion, friction, and abrasive wear resistance were also studied. The coatings were characterized using optical (OM) and scanning electron (SEM) microscopy, and X-ray diffraction (XRD). The friction and abrasive wear resistance of the coatings were studied using Rubber Wheel and Ball on Disk tests. The electrochemical studies were conducted using open-circuit potential (E(oc)) measurements and electrochemical impedance spectroscopy (EIS). Differences among coated samples were mainly related to the variation of the thermal spray parameters used during the spray process. No significant differences were observed in the wear resistance for the coatings studied, and all of them showed a wear rate around 10 times lower than that of the aluminum alloy. The results of mass loss and wear rate were interpreted considering different mechanisms. Comparing the different spray parameters, the oxygen flux (higher flame temperature) produced the sample which showed the highest corrosion resistance in aerated and unstirred 3.5% NaCl solution. Aluminum ions were detected on the surface almost immediately after the immersion of samples W19S and W19F in chloride solution, showing that the electrolyte reached the substrate and galvanic corrosion probably occurred. For sample W19H, aluminum ions were not detected even after 120 min of immersion in NaCl solution. (C) 2008 Elsevier B.V. All rights reserved.