Desenvolvimento de misturas ternárias para remoção de reboco de fluido de perfuração sintético

The construction of wells is one of the most important activities of the oil industry. The drilling process is the set of activities and operations to design, program and perform the opening thereof. During this process, the cuttings are removed by the drilling fluid, or mud, and carted to the surface. This fluid is injected into the drill string and returns to the surface through the annular space between the well walls and the drill string. After the descent of the column casing, the annular space between the casing string and the walls of the borehole is filled with cement so as to secure the spine and prevent any migration of fluids between the various permeable zones traversed by the well behind of the coating. To ensure the good quality of the cementation scrubbers are used mattresses which are pumped ahead of the cement slurry so as to avoid contamination of the drilling fluid paste, or vice versa, and assist in the removal of plaster, formed by drilling fluid of the borehole walls, thus enabling a better cement bond to the well. Within this context, this work aims to evaluate the efficiency of mattresses scrubbers, the basis of ionic and nonionic surfactants, on the removal of nonaqueous drilling fluid, based on n-paraffin in oil wells, and the compatibility between the Mattress relations washer / drilling fluid bed scrubber / cement paste mattress washer / cement slurry / drilling fluid and the drilling fluid / cement slurry using laboratory tests rheology, thickening time and compressive strength. Also technique was performed X-ray diffraction (XRD) for a more detailed analysis of these mixtures with hydrated cement paste. In compatibility tests the conditions of temperature and pressure used in the same laboratory procedure simulating the conditions of oil wells, the well is considered the depth of 800 m. The results showed that the compositions of the mattress washer nonionic, KMS obtained a 100% efficient in removing the non-aqueous drilling fluid, and the best formulation showed good results with respect to compliance testing

Estudo do desempenho de resinas poliméricas para remoção de H2S do gás natural

The natural gas (NG) is a clean energy source and found in the underground of porous rocks, associated or not to oil. Its basic composition includes methane, ethane, propane and other components, like carbon dioxide, nitrogen, hydrogen sulphide and water. H2S is one of the natural pollutants of the natural gas. It is considered critical concerning corrosion. Its presence depends on origin, as well as of the process used in the gas treatment. It can cause problems in the tubing materials and final applications of the NG. The Agência Nacional do Petróleo sets out that the maximum concentration of H2S in the natural gas, originally national or imported, commercialized in Brazil must contain 10 -15 mg/cm3. In the Processing Units of Natural Gas, there are used different methods in the removal of H2S, for instance, adsorption towers filled with activated coal, zeolites and sulfatreat (solid, dry, granular and based on iron oxide). In this work, ion exchange resins were used as adsorbing materials. The resins were characterized by thermo gravimetric analysis, infrared spectroscopy and sweeping electronic microscopy. The adsorption tests were performed in a system linked to a gas-powered chromatograph. The present H2S in the exit of this system was monitored by a photometrical detector of pulsing flame. The electronic microscopy analyzes showed that the topography and morphology of the resins favor the adsorption process. Some characteristics were found such as, macro behavior, particles of variable sizes, spherical geometries, without the visualization of any pores in the surface. The infrared specters presented the main frequencies of vibration associated to the functional group of the amines and polymeric matrixes. When the resins are compared with sulfatreat, under the same experimental conditions, they showed a similar performance in retention times and adsorption capacities, making them competitive ones for the desulphurization process of the natural gas

Estudo do desempenho de resinas poliméricas para remoção de H2S do gás natural

The natural gas (NG) is a clean energy source and found in the underground of porous rocks, associated or not to oil. Its basic composition includes methane, ethane, propane and other components, like carbon dioxide, nitrogen, hydrogen sulphide and water. H2S is one of the natural pollutants of the natural gas. It is considered critical concerning corrosion. Its presence depends on origin, as well as of the process used in the gas treatment. It can cause problems in the tubing materials and final applications of the NG. The Agência Nacional do Petróleo sets out that the maximum concentration of H2S in the natural gas, originally national or imported, commercialized in Brazil must contain 10 -15 mg/cm3. In the Processing Units of Natural Gas, there are used different methods in the removal of H2S, for instance, adsorption towers filled with activated coal, zeolites and sulfatreat (solid, dry, granular and based on iron oxide). In this work, ion exchange resins were used as adsorbing materials. The resins were characterized by thermo gravimetric analysis, infrared spectroscopy and sweeping electronic microscopy. The adsorption tests were performed in a system linked to a gas-powered chromatograph. The present H2S in the exit of this system was monitored by a photometrical detector of pulsing flame. The electronic microscopy analyzes showed that the topography and morphology of the resins favor the adsorption process. Some characteristics were found such as, macro behavior, particles of variable sizes, spherical geometries, without the visualization of any pores in the surface. The infrared specters presented the main frequencies of vibration associated to the functional group of the amines and polymeric matrixes. When the resins are compared with sulfatreat, under the same experimental conditions, they showed a similar performance in retention times and adsorption capacities, making them competitive ones for the desulphurization process of the natural gas

Avaliação da remoção catalítica de compostos orgânicos monoaromáticos em água utilizando materiais nanoestruturados de sílica

Statistics of environmental protection agencies show that the soil has been contaminated with problems often resulting from leaks, spills and accidents during exploration, refining, transportation and storage oil operations and its derivatives. These, gasoline noteworthy, verified by releasing, to get in touch with the groundwater, the compounds BTEX (benzene, toluene, ethylbenzene and xylenes), substances which are central nervous system depressants and causing leukemia. Among the processes used in remediation of soil and groundwater contaminated with organic pollutants, we highlight those that use hydrogen peroxide because they are characterized by the rapid generation of chemical species of high oxidation power, especially the hydroxyl radical ( OH), superoxide (O2 -) and peridroxil (HO2 ), among other reactive species that are capable of transforming or decomposing organic chemicals. The pH has a strong effect on the chemistry of hydrogen peroxide because the formation of different radicals directly depends on the pH of the medium. In this work, the materials MCM-41 and Co-MCM-41 were synthesized and used in the reaction of BTEX removal in aqueous media using H2O2. These materials were synthesized by the hydrothermal method and the techniques used to characterize were: XRD, TG/DTG, adsorption/desorption N2, TEM and X-Ray Fluorescence. The catalytic tests were for 5 h of reaction were carried out in reactors of 20 mL, which was accompanied by the decomposition of hydrogen peroxide by molecular absorption spectrophotometry in the UV-Vis, in addition to removal of organic compounds BTEX was performed as gas chromatography with detection photoionization and flame ionization and by static headspace sampler. The characterizations proved that the materials were successfully synthesized. The catalytic tests showed satisfactory results, and the reactions containing BTEX + Co-MCM-41 + H2O2 at pH = 12.0 had the highest percentages of removal for the compounds studied

Parâmetros urbanísticos para habitação de interesse social: uma análise crítica para as Rocas em Natal/RN

Through the comparative critical analysis of the demanded urbanistic parameters in the legislation and of the urbanistic index found in the Rocas neighbourhood, having as study object the already consolidated constructions of residential use, intended to demonstrate that the neighbourhood needes specific norms and that the limits established for recognition of Special Areas of Social Interest for the urbanistic legislation of the City of Natal would have to be reviewed and to be brought up to date, once they show occupations like the ones of the reffered neighbourhood. At a first moment, bibliographical revision and elaboration of the theoretical referencial had been made, , to analyze afterwards the urbanistic legislation for the neibourhood of Rocas, that determines relative parameters for the sizes of land lots, coefficients of exploitation, minimum taxes of occupation and retreat. Through a field research in the area, a study on the occupation description was done at first, characterization of the neibourhood through the study of the social-economic aspects, of the existing infrastructure in the place, environmental aspects, morphologic and tipolgic analysis of the neibourhood as a whole. From the grouping of the found characteristics, sub-zones had been delimited, where the real object of study was detached to be analyzed. From the Sub-zoning, a statistic sampling was carried through with the intention to examine which of the urbanistic index is found in the dwellings of that already materialized place. This sampling, of one hundred and eighteen residences, was carried through by measurement of the lots and existing constructions in these places. Through this survey, for each habitacional unit, area of the lot, constructed area, retreats and coefficient of exploitation had been calculated. The comparison between the legislation parameters and the index found in the place reveal an expressive index of urbanistic irregularity and the necessity of special regulation for the Rocas neibourhood due to its specific social-space characteristic

Remoção temporária de bezerros em dois momentos do protocolo de sincronização da ovulação GnRH-PGF2α-BE em vacas Nelore pós-parto

Os efeitos da remoção temporária de bezerros (RB) sobre características foliculares e taxas de ovulação e de prenhez de vacas Nelore foram avaliados em dois experimentos quando da inseminação artificial em tempo fixo (IATF), utilizando-se um protocolo à base de GnRH-PGF2α-BE. No experimento 1, 139 vacas Nelore, lactantes, cíclicas ou acíclicas, receberam um protocolo hormonal envolvendo a aplicação de 100±g de análogo GnRH no dia zero (D0-GnRH), 25mg de PGF2α no dia 7 (D7-PGF2α) e 1,0mg de benzoato de estradiol no dia 8 (D8-BE). Os animais foram aleatoriamente distribuídos para serem submetidas ou não à RB (48 horas) antes da aplicação de GnRH (RB1) ou após a aplicação de PGF2α (RB2). Avaliaram-se o diâmetro folicular (DF) nos dias 0 (D0) e 9 (D9) do protocolo e as taxas de ovulação (T0), advindas dos tratamentos. As vacas acíclicas que receberam RB1 apresentaram maiores DF no D0 (P<0,05) e taxa de ovulação (P<0,05) quando da aplicação de GnRH, em relação às que não receberam RB1. Nas vacas cíclicas, não houve efeito da RB1 sobre as variáveis analisadas. As vacas que receberam RB2 apresentaram maiores DF no D9 (P<0,05) e taxa de ovulação (P<0,01) quando da aplicação de BE, em relação às que não receberam a RB2. No experimento 2, 376 vacas da raça Nelore, lactantes, foram submetidas ao mesmo protocolo hormonal e aos mesmos tratamentos do experimento 1, mas foram inseminadas 24 a 30 horas após a aplicação de BE no D8, visando avaliar a taxa de prenhez após a IATF. A taxa de prenhez foi maior nos animais que receberam as duas RB em relação às que não receberam RB (29,8% vs 10,6%; P<0,05). A remoção de bezerros associada ao protocolo hormonal aplicado pode ter aumentado as taxas de prenhez devido às maiores taxas de ovulação, em resposta ao GnRH ou ao benzoato de estradiol.

Taxa de prenhez de vacas Nelore lactantes tratadas com progesterona associada à remoção temporária de bezerros ou aplicação de gonadotrofina coriônica eqüina

Avaliaram-se os efeitos da remoção temporária de bezerros (RTB) ou da aplicação de gonadotrofina coriônica eqüina (eCG) na taxa de prenhez (TP) de vacas Nelore lactantes tratadas com um dispositivo intravaginal liberador de progesterona (DILP). No experimento 1, 83 vacas Nelore e 102 mestiças (Nelore × Red Angus) foram distribuídas em três grupos. em dia aleatório do ciclo estral (D0), os animais do grupo 1 foram tratados com benzoato de estradiol (BE; 2,5 mg, IM, Estrogin®) e um DILP (1 g de progesterona, DIB®), removido no D9, quando também se administrou d-cloprostenol (150 µg, IM, Prolise®) e aproximadamente 12 horas após identificação do estro realizou-se a inseminação artificial. No grupo 2 (IATF), o tratamento foi semelhante ao aplicado no grupo 1, porém, administrou-se uma segunda dose de benzoato de estradiol (1 mg) no D10 e 30-36 horas mais tarde realizou-se a inseminação artificial em tempo fixo (IATF). No grupo 3 (IATF/RTB), os bezerros foram removidos a partir do D9 até a inseminação artificial com tempo fixo (IATF). As taxas de prenhez para as vacas Nelore e mestiças foram, respectivamente, de 7,69 e 41% (Controle); 23,52 e 59,57% (IATF); 69,44 e 55,81% (IATF/RTB). No experimento 2, 255 vacas Nelore lactantes foram distribuídas em três grupos. Os animais do grupo 4 (IATF) foram tratados com benzoato de estradiol (2 mg) e um DILP (1,9 g de progesterona, CIDR-B®) no D0 e no D8 sofreram remoção do DILP no D8 e administração de 25 mg de dinoprost (IM, Lutalyse®). No D9, foi aplicado benzoato de estradiol (1 mg) realizando-se a IATF 30-36 horas mais tarde. No grupo 5 (IATF/RTB), os bezerros foram removidos no D9 até a IATF. O grupo 6 (eCG) foi semelhante ao IATF, exceto pela aplicação de eCG no D9 (400 UI, IM, Novormon®). As taxas de prenhez foram de 50,57 (IATF), 53,57 (IATF/RTB) e 54,76% (eCG). A associação de RTB ao tratamento hormonal com DILP aumenta as taxas de prenhez, enquanto a adição de eCG ao tratamento não melhora as taxa de prenhez de vacas Nelore lactantes ciclando e em boa condição corporal.

Processos diurnos e noturnos de remoção de NO2 e NH3 atmosféricos na região de Araraquara-SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reatores anaeróbios operados em batelada sequencial, seguidos de lagoas de polimento, para o tratamento de águas residuárias de suinocultura. Parte I: produção de metano e remoção de DQO e de sólidos suspensos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reatores anaeróbios operados em batelada sequencial seguidos de lagoas de polimento para o tratamento de águas residuárias de suinocultura. Parte II: remoção de nutrientes e coliformes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Métodos de remoção da mucilagem e qualidade fisiológica de sementes de tomate (Lycopersicon esculentum, Mill.)

Objetivando estudar diferentes métodos de remoção da mucilagem e a qualidade de sementes de tomate (Lycopersicon esculentum Mill.), conduziu-se um experimento, em delineamento inteiramente casualizado com quatro repetições. Após extração manual, sementes e mucilagens foram submetidas aos seguintes tratamentos de remoção: lavagem imediata, fermentação por três dias, ácido clorídrico a 2,5% (25 ml/kg, durante 2 horas), ácido acético a 10% (25 ml/kg de material) e hidróxido de amônia a 2,5% (25 ml/kg, durante 2 horas). Seguiu-se a avaliação da qualidade fisiológica das sementes através das determinações de porcentagem de germinação e vigor, pela porcentagem de emergência em areia, condutividade elétrica e pesos das matérias verde e seca de plântulas. Os resultados permitiram concluir que os métodos de remoção por lavagem imediata, fermentação, ácido clorídrico e ácido acético comercial não afetaram a qualidade fisiológica de sementes de tomate; a porcentagem de germinação não foi afetada pelos diferentes métodos de remoção e o método hidróxido de amônia prejudica o vigor das sementes.

Remoção de substâncias húmicas por meio da oxidação com ozônio e peróxido de hidrogênio e FiME

A filtração em múltiplas etapas (FiME) se apresenta como uma alternativa para realizar o tratamento de água de comunidades de pequeno porte, entretanto, a eficiência quanto à remoção de cor verdadeira associada ao carbono orgânico dissolvido (COD) ou às substâncias húmicas, tem sido questionada ou relatada como baixa. A presente pesquisa avaliou a remoção de substâncias húmicas na FiME com pré-oxidação, com ozônio e peróxido de hidrogênio, utilizando para essa avaliação parâmetros indiretos como cor verdadeira, absorvância UV (254 nm) e COD. Foram realizados cinco ensaios, utilizando quatro filtros lentos, sendo dois com camada de carvão ativado granular (CAG). Foram ensaiadas várias alternativas de pré-oxidação com ozônio e peróxido de hidrogênio. Foram obtidos bons resultados, tendo como principal conclusão que os filtros lentos com CAG, precedidos de oxidação com ozônio e depois peróxido de hidrogênio, apresentaram remoção média de cor verdadeira de 64%, mas que o peróxido de hidrogênio afeta o desenvolvimento da camada biológica, interferindo no desenvolvimento da perda de carga, na remoção de turbidez, na remoção de coliformes e na remoção de substâncias húmicas.

Cinética da remoção dos extrativos da madeira de Eucalyptus grandis durante polpação Kraft

Kinetics of the removal of Eucalyptus grandis wood extractives during Kraft pulping. The objective of this work was to study the kinetics of the removal of Eucalyptus grandis wood extractives during Kraft pulping. The pulping was done in steel tubular reactors using wood saw under the following conditions: active alkali = 14%, sulfidity = 25%; liquor-to-wood ratio = 10 L kg(-1) of dry wood; and temperatures of 130, 150, 160 and 180 C during 30, 60, 90, 120, 150 and 180 minutes. After pulping, analyses were conducted of the yield and extractives in residue (pulp and reject). Total extractives (ethyl alcohol-toluene (1:2), ethyl alcohol and hot water, respectively) and soluble extractives in acetone were analyzed. The results showed that most extractives are degraded in the first 30 minutes of the pulping process. It was observed that the removal occurs in two different stages: the first is rapid, where the majority of the extractives are removed, and the last is slow, where few extractives are removed.

Emprego do reagente de fenton como agente coagulante na remoção de substâncias húmicas de água por meio da flotação por ar dissolvido e filtração

Fenton 's reagent was used as coagulant agent to treat water with high true color (100 ± 5 HU) caused by the introduction of humic substances extracted from peat, using dissolved air flotation. The pair value of coagulant dosage x coagulation pH was optimized to posterior construction of coagulation diagrams, reaching apparent color removal efficiency slightly superior to 60%. It was tried to simulate a treatment with complete cycle, carrying out an experiment with sand filtration after flotation, obtaining an effluent with excellent quality, presenting remnant apparent color, turbidity and absorbance of 253.7 nm less or equal to 2 HU, 0.40 TU and 0.009 cm -1, respectively, and residual total iron < 0.005 mg/L and DOC < 0.001 mg/L.