940 resultados para Initial stages
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Objective and design: To determine the expression pattern and distribution of the glucocorticoid-inducible protein annexin 1 (ANXA1) in a murine model of chronic granulomatous inflammation.Materials or subjects: TO Mouse.Treatment: Chronic granulomatous inflammation was induced by injecting into dorsal sub-cutaneous air-pouches in mice, a mixture of croton oil and Freund's complete adjuvant (CO/FCA).Methods: Western and northern analysis, corticosterone assay, and immunohistochemistry. Statistical analysis was performed using ANOVA followed by Tukey's pair-wise comparisons or Dunnett's multiple comparisons.Results: ANXA1 protein levels changed significantly throughout the 4-week time course, with an initial peak at day 7 and a later elevation at 28 days. ANXA1 mRNA levels peaked at days 1 and 3, with a significant decline at day 7 followed by an upward trend to day 28. Plasma corticosterone measurements taken throughout the time course revealed an increase from 14 days onward, suggesting that corticosterone does not influence ANXA1 expression during the initial stages of the model. Immunogold staining revealed that ANXA1 expression in the inflamed tissue was mainly in extravasated neutrophils, with intact protein (37 kDa) being predominantly observed on the cell membrane.Conclusions: the pattern of ANXA1 expression indicates that infiltrated neutrophils are responsible for the majority of ANXA1 present both at early and later stages of this model of granulomatous inflammation.
Resumo:
Embryological studies indicate Eupatorium laevigatum to have Antennaria type diplospory with precocious embryony. The embryo sac is of the Polygonum type and the polar nuclei fuse before anthesis (maturation of the stamens). Endosperm development is autonomous and the central cell divides only after the initial stages of embryo formation. It is estimated that about 10% of the florets in anthesis contain an undivided egg which can be used for sexual reproduction. The study of microsporogenesis revealed abnormalities in chromosome pairing which result in the formation of univalents, bivalents, trivalents and higher polyvalents, with the consequent production of lagging chromosomes, unbalanced nuclei, micronuclei and sterile pollen. We found that, as represented by the material studied, E. laevigatum is an autohexaploid (2n = 6x = 60) in which each chromosome of a basic set of ten chromosomes is repeated six times and that E. laevigatum is an essentialy obligate apomictic.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
A influência de acibenzolar-S-methyl (ASM), e fungicidas aplicados via tratamento de sementes sobre a ferrugem asiática bem como o crescimento de plântulas de soja foi avaliada em experimento conduzido em casa de vegetação em delineamento inteiramente casualizado com três repetições, utilizando as cultivares de soja 'Agiara', 'M-soy 8000' e 'M-soy 8080'. Os tratamentos foram três doses de ASM (0,05; 0,1 e 0,2 g de i.a. por kg de sementes), ASM (na dose de 0,1 g de i.a. por kg de sementes) combinado aos fungicidas flutriafol, pyraclostrobin e azoxystrobin, e a aplicação isolada destes, além de uma testemunha tratada com água. Os resultados mostraram redução da Área Abaixo da Curva de Progresso da Ferrugem (AACPF) com o aumento da dose de ASM nas três cultivares de soja. A utilização isolada do ASM em diferentes doses proporcionou uma redução da AACPF além de apresentar, na maioria dos casos, um efeito sinérgico com os fungicidas, aumentando a eficiência de controle quando comparada às aplicações isoladas. Com exceção do ASM na menor dosagem, todos os tratamentos apresentaram controle superior a 77 % comparados à testemunha. em geral, o tratamento de sementes com ASM e fungicidas resultou numa redução da massa seca (MS) em relação à testemunha. A utilização de ASM associado a fungicidas na tentativa de atrasar a infecção da ferrugem asiática da soja nos períodos iniciais da cultura constitui-se em uma alternativa viável para redução do inóculo inicial, entretanto possíveis efeitos fitotóxicos devem ser considerados.
Resumo:
Avaliou-se o efeito do diâmetro e da fase do desenvolvimento folicular sobre a competência de oócitos para a produção in vitro de embriões bovinos. A primeira onda folicular foi sincronizada com progestógeno por nove dias e 24 horas após a sua retirada aplicou-se LH. Os ovários foram recuperados 60h (G-60), 96h (G-96) e 108h (G-108) após a ovulação induzida pelo LH. Os folículos foram dissecados ou aspirados e medidos e os oócitos recuperados e submetidos à maturação, fecundação e cultivo in vitro. Os ovários do G-60 apresentaram mais oócitos viáveis (graus I, II e III) (96,6%). A taxa de clivagem teve efeito significativo sobre o diâmetro folicular, sendo maior nos oócitos oriundos de folículos classe 3 (>7mm). Na taxa de produção de blastocisto observou-se interação diâmetro versus fase de desenvolvimento folicular. A taxa de produção de blastocisto foi maior em oócitos obtidos de folículos com diâmetros <5mm (classe 1) no G-60 (64,5%), de 5-7mm (classe 2) no G-96 (33,3%) e >7mm (classe 3) no G-108 (50%). Conclui-se que o diâmetro e a fase de desenvolvimento folicular influenciam a competência oocitária para o desenvolvimento in vitro. Nos estádios iniciais da onda folicular a produção de blastocisto foi maior em oócitos de folículos pequenos; com o avanço da onda, a produção de blastocistos foi maior em oócitos obtidos de folículos maiores.
Resumo:
Polyaniline (PAni) thin films were deposited onto BK7 glass substrates using the in situ deposition technique. The control of the time and the aniline concentration in the PAni polymerization reaction on the film deposition allowed us to prepare films with different thickness, down to similar to 25 nm. The film growth process was monitored by measuring the UV-vis spectra and the AFM height profiles of the film surface. The curves of adsorption kinetics were analyzed with the Avrami's model, yielding an exponent it n = 3, thus indicating nucleation of spheroids at the initial stages of polymerization that grow through a diffusion process. AFM images of the surface height profiles corroborate this hypothesis, with spheroids growing with no preferred orientation during the in situ deposition. (C) 2007 Elsevier B.V. All rights reserved.
Resumo:
Composite Langmuir-Blodgett (LB) films from polyaniline and cadmium stearate have been irradiated with ionizing X-rays for various exposure times. In the initial stages of X-ray irradiation the absorption peak at 580 nm of an as-deposited film was seen to decrease with a concomitant increase in the absorption in the long wavelength region (700-1100 nm). Upon prolonging the irradiation, the absorption maximum shifted to 800 nm with the LB film color changing to green, characteristic of acid doped polyaniline. The changes in the Fourier transform infrared (FTIR) spectra upon irradiation are also similar to those observed upon acid doping of polyaniline. When compared with acid doping, two major differences were observed for the LB films exposed to X-rays. First, the packing order of the cadmium stearate domains in the composite LB films - as observed by X-ray diffraction - is not affected by the X-ray irradiation. In addition, no significant increase in the DC conductivity was noted after the X-ray exposure whereas similar LB films have their conductivity increased by an order of magnitude upon acid doping. These differences may be explained by considering that the inter-domain contribution to the conductivity is increased by the acid doping because the insulating cadmium stearate domains are destroyed, which does not occur with the X-ray irradiation. (C) 1998 Elsevier B.V. S.A. All rights reserved.
Resumo:
Guazuma ulmifolia is as popular reforestation tree all over Latin America. It is characteristic of the initial stages of the secondary sucession and presents potential utility in the restoring of degraded areas. There is no information about fruit,seed and seedling morphology, which is of fundamental importance for identification, extraction, management and seed germination as well as for the characterization of post-seminal development and normal seedling pattern. To obtain such information, external fruit, and external and internal seed structures were studied considering shape, size, micropile and embryo localization; and tegumentar structures. All stages of this work were conduced in the Universidade Estadual Paulista (UNESP), Campus of Jaboticabal city. The fruits were collected in a mixed plantation in Jaboticabal city, State of São Paulo, Brazil. For the bio metric study eight repetitions of ten fruits and eight repetitions of 100 seeds were utilized. For seed internal traits study, 50 seeds were drenched in a distiled water, cut, and observed with a scanning electron microscope and a stereomicroscope, For post-seminal study ten repetitions of seven seeds were scarificated chemically with sulphuric acid during 50 min, and placed to germinate ina culture medium, at 30 degrees C, and eight hours of photoperiod. We found elipsoid, woody, indehiscent, pentacarpelar fruits, with a mean lenght of 22.61 mm (diameter 24.88 mm) and 64.0 seeds per fruit. Seed shape varies, mean length is 3.07 mm (width of 2.36 mm). The seed is bitegumented, tegmic, with a continuous, axial and curved embryo. The germination is epigeal and the seedlings are fanerocotiledoneus. Drawings of all stages are included.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Guazuma ulmifolia is as popular reforestation tree all over Latin America. It is characteristic of the initial stages of the secondary sucession and presents potential utility in the restoring of degraded areas. There is no information about fruit, seed and seedling morphology, which is of fundamental importance for identification, extraction, management and seed germination as well as for the characterization of post-seminal development and normal seedling pattern. To obtain such information, external fruit, and external and internal seed structures were studied considenng shape, size, micropile and embryo localization, and tegumentar structures. All stages of this work were conduced in the Universidade Estadual Paulista (UNESP), Campus of Jaboticabal city. The fruits were collected in a mixed plantation in Jaboticabal city, State of São Paulo, Brazil. For the biometric study eight repetitions of ten fruits and eight repetitions of 100 seeds were utilized. For seed internal traits study, 50 seeds were drenched in a distiled water, cut, and observed with a scanning electron microscope and a stereomicroscope. For post-seminal study ten repetitions of seven seeds were scarificated chemically with sulphuric acid during 50 min, and placed to germinate in a culture medium, at 30°C, and eight hours of photoperiod. We found elipsoid, woody, indehiscent, pentacarpelar fruits, with a mean lenght of 22.61 mm (diameter 24.88 mm) and 64.0 seeds per fruit. Seed shape varies, mean length is 3.07 mm (width of 2.36 mm).The seed is bitegumented, tegmic, with a continuous, axial and curved embryo. The germination is epigeal and the seedlings are fanerocotiledoneus. Drawings of all stages are included.
Resumo:
The mechanism of formation and growth of hydrous iron oxide (FeOOH) during the initial stages of forced hydrolyses of ferric chloride aqueous solution was studied by small angle X-ray scattering (SAXS). The effect of the hydrolysis temperature (60°C, 70°C and 80°C) and of the addition of urea on the formation of colloidal particles under isothermal conditions were investigated. Based on the experimental scattering functions in the Guinier range, we suggest the presence of elongated colloidal particles. The particle diameter and length, and their variation with time, were determined by fitting the form factor of prolate ellipsoids to the experimental scattering functions. We have assumed that our solutions are in a dilute state and that all colloidal particles are approximately of the same size. The colloidal particles have geometrical shapes similar to those of the subcrystals that build up the superstructure of β-FeOOH crystals, indicating that the formation of this hydrous iron oxide is governed by an aggregation process. Otherwise, the addition of urea hinders the growth and yields smaller particles, with a reduction in size greater than 50%. © 2000 Elsevier Science B.V. All rights reserved.
Resumo:
Interactive visual representations complement traditional statistical and machine learning techniques for data analysis, allowing users to play a more active role in a knowledge discovery process and making the whole process more understandable. Though visual representations are applicable to several stages of the knowledge discovery process, a common use of visualization is in the initial stages to explore and organize a sometimes unknown and complex data set. In this context, the integrated and coordinated - that is, user actions should be capable of affecting multiple visualizations when desired - use of multiple graphical representations allows data to be observed from several perspectives and offers richer information than isolated representations. In this paper we propose an underlying model for an extensible and adaptable environment that allows independently developed visualization components to be gradually integrated into a user configured knowledge discovery application. Because a major requirement when using multiple visual techniques is the ability to link amongst them, so that user actions executed on a representation propagate to others if desired, the model also allows runtime configuration of coordinated user actions over different visual representations. We illustrate how this environment is being used to assist data exploration and organization in a climate classification problem.