Tensoativo derivado do ácido cítrico: síntese e aplicação em fluidos de perfuração de emulsão inversa

This work describes the synthesis and study of the application of a new surfactant (Triester Lipophilic – TEL) obtained by citric acid with octanol. It is reaction was followed by thin layer chromatography (TLC) and after purification the product was characterized by proton and 13 – carbon nuclear magnetic resonance spectroscopy ( H and 13C NMR), thermogravimetric analysis (TGA) and surface tension analysis of oil-in-water emulsions. The TEL performance as surfactant in ester, n-paraffin and biodiesel based drilling fluids on the 70/30 and 60/40 water- oil rations (WOR) was evaluated by comparative tests of two commercial products used in the fields. These drilling fluids were aged in roller oven at 200 0 F during 16 h. The rheological and electric stability measurements were carried out at 135 ºF, the phase separation was evaluated after seven days at rest and the filtrate volume of drilling fluids was determined at high temperature and high pressure. The rheological behavior of the drilling fluids was evaluated by the flow curves. The results showed that the drilling fluids studied here presented Binghamian behavior as well as the used in the oil fields. The laboratory tests showed that the TEL reduced the filtrate volume and promoted the enhance of the thermal and mechanical stabilities.

Degradação de paracetamol empregando tecnologia oxidativa avançada baseada em fotocatálise heterogênea usando irradiação artificial e solar

In this work, the oxidation and mineralization of paracetamol, based in an advanced oxidative process promoted by heterogeneous photocatalysis, was evaluated. The action of two photocatalysts (titanium dioxide, and a composite based on the association between titanium dioxide and zinc phthalocyanine dye) was studied. First of all, experiments in laboratory scale were performed using as radiation font a 400 W high pressure mercury lamp. The mineralization of paracetamol, promoted by both photocatalysts, was evaluated working with 4L of solution containing 10 mg L-1 of paracetamol and 100 mg L-1 of photocatalyst. To find the best experimental conditions, the influence of hydrogen peroxide concentration and pH was evaluated for the reactions. The best results for the reactions in laboratory scale was obtained using 33,00 mg L-1 of hydrogen peroxide in natural pH (6,80). Under these conditions, 100% oxidation was reached in just 40 minutes of reaction using TiO2 P25, while the mineralization was 78%. Using the composite, the mineralization was 63% in 2 hours of reaction and a oxidation of almost 100% was reached after 60 minutes. A CPC reactor (compound parabolic concentrator) was employed in the expanded work scale, using the sun as irradiation source. In this case the experiments were performed using 50 L of aqueous solution containing 10 mg L-1 of paracetamol and 100 mg L-1 of photocatalyst. The assays were done at pH 3,00 and natural pH (6,80). The used concentration of hydrogen peroxide was 33,00 mg L-1, adopted after laboratory scale studies. The reaction at pH 3,00 shows to be more advantageous, since under natural pH (6,80), the use of deionized water was necessary to prepare the solutions, probably because the deleterious action of carbonate ions, known hydroxyl radical scavengers. Using solar irradiation, the reaction mediated by the composite was more efficient when compared with the assays under laboratory scale since the composite presents the advantage of promoting a better use of visible radiation. Under these conditions, the mineralization increased from 40% to 56% under pH 3,00. At natural pH the oxidation occurred more slowly and the mineralization decreased from 56% to 50%. Thus, the use of pH 3,00 will be more interesting in real scale applications, even if it is necessary the pH correction before the discard of the treated effluent to the environment.

Biologia reprodutiva, crescimento corporal e parâmetros demográficos de Cavia magna em uma ilha estuarina do extremo sul do Brasil

A teoria da história de vida tem como objetivo compreender os fatores que produzem variações na taxa de sobrevivência, tamanho no nascimento, idade de maturação, sazonalidade na reprodução, longevidade, razão sexual da prole. O gênero Cavia pallas 1776 apresenta a maior distribuição dentro da subfamília Cavinae, sendo composto por seis espécies, dentre elas Cavia magna, a qual habita regiões de restinga próximas a estuários ou lagos do norte do Uruguai ao sul do Brasil. Durante esse trabalho avaliamos os padrões da história de vida de uma população de Cavia magna da Ilha dos Marinheiros, RS, Brasil, devido ao fato de se tratar de uma espécie com baixa taxa reprodutiva, distribuição geográfica restrita, e estar exposta a alta pressão de predação. Para isso foi realizado um programa de captura-marcação-recaptura, durante 13 meses no qual foram capturados 129 animais, sendo 63 fêmeas e 66 machos. As longevidades máximas registradas, foram 233 dias para uma fêmea e 321 dias para um macho. Foram encontradas 13 fêmeas grávidas ou lactantes, dentre elas 9 estavam grávidas, sendo que 6 estavam prenhas de 2 filhotes e 3 estavam prenhas de 1 filhote apenas. Vários parâmetros foram testados, para estimar a taxa de sobrevivência e captura ,utilizamos o programa Mark, o método jacknife um modelo probabilístico, que permite heterogeneidade individual nas taxas de captura também foi utilizado. Não houve diferenças significativas no número de machos e fêmeas, a razão sexual foi 1:1. Em relação a estrutura etária, a população foi composta por adultos (82%) e a densidade populacional foi de 30 animais por hectare.

Moringa oleifera plasticity to face climatic changes

Extreme abiotic factors, such drought combined with heat waves and/or high UVB radiation are predicted to become more frequent in the future. The impact on plant production of these challenges on multipurpose Moringa oleifera L. remains unclear. A susceptibility of this species may lead to increase poverty in endangered regions. M. oleifera is a woody species native from sub-Himalaya regions under high climate stress pressure. The interest on this species is emerging due to its several medicinal properties and its nutritional value. Agropharmaceutical industry is interest in this species too. To understand the impact of increased climate factors, young (2 months old) plants of this species were exposed to water deficit (WD) and UVB (alone or combined). WD and WD+UVB imposition consists of unwater for 4 days. After 1 day withholding water, UVB and WD+UVB were irradiated with 26.3 kJ m-2 distributed per 3 days. Immediately after treatment exposition (1 day) and after 10 days, plant water status, growth, carbon metabolism and oxidative stress were measured. Overall no significant differences were observed in WD, regarding the parameters analysed, except on gas exchanges, MDA and phenols. The plants exposed to UVB showed, in general, more severe effects, as higher pigment content, MDA and membrane permeability, while no changes were observed in the total antioxidant activity. Plants exposed to UVB+WD, despite changes observed, the impact was lower than the one observed in UVB exposed plants, meaning that a protective/adaptive mechanism was developed in the plants under combined stressors. On the other hand, in all treatments the net CO2 assimilation rate decreased. Results suggest that M. oleifera has some tolerance to WD and UVB, and that develops mechanism of adaptation to these two types of stress that often arise in combination under a climate change scenario.

Desenvolvimento de metodologias alternativas para quantificação de micronutrientes em produtos de nutrição infantil

As farinhas infantis, alimentos que se destinam a recém-nascidos e crianças até à idade pré-escolar, devem satisfazer todas as necessidades nutricionais que se verificam durante o período de crescimento e desenvolvimentos físico e mental desta faixa etária. Desta forma, são frequentemente adicionadas prémisturas de vitaminas e minerais durante a sua produção (fortificação), de maneira a que a quantidade adicionada e a composição do produto final sejam concordantes com a legislação comunitária em vigor. A implementação, na linha de produção, de métodos alternativos de análise “amigos do ambiente” e passíveis de obter resultados rápidos acerca da composição nutricional dos produtos alimentares, mesmo antes destes serem embalados, permite reduções de tempo, custos e um melhor controlo do processo de produção. A espectroscopia FT-NIR e a espectroscopia de XRF são técnicas que permitem a quantificação de micronutrientes e possuem características fundamentais ao controlo rápido de processos. Neste trabalho foram desenvolvidos modelos de calibração para quantificação de zinco, por espectroscopia de XRF, em três receitas de pré-misturas de vitaminas e minerais. Construíram-se dois modelos de calibração, um com um R2 de 0,990 e um SEC de 26,624 mg/100g e outro com um R2 de 0,927 e um SEC de 18,838 mg/100g. Estes resultados indicam que os modelos de calibração construídos são adequados e podem ser usados na determinação rápida do teor de zinco em pré-misturas de vitaminas e minerais. Foram também verificadas as rectas de calibração existentes para quantificação de cálcio e ferro por espectroscopia de XRF e quantificação de vitamina C por espectroscopia FT-NIR para aplicação nas novas receitas de pré-misturas de vitaminas e minerais.

Valorisation of fish-cannery by-products targeting the recovery of ω3 lipids

Over the past years, ω3 fatty acids, namely EPA and DHA, have been recognized as presenting multiple health benefits. Several studies consider fish oil as the most important source of EPA and DHA. Nowadays, canned fish industry plays a very important role in Portuguese economy. However, expansion of this business brought some environmental concerns due to the high amount of by-products generated. Nevertheless, this problem can be substantially reduced by the recovery of some of the by-product components, diminishing its contamination load and simultaneously obtaining value-added products. This study was born from the growing interest in obtaining new sources of lipids rich in ω3 fatty acids, combined with environmental concerns related to the production of wastes from the fish canning industries, rich in these compounds. It thus intends to evaluate lipid extraction methods in liquid by-products from the fish canning industry, aiming to obtain fractions rich in ω3 fatty acids. Additionally, in a biorefining concept, the protein content of the remaining aqueous fractions was also quantified.

Manual de segurança alimentar

A Sociedade é cada vez mais exigente, e para satisfazer o consumidor quer em qualidade quer em segurança alimentar, a legislação em vigor deve ser cumprida com rigor, de forma a garantir que os produtos da origem até ao consumo sejam alimentos seguros. O presente trabalho aborda a importância da segurança alimentar, desde a origem ao consumo, com destaque nas exigências sanitárias contidas no Regulamento (CE) 852/2004, em vigor desde 1 de janeiro de 2006, tendo sempre em conta as boas práticas de higiene dos manipuladores intervenientes, das instalações, equipamentos, receção das matérias-primas, armazenagem das mesmas e respetivo processamento dos alimentos. Aborda-se ainda a Norma ISO 22000, que especifica os requisitos para um sistema de gestão da segurança alimentar e que combina os elementos-chave geralmente reconhecidos como essenciais, que permitem assegurar a segurança dos géneros alimentícios ao longo da cadeia alimentar até ao seu consumo final. Para além destes temas são abordados ainda dois exemplos práticos relativos à implementação da segurança alimentar desde a origem da matéria-prima, até ao consumo de alimentos em dois setores. O primeiro é o de uma empresa do setor de distribuição, enquadrando-se nesta o fornecedor de origem, onde se realizam as etapas de abate, desmancha e embalamento, e o segundo é do setor da restauração.

Efeito da administração da hormona PGF2α nos problemas pós-parto, mais concretamente na retenção placentária em bovinos leiteiros

Dissertação de Mestrado em Engenharia Zootécnica/Produção Animal

Fotodegradação de pesticidas: caso do fenarimol

Tese dout. em Química, Unidade de Ciências Exactas e Humanas, Univ. do Algarve, 1997

Estudo da influência da temperatura de produtos de charcutaria no processo de fatiagem. Estágio curricular na empresa Nobre Alimentação, S.A.

Mestrado em Engenharia Alimentar - Processamento de Alimentos - Instituto Superior de Agronomia - UL

Estudo do comportamento de pastas compósitas cimento/sílica/poliuretana para poços de petróleo HPHT

Os poços HPHT atravessam zonas anormalmente pressurizadas e com altos gradientes de temperatura. Esses poços apresentam elevadas concentrações de tensões produzidas pelas operações de perfuração e fraturamento hidráulico, flutuações da pressão e temperatura, forças dinâmicas geradas durante a perfuração, formações inconsolidadas, entre outros aspectos, podendo resultar em falhas mecânicas na bainha de cimento. Tais falhas comprometem a estabilidade mecânica do poço e o isolamento das zonas produtoras de óleos e/ou gás. Para que operações corretivas não se façam necessárias, é preciso adequar as pastas às condições de cada poço. Sistemas de pastas de cimento para poços HPHT requerem um bom controle de suas propriedades termo-mecânicas. Visto que a temperaturas superiores a 110 oC (230 oF) o cimento, após alcançar um valor máximo de resistência, inicia um processo de perda de resistência (retrogressão). Para prevenir esse efeito substitui-se parcialmente o cimento Portland por sílica com objetivo de incrementar a reação pozolânica. Esta reação modifica a trajetória do processo natural de hidratação do cimento, o gel de silicato de cálcio hidratado (C-S-H) se converte em várias outras fases com maior resistência. Polímeros também são adicionados para proporcionar maior flexibilidade e agir como barreira à propagação de trincas desenvolvidas sob tensão. O presente trabalho teve como objetivo estudar o comportamento do sistema cimento/sílica/polímero quando submetido às condições de alta temperatura e alta pressão. Foram formuladas pastas de cimento puro, pastas contendo 40 % BWOC de sílica flour e pastas com diferentes concentrações de poliuretana (5 % a 25 %) e 40 % BWOC de sílica flour. O peso específico das pastas foi fixado em 1,87 g/cm3 (15,6 lb/gal). Os resultados demonstram que as resistências da pasta contendo 40% de sílica e das com adição de polímero foram muito superiores a da pasta de cimento puro, não ocorrendo o efeito da retrogressão. As pastas com polímero apresentaram um crescente aumento da tenacidade com o aumento da concentração da mesma, sendo assim capaz de suportar as tensões. Além de se manterem estáveis termicamente acima de 180 ºC. O sistema também apresentou excelentes resultados de filtrado, reologia, água livre, estabilidade e permeabilidade. Sendo assim, o mesmo mostrou ser aplicável a poços HPHT

Estudo do processo de combustão in-situ em reservatórios maduros de óleos médios e leves (high pressure air injection)

Nearly 3 x 1011 m3 of medium and light oils will remain in reservoirs worldwide after conventional recovery methods have been exhausted and much of this volume would be recovered by Enhanced Oil Recovery (EOR) methods. The in-situ combustion (ISC) is an EOR method in which an oxygen-containing gas is injected into a reservoir where it reacts with the crude oil to create a high-temperature combustion front that is propagated through the reservoir. The High Pressure Air Injection (HPAI) method is a particular denomination of the air injection process applied in light oil reservoirs, for which the combustion reactions are dominant between 150 and 300°C and the generation of flue gas is the main factor to the oil displacement. A simulation model of a homogeneous reservoir was built to study, which was initially undergone to primary production, for 3 years, next by a waterflooding process for 21 more years. At this point, with the mature condition established into the reservoir, three variations of this model were selected, according to the recovery factors (RF) reached, for study the in-situ combustion (HPAI) technique. Next to this, a sensitivity analysis on the RF of characteristic operational parameters of the method was carried out: air injection rate per well, oxygen concentration into the injected gas, patterns of air injection and wells perforations configuration. This analysis, for 10 more years of production time, was performed with assistance of the central composite design. The reservoir behavior and the impacts of chemical reactions parameters and of reservoir particularities on the RF were also evaluated. An economic analysis and a study to maximize the RF of the process were also carried out. The simulation runs were performed in the simulator of thermal processes in reservoirs STARS (Steam, Thermal, and Advanced Processes Reservoir Simulator) from CMG (Computer Modelling Group). The results showed the incremental RF were small and the net present value (NPV) is affected by high initial investments to compress the air. It was noticed that the adoption of high oxygen concentration into the injected gas and of the five spot pattern tends to improve the RF, and the wells perforations configuration has more influence with the increase of the oil thickness. Simulated cases relating to the reservoir particularities showed that smaller residual oil saturations to gas lead to greater RF and the presence of heterogeneities results in important variations on the RF and on the production curves

Nova técnica para obtenção de fraturas com altíssima condutividade em poços de petróleo

Increase hydrocarbons production is the main goal of the oilwell industry worldwide. Hydraulic fracturing is often applied to achieve this goal due to a combination of attractive aspects including easiness and low operational costs associated with fast and highly economical response. Conventional fracturing usually involves high-flowing high-pressure pumping of a viscous fluid responsible for opening the fracture in the hydrocarbon producing rock. The thickness of the fracture should be enough to assure the penetration of the particles of a solid proppant into the rock. The proppant is driven into the target formation by a carrier fluid. After pumping, all fluids are filtered through the faces of the fracture and penetrate the rock. The proppant remains in the fracture holding it open and assuring high hydraulic conductivity. The present study proposes a different approach for hydraulic fracturing. Fractures with infinity conductivity are formed and used to further improve the production of highly permeable formations as well as to produce long fractures in naturally fractured formations. Naturally open fractures with infinite conductivity are usually encountered. They can be observed in rock outcrops and core plugs, or noticed by the total loss of circulation during drilling (even with low density fluids), image profiles, pumping tests (Mini-Frac and Mini Fall Off), and injection tests below fracturing pressure, whose flow is higher than expected for radial Darcian ones. Naturally occurring fractures are kept open by randomly shaped and placed supporting points, able to hold the faces of the fracture separate even under typical closing pressures. The approach presented herein generates infinite conductivity canal held open by artificially created parallel supporting areas positioned both horizontally and vertically. The size of these areas is designed to hold the permeable zones open supported by the impermeable areas. The England & Green equation was used to theoretically prove that the fracture can be held open by such artificially created set of horizontal parallel supporting areas. To assess the benefits of fractures characterized by infinite conductivity, an overall comparison with finite conductivity fractures was carried out using a series of parameters including fracture pressure loss and dimensionless conductivity as a function of flow production, FOI folds of increase, flow production and cumulative production as a function of time, and finally plots of net present value and productivity index