High load transit line passenger transmission and productiveness efficiencies

Performance of urban transit systems may be quantified and assessed using transit capacity and productive capacity in planning, design and operational management activities. Bunker (4) defines important productive performance measures of an individual transit service and transit line, which are extended in this paper to quantify efficiency and operating fashion of transit services and lines. Comparison of a hypothetical bus line’s operation during a morning peak hour and daytime hour demonstrates the usefulness of productiveness efficiency and passenger transmission efficiency, passenger churn and average proportion line length traveled to the operator in understanding their services’ and lines’ productive performance, operating characteristics, and quality of service. Productiveness efficiency can flag potential pass-up activity under high load conditions, as well as ineffective resource deployment. Proportion line length traveled can directly measure operating fashion. These measures can be used to compare between lines/routes and, within a given line, various operating scenarios and time horizons to target improvements. The next research stage is investigating within-line variation using smart card passenger data and field observation of pass-ups. Insights will be used to further develop practical guidance to operators.

High load transit line passenger transmission and productiveness efficiencies

Performance of urban transit systems may be quantified and assessed using transit capacity and productive capacity in planning, design and operational management activities. Bunker (4) defines important productive performance measures of an individual transit service and transit line, which are extended in this paper to quantify efficiency and operating fashion of transit services and lines. Comparison of a hypothetical bus line’s operation during a morning peak hour and daytime hour demonstrates the usefulness of productiveness efficiency and passenger transmission efficiency, passenger churn and average proportion line length traveled to the operator in understanding their services’ and lines’ productive performance, operating characteristics, and quality of service. Productiveness efficiency can flag potential pass-up activity under high load conditions, as well as ineffective resource deployment. Proportion line length traveled can directly measure operating fashion. These measures can be used to compare between lines/routes and, within a given line, various operating scenarios and time horizons to target improvements. The next research stage is investigating within-line variation using smart card passenger data and field observation of pass-ups. Insights will be used to further develop practical guidance to operators.

A non-linear dynamic analysis of heavy haul track line sleepers under wheel flat

Significant wheel-rail dynamic forces occur because of imperfections in the wheels and/or rail. One of the key responses to the transmission of these forces down through the track is impact force on the sleepers. Dynamic analysis of nonlinear systems is very complicated and does not lend itself easily to a classical solution of multiple equations. Trying to deduce the behaviour of track components from experimental data is very difficult because such data is hard to obtain and applies to only the particular conditions of the track being tested. The finite element method can be the best solution to this dilemma. This paper describes a finite element model using the software package ANSYS for various sized flat defects in the tread of a wheel rolling at a typical speed on heavy haul track. The paper explores the dynamic response of a prestressed concrete sleeper to these defects.

Underground power cable environment on-line monitoring and analysis

Knowledge of cable parameters has been well established but a better knowledge of the environment in which the cables are buried lags behind. Research in Queensland University of Technology has been aimed at obtaining and analysing actual daily field values of thermal resistivity and diffusivity of the soil around power cables. On-line monitoring systems have been developed and installed with a data logger system and buried spheres that use an improved technique to measure thermal resistivity and diffusivity over a short period. Results based on long term continuous field data are given. A probabilistic approach is developed to establish the correlation between the measured field thermal resistivity values and rainfall data from weather bureau records. This data from field studies can reduce the risk in cable rating decisions and provide a basis for reliable prediction of “hot spot” of an existing cable circuit

Implementation Guide for Surveillance of Central Line Associated Bloodstream Infection -- [Consultation Edition]

The implementation guide for the surveillance of CLABSI in intensive care units (ICU) was produced by the Healthcare Associated Infection (HAI) Technical Working Group of the Australian Commission on Safety and Quality in Health Care(ACSQHC), and endorsed by the ACSQHC HAI Advisory Committee. State surveillance units, the ACSQHC and the Australian and New Zealand Intensive Care Society (ANZICS) have representatives on the Technical Working Group, and have provided input into this document.

Optimal distribution network reinforcement considering load growth, line loss, and reliability

In this paper, a new comprehensive planning methodology is proposed for implementing distribution network reinforcement. The load growth, voltage profile, distribution line loss, and reliability are considered in this procedure. A time-segmentation technique is employed to reduce the computational load. Options considered range from supporting the load growth using the traditional approach of upgrading the conventional equipment in the distribution network, through to the use of dispatchable distributed generators (DDG). The objective function is composed of the construction cost, loss cost and reliability cost. As constraints, the bus voltages and the feeder currents should be maintained within the standard level. The DDG output power should not be less than a ratio of its rated power because of efficiency. A hybrid optimization method, called modified discrete particle swarm optimization, is employed to solve this nonlinear and discrete optimization problem. A comparison is performed between the optimized solution based on planning of capacitors along with tap-changing transformer and line upgrading and when DDGs are included in the optimization.

The Brisbane Line

A short 27 mins docudrama film. The Brisbane Line is a neo noir drama-documentary depicting the forgotten history surrounding the subtropical capital of Queensland, Australia. Set in the shadows of this sunshine city's unsolved crime, the film explores gaps between fact and fiction, memory and myth and excavates Brisbane's original sin [from DVD container]. The Brisbane Line is a film noir about the 1940s police force & corruption in Brisbane. The film is a creative research output, screened at Tribal Cinemas, Brisbane on the 8th November 2011.

Calling for help : a responsive evaluation of Child Health Line

The project examined the responsiveness of the telenursing service provided by the Child Health Line (hereinafter referred to as CHL). It aimed to provide an account of population usage of the service, the call request types and the response of the service to the calls. In so doing, the project extends the current body of knowledge pertaining to the provision of parenting support through telenursing. Approximately 900 calls to the CHL were audio-recorded over the December 2005-2006 Christmas-New Year period. A protocol was developed to code characteristics of the call, the interactional features between the caller and nurse call-taker, and the extent to which there was (a) agreement on problem definition and the plan of action and (b) interactional alignment between nurse and caller. A quantitative analysis examined the frequencies of the main topics covered in calls to the CHL and any statistical associations between types of calls, length of calls and nurse-caller alignment. In addition, a detailed qualitative analysis was conducted on a subset of calls dealing with the nurse management of calls seeking medical advice and information. Key findings include: • Overall, 74% of the calls discussed parenting and child development issues, 48% discussed health/medical issues, and 16% were information-seeking calls. • More specifically: o 21% discussed health/medical and parenting and child development issues. o 3% discussed parenting and information-seeking issues. o 5% discussed health/medical, parenting/development and information issues. o 18% exclusively focussed on health and medical issues and therefore were outside the remit of the intended scope of the CHL. These calls caused interactional dilemmas for the nurse call-takers as they simultaneously dealt with parental expectations for help and the CHL guidelines indicating that offering medical advice was outside the remit of the service. • Most frequent reasons for calling were to discuss sleep, feeding, normative infant physical functions and parenting advice. • The average length of calls to the CHL was 7 minutes. • Longer calls were more likely to involve nurse call-takers giving advice on more than one topic, the caller displaying strong emotions, the caller not specifically providing the reason for the call, and the caller discussing parenting and developmental issues. • Shorter calls were characterised by the nurse suggesting that the child receive immediate medical attention, the nurse emphasising the importance or urgency of the plan of action, the caller referring to or requesting confirmation of a diagnosis, and caller and nurse call-taker discussion of health and medical issues. • The majority of calls, 92%, achieved parent-nurse alignment by the conclusion of the call. However, 8% did not. • The 8% of calls that were not aligned require further quantitative and qualitative investigation of the interactional features. The findings are pertinent in the current context where Child Health Line now resides within 13HEALTH. These findings indicate: 1. A high demand for parenting advice. 2. Nurse call-takers have a high level of competency in dealing with calls about parenting and normal child development, which is the remit of the CHL. 3. Nurse call-takers and callers achieve a high degree of alignment when both parties agree on a course of action. 4. There is scope for developing professional practice in calls that present difficulties in terms of call content, interactional behaviour and call closure. Recommendations of the project: 1. There are numerous opportunities for further research on interactional aspects of calls to the CHL, such as further investigations of the interactional features and the association of the features to alignment and nonalignment. The rich and detailed insights into the patterns of nurse-parent interactions were afforded by the audio-recording and analysis of calls to the CHL. 2. The regular recording of calls would serve as a way of increasing understanding of the type and nature of calls received, and provide a valuable training resource. Recording and analysing calls to CHL provides insight into the operation of the service, including evidence about the effectiveness of triaging calls. 3. Training in both recognising and dealing with problem calls may be beneficial. For example, calls where the caller showed strong emotion, appeared stressed, frustrated or troubled were less likely to be rated as aligned calls. In calls where the callers described being ‘at their wits end’, or responded to each proposed suggestion with ‘I’ve tried that’, the callers were fairly resistant to advice-giving. 4. Training could focus on strategies for managing calls relating to parenting support and advice, and parental well-being. The project found that these calls were more likely to be rated as being nonaligned. 5. With the implementation of 13HEALTH, future research could compare nurse-parent interaction following the implementation of triaging. Of the calls, 21% had both medical and parenting topics discussed and 5.3% discussed medical, parenting and information topics. Added to this, in 12% of calls, there was ambiguity between the caller and nurse call-taker as to whether the problem was medical or behavioural.

Procuring OSM : base-line models of off-site manufacture business processes in Australia

A pressing cost issue facing construction is the procurement of off-site pre-manufactured assemblies. In order to encourage Australian adoption of off-site manufacture (OSM), a new approach to underlying processes is required. The advent of object oriented digital models for construction design assumes intelligent use of data. However, the construction production system relies on traditional methods and data sources and is expected to benefit from the application of well-established business process management techniques. The integration of the old and new data sources allows for the development of business process models which, by capturing typical construction processes involving OSM, provides insights into such processes. This integrative approach is the foundation of research into the use of OSM to increase construction productivity in Australia. The purpose of this study is to develop business process models capturing the procurement, resources and information flow of construction projects. For each stage of the construction value chain, a number of sub-processes are identified. Business Process Modelling Notation (BPMN), a mainstream business process modelling standard, is used to create base-line generic construction process models. These models identify OSM decision-making points that could provide cost reductions in procurement workflow and management systems. This paper reports on phase one of an on-going research aiming to develop a proto-type workflow application that can provide semi-automated support to construction processes involving OSM and assist in decision-making in the adoption of OSM thus contributing to a sustainable built environment.

Exponential asymptotics of free surface flow due to a line source

The steady problem of free surface flow due to a submerged line source is revisited for the case in which the fluid depth is finite and there is a stagnation point on the free surface directly above the source. Both the strength of the source and the fluid speed in the far field are measured by a dimensionless parameter, the Froude number. By applying techniques in exponential asymptotics, it is shown that there is a train of periodic waves on the surface of the fluid with an amplitude which is exponentially small in the limit that the Froude number vanishes. This study clarifies that periodic waves do form for flows due to a source, contrary to a suggestion by Chapman & Vanden-Broeck (2006, J. Fluid Mech., 567, 299--326). The exponentially small nature of the waves means they appear beyond all orders of the original power series expansion; this result explains why attempts at describing these flows using a finite number of terms in an algebraic power series incorrectly predict a flat free surface in the far field.

Morphology-based model for predicting osteocyte-like cell line (MLO-Y4) growth process

This work has led to the development of empirical mathematical models to quantitatively predicate the changes of morphology in osteocyte-like cell lines (MLO-Y4) in culture. MLO-Y4 cells were cultured at low density and the changes in morphology recorded over 11 hours. Cell area and three dimensional shape features including aspect ratio, circularity and solidity were then determined using widely accepted image analysis software (ImageJTM). Based on the data obtained from the imaging analysis, mathematical models were developed using the non-linear regression method. The developed mathematical models accurately predict the morphology of MLO-Y4 cells for different culture times and can, therefore, be used as a reference model for analyzing MLO-Y4 cell morphology changes within various biological/mechanical studies, as necessary.

Designing a new robust on-line secondary path modeling technique for feedforward active noise control systems

Several approaches have been introduced in the literature for active noise control (ANC) systems. Since the filtered-x least-mean-square (FxLMS) algorithm appears to be the best choice as a controller filter, researchers tend to improve performance of ANC systems by enhancing and modifying this algorithm. This paper proposes a new version of the FxLMS algorithm, as a first novelty. In many ANC applications, an on-line secondary path modeling method using white noise as a training signal is required to ensure convergence of the system. As a second novelty, this paper proposes a new approach for on-line secondary path modeling on the basis of a new variable-step-size (VSS) LMS algorithm in feed forward ANC systems. The proposed algorithm is designed so that the noise injection is stopped at the optimum point when the modeling accuracy is sufficient. In this approach, a sudden change in the secondary path during operation makes the algorithm reactivate injection of the white noise to re-adjust the secondary path estimate. Comparative simulation results shown in this paper indicate the effectiveness of the proposed approach in reducing both narrow-band and broad-band noise. In addition, the proposed ANC system is robust against sudden changes of the secondary path model.

Towards connoisseurship in educational leadership : following the data in a three stage line of inquiry

Following an epistemic frame advanced by Elliott Eisner (2002), it is argued that the tradition of the arts and perspectives from artists have the potential to yield refreshing and interesting insights for the field of educational leadership. Moreover, it is argued that Eisner’s work on tacit knowledge which he advanced as an example of connoisseurship has important implications and posits the possibility of developing a more discerning “eye” in describing the work of educational leaders. To assess these assertions, the paper reports on two stages of interviews with nine former and current artists from Australia in order to understand the processes in which they engaged when they create art and how they encountered and managed barriers. The implications of this preliminary investigation are explored in this paper as they related to how leadership is defined and the issues pertaining to claims that leadership studies must be “scientific” to have currency and credibility. The article begins by making an argument for the value of the arts to advanced a more nuanced view of leadership, considers the importance of connoisseurship as a frame for understanding it, and then explores the cognitive functions performed by the arts before turning to the study at hand.

Effect of Reynolds numbers on flow past four square cylinders in an in-line square configuration for different gap spacings

In this paper two-dimensional (2-D) numerical investigation of flow past four square cylinders in an in-line square configuration are performed using the lattice Boltzmann method. The gap spacing g=s/d is set at 1, 3 and 6 and Reynolds number ranging from Re=60 to 175. We observed four distinct wake patterns: (i) a steady wake pattern (Re=60 and g=1) (ii) a stable shielding wake pattern (80≤Re≤175 and g=1) (iii) a wiggling shielding wake pattern (60≤Re≤175 and g=3) (iv) a vortex shedding wake pattern (60≤Re≤175 and g=6) At g=1, the Reynolds number is observed to have a strong effect on the wake patterns. It is also found that at g=1, the secondary cylinder interaction frequency significantly contributes for drag and lift coefficients signal. It is found that the primary vortex shedding frequency dominates the flow and the role of secondary cylinder interaction frequency almost vanish at g=6. It is observed that the jet between the gaps strongly influenced the wake interaction for different gap spacing and Reynolds number combination. To fully understand the wake transformations the details vorticity contour visualization, power spectra of lift coefficient signal and time signal analysis of drag and lift coefficients also presented in this paper.