Optimized phase pupil masks for extended depths of field

By properly designing a phase pupil mask to modulate or encode the optical images and then digitally restoring them, one can greatly extend the depth of field and improve image quality. The original works done by Dowski and Cathey introduce the use of a cubic phase pupil mask to extend the depth of field. The theoretical and experimental researches all verified its effectiveness. In this paper, we suggest the use of an exponential phase pupil mask to extend the depth of field. This phase mask has two variable parameters for designing to control the shape of the mask so as to modulate the wave-front more flexible. We employ an optimization procedure based on the Fisher information metric to obtain the optimum values of the parameters for the exponential and the cubic masks, respectively. A series of performance comparisons between these two optimized phase masks in extending the depth of field are then done. The results show that the exponential phase mask provide slight advantage to the cubic one in several aspects. (c) 2006 Elsevier B.V. All rights reserved.

Impact of polarized illumination on high NA imaging in ArF immersion lithography at 45 nm node

Immersion lithography has been considered as the mainstream technology to extend the feasibility of optical lithography to further technology nodes. Using proper polarized illumination in an immersion lithographic tool is a powerful means to enhance the image quality and process capability for high numerical aperture (NA) imaging. In this paper, the impact of polarized illumination on high NA imaging in ArF immersion lithography for 45 nm dense lines and semi-dense lines is studied by PROLITH simulation. The normalized image log slope (NILS) and exposure defocus (ED) window are simulated under various polarized illumination modes, and the impact of polarized illumination on image quality and process latitude is analyzed. (C) 2007 Elsevier GmbH. All rights reserved.

Elimination of zero-order diffraction in digital holography

A simple method to suppress the zero-order diffraction in the reconstructed image of digital holography is presented. In this method, the Laplacian of a detected hologram is used instead of the hologram itself for numerical reconstruction by computing the discrete Fresnel integral. This method can significantly improve the image quality and give better resolution and higher accuracy of the reconstructed image. The main advantages of this method are its simplicity in experimental requirements and convenience in data processing. (C) 2002 Society of Photo-optical Instrumentation Engineers.

Mass spectrometry coupled to imaging techniques: The better the view the greater the challenge

These are definitively exciting times for membrane lipid researchers. Once considered just as the cell membrane building blocks, the important role these lipids play is steadily being acknowledged. The improvement occurred in mass spectrometry techniques (MS) allows the establishment of the precise lipid composition of biological extracts. However, to fully understand the biological function of each individual lipid species, we need to know its spatial distribution and dynamics. In the past 10 years, the field has experienced a profound revolution thanks to the development of MS-based techniques allowing lipid imaging (MSI). Images reveal and verify what many lipid researchers had already shown by different means, but none as convincing as an image: each cell type presents a specific lipid composition, which is highly sensitive to its physiological and pathological state. While these techniques will help to place membrane lipids in the position they deserve, they also open the black box containing all the unknown regulatory mechanisms accounting for such tailored lipid composition. Thus, these results urges to different disciplines to redefine their paradigm of study by including the complexity revealed by the MSI techniques.

Extracción de servicios TS en receptor profesional de DVB-T2.

[Es]Este documento explica el procedimiento seguido para desarrollar la última etapa de un decodificador de DVB-T2, que consiste en la extracción de un archivo de vídeo desde un archivo binario resultante del resto del decodificador. Este decodificador se trata del software de un receptor desarrollado por el departamento de TSR (Tratamiento de Señal y Radiocomunicaciones) de la Escuela de Ingenieros de Bilbao en el año 2010. Dicho software es capaz de analizar la señal recibida de DVB-T2 para calcular la tasa de errores y conocer otros parámetros relevantes como el tipo de modulación utilizado. No obstante, para analizar de manera subjetiva las mejoras de DVB-T2 e incluso para determinar de qué manera afectan los errores a la calidad de la imagen es necesario visualizar el video transmitido. Por esta razón se ha comenzado un proyecto en el que el objetivo es programar un nuevo software que proporcione un archivo que contenga el video en cuestión. Este software se ha programado en lenguaje del programa Matlab, y toma el fichero resultante del receptor como entrada, para procesarlo y obtener uno nuevo con el vídeo. De modo que una vez programado y probado para su corrección, se aplica a continuación del receptor del departamento TSR. Una vez obtenido el vídeo es posible comparar la calidad de la imagen con diferentes tasas de error en la comunicación, simulando transmisiones en diferentes ámbitos cada uno con su correspondiente ruido. De esta manera, se estima con muy alta precisión el comportamiento de una transmisión real dependiendo de la climatología y otros factores que afecten a la relación señal a ruido.

Qualidade da imagem nas pacientes com suspeita de Endometriose infiltrada profunda : comparação entre a ultrassonografia transvaginal antes e após a realização do preparo retal

Comparar a qualidade da imagem entre a ultrassonografia transvaginal sem preparo intestinal e após preparo intestinal nas pacientes com suspeita de endometriose infiltrativa profunda do compartimento posterior e avaliar do grau de desconforto das pacientes em relação ao preparo intestinal. Estudo transversal com dados coletados prospectivamente, incluindo 39 pacientes com suspeita clínica de endometriose do compartimento posterior do ambulatório de Endometriose do Hospital Universitário Pedro Ernesto (HUPE) da Universidade do Estado do Rio de Janeiro (UERJ), no Rio de Janeiro. As pacientes foram submetidas à ultrassonografia transvaginal (USTVG) sem preparo intestinal prévio, seguido de nova USTVG uma hora após realização do enema retal. Os vídeos dos exames gravados foram editados, com ênfase na avaliação do compartimento posterior, com interesse na identificação do nódulo retrocervical e do retossigmóide. Foram graduados conforme a qualidade da imagem pelo examinador e por um radiologista (ambos mascarados), que marcaram uma nota de 0 a 10, usando a escala analógica visual. Restaram apenas 26 pacientes. Em relação ao desconforto devido a realização do enema retal, todas pacientes (100%) relataram apenas um desconforto discreto. Conforme a opção escolhida pelos avaliadores em relação ao melhor método, eles concordaram em 13 (50%) pacientes que a ultrassonografia transvaginal com preparo retal é melhor. Foi usado o teste não-paramétrico de Wilcoxon para amostras dependentes. O p-valor obtido foi de 0.042, considerado significativo (abaixo de 0.05). Isto significa que a realização do enema retal antes da realização da ultrassonografia transvaginal proporcionou uma qualidade melhor na avaliação dos nódulos. A diferença entre as avaliações com e sem preparo retal é maior nos nódulos menores que 2cm, porque encontramos a diferença de 1,1 entre os valores das medianas dos dois tipos de exames. Nos nódulos maiores que 2cm, a diferença encontrada foi de apenas 0,65. A realização do enema retal previamente à realização da ultrassonografia transvaginal no diagnóstico do nódulo endometriótico mostra uma melhora discretamente significativa na qualidade da imagem, comparativamente a não realização de preparo intestinal prévio. Somente nos casos onde o nódulo era menor que 2 cm, foram encontrados valores estatisticamente significativos com o preparo retal. O enema retal causa discreto desconforto, porém isto não parece ser um fator limitante na realização da ultrassonografia com preparo intestinal.

Avaliação de imagens através de Similaridade Estrutural e do conceito de Mínima Diferença de Cor Perceptível.

A avaliação objetiva da qualidade de imagens é de especial importância em diversas aplicações, por exemplo na compressão de imagens, onde pode ser utilizada para regular a taxa que deve ser empregada para que haja a máxima compressão (permitindo perda de dados) sem comprometer a qualidade final; outro exemplo é na inserção de marcas dágua, isto é, introdução de informações descritivas utilizadas para atestar a autenticidade de uma imagem, que devem ser invisíveis para o observador. O SSIM (Structural SIMilarity) é uma métrica de avaliação objetiva da qualidade de imagens de referência completa projetada para imagens em tons de cinza. Esta dissertação investiga sua aplicação na avaliação de imagens coloridas. Para tanto, inicialmente é feito um estudo do SSIM utilizando quatro diferentes espaços de cores RGB, YCbCr, Lαβ e CIELAB. O SSIM é primeiramente calculado nos canais individuais desses espaços de cores. Em seguida, com inspiração no trabalho desenvolvido em (1) são testadas formas de se combinar os valores SSIM obtidos para cada canal em um valor único os chamados SSIM Compostos. Finalmente, a fim de buscar melhores correlações entre SSIM e avaliação subjetiva, propomos a utilização da mínima diferença de cor perceptível, calculada utilizando o espaço de cores CIELAB, conjuntamente com o SSIM. Para os testes são utilizados três bancos de dados de imagens coloridas, LIVE, IVC e TID, a fim de se conferir consistência aos resultados. A avaliação dos resultados é feita utilizando as métricas empregadas pelo VQEG (Video Quality Experts Group) para a avaliação da qualidade de vídeos, com uma adaptação. As conclusões do trabalho sugerem que os melhores resultados para avaliação da qualidade de imagens coloridas usando o SSIM são obtidas usando os canais de luminância dos espaços de cores YCbCr, Lαβ e especialmente o CIELAB. Também se concluiu que a utilização da mínima diferença de cor perceptível contribui para o melhoramento dos resultados da avaliação objetiva.

Liquid crystal over silicon device characteristics for holographic projection of high-definition television images.

We discuss some fundamental characteristics of a phase-modulating device suitable to holographically project a monochrome video frame with 1280 x 720 resolution. The phase-modulating device is expected to be a liquid crystal over silicon chip with silicon area similar to that of commercial devices. Its basic characteristics, such as number of pixels, bits per pixel, and pixel dimensions, are optimized in terms of image quality and optical efficiency. Estimates of the image quality are made from the noise levels and contrast, while efficiency is calculated by considering the beam apodization, device dead space, diffraction losses, and the sinc envelope.

Atmospheric turbulence mitigation using complex wavelet-based fusion

Restoring a scene distorted by atmospheric turbulence is a challenging problem in video surveillance. The effect, caused by random, spatially varying, perturbations, makes a model-based solution difficult and in most cases, impractical. In this paper, we propose a novel method for mitigating the effects of atmospheric distortion on observed images, particularly airborne turbulence which can severely degrade a region of interest (ROI). In order to extract accurate detail about objects behind the distorting layer, a simple and efficient frame selection method is proposed to select informative ROIs only from good-quality frames. The ROIs in each frame are then registered to further reduce offsets and distortions. We solve the space-varying distortion problem using region-level fusion based on the dual tree complex wavelet transform. Finally, contrast enhancement is applied. We further propose a learning-based metric specifically for image quality assessment in the presence of atmospheric distortion. This is capable of estimating quality in both full-and no-reference scenarios. The proposed method is shown to significantly outperform existing methods, providing enhanced situational awareness in a range of surveillance scenarios. © 1992-2012 IEEE.

A TOF-PET prototype with position sensitive PMT readout

A prototype of time-of-flight positron emission computed tomography (TOF-PET) has been developed for acquiring the coincident detection of 511 keV gamma-rays produced from positron annihilation. It consists of two 80.5 mmx80.5 mm LYSO scintillator arrays (composed of 35 x35 pixel finger crystals) with the position sensitive photomultiplier tubes R2487 as the readout. Each array is composed of 2 mm x2 mm x 15 mm finger crystals and the average pixel pitch is 2.30 mm. The measured results indicate that the TOF information has the potential to significantly enhance the image quality by improving the noise variance in the image reconstruction. The best spatial resolution (FWHM) of the prototype for the pairs of 511 keV gamma-rays is 1.98 mm and 2.16 mm in the x and y directions, respectively, which are smaller than the average pixel pitch of 2.30 mm.

ARM处理器在AFM纳米操作系统中的应用

文章介绍了在原子力显微镜(AFM)纳米操作系统中ARM处理器的应用及开发,在此基础上搭建了具有3D力反馈的纳米操作系统。结合AFM纳米操作系统的实时性问题,进行了ARM开发板的系统软件架构和PSD(四象限光电检测器)信号的PID控制结果的分析,使纳米操作系统在实时性和成像的质量等方面都得到相应改进。

地球介质非线性与各向异性的地震波响应及其成像效应

The practice of geophysical prospecting shows us the complex interior earth. The studies of the complexity play an important role and practical guide for the subsurface structure. At present, the complexity of the earth mainly means lateral and vertical homogeneity, anisotropy and non-linear quality. And the anisotropy and non-linear media studies become the frontier in seismology and exploration seismology. This paper summarizes the development of complexities and presents the forward and inverse in the non-linear and anisotropic media. Firstly, the paper introduces the theory of seismic wave propagation in the non-linear and anisotropic media, the theoretical basis for simulation and inversion research. Secondly, high quality numerical simulation method with little dispersion has been developed to investigate the influence of complexity including anisotropy and non-linear multi-component seismograms. Because most real data in seismology have a single component, we developed two aspects work on anisotropic multi-component imaging. One is prestack reflection migration. The result show that distorted images are obtained if data from anisotropic media are migrated using isotropic extrapolation. Moreover, image quality will be improved greatly after considering anisotropy in subsurface layers. The other one is the we take advantage of multi-component data to inversion of the anisotropic parameters jointly seimic reflection travel time and polarization information. Based on these research works, we get the following results: 1.Combing numerical simulation, systematical studies indicate that anisotropy and non-linear seismograms characters are significant to detect cracked belts in the earth and to understand deformation field and mechanism. 2.Based on anisotropic media models, we developed an efficient prestack migration method for subsurface structure and different observation methods seismic data, which improving the imaging quality with VSP, seismograms and real data. 3.Jointly seismic inversion combining seismic anisotropic reflection traveltimes and polarizations data show that the complete wrong inversion and the following explanation will be resulted by ignoring anisotropy.

波动方程偏移速度分析

On the subject of oil and gas exploration, migration is an efficacious technique for imagining structures underground. Wave-equation migration (WEM) dominates over other migration methods in accuracy, despite of higher computational cost. However, the advantages of WEM will emerge as the progress of computer technology. WEM is sensitive to velocity model more than others. Small velocity perturbations result in grate divergence in the image pad. Currently, Kirrchhoff method is still very popular in the exploration industry for the reason of difficult to provide precise velocity model. It is very urgent to figure out a way to migration velocity modeling. This dissertation is mainly devoted to migration velocity analysis method for WEM: 1. In this dissertation, we cataloged wave equation prestack depth migration. The concept of migration is introduced. Then, the analysis is applied to different kinds of extrapolate operator to demonstrate their accuracy and applicability. We derived the DSR and SSR migration method and apply both to 2D model. 2. The output of prestack WEM is in form of common image gathers (CIGs). Angle domain common image gathers (ADCIGs) gained by wave equation are proved to be free of artifacts. They are also the most potential candidates for migration velocity analysis. We discussed how to get ADCIGs by DSR and SSR, and obtained ADCIGs before and after imaging separately. The quality of post stack image is affected by CIGs, only the focused or flattened CIGs generate the correct image. Based on wave equation migration, image could be enhanced by special measures. In this dissertation we use both prestack depth residual migration and time shift imaging condition to improve the image quality. 3. Inaccurate velocities lead to errors of imaging depth and curvature of coherent events in CIGs. The ultimate goal of migration velocity analysis (MVA) is to focus scattered event to correct depth and flatten curving event by updating velocities. The kinematic figures are implicitly presented by focus depth aberration and kinetic figure by amplitude. The initial model of Wave-equation migration velocity analysis (WEMVA) is the output of RMO velocity analysis. For integrity of MVA, we review RMO method in this dissertation. The dissertation discusses the general ideal of RMO velocity analysis for flat and dipping events and the corresponding velocity update formula. Migration velocity analysis is a very time consuming work. Respect to computational convenience, we discus how RMO works for synthetic source record migration. In some extremely situation, RMO method fails. Especially in the areas of poorly illuminated or steep structure, it is very difficult to obtain enough angle information for RMO. WEMVA based on wave extrapolate theory, which successfully overcome the drawback of ray based methods. WEMVA inverses residual velocities with residual images. Based on migration regression, we studied the linearized scattering operator and linearized residual image. The key to WEMVA is the linearized residual image. Residual image obtained by Prestack residual migration, which based on DSR is very inefficient. In this dissertation, we proposed obtaining residual migration by time shift image condition, so that, WEMVA could be implemented by SSR. It evidently reduce the computational cost for this method.

地震波场延拓+菲涅尔体叠加方法及成像效果

In the increasingly enlarged exploration target, deep target layer(especially for the reservoir of lava) is a potential exploration area. As well known, the reflective energy becomes weak because the seismic signals of reflection in deep layer are absorbed and attenuate by upper layer. Caustics and multi-values traveltime in wavefield are aroused by the complexity of stratum. The ratio of signal to noise is not high and the fold numbers are finite(no more than 30). All the factors above affect the validity of conventional processing methods. So the high S/N section of stack can't always be got with the conventional stack methods even if the prestack depth migration is used. So it is inevitable to develop another kind of stack method instead. In the last a few years, the differential solution of wave equation was hold up by the condition of computation. Kirchhoff integral method rose in the initial stages of the ninetieth decade of last century. But there exist severe problems in it, which is are too difficult to resolve, so new method of stack is required for the oil and gas exploration. It is natural to think about upgrading the traditionally physic base of seismic exploration methods and improving those widely used techniques of stack. On the other hand, great progress is depended on the improvement in the wave differential equation prestack depth migration. The algorithm of wavefield continuation in it is utilized. In combination with the wavefield extrapolation and the Fresnel zone stack, new stack method is carried out It is well known that the seismic wavefield observed on surface comes from Fresnel zone physically, and doesn't comes from the same reflection points only. As to the more complex reflection in deep layer, it is difficult to describe the relationship between the reflective interface and the travel time. Extrapolation is used to eliminate caustic and simplify the expression of travel time. So the image quality is enhanced by Fresnel zone stack in target. Based on wave equation, high-frequency ray solution and its character are given to clarify theoretical foundation of the method. The hyperbolic and parabolic travel time of the reflection in layer media are presented in expression of matrix with paraxial ray theory. Because the reflective wave field mainly comes from the Fresnel Zone, thereby the conception of Fresnel Zone is explained. The matrix expression of Fresnel zone and projected Fresnel zone are given in sequence. With geometrical optics, the relationship between object point in model and image point in image space is built for the complex subsurface. The travel time formula of reflective point in the nonuniform media is deduced. Also the formula of reflective segment of zero-offset and nonzero offset section is provided. For convenient application, the interface model of subsurface and curve surface derived from conventional stacks DMO stack and prestack depth migration are analyzed, and the problem of these methods was pointed out in aspects of using data. Arc was put forward to describe the subsurface, thereby the amount of data to stack enlarged in Fresnel Zone. Based on the formula of hyperbolic travel time, the steps of implementation and the flow of Fresnel Zone stack were provided. The computation of three model data shows that the method of Fresnel Zone stack can enhance the signal energy and the ratio of signal to noise effectively. Practical data in Xui Jia Wei Zhi, a area in Daqing oilfield, was processed with this method. The processing results showed that the ability in increasing S/N ratio and enhancing the continuity of weak events as well as confirming the deep configuration of volcanic reservoir is better than others. In deeper target layer, there exists caustic caused by the complex media overburden and the great variation of velocity. Travel time of reflection can't be exactly described by the formula of travel time. Extrapolation is bring forward to resolve the questions above. With the combination of the phase operator and differential operator, extrapolating operator adaptable to the variation of lateral velocity is provided. With this method, seismic records were extrapolated from surface to any different deptlis below. Wave aberration and caustic caused by the inhomogenous layer overburden were eliminated and multi-value curve was transformed into the curve.of single value. The computation of Marmousi shows that it is feasible. Wave field continuation extends the Fresnel Zone stack's application.

利用分频与反演提高地震资料信噪比与分辨率方法研究

This thesis mainly talks about the wavelet transfrom and the frequency division method. It describes the frequency division processing on prestack or post-stack seismic data and application of inversion noise attenuation, frequency division residual static correction and high resolution data in reservoir inversion. This thesis not only describes the frequency division and inversion in theory, but also proves it by model calculation. All the methods are integrated together. The actual data processing demonstrates the applying results. This thesis analyzes the differences and limitation between t-x prediction filter and f-x prediction filter noise attenuation from wavelet transform theory. It considers that we can do the frequency division attenuation process of noise and signal by wavelet frequency division theory according to the differences of noise and signal in phase, amplitude and frequency. By comparison with the f-x coherence noise, removal method, it approves the effects and practicability of frequency division in coherence and random noise isolation. In order to solve the side effects in non-noise area, we: take the area constraint method and only apply the frequency division processing in the noise area. So it can solve the problem of low frequency loss in non-noise area. The residual moveout differences in seismic data processing have a great effect on stack image and resolutions. Different frequency components have different residual moveout differences. The frequency division residual static correction realizes the frequency division and the calculation of residual correction magnitude. It also solves the problems of different residual correction magnitude in different frequency and protects the high frequency information in data. By actual data processing, we can get good results in phase residual moveout differences elimination of pre-stack data, stack image quality and improvement of data resolution. This thesis analyses the characters of the random noises and its descriptions in time domain and frequency domain. Furthermore it gives the inversion prediction solution methods and realizes the frequency division inversion attenuation of the random noise. By the analysis of results of the actual data processing, we show that the noise removed by inversion has its own advantages. By analyzing parameter's about resolution and technology of high resolution data processing, this thesis describes the relations between frequency domain and resolution, parameters about resolution and methods to increase resolution. It also gives the processing flows of the high resolution data; the effect and influence of reservoir inversion caused by high resolution data. Finally it proves the accuracy and precision of the reservoir inversion results. The research results of this thesis reveal that frequency division noise attenuation, frequency residual correction and inversion noise attenuation are effective methods to increase the SNR and resolution of seismic data.