Guidelines for the design of online-questionnaires

As a new medium for questionnaire delivery, the internet has the potential to revolutionise the survey process. Online (web-based) questionnaires provide several advantages over traditional survey methods in terms of cost, speed, appearance, flexibility, functionality, and usability (Bandilla et al., 2003; Dillman, 2000; Kwak and Radler, 2002). Online-questionnaires can also provide many capabilities not found in traditional paper-based questionnaires: they can include pop-up instructions and error messages; they can incorporate links; and it is possible to encode difficult skip patterns making such patterns virtually invisible to respondents. Despite this, and the introduction of numerous tools to support online-questionnaire creation, current electronic survey design typically replicates that of paper-based questionnaires, failing to harness the full power of the electronic delivery medium. Worse, a recent environmental scan of online-questionnaire design tools found that little, if any, support is incorporated within these tools to guide questionnaire designers according to best-practice (Lumsden and Morgan, 2005). This article introduces a comprehensive set of guidelines - a practical reference guide - for the design of online-questionnaires.

Mobile app reading speed test

Aim: To validate the accuracy and repeatability of a mobile app reading speed test compared with the traditional paper version. Method: Twenty-one subjects wearing their full refractive correction glasses read 14 sentences of decreasing print size between 1.0 and -0.1 logMAR, each consisting of 14 words (Radner reading speed test) at 40 cm with a paper-based chart and twice on iPad charts. Time duration was recorded with a stop watch for the paper chart and on the App itself for the mobile chart allowing critical print size (CPS) and optimal reading speed (ORS) to be derived objectively. Results: The ORS was higher for the mobile app charts (194±29 wpm; 195±25 wpm) compared with the paper chart (166±20 wpm; F=57.000, p<0.001). The CPS was lower for the mobile app charts (0.17±0.20 logMAR; 0.18±0.17 logMAR) compared with the paper chart (0.25±0.17 logMAR; F=5.406, p=0.009). The mobile app test had a mean difference repeatability of 0.30±22.5 wpm, r=0.917 for ORS, and a CPS of 0.0±0.2 logMAR, r=0.769. Conclusions: Repeatability of the app reading speed test is as good (ORS) or better (CPS) than previous studies on the paper test. While the results are not interchangeable with paper-based charts, mobile app tablet-based tests of reading speed are reliable and rapid to perform, with the potential to capture functional visual ability in research studies and clinical practice.

Extraction of Fraud Schemes from Trade Series

2000 Mathematics Subject Classification: 62H30, 62M10, 62M20, 62P20, 94A13.

Model and performance of a no-reference quality assessment metric for video streaming

Video streaming via Transmission Control Protocol (TCP) networks has become a popular and highly demanded service, but its quality assessment in both objective and subjective terms has not been properly addressed. In this paper, based on statistical analysis a full analytic model of a no-reference objective metric, namely pause intensity (PI), for video quality assessment is presented. The model characterizes the video playout buffer behavior in connection with the network performance (throughput) and the video playout rate. This allows for instant quality measurement and control without requiring a reference video. PI specifically addresses the need for assessing the quality issue in terms of the continuity in the playout of TCP streaming videos, which cannot be properly measured by other objective metrics such as peak signal-to-noise-ratio, structural similarity, and buffer underrun or pause frequency. The performance of the analytical model is rigidly verified by simulation results and subjective tests using a range of video clips. It is demonstrated that PI is closely correlated with viewers' opinion scores regardless of the vastly different composition of individual elements, such as pause duration and pause frequency which jointly constitute this new quality metric. It is also shown that the correlation performance of PI is consistent and content independent. © 2013 IEEE.

Internet use by patients with bipolar disorder:results from an international multisite survey

There is considerable international interest in online education of patients with bipolar disorder, yet little understanding of how patients use the Internet and other sources to seek information. 1171 patients with bipolar disorder diagnosis in 17 countries completed a paper-based, anonymous survey. 81% of the patients used the Internet, a percentage similar to the general public. Older age, less education, and challenges in country telecommunications infrastructure and demographics decreased the odds of using the Internet. About 78% of the Internet users looked online for information on bipolar disorder or 63% of the total sample. More years of education in relation to the country mean, and feeling very confident about managing life decreased the odds of seeking information on bipolar disorder online, while having attended support groups increased the odds. Patients who looked online for information on bipolar disorder consulted medical professionals plus a mean of 2.3 other information sources such as books, physician handouts, and others with bipolar disorder. Patients not using the Internet consulted medical professionals plus a mean of 1.6 other information sources. The percentage of patients with bipolar disorder who use the Internet is about the same as the general public. Other information sources remain important.

Vegetarians: A Typology for Foodservice Menu Development

There is currently a lack of research about the needs of vegetarians, from a practitioner or academic perspective. This paper contributes to filling this research gap, by discussing the needs of vegetarians who dine out and their current difficulties in participating in the dining experience, in the present context. Specifically, it is argued that the typology of vegetarians presented in this paper, based on their motivations to adopt the chosen diet, might prove useful for restaurants in order to understand the vegetarian guest and develop menu items and services that will better cater to their needs. Recommendations for practitioners and future research areas are presented.

Online information seeking by patients with bipolar disorder:results from an international multisite survey

Background: Information seeking is an important coping mechanism for dealing with chronic illness. Despite a growing number of mental health websites, there is little understanding of how patients with bipolar disorder use the Internet to seek information. Methods: A 39 question, paper-based, anonymous survey, translated into 12 languages, was completed by 1222 patients in 17 countries as a convenience sample between March 2014 and January 2016. All patients had a diagnosis of bipolar disorder from a psychiatrist. Data were analyzed using descriptive statistics and generalized estimating equations to account for correlated data. Results: 976 (81 % of 1212 valid responses) of the patients used the Internet, and of these 750 (77 %) looked for information on bipolar disorder. When looking online for information, 89 % used a computer rather than a smartphone, and 79 % started with a general search engine. The primary reasons for searching were drug side effects (51 %), to learn anonymously (43 %), and for help coping (39 %). About 1/3 rated their search skills as expert, and 2/3 as basic or intermediate. 59 % preferred a website on mental illness and 33 % preferred Wikipedia. Only 20 % read or participated in online support groups. Most patients (62 %) searched a couple times a year. Online information seeking helped about 2/3 to cope (41 % of the entire sample). About 2/3 did not discuss Internet findings with their doctor. Conclusion: Online information seeking helps many patients to cope although alternative information sources remain important. Most patients do not discuss Internet findings with their doctor, and concern remains about the quality of online information especially related to prescription drugs. Patients may not rate search skills accurately, and may not understand limitations of online privacy. More patient education about online information searching is needed and physicians should recommend a few high quality websites.

The framework for REVIEWS: an exploration into design principles for an electronic medical early warning system observation chart

The observation chart is for many health professionals (HPs) the primary source of objective information relating to the health of a patient. Information Systems (IS) research has demonstrated the positive impact of good interface design on decision making and it is logical that good observation chart design can positively impact healthcare decision making. Despite the potential for good observation chart design, there is a paucity of observation chart design literature, with the primary source of literature leveraging Human Computer Interaction (HCI) literature to design better charts. While this approach has been successful, this design approach introduces a gap between understanding of the tasks performed by HPs when using charts and the design features implemented in the chart. Good IS allow for the collection and manipulation of data so that it can be presented in a timely manner that support specific tasks. Good interface design should therefore consider the specific tasks being performed prior to designing the interface. This research adopts a Design Science Research (DSR) approach to formalise a framework of design principles that incorporates knowledge of the tasks performed by HPs when using observation charts and knowledge pertaining to visual representations of data and semiology of graphics. This research is presented in three phases, the initial two phases seek to discover and formalise design knowledge embedded in two situated observation charts: the paper-based NEWS chart developed by the Health Service Executive in Ireland and the electronically generated eNEWS chart developed by the Health Information Systems Research Centre in University College Cork. A comparative evaluation of each chart is also presented in the respective phases. Throughout each of these phases, tentative versions of a design framework for electronic vital sign observation charts are presented, with each subsequent iteration of the framework (versions Alpha, Beta, V0.1 and V1.0) representing a refinement of the design knowledge. The design framework will be named the framework for the Retrospective Evaluation of Vital Sign Information from Early Warning Systems (REVIEWS). Phase 3 of the research presents the deductive process for designing and implementing V0.1 of the framework, with evaluation of the instantiation allowing for the final iteration V1.0 of the framework. This study makes a number of contributions to academic research. First the research demonstrates that the cognitive tasks performed by nurses during clinical reasoning can be supported through good observation chart design. Secondly the research establishes the utility of electronic vital sign observation charts in terms of supporting the cognitive tasks performed by nurses during clinical reasoning. Third the framework for REVIEWS represents a comprehensive set of design principles which if applied to chart design will improve the usefulness of the chart in terms of supporting clinical reasoning. Fourth the electronic observation chart that emerges from this research is demonstrated to be significantly more useful than previously designed charts and represents a significant contribution to practice. Finally the research presents a research design that employs a combination of inductive and deductive design activities to iterate on the design of situated artefacts.

La metáfora en los museos de historia social

Antes de la puesta en práctica de los archivos en papel en el siglo XIX había muchas formas líricas de conocer el pasado, por ejemplo, a través del canto y de la pintura. En la evolución de los museos del siglo XIX, los artefactos ocuparon el lugar del conocimiento correspondiente de la “verdad” que se creía existente en el papel archivado. El trabajo del Museo procedió con la certeza del sentido común de una correspondencia individualizada racional entre un artefacto y su significado. La confianza en la capacidad denotativa del artefacto era así la estrategia para transmitir significado a los visitantes. Los museos están alejándose ahora de la denotación como estrategia de comunicación primaria, y uno de los modos que surge es la metáfora. Así como se entendía antiguamente que el significado fijo de los objetos residía en su pura materialidad, ahora vemos el resurgir de la materialidad en los museos, pero esta vez a través de la metáfora, teóricamente entendida como apoyada en la experiencia material del mundo por parte de nuestros cuerpos humanos.

Maintaining legacy data: saving Belfast Harbour (UK) tide-gauge data (1902-2010)

Tide gauge data are identified as legacy data given the radical transition between observation method and required output format associated with tide gauges over the 20th-century. Observed water level variation through tide-gauge records is regarded as the only significant basis for determining recent historical variation (decade to century) in mean sea-level and storm surge. There are limited tide gauge records that cover the 20th century, such that the Belfast (UK) Harbour tide gauge would be a strategic long-term (110 years) record, if the full paper-based records (marigrams) were digitally restructured to allow for consistent data analysis. This paper presents the methodology of extracting a consistent time series of observed water levels from the 5 different Belfast Harbour tide gauges’ positions/machine types, starting late 1901. Tide-gauge data was digitally retrieved from the original analogue (daily) records by scanning the marigrams and then extracting the sequential tidal elevations with graph-line seeking software (Ungraph™). This automation of signal extraction allowed the full Belfast series to be retrieved quickly, relative to any manual x–y digitisation of the signal. Restructuring variably lengthed tidal data sets to a consistent daily, monthly and annual file format was undertaken by project-developed software: Merge&Convert and MergeHYD allow consistent water level sampling both at 60 min (past standard) and 10 min intervals, the latter enhancing surge measurement. Belfast tide-gauge data have been rectified, validated and quality controlled (IOC 2006 standards). The result is a consistent annual-based legacy data series for Belfast Harbour that includes over 2 million tidal-level data observations.

Addressing the theory practice gap in nurse education: evaluating teaching through audit against NMC standards and final management placement

Introduction
This paper outlines an innovative approach to auditing and evaluating the content of a management and leadership module for undergraduate nursing students after their final management clinical placement. Normally evaluations of teaching in a module take place at the end of a teaching module and therefore do not properly reflect the value of the teaching in relation to practical clinical experience.
Aim
This audit and evaluation sought to explore both the practical value of the teaching and learning, and also the degree to which it the teaching reflected against the NMC Standards of Education and Learning (2010 domain 3).
Methods
Having piloted the evaluative tool with an earlier cohort of nursing students, this evaluation explored both a quantitative assessment employing a Personal Response System (n =172), together with a qualitative dimension (n=116), thus delivering paper-based comments and reflections from students on the value and practicality of the module teaching theory to their final clinical management experience. The quantitative audit data were analysed for frequencies and cross tabulation and the qualitative audit data were thematically analysed.
Results
Results suggest a significant proportion of the students, appreciated the quality of the standard of teaching, but more importantly, ‘valued or highly valued’ the teaching and learning in relation to how it helped to significantly inform their management placement experience. A smaller proportion of the students underlined limitations and areas in which further improvement can be made in teaching and learning to the module.
Conclusion
Significantly positive evaluation by the students of the practical value of teaching and learning, to the theoretical management module. This has proved a useful auditing approach in assessing the theoretical teaching to student’s Level 3 clinical experience, and facilitated significant recommendations as far as developing the teaching and learning to better reflect the practice needs of nursing students

Virtual Reality as a tool to Assist Learning in Aerospace Assembly

This study examines whether virtual reality (VR) is more superior to paper-based instructions in increasing the speed at which individuals learn a new assembly task. Specifically, the work seeks to quantify any learning benefits when individuals have been given the opportunity and compares the performance of two groups using virtual and hardcopy media types to pre-learn the task. A build experiment based on multiple builds of an aircraft panel showed that a group of people who pre-learned the assembly task using a VR environment completed their builds faster (average build time 29.5% lower). The VR group also made fewer references to instructional materials (average number of references 38% lower) and made fewer errors than a group using more traditional, hard copy instructions. These outcomes were more pronounced during build one with differences in build time and number of references showing limited statistical differences.

Examining Factors Affecting Attitudes toward Nuclear Power in Taiwan

Thesis (Master's)--University of Washington, 2016-06

Exploring Intrinsic Gender Identity Using Second Life

Virtual Worlds (VWs) provide an environment to understand and explore notions of gender and identity, particularly given the ability for users to experiment with gender in online worlds. Our study analyses gender identity using the virtual space of Second Life (SL) to explore experiences and responses to gender in an avatar. We introduced 46 novice users to the VW of SL in order to see if real life gender influenced their choices of avatar. Participants selected the gender of their original avatar and once they were used to SL, they were then asked to change the gender of that avatar. We used mixed methods research consisting of paper based questionnaires (n=34) and focus groups (n=46) conducted in SL. Nearly all participants chose an initial avatar that reflected their real-life gender with females (n=22) reporting higher levels of identification with this initial avatar. Females were significantly more concerned with the gender-specific appearance of their initial avatar. On swapping gender, females reported higher levels of discomfort and many changed back before 7 minutes. Males (n=24) did not report significant discomfort with their changed-gender avatar and did not revert back to their original avatar as quickly. Our findings suggest that female participants in this study tended to reinforce gender binaries through such things as clothing, hairstyles and behaviors of their avatars. Male participants were less likely to experience discomfort through changing the gender of their avatar (with the males noting they still perceived an avatar with a female appearance as male).

MICROSCALE DIELECTRIC ANTI-REFLECTION COATINGS FOR PHOTOVOLTAICS

In order to power our planet for the next century, clean energy technologies need to be developed and deployed. Photovoltaic solar cells, which convert sunlight into electricity, are a clear option; however, they currently supply 0.1% of the US electricity due to the relatively high cost per Watt of generation. Thus, our goal is to create more power from a photovoltaic device, while simultaneously reducing its price. To accomplish this goal, we are creating new high efficiency anti-reflection coatings that allow more of the incident sunlight to be converted to electricity, using simple and inexpensive coating techniques that enable reduced manufacturing costs. Traditional anti-reflection coatings (consisting of thin layers of non-absorbing materials) rely on the destructive interference of the reflected light, causing more light to enter the device and subsequently get absorbed. While these coatings are used on nearly all commercial cells, they are wavelength dependent and are deposited using expensive processes that require elevated temperatures, which increase production cost and can be detrimental to some temperature sensitive solar cell materials. We are developing two new classes of anti-reflection coatings (ARCs) based on textured dielectric materials: (i) a transparent, flexible paper technology that relies on optical scattering and reduced refractive index contrast between the air and semiconductor and (ii) silicon dioxide (SiO2) nanosphere arrays that rely on collective optical resonances. Both techniques improve solar cell absorption and ultimately yield high efficiency, low cost devices. For the transparent paper-based ARCs, we have recently shown that they improve solar cell efficiencies for all angles of incident illumination reducing the need for costly tracking of the sun’s position. For a GaAs solar cell, we achieved a 24% improvement in the power conversion efficiency using this simple coating. Because the transparent paper is made from an earth abundant material (wood pulp) using an easy, inexpensive and scalable process, this type of ARC is an excellent candidate for future solar technologies. The coatings based on arrays of dielectric nanospheres also show excellent potential for inexpensive, high efficiency solar cells. The fabrication process is based on a Meyer rod rolling technique, which can be performed at room-temperature and applied to mass production, yielding a scalable and inexpensive manufacturing process. The deposited monolayer of SiO2 nanospheres, having a diameter of 500 nm on a bare Si wafer, leads to a significant increase in light absorption and a higher expected current density based on initial simulations, on the order of 15-20%. With application on a Si solar cell containing a traditional anti-reflection coating (Si3N4 thin-film), an additional increase in the spectral current density is observed, 5% beyond what a typical commercial device would achieve. Due to the coupling between the spheres originated from Whispering Gallery Modes (WGMs) inside each nanosphere, the incident light is strongly coupled into the high-index absorbing material, leading to increased light absorption. Furthermore, the SiO2 nanospheres scatter and diffract light in such a way that both the optical and electrical properties of the device have little dependence on incident angle, eliminating the need for solar tracking. Because the layer can be made with an easy, inexpensive, and scalable process, this anti-reflection coating is also an excellent candidate for replacing conventional technologies relying on complicated and expensive processes.