A method for enhancing digital information displayed to computer users with visual refractive errors via spatial and spectral processing

This research pursued the conceptualization, implementation, and verification of a system that enhances digital information displayed on an LCD panel to users with visual refractive errors. The target user groups for this system are individuals who have moderate to severe visual aberrations for which conventional means of compensation, such as glasses or contact lenses, does not improve their vision. This research is based on a priori knowledge of the user's visual aberration, as measured by a wavefront analyzer. With this information it is possible to generate images that, when displayed to this user, will counteract his/her visual aberration. The method described in this dissertation advances the development of techniques for providing such compensation by integrating spatial information in the image as a means to eliminate some of the shortcomings inherent in using display devices such as monitors or LCD panels. Additionally, physiological considerations are discussed and integrated into the method for providing said compensation. In order to provide a realistic sense of the performance of the methods described, they were tested by mathematical simulation in software, as well as by using a single-lens high resolution CCD camera that models an aberrated eye, and finally with human subjects having various forms of visual aberrations. Experiments were conducted on these systems and the data collected from these experiments was evaluated using statistical analysis. The experimental results revealed that the pre-compensation method resulted in a statistically significant improvement in vision for all of the systems. Although significant, the improvement was not as large as expected for the human subject tests. Further analysis suggest that even under the controlled conditions employed for testing with human subjects, the characterization of the eye may be changing. This would require real-time monitoring of relevant variables (e.g. pupil diameter) and continuous adjustment in the pre-compensation process to yield maximum viewing enhancement.

Investigation on performance characteristics of dense graded hot mix asphalt with RAP and crumb rubber

The objective of this study was to fundamentally characterize the laboratory performance of traditional hot mix asphalt (HMA) mixtures incorporating high RAP content and waste tire crumb rubber through their fundamental engineering properties. The nominal maximum aggregates size was chosen for this research was 12mm (considering the limitation of aggregate size for surface layer) and both coarse and fine aggregates are commonly used in Italy that were examined and analyzed in this study. On the other hand, the RAP plays an important role in reducing production costs and enhancing the environmentally sustainable pavements instead of using virgin materials in HMA. Particularly, this study has aimed to use 30% of RAP content (25% fine aggregate RAP and 5% coarse aggregate RAP) and 1% of CR additives by the total weight of aggregates for mix design. The mixture of aggregates, RAP and CR were blended with different amount of unmodified binder through dry processes. Generally, the main purposes of this study were investigating on capability of using RAP and CR in dense graded HMA and comparing the performance of rejuvenator in RAP with CR. In addition, based on the engineering analyses during the study, we were able compare the fundamental Indirect Tensile Strength (ITS) value of dense graded HMA and also mechanical characteristics in terms of Indirect Tensile Stiffness Modulus (ITSM). In order to get an extended comparable data, four groups of different mixtures such as conventional mixture with only virgin aggregates (DV), mixture with RAP (DR), mixture with RAP and rejuvenator (DRR), and mixture with RAP, rejuvenator, CR (DRRCr) were investigated in this research experimentally. Finally, the results of those tests indicated that the mixtures with RAP and CR had the high stiffness and less thermal sensitivity, while the mixture with virgin aggregates only had very low values in comparison.

Spontaneity and international marketing performance

Purpose: The purpose of this paper is to ascertain how today’s international marketers can perform better on the global scene by harnessing spontaneity. Design/methodology/approach: The authors draw on contingency theory to develop a model of the spontaneity – international marketing performance relationship, and identify three potential moderators, namely, strategic planning, centralization, and market dynamism. The authors test the model via structural equation modeling with survey data from 197 UK exporters. Findings: The results indicate that spontaneity is beneficial to exporters in terms of enhancing profit performance. In addition, greater centralization and strategic planning strengthen the positive effects of spontaneity. However, market dynamism mitigates the positive effect of spontaneity on export performance (when customer needs are volatile, spontaneous decisions do not function as well in terms of ensuring success). Practical implications: Learning to be spontaneous when making export decisions appears to result in favorable outcomes for the export function. To harness spontaneity, export managers should look to develop company heuristics (increase centralization and strategic planning). Finally, if operating in dynamic export market environments, the role of spontaneity is weaker, so more conventional decision-making approaches should be adopted. Originality/value: The international marketing environment typically requires decisions to be flexible and fast. In this context, spontaneity could enable accelerated and responsive decision-making, allowing international marketers to realize superior performance. Yet, there is a lack of research on decision-making spontaneity and its potential for international marketing performance enhancement.

Enhancing the Visualization of the Peripheral Retina with Wide Field-of-View Optical Coherence Tomography

The goal of my Ph.D. thesis is to enhance the visualization of the peripheral retina using wide-field optical coherence tomography (OCT) in a clinical setting.

OCT has gain widespread adoption in clinical ophthalmology due to its ability to visualize the diseases of the macula and central retina in three-dimensions, however, clinical OCT has a limited field-of-view of 300. There has been increasing interest to obtain high-resolution images outside of this narrow field-of-view, because three-dimensional imaging of the peripheral retina may prove to be important in the early detection of neurodegenerative diseases, such as Alzheimer's and dementia, and the monitoring of known ocular diseases, such as diabetic retinopathy, retinal vein occlusions, and choroid masses.

Before attempting to build a wide-field OCT system, we need to better understand the peripheral optics of the human eye. Shack-Hartmann wavefront sensors are commonly used tools for measuring the optical imperfections of the eye, but their acquisition speed is limited by their underlying camera hardware. The first aim of my thesis research is to create a fast method of ocular wavefront sensing such that we can measure the wavefront aberrations at numerous points across a wide visual field. In order to address aim one, we will develop a sparse Zernike reconstruction technique (SPARZER) that will enable Shack-Hartmann wavefront sensors to use as little as 1/10th of the data that would normally be required for an accurate wavefront reading. If less data needs to be acquired, then we can increase the speed at which wavefronts can be recorded.

For my second aim, we will create a sophisticated optical model that reproduces the measured aberrations of the human eye. If we know how the average eye's optics distort light, then we can engineer ophthalmic imaging systems that preemptively cancel inherent ocular aberrations. This invention will help the retinal imaging community to design systems that are capable of acquiring high resolution images across a wide visual field. The proposed model eye is also of interest to the field of vision science as it aids in the study of how anatomy affects visual performance in the peripheral retina.

Using the optical model from aim two, we will design and reduce to practice a clinical OCT system that is capable of imaging a large (800) field-of-view with enhanced visualization of the peripheral retina. A key aspect of this third and final aim is to make the imaging system compatible with standard clinical practices. To this end, we will incorporate sensorless adaptive optics in order to correct the inter- and intra- patient variability in ophthalmic aberrations. Sensorless adaptive optics will improve both the brightness (signal) and clarity (resolution) of features in the peripheral retina without affecting the size of the imaging system.

The proposed work should not only be a noteworthy contribution to the ophthalmic and engineering communities, but it should strengthen our existing collaborations with the Duke Eye Center by advancing their capability to diagnose pathologies of the peripheral retinal.

Engineering metallic nanoparticles for enhancing and probing catalytic reactions

Recent developments in tailoring the structural and chemical properties of colloidal metal nanoparticles (NPs) have led to significant enhancements in catalyst performance. Controllable colloidal synthesis has also allowed tailor-made NPs to serve as mechanistic probes for catalytic processes. The innovative use of colloidal NPs to gain fundamental insights into catalytic function will be highlighted across a variety of catalytic and electrocatalytic applications. The engineering of future heterogenous catalysts is also moving beyond size, shape and composition considerations. Advancements in understanding structure-property relationships have enabled incorporation of complex features such as tuning surface strain to influence the behavior of catalytic NPs. Exploiting plasmonic properties and altering colloidal surface chemistry through functionalization are also emerging as important areas for rational design of catalytic NPs. This news article will highlight the key developments and challenges to the future design of catalytic NPs.

Le cognitive enhancement en milieu universitaire : entre souffrance psychique individuelle, culture de performance et insécurités sociales

Ce projet de mémoire s’intéresse à la mise en relation du cognitive enhancement observé dans les universités occidentales contemporaines et de la société dans laquelle il s’insère. Nous avons voulu détacher la perspective du phénomène des analyses principalement orientées vers les programmes de sciences de la santé et de droit, ainsi que de l’approche quantitative, clinique, athéorique et somme toute moralisatrice qui lui est usuellement accordée afin d’explorer la nature des pratiques d’usages de psychotropes des étudiants universitaires en sciences humaines et sociales en vue d’augmenter leurs performances cognitives, d’approfondir la compréhension des raisonnements sous-jacents à ces pratiques, puis de resituer ces derniers dans leur contexte élargi. Nous avons interrogé treize étudiants de divers programmes de sciences humaines et sociales consommant, ou ayant déjà consommé, des psychotropes en vue de rehausser leurs performances cognitives en contexte académique. Les résultats suggèrent un écart dans la nature de leurs pratiques d’usage par rapport aux domaines d’études habituellement préconisés en ce sens qu’une grande variété de substances sont considérées comme supports cognitifs ; ensuite, que le recours aux psychotropes dans une visée de performance cognitive s’éloigne des logiques de la nécessité médicale et de la toxicomanie. En premier lieu, le cognitive enhancement est associé par plusieurs à une souffrance psychique liée à une perte de repères existentiels et les étudiants y ont recours dans une optique de compréhension de soi et de quête de repères dans un monde qu’ils ressentent comme instable. En second lieu, la consommation de psychotropes s’apparente davantage à un désir de satisfaire aux conditions incertaines et menaçantes des demandes externes de performance telles qu’ils les appréhendent qu’à un souci de soigner quelque condition médicale de la cognition. Nous pensons que le rapport au psychotrope qu’entretiennent les étudiants universitaires en sciences humaines et sociales s’insère en toute cohérence dans les discours et injonctions contemporaines de performance, en ce sens que leur souffrance psychique individuelle expose les limites de ce que la société attend d’eux.

Ocean acidification and the loss of phenolic substances in marine plants

Rising atmospheric CO2 often triggers the production of plant phenolics, including many that serve as herbivore deterrents, digestion reducers, antimicrobials, or ultraviolet sunscreens. Such responses are predicted by popular models of plant defense, especially resource availability models which link carbon availability to phenolic biosynthesis. CO2 availability is also increasing in the oceans, where anthropogenic emissions cause ocean acidification, decreasing seawater pH and shifting the carbonate system towards further CO2 enrichment. Such conditions tend to increase seagrass productivity but may also increase rates of grazing on these marine plants. Here we show that high CO2 / low pH conditions of OA decrease, rather than increase, concentrations of phenolic protective substances in seagrasses and eurysaline marine plants. We observed a loss of simple and polymeric phenolics in the seagrass Cymodocea nodosa near a volcanic CO2 vent on the Island of Vulcano, Italy, where pH values decreased from 8.1 to 7.3 and pCO2 concentrations increased ten-fold. We observed similar responses in two estuarine species, Ruppia maritima and Potamogeton perfoliatus, in in situ Free-Ocean-Carbon-Enrichment experiments conducted in tributaries of the Chesapeake Bay, USA. These responses are strikingly different than those exhibited by terrestrial plants. The loss of phenolic substances may explain the higher-than-usual rates of grazing observed near undersea CO2 vents and suggests that ocean acidification may alter coastal carbon fluxes by affecting rates of decomposition, grazing, and disease. Our observations temper recent predictions that seagrasses would necessarily be "winners" in a high CO2 world.

Enhancing SPH using moving least-squares and radial basis functions

In this paper we consider two sources of enhancement for the meshfree Lagrangian particle method smoothed particle hydrodynamics (SPH) by improving the accuracy of the particle approximation. Namely, we will consider shape functions constructed using: moving least-squares approximation (MLS); radial basis functions (RBF). Using MLS approximation is appealing because polynomial consistency of the particle approximation can be enforced. RBFs further appeal as they allow one to dispense with the smoothing-length - the parameter in the SPH method which governs the number of particles within the support of the shape function. Currently, only ad hoc methods for choosing the smoothing-length exist. We ensure that any enhancement retains the conservative and meshfree nature of SPH. In doing so, we derive a new set of variationally-consistent hydrodynamic equations. Finally, we demonstrate the performance of the new equations on the Sod shock tube problem.

Heat transfer performance investigation of nanofluids flow in pipe

Different types of base fluids, such as water, engine oil, kerosene, ethanol, methanol, ethylene glycol etc. are usually used to increase the heat transfer performance in many engineering applications. But these conventional heat transfer fluids have often several limitations. One of those major limitations is that the thermal conductivity of each of these base fluids is very low and this results a lower heat transfer rate in thermal engineering systems. Such limitation also affects the performance of different equipments used in different heat transfer process industries. To overcome such an important drawback, researchers over the years have considered a new generation heat transfer fluid, simply known as nanofluid with higher thermal conductivity. This new generation heat transfer fluid is a mixture of nanometre-size particles and different base fluids. Different researchers suggest that adding spherical or cylindrical shape of uniform/non-uniform nanoparticles into a base fluid can remarkably increase the thermal conductivity of nanofluid. Such augmentation of thermal conductivity could play a more significant role in enhancing the heat transfer rate than that of the base fluid. Nanoparticles diameters used in nanofluid are usually considered to be less than or equal to 100 nm and the nanoparticles concentration usually varies from 5% to 10%. Different researchers mentioned that the smaller nanoparticles concentration with size diameter of 100 nm could enhance the heat transfer rate more significantly compared to that of base fluids. But it is not obvious what effect it will have on the heat transfer performance when nanofluids contain small size nanoparticles of less than 100 nm with different concentrations. Besides, the effect of static and moving nanoparticles on the heat transfer of nanofluid is not known too. The idea of moving nanoparticles brings the effect of Brownian motion of nanoparticles on the heat transfer. The aim of this work is, therefore, to investigate the heat transfer performance of nanofluid using a combination of smaller size of nanoparticles with different concentrations considering the Brownian motion of nanoparticles. A horizontal pipe has been considered as a physical system within which the above mentioned nanofluid performances are investigated under transition to turbulent flow conditions. Three different types of numerical models, such as single phase model, Eulerian-Eulerian multi-phase mixture model and Eulerian-Lagrangian discrete phase model have been used while investigating the performance of nanofluids. The most commonly used model is single phase model which is based on the assumption that nanofluids behave like a conventional fluid. The other two models are used when the interaction between solid and fluid particles is considered. However, two different phases, such as fluid and solid phases is also considered in the Eulerian-Eulerian multi-phase mixture model. Thus, these phases create a fluid-solid mixture. But, two phases in the Eulerian-Lagrangian discrete phase model are independent. One of them is a solid phase and the other one is a fluid phase. In addition, RANS (Reynolds Average Navier Stokes) based Standard κ-ω and SST κ-ω transitional models have been used for the simulation of transitional flow. While the RANS based Standard κ-ϵ, Realizable κ-ϵ and RNG κ-ϵ turbulent models are used for the simulation of turbulent flow. Hydrodynamic as well as temperature behaviour of transition to turbulent flows of nanofluids through the horizontal pipe is studied under a uniform heat flux boundary condition applied to the wall with temperature dependent thermo-physical properties for both water and nanofluids. Numerical results characterising the performances of velocity and temperature fields are presented in terms of velocity and temperature contours, turbulent kinetic energy contours, surface temperature, local and average Nusselt numbers, Darcy friction factor, thermal performance factor and total entropy generation. New correlations are also proposed for the calculation of average Nusselt number for both the single and multi-phase models. Result reveals that the combination of small size of nanoparticles and higher nanoparticles concentrations with the Brownian motion of nanoparticles shows higher heat transfer enhancement and thermal performance factor than those of water. Literature suggests that the use of nanofluids flow in an inclined pipe at transition to turbulent regimes has been ignored despite its significance in real-life applications. Therefore, a particular investigation has been carried out in this thesis with a view to understand the heat transfer behaviour and performance of an inclined pipe under transition flow condition. It is found that the heat transfer rate decreases with the increase of a pipe inclination angle. Also, a higher heat transfer rate is found for a horizontal pipe under forced convection than that of an inclined pipe under mixed convection.

Le cognitive enhancement en milieu universitaire : entre souffrance psychique individuelle, culture de performance et insécurités sociales

Ce projet de mémoire s’intéresse à la mise en relation du cognitive enhancement observé dans les universités occidentales contemporaines et de la société dans laquelle il s’insère. Nous avons voulu détacher la perspective du phénomène des analyses principalement orientées vers les programmes de sciences de la santé et de droit, ainsi que de l’approche quantitative, clinique, athéorique et somme toute moralisatrice qui lui est usuellement accordée afin d’explorer la nature des pratiques d’usages de psychotropes des étudiants universitaires en sciences humaines et sociales en vue d’augmenter leurs performances cognitives, d’approfondir la compréhension des raisonnements sous-jacents à ces pratiques, puis de resituer ces derniers dans leur contexte élargi. Nous avons interrogé treize étudiants de divers programmes de sciences humaines et sociales consommant, ou ayant déjà consommé, des psychotropes en vue de rehausser leurs performances cognitives en contexte académique. Les résultats suggèrent un écart dans la nature de leurs pratiques d’usage par rapport aux domaines d’études habituellement préconisés en ce sens qu’une grande variété de substances sont considérées comme supports cognitifs ; ensuite, que le recours aux psychotropes dans une visée de performance cognitive s’éloigne des logiques de la nécessité médicale et de la toxicomanie. En premier lieu, le cognitive enhancement est associé par plusieurs à une souffrance psychique liée à une perte de repères existentiels et les étudiants y ont recours dans une optique de compréhension de soi et de quête de repères dans un monde qu’ils ressentent comme instable. En second lieu, la consommation de psychotropes s’apparente davantage à un désir de satisfaire aux conditions incertaines et menaçantes des demandes externes de performance telles qu’ils les appréhendent qu’à un souci de soigner quelque condition médicale de la cognition. Nous pensons que le rapport au psychotrope qu’entretiennent les étudiants universitaires en sciences humaines et sociales s’insère en toute cohérence dans les discours et injonctions contemporaines de performance, en ce sens que leur souffrance psychique individuelle expose les limites de ce que la société attend d’eux.

Green supply chain management practices and firm performance: evidence from Finland

In order to address the increasing stakeholder requirements for environmentally sustainable products and processes, firms often need the participation of their supply chain partners. Green supply chain management has emerged as a set of managerial practices that integrate environmental issues into supply chain management. If implemented successfully, green supply chain management can be a way to achieve competitive advantage while enhancing the environmental sustainability of the firm. The overall purpose of this dissertation is to contribute to the discussion on green supply chain management practices from the perspective of their drivers and performance implications. The theoretical background arises from the literature on competitive strategy, firm performance and green supply chain management. The research questions are addressed by analysing firm-level data from manufacturing, trading and logistics firms operating in Finland. The empirical data comes from two consecutive Finland State of Logistics surveys in 2012 and 2014, combined with financial reporting data from external databases. The data is analysed with multiple statistical methods. First, the thesis contributes to the discussion of the drivers of GSCM practices. To enhance the understanding of the relationship between competitive strategy and GSCM practices, a conceptual tool to describe generic competitive strategy approaches was developed. The findings suggest that firms pursuing marketing differentiation are more likely to be able to compete by having only small environmental effects and by adopting a more advanced form of external green supply chain management, such as a combination of strong environmental collaboration and the increased environmental monitoring of suppliers. Furthermore, customer requirements for environmental sustainability are found to be an important driver in the implementation of internal GSCM practices. Firms can respond to this customer pressure by passing environmental requirements on to their suppliers, either through environmental collaboration or environmental monitoring. Second, this thesis adds value to the existing literature on the effects of green supply chain management practices on firm performance. The thesis provides support for the idea that there is a positive relationship between GSCM practices and firm performance and enhances the understanding of how different types of GSCM practices are related to 1) financial, 2) operational and 3) environmental performance in manufacturing and logistics. The empirical results suggest that while internal GSCM practices have the strongest effect on environmentalperformance, environmental collaboration with customers seems to be the most effective way to improve financial performance. In terms of operational performance, the findings were more mixed, suggesting that the operational performance of firms is more likely to be affected by firm characteristics than by the choices they make regarding their environmental collaboration. This thesis is also one of the first attempts to empirically analyse the relationship between GSCM practices and performance among logistics service providers. The findings also have managerial relevance. Management, especially in manufacturing and logistics industries, may benefit by gaining knowledge about which types of GSCM practice could provide the largest benefits in terms of different performance dimensions. This thesis also has implications for policy-makers and regulators regarding how to promote environmentally friendly activities among 1) manufacturing; 2) trading; and 3) logistics firms.

Enhancing bioactive fatty acids of the meat from lambs reared in intensive systems through nutritional modulation

Tese de Doutoramento em Ciências Veterinárias, especialidade de Produção Animal

New trends in food science: the use of nutraceuticals as an antiinflammatory therapeutic tool in exercise

Prolonged high-intensity training seems to result in increased systemic inflammation, which might explain muscle injury, delayed onset muscle soreness, and overtraining syndrome in athletes. Furthermore, an impaired immune function caused by strenuous exercise leads to the development of upper respiratory tract infections in athletes. Nutraceuticals might help counteract these performance-lowering effects. The use of nanotechnology is an interesting alternative to supply athletes with nutraceuticals, as many of these substances are insoluble in water and are poorly absorbed in the digestive tract. The present chapter starts with a brief review of the effects of exercise on immunity, followed by an analysis on how nutraceuticals such as omega-3 fatty acids, glutamine, BCAAs, or phytochemicals can counteract negative effects of strenuous exercise in athletes. Finally, how nanostructured delivery systems can constitute a new trend in enhancing bioavailability and optimizing the action of nutraceuticals will be discussed, using the example of food beverages.

Tannins in Ruminant Nutrition: Impact on Animal Performance and Quality of Edible Products

Tannins are widespread throughout the plant kingdom, occurring as hydrolysable and condensed tannins and at different levels in several animal feeding sources. Recent years have seen an increasing interest in the use of tannin-rich plants and plant extracts in ruminant diets for improving the quality of their edible products. Some results show that this strategy is effective in improving the fatty acid profile of meat and milk, increasing the level of health-beneficial fatty acids as well as enhancing the oxidative stability of the products. However, the use of tannin-rich feed in animal diets requires great care, due to its possible detrimental effects on animal performance and induction of metabolic disorders. Although promising, the results of studies on the effects of tannins on animal performance and quality of their products are still controversial, probably depending on type and chemical structure of tannins, amount ingested, composition of diet, and species of animal. In this chapter, the current knowledge regarding the effect of dietary tannins on animal performance and the quality of their products (meat and milk), particularly on the fatty acid profile, oxidative stability, and organoleptic properties, is reviewed. The tannin chemistry diversity and its occurrence in ruminant diets, as well as its beneficial and adverse effects on ruminants, will be briefly reviewed, and aspects related to oral cavity physiology, saliva production/composition, and postingestive effects will also be discussed.

Strategic Orientations, Dynamic Capabilities, and Firm Performance: an Analysis for Knowledge Intensive Business Services

The strategic orientations of a firm are considered crucial for enhancing firm performance and their impact can be even greater when associated with dynamic capabilities, particularly in complex and dynamic environments. This study empirically analyzes the relationship between market, entrepreneurial and learning orientations, dynamic capabilities, and performance using an integrative approach hitherto little explored. Using a sample of 209 knowledge intensive business service firms, this paper applies structural equation modeling to explore both direct effects of strategic orientations and the mediating role of dynamic capabilities on performance. The study demonstrates that learning orientation and one of the dimensions of entrepreneurial orientation have a direct positive effect on performance. On the other hand, dynamic capabilities mediate the relationships between some of the strategic orientations and firm performance. Overall, when dynamic capabilities are combined with the appropriate strategic orientations, they enhance firm performance. This paper contributes to a better understanding of the knowledge economy, given the important role knowledge intensive business services play in such a dynamic and pivotal sector.