Synthesis, characterization and formulation of a cathode active material: Copper nitroprusside

Nowadays, rechargeable Li-ion batteries play an important role in portable consumer devices. Formulation of such batteries is improvable by researching new cathodic materials that present higher performances of cyclability and negligible efficiency loss over cycles. Goal of this work was to investigate a new cathodic material, copper nitroprusside, which presents a porous 3D framework. Synthesis was carried out by a low-cost and scalable co-precipitation method. Subsequently, the product was characterized by means of different techniques, such as TGA, XRF, CHN elemental analysis, XRD, Mössbauer spectroscopy and cyclic voltammetry. Electrochemical tests were finally performed both in coin cells and by using in situ cells: on one hand, coin cells allowed different formulations to be easily tested, on the other operando cycling led a deeper insight to insertion process and both chemical and physical changes. Results of several tests highlighted a non-reversible electrochemical behavior of the material and a rapid capacity fading over time. Moreover, operando techniques report that amorphisation occurs during the discharge.

The Great Silk Alternative Multiple Co-Evolution of Web Loss and Sticky Hairs in Spiders

Spiders are the most important terrestrial predators among arthropods. Their ecological success is reflected by a high biodiversity and the conquest of nearly every terrestrial habitat. Spiders are closely associated with silk, a material, often seen to be responsible for their great ecological success and gaining high attention in life sciences. However, it is often overlooked that more than half of all Recent spider species have abandoned web building or never developed such an adaptation. These species must have found other, more economic solutions for prey capture and retention, compensating the higher energy costs of increased locomotion activity. Here we show that hairy adhesive pads (scopulae) are closely associated with the convergent evolution of a vagrant life style, resulting in highly diversified lineages of at least, equal importance as the derived web building taxa. Previous studies often highlighted the idea that scopulae have the primary function of assisting locomotion, neglecting the fact that only the distal most pads (claw tufts) are suitable for those purposes. The former observations, that scopulae are used in prey capture, are largely overlooked. Our results suggest the scopulae evolved as a substitute for silk in controlling prey and that the claw tufts are, in most cases, a secondary development. Evolutionary trends towards specialized claw tufts and their composition from a low number of enlarged setae to a dense array of slender ones, as well as the secondary loss of those pads are discussed further. Hypotheses about the origin of the adhesive setae and their diversification throughout evolution are provided.

Major challenges in clinical management of TB/HIV co-infected patients in Eastern Europe compared with Western Europe and Latin America.

INTRODUCTION Rates of both TB/HIV co-infection and multi-drug-resistant (MDR) TB are increasing in Eastern Europe (EE). Data on the clinical management of TB/HIV co-infected patients are scarce. Our aim was to study the clinical characteristics of TB/HIV patients in Europe and Latin America (LA) at TB diagnosis, identify factors associated with MDR-TB and assess the activity of initial TB treatment regimens given the results of drug-susceptibility tests (DST). MATERIAL AND METHODS We enrolled 1413 TB/HIV patients from 62 clinics in 19 countries in EE, Western Europe (WE), Southern Europe (SE) and LA from January 2011 to December 2013. Among patients who completed DST within the first month of TB therapy, we linked initial TB treatment regimens to the DST results and calculated the distribution of patients receiving 0, 1, 2, 3 and ≥4 active drugs in each region. Risk factors for MDR-TB were identified in logistic regression models. RESULTS Significant differences were observed between EE (n=844), WE (n=152), SE (n=164) and LA (n=253) for use of combination antiretroviral therapy (cART) at TB diagnosis (17%, 40%, 44% and 35%, p<0.0001), a definite TB diagnosis (culture and/or PCR positive for Mycobacterium tuberculosis; 47%, 71%, 72% and 40%, p<0.0001) and MDR-TB prevalence (34%, 3%, 3% and 11%, p <0.0001 among those with DST results). The history of injecting drug use [adjusted OR (aOR) = 2.03, (95% CI 1.00-4.09)], prior TB treatment (aOR = 3.42, 95% CI 1.88-6.22) and living in EE (aOR = 7.19, 95% CI 3.28-15.78) were associated with MDR-TB. For 569 patients with available DST, the initial TB treatment contained ≥3 active drugs in 64% of patients in EE compared with 90-94% of patients in other regions (Figure 1a). Had the patients received initial therapy with standard therapy [Rifampicin, Isoniazid, Pyrazinamide, Ethambutol (RHZE)], the corresponding proportions would have been 64% vs. 86-97%, respectively (Figure 1b). CONCLUSIONS In EE, TB/HIV patients had poorer exposure to cART, less often a definitive TB diagnosis and more often MDR-TB compared to other parts of Europe and LA. Initial TB therapy in EE was sub-optimal, with less than two-thirds of patients receiving at least three active drugs, and improved compliance with standard RHZE treatment does not seem to be the solution. Improved management of TB/HIV patients requires routine use of DST, initial TB therapy according to prevailing resistance patterns and more widespread use of cART.

Decomposition studies of group 6 hexacarbonyl complexes. Part 1: Production and decomposition of Mo(CO)6 and W(CO)6

Chemical studies of superheavy elements require fast and efficient techniques, due to short half-lives and low production rates of the investigated nuclides. Here, we advocate for using a tubular flow reactor for assessing the thermal stability of the Sg carbonyl complex – Sg(CO)6. The experimental setup was tested with Mo and W carbonyl complexes, as their properties are established and supported by theoretical predictions. The suggested approach proved to be effective in discriminating between the thermal stabilities of Mo(CO)6 and W(CO)6. Therefore, an experimental verification of the predicted Sg–CO bond dissociation energy seems to be feasible by applying this technique. By investigating the effect of 104,105Mo beta-decay on the formation of 104,105Tc carbonyl complex, we estimated the lower reaction time limit for the metal carbonyl synthesis in the gas phase to be more than 100 ms. We examined further the influence of the wall material of the recoil chamber, the carrier gas composition, the gas flow rate, and the pressure on the production yield of 104Mo(CO)6, so that the future stability tests with Sg(CO)6 can be optimized accordingly.

In Vitro Implant Impression Accuracy Using a New Photopolymerizing SDR Splinting Material

PURPOSE The study aims to evaluate three-dimensionally (3D) the accuracy of implant impressions using a new resin splinting material, "Smart Dentin Replacement" (SDR). MATERIALS AND METHODS A titanium model of an edentulous mandible with six implant analogues was used as a master model and its dimensions measured with a coordinate measuring machine. Before the total 60 impressions were taken (open tray, screw-retained abutments, vinyl polysiloxane), they were divided in four groups: A (test): copings pick-up splinted with dental floss and fotopolymerizing SDR; B (test): see A, additionally sectioned and splinted again with SDR; C (control): copings pick-up splinted with dental floss and autopolymerizing Duralay® (Reliance Dental Mfg. Co., Alsip, IL, USA) acrylic resin; and D (control): see C, additionally sectioned and splinted again with Duralay. The impressions were measured directly with an optomechanical coordinate measuring machine and analyzed with a computer-aided design (CAD) geometric modeling software. The Wilcoxon matched-pair signed-rank test was used to compare groups. RESULTS While there was no difference (p = .430) between the mean 3D deviations of the test groups A (17.5 μm) and B (17.4 μm), they both showed statistically significant differences (p < .003) compared with both control groups (C 25.0 μm, D 19.1 μm). CONCLUSIONS Conventional impression techniques for edentulous jaws with multiple implants are highly accurate using the new fotopolymerizing splinting material SDR. Sectioning and rejoining of the SDR splinting had no impact on the impression accuracy.

Composition of sedimentary material from the bottom and the area surrounding the Lake Untersee, East Antarctica

This paper presents data on geographic and geologic conditions of modern sedimentation in the Lake Untersee, the largest lake in the East Antarctica. Geochemical and sedimentation data indicate that the leading mechanism supplying aluminosilicate sedimentary material to the surface layer of bottom sediments is seasonal melting of the Anuchin glacier and the mountain glacier on the southeastern part of the valley hosting the lake. Strongly reduced conditions in the lowermost 25 m of the water column in the smaller of two depressions of the lake bottom were favorable for enrichment of the bottom sediments in bacteriogenic organic matter, Mo, Au, and Pd. H2S-contaminated water results to significant enrichment of the sediments only in redox-sensitive elements that are able to migrate in anionic complexes and precipitate (co-precipitate) as sulfides.

Utilización de material rocoso de desecho minero y enmiendas en la elaboración de sustratos edáficos para revegetar terrenos alterados

Los terrenos intervenidos por compañías mineras resultan alterados en mayor o menor grado según las actividades propias de cada una de ellas. Esta investigación hace referencia a la minera Alumbrera Ltda., que extrae el yacimiento de cobre, oro y molibdeno Bajo de la Alumbrera ubicado al noroeste de la Provincia de Catamarca. Este tipo de actividades genera grandes volúmenes de desechos de materiales rocosos extraídos de los “open pits", muchos de los cuáles pueden constituir sustratos adecuados para la revegetación de los sitios alterados por las mismas. Frente a los costos elevados de traer suelos desde sitios alejados para su uso en revegetación con especies de zonas áridas en sitios alterados por la actividad minera, se plantea el uso de los materiales rocosos inertes de desecho minero denominado Barren Core (BC) y Epidoto Clorita (ECl). Se investigan las causas del mayor éxito del ECI respecto a BC, en el establecimiento y crecimiento de las plantas, a partir del estudio de algunas propiedades hídricas (retención de agua e infiltración) y la obtención de un sustrato edáfico a partir de dichos materiales, Lombricompuesto (L) y suelo Aluvial (SAI)

Metodología para la detección de Agrobacterium vitis a partir de material vegetal de Vitis vinífera

En nuestro país no está desarrollada una técnica sensible y precisa que permita confirmar la presencia de la bacteria Agrobacterium vitis; por lo tanto es muy importante contar con herramientas analíticas que permitan identificar la bacteria en vides y/o suelos para controlar la diseminación y propagación de la misma, permitiendo así a las empresas, mejorar la competitividad de sus productos en el mercado y garantizar la seguridad y calidad de la materia prima principal de la industria vitivinícola. El objetivo de este estudio es poner a punto una metodología de detección de Agrobacterium vitis sensible y de bajo costo basada en la técnica de PCR (Reacción en cadena de la polimerasa). El desarrollo de esta metodología pretende ser una herramienta importante para la industria vitivinícola al permitir detectar la presencia o ausencia de la bacteria en programas de monitoreo, tomar decisiones a tiempo y así proteger la calidad y sanidad de las vides. En el presente trabajo se empleó la metodología propuesta por Eastwell y colaboradores en 1995. La misma consistió en el aislamiento de la bacteria en medio selectivo RS, en la extracción/purificación de ADN bacteriano, amplificación por PCR, separación del producto amplificado por electroforesis y revelado por tinción, pudiéndose observar que el 100% del material con sintomatología que se utilizó presentó desarrollo de colonias características de Agrobacterium vitis. Al hacer la amplificación de los ADN y posterior revelado se observó, en primera instancia, que la amplificación no fue óptima, pero cuando se realizaron las distintas adaptaciones de la técnica se vieron diferentes resultados encontrándose que podría tratarse de: A. vitis virulento, no virulento o A. tumefaciens. Para ello fue necesario adecuar la técnica y estudiar algunos aspectos tales como las temperaturas de incubación de los medios de cultivos, evaluación de la concentración de ADN para determinar si existía una concentración mínima del mismo para su posterior amplificación. También se trabajó con diferentes concentraciones del gel de agarosa y se modificaron los volúmenes de siembra y los tiempos de corrida del gel en la cuba de electroforesis. Fue posible adaptar la metodología para la identificación de cepas de Agrobacterium vitis. Los mejores resultados se evidenciaron trabajando con una temperatura de incubación de las colonias de 28 °C, con una concentración del gel de agarosa del 2 % tal como lo indicaba la técnica original, volúmenes de siembra de electroforesis de 10 μl de PCR producto y un tiempo de corrida del gel en la cuba de electroforesis de 70 min a 90 Voltios. Además observamos que concentraciones de ADN superiores a 49 ng/μl registraron bandas visibles siendo las de 116 ng/μl o superiores las concentraciones más adecuadas y optimas para la obtención de bandas bien definidas y nítidas.

Investigations on sediments from Lake Nam Co (Tibetan Plateau)

This study focuses on the analysis of lake sediments retrieved from the deepest part of Lake Nam Co (Tibetan Plateau). One gravity core of 115 cm length, covering the last ~ 4000 cal BP, was analyzed for geochemical and biological parameters. High organic content at ~ 4000 cal BP and the coinciding presence of pyrite framboids until ~ 2000 cal BP point to hampered decomposition of organic material due to anoxic conditions within the lake sediments. At the same time sedimentological and biological proxies suggest a rather high lake level, but still ~ 5 m below the recent one, with less saline lake water due to enhanced monsoonal activity. During this time a change in the source of organic matter to lowered input of terrestrial components is observed. A rather quick shift to a dry environment with less monsoonal influence and a lake level ~ 15 m lower than today at ~ 2000 cal BP lead to the oxygenation of sediment, the degradation of organic matter and the absence of pyrite. Oscillations of the lake level thereafter were of minor amplitude and not able to establish anoxia at the lake bottom again. A wet spell between ~ 1500 cal BP and ~ 1150 cal BP is visible in proxies referring to catchment hydrology and the ostracod-based water depth transfer function gives only a slightly elevated lake level. The last ~ 300 years are characterized by low TOC and rising TN values reflecting enhanced nutrient supply and hence an advancing influence of human activity in the catchment. Decreasing TOC/TN values point to a complete shift to almost solely aquatic biomass production. These results show that hydrological variations in terms of lake level change based on monsoonal strength can be linked to redox conditions at the lake bottom of Nam Co. Comparison with other archives over larger parts of the Tibetan Plateau and beyond exhibits a rather homogeneous climatic pattern throughout the late Holocene.

Composition of dissolved, particulate and sinking material in hydrothermal plumes above the TAG and Broken Spur hydrothermal fields

The paper reports data on distribution of dissolved (Mn, Zn, Cu, Pb, and Cd) and particulate (Fe, Mn, Zn, Cu, Pb, Ni, and Co) species of metals in hydrothermal plumes above the active TAG and Broken Spur hydrothermal fields (26° N and 29° N in the MAR rift valley, respectively). Sediment trap data on fluxes of hydrothermal sedimentary material in the areas indicate that (i) the predominant Zn source for metalliferous sediments at the TAG field is material precipitating from the neutrally buoyant plume, and (ii) the predominant source of Fe and Co is re-deposited ore material coming from the area of extensive settling of sulfides.

Composition of sediments, hydrothermal manifestations, interstitial waters, and aeolian material from the TAG Hydrothermal Field and Central Atlantic

The book is devoted to regularities of spatial distribution, mineralogy and geochemistry of hydrothermal and hydrothermal-sedimentary manifestations of the Mid-Atlantic Ridge rift zone.

Accumulation and composition of terrigenous material on Ceara rise over the past 55 Ma

Ceara Rise, located east the Amazon River mouth, is covered with a thick blanket of pelagic carbonate and hemipelagic terrigenous sediment. The terrigenous component has been extracted from 57 bulk sediment samples at Ocean Drilling Program (ODP) Sites 925 and 929 on Ceara Rise to obtain a Cenozoic record of riverine discharge from northern South America. From the early Eocene to early Miocene (55-20 Ma), terrigenous accumulation was dominated by moderate amounts of generally large-grained, gray to green sediment especially depleted in elements that are enriched in post-Archaean shale (e.g. Cs, Th, Yb). However, pulsed inputs of relatively small-grained, gray to green terrigenous sediment less depleted in the above elements occurred in the late Eocene and Oligocene. The accumulation of terrigenous sediment decreased significantly until 16.5 Ma. In the middle Miocene (16.5-13 Ma), terrigenous accumulation was dominated by small amounts of small-grained, tan sediment notably depleted in Na and heavy rare earth elements. The accumulation rate of terrigenous sediment increased markedly from the latest Miocene (10 Ma) to the present day, a change characterized by deposition of gray-green sediment enriched in elements that are enriched in post-Archaean shale. Observed changes in terrigenous sediment at Ceara Rise record tectonism and erosion in northern South America. The Brazil and Guyana shields supplied sediment to the eastern South American margin until the middle Miocene (20-16.5 Ma) when a period of thrusting, shortening and uplift changed the source region, probably first to highly weathered and proximal Phanerozoic sediments. By the late Miocene (9 Ma), there was a transcontinental connection between the Andes and eastern South America. Weathering products derived from the Andes have increasingly dominated terrigenous deposition at Ceara Rise since the Late Miocene and especially since the late Pliocene.

Dissolution and gettering of iron during contact co-firing

The dissolution and gettering of iron is studied during the final fabrication step of multicrystalline silicon solar cells, the co-firing step, through simulations and experiments. The post-processed interstitial iron concentration is simulated according to the as-grown concentration and distribution of iron within a silicon wafer, both in the presence and absence of the phosphorus emitter, and applying different time-temperature profiles for the firing step. The competing effects of dissolution and gettering during the short annealing process are found to be strongly dependant on the as-grown material quality. Furthermore, increasing the temperature of the firing process leads to a higher dissolution of iron, hardly compensated by the higher diffusivity of impurities. A new defect engineering tool is introduced, the extended co-firing, which could allow an enhanced gettering effect within a small additional time

Defect engineering during the contact co-firing step in an industrial belt furnace

This work implements an optimization of the phosphorus gettering effect during the contact co-firing step by means of both simulations and experiments in an industrial belt furnace. An optimized temperature profile, named ‘extended co-firing step’, is presented. Simulations show that the effect of the short annealing on the final interstitial iron concentration depends strongly on the initial contamination level of the material and that the ‘extended co-firing’ temperature profile can enhance the gettering effect within a small additional time. Experimental results using sister wafers from the same multicrystalline silicon ingot confirm these trends and show the potential of this new defect engineering tool to improve the solar cell efficiency.