New recycling approaches for thermoset polymeric composite wastes – an experimental study on polyester based concrete materials filled with fibre reinforced plastic recyclates

In this study, a new waste management solution for thermoset glass fibre reinforced polymer (GFRP) based products was assessed. Mechanical recycling approach, with reduction of GFRP waste to powdered and fibrous materials was applied, and the prospective added-value of obtained recyclates was experimentally investigated as raw material for polyester based mortars. Different GFRP waste admixed mortar formulations were analyzed varying the content, between 4% up to 12% in weight, of GFRP powder and fibre mix waste. The effect of incorporation of a silane coupling agent was also assessed. Design of experiments and data treatment was accomplished through implementation of full factorial design and analysis of variance ANOVA. Added value of potential recycling solution was assessed by means of flexural and compressive loading capacity of GFRP waste admixed mortars with regard to unmodified polymer mortars. The key findings of this study showed a viable technological option for improving the quality of polyester based mortars and highlight a potential cost-effective waste management solution for thermoset composite materials in the production of sustainable concrete-polymer based products.

Hybrid thermoset polymeric composites – an Innovation towards sustainability

In this study, a new waste management solution for thermoset glass fibre reinforced polymer (GFRP) based products was assessed. Mechanical recycling approach, with reduction of GFRP waste to powdered and fibrous materials was applied, and the prospective added-value of obtained recyclates was experimentally investigated as raw material for polyester based mortars. Different GFRP waste admixed mortar formulations were analyzed varying the content, between 4% up to 12% in weight, of GFRP powder and fibre mix waste. The effect of incorporation of a silane coupling agent was also assessed. Design of experiments and data treatment was accomplished through implementation of full factorial design and analysis of variance ANOVA. Added value of potential recycling solution was assessed by means of flexural and compressive loading capacity of GFRP waste admixed mortars with regard to unmodified polymer mortars. The key findings of this study showed a viable technological option for improving the quality of polyester based mortars and highlight a potential cost-effective waste management solution for thermoset composite materials in the production of sustainable concrete-polymer based products.

New end-use application for GFRP recyclates as reinforcement for concrete-polymer materials’

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remolded, and complex composition of the composite itself, which includes glass fibres, matrix and different types of inorganic fillers. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. There are several methods to recycle GFR thermostable materials: (a) incineration, with partial energy recovery due to the heat generated during organic part combustion; (b) thermal and/or chemical recycling, such as solvolysis, pyrolisis and similar thermal decomposition processes, with glass fibre recovering; and (c) mechanical recycling or size reduction, in which the material is subjected to a milling process in order to obtain a specific grain size that makes the material suitable as reinforcement in new formulations. This last method has important advantages over the previous ones: there is no atmospheric pollution by gas emission, a much simpler equipment is required as compared with ovens necessary for thermal recycling processes, and does not require the use of chemical solvents with subsequent environmental impacts. In this study the effect of incorporation of recycled GFRP waste materials, obtained by means of milling processes, on mechanical behavior of polyester polymer mortars was assessed. For this purpose, different contents of recycled GFRP waste materials, with distinct size gradings, were incorporated into polyester polymer mortars as sand aggregates and filler replacements. The effect of GFRP waste treatment with silane coupling agent was also assessed. Design of experiments and data treatment were accomplish by means of factorial design and analysis of variance ANOVA. The use of factorial experiment design, instead of the one-factor-at-a-time method is efficient at allowing the evaluation of the effects and possible interactions of the different material factors involved. Experimental results were promising toward the recyclability of GFRP waste materials as aggregates and filler replacements for polymer mortar, with significant gain of mechanical properties with regard to non-modified polymer mortars.

Recycling of pultrusion production waste into innovative concrete-polymer composite solutions

In this study, the added value resultant from the incorporation of pultrusion production waste into polymer based concretes was assessed. For this purpose, different types of thermoset composite scrap material, proceeding from GFRP pultrusion manufacturing process, were mechanical shredded and milled into a fibrous-powdered material. Resultant GFRP recyclates, with two different size gradings, were added to polyester based mortars as fine aggregate and filler replacements, at various load contents between 4% up to 12% in weight of total mass. Flexural and compressive loading capacities were evaluated and found better than those of unmodified polymer mortars. Obtained results highlight the high potential of recycled GFRP pultrusion waste materials as efficient and sustainable admixtures for concrete and mortar-polymer composites, constituting an emergent waste management solution.

Experimental study on polyester based concretes filled with glass fibre reinforced plastic recyclates – a contribution to composite materials sustainability

The development and applications of thermoset polymeric composites, namely fibre reinforced plastics (FRP), have shifted in the last decades more and more into the mass market [1]. Despite of all advantages associated to FRP based products, the increasing production and consume also lead to an increasing amount of FRP wastes, either end-of-lifecycle products, or scrap and by-products generated by the manufacturing process itself. Whereas thermoplastic FRPs can be easily recycled, by remelting and remoulding, recyclability of thermosetting FRPs constitutes a more difficult task due to cross-linked nature of resin matrix. To date, most of the thermoset based FRP waste is being incinerated or landfilled, leading to negative environmental impacts and supplementary added costs to FRP producers and suppliers. This actual framework is putting increasing pressure on the industry to address the options available for FRP waste management, being an important driver for applied research undertaken cost efficient recycling methods. [1-2]. In spite of this, research on recycling solutions for thermoset composites is still at an elementary stage. Thermal and/or chemical recycling processes, with partial fibre recovering, have been investigated mostly for carbon fibre reinforced plastics (CFRP) due to inherent value of carbon fibre reinforcement; whereas for glass fibre reinforced plastics (GFRP), mechanical recycling, by means of milling and grinding processes, has been considered a more viable recycling method [1-2]. Though, at the moment, few solutions in the reuse of mechanically-recycled GFRP composites into valueadded products are being explored. Aiming filling this gap, in this study, a new waste management solution for thermoset GFRP based products was assessed. The mechanical recycling approach, with reduction of GFRP waste to powdered and fibrous materials was applied, and the potential added value of obtained recyclates was experimentally investigated as raw material for polyester based mortars. The use of a cementless concrete as host material for GFRP recyclates, instead of a conventional Portland cement based concrete, presents an important asset in avoiding the eventual incompatibility problems arisen from alkalis silica reaction between glass fibres and cementious binder matrix. Additionally, due to hermetic nature of resin binder, polymer based concretes present greater ability for incorporating recycled waste products [3]. Under this scope, different GFRP waste admixed polymer mortar (PM) formulations were analyzed varying the size grading and content of GFRP powder and fibre mix waste. Added value of potential recycling solution was assessed by means of flexural and compressive loading capacities of modified mortars with regard to waste-free polymer mortars.

ECO: argamassas de cal hidráulica para reabilitação de edifícios

Dissertação de Natureza Científica para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Edificações

Resistência ao fogo de alvenarias sem função estrutural

Um incêndio é algo difícil de prever, assim como a sua consequência nos elementos de construção. Dessa forma, ao longo das últimas décadas, os elementos de construção têm sido alvo de diversos estudos a fim de avaliar os seus comportamentos quando solicitados em situação de incêndio. O International Building Code (IBC) descreve um método de cálculo analítico para a determinação da resistência ao fogo dos elementos da construção de acordo com os procedimentos de teste estabelecidos na ASTM E119 (Standard Test Methods for Fire Tests of Building Construction and Materials). Nesta dissertação foi feita uma análise desse método, que se mostrou inadequado para estimar a resistência ao fogo das alvenarias, sem função estrutural, de blocos cerâmicos e blocos de betão, uma vez que despreza qualquer efeito do ar no interior das mesmas. No seguimento desta análise, é apresentado um desenvolvimento do método descrito tendo em conta o efeito do ar. Depois de uma análise aos vários tipos de blocos cerâmicos e de betão com diferentes dimensões e geometrias foi possível obter uma relação entre a espessura equivalente de ar existente num bloco e a sua respectiva resistência ao fogo, de modo a serem obtidos os valores descritos na normalização existente. O efeito do ar mostrou ter uma maior influência na resistência ao fogo nas alvenarias constituídas por blocos cerâmicos de furação vertical, já que a sua geometria caracterizada por um elevado número de pequenos alvéolos contribui para o aumento do isolamento térmico, e consequentemente da sua resistência ao fogo. Nas alvenarias rebocadas os valores da resistência ao fogo aumentam cerca de 50%, quando revestidos com argamassa de cimento, e 70% quando revestidos com gesso, logo, o emprego de revestimentos representam uma boa alternativa para aumentar a resistência ao fogo.

Estudo de Argamassas com Cinza de Casca de Amêndoa

Perante o elevado consumo de materiais naturais no processo e produtos na área da construção civil, o reaproveitamento de resíduos é uma das soluções a ser estudada. As cinzas agroindustriais têm lugar de destaque entre estes resíduos, pois têm a possibilidade de aplicação em materiais cimentícios, reduzindo assim o consumo de cimento de Portland. O presente estudo debruça-se sobre a substituição parcial (1,5% e 5%) de cimento de Portland por cinzas de casca de amêndoa. Realizaram-se provetes com diferentes tipos de argamassas: (i) uma de controlo sem substituição de cimento (ARF); (ii) uma com 1,5% de substituição parcial de cimento por cinzas de casca de amêndoa (CCA 1,5%); (iii) e uma com 5% de substituição parcial de cimento por cinza de casca de amêndoa (CCA 5%). Executaram-se ensaios para resistências mecânicas aos 3, 7, 14, 28 e 41 dias de idade. A nível químico pode-se concluir que esta cinza de casca de amêndoa não apresentou qualquer potencial pozolânico. A trabalhabilidade na generalidade diminui ligeiramente, contendo cinza de casca de amêndoa, mas ainda assim considerando-se de fácil manuseamento. Em relação às resistências mecânicas, pode-se concluir que o ideal é a substituição parcial de cimento com 1,5%, pois as resistências diminuem com o uso de uma maior percentagem de substituição, ou seja, o ideal é substituir em pequenas percentagens. Com os dados obtidos, conclui-se que as cinzas testadas não apresentam características necessárias para serem consideradas pozolanas e se será viável a sua utilização mesmo como filer.

Development of biocolonization resistant mortars: preliminary results

Restoration of Buildings and Monuments, vol. 13, nº 6 (2007), p.389-400

Evaluation of salt resistant mortars

Restoration of Buildings and Monuments, vol.11, nº 2 (2005), p.105-110

Electrodialytic remediation of two types of air pollution control residues and their applicability in construction materials

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente Perfil de Engenharia de Sistemas Ambientais

Proposal for Construction of Brock’s Monument, Queenston, newspaper fragment, 1824

Brock’s Monument is owned by Parks Canada and maintained by the Niagara Parks Commission in collaboration with the Friends of Fort George and Niagara National Historic Sites. It is located in Queenston Heights Park atop the Niagara Escarpment. On March 14, 1815, Parliament passed an act to erect a monument to the memory of General Isaac Brock. A design by engineer Francis Hall was selected. He envisioned a 135 ft. tall Tuscan column, made out of stone with a winding staircase inside. By the spring of 1824, work had begun on the monument. In June of that year, the cornerstone was laid and William Lyon Mackenzie was in attendance at the ceremony. It was on October 13th, 1824 (the anniversary of Brock’s death) that 6000 people traveled to Queenston to inter the remains of Brock and Lieutenant-Colonel Macdonell. This was the second burial for both. After 3 years the tower had reached 135 feet, but there was no inscription at the base, the fence around the observation deck had not been installed and there was no statue of Brock. Hall submitted a plan to finish the statue, but he was turned down and a simple ornament was placed where the Brock statue should have been. A massive blast of gunpowder destroyed the monument in 1840. It is alleged that an American sympathizer with the Upper Canada Rebellion set off the blast. Brock and Macdonell’s bodies were reburied in the Hamilton Family Cemetery in Queenston. The present monument was rebuilt in 1853. William Thomas (designer of St. Michael’s Cathedral in Toronto) was the architect. Brock and Macdonell were once again laid to rest in separate vaults at the statue. In 1968, Brock’s Monument was declared a national historical site. In 2005, it was closed to the public due to safety concerns, but it reopened in 2010. Source: http://www.thecanadianencyclopedia.com/articles/brocks-monument-queenston-heights

Receipt from Tom Hibbard

Receipt from Tom Hibbard regarding payment for mortar and brick work, July 4, 1876.

Les récits d’histoire littéraire québécoise des cégépiens : des récits sans intrigue

Quel est le récit d’histoire littéraire québécoise que les étudiants retiennent à la fin de leur parcours collégial? Nous nous sommes intéressé à cette question. Par le biais d’un questionnaire, nous avons interrogé plus de 300 étudiants qui étaient à la fin de leurs études collégiales. Les réponses à ce questionnaire nous ont permis de tracer une ébauche du récit d’histoire littéraire québécoise, de mieux comprendre l’enseignement que les étudiants ont reçu et d’analyser ce récit. La première constatation que nous avons faite est que nous étions en présence d’une multitude de récits. En effet, il n’y a pas deux récits pareils et il y a une grande dispersion des résultats. Ensuite, ce qui a retenu le plus notre attention est l’absence de mise en intrigue. Les étudiants utilisent plusieurs éléments pour faire l’histoire de la littérature québécoise. Les plus importants sont : la Nouvelle-France, la littérature orale, le 19e siècle, le terroir, l’anti-terroir, le roman de la ville, les années 1960, la littérature migrante et la postmodernité. Mais il n’y a pas d’articulation entre ces éléments. Ils sont tous traités de façon autonome; nous avons l’impression d’être en présence d’un mur de briques sans mortier. L’absence de certains éléments semble expliquer la forme du récit : les étudiants font une histoire qui utilise seulement les courants, il y a une absence d’événements tant littéraires qu’historiques. Ils ne font pas de liens avec les autres littératures. Bref, les éléments pouvant servir à articuler un récit sont évincés. Il est donc difficile de considérer le récit des étudiants comme une histoire littéraire.

Credibility on the Web

"La nature flexible et interactive d’Internet implique que de plus en plus de consommateurs l’utilisent en tant qu’outil d’information sur tous les sujets imaginables, qu’il s’agisse de trouver la meilleurs aubaine sur un billet d’avion, ou de se renseigner sur certains problèmes liés à leur santé. Cependant, une grande quantité de l’information disponible en ligne n’est pas impartiale. Certains sites web ne présentent qu’une vision des choses ou font la promotion des produits d’une seule entreprise. Les consommateurs sont plus habitués à évaluer le poid à attribuer à certains conseils ou autres formes d’informations dans un contexte différent. Une telle évaluation de la crédibilité d’une information devient plus difficile dans le monde virtuel où les indices du monde réel, de l’écrit ou de l’interaction face-à-face sont absents. Consumers International a développé une définition de la notion de « crédibilité de l’information retrouvée en ligne » et a établi une liste de critères pouvant l’évaluer. Entre les mois d’avril et juillet 2002, une équipe représentant 13 pays a visité 460 sites web destinés à fournir de l’information sur la santé, sur des produits financiers et sur les prix de voyages et de différents biens de consommation en utilisant ces critères. L’appréciation de ces données nous démontre que les consommateurs doivent faire preuve de prudence lorsqu’ils utilisent Internet comme source d’information. Afin de faire des choix éclairés sur la valeur à donner à une information retrouvée en ligne, les consommateurs doivent connaître ce qui suit : L’identité du propriétaire d’un site web, ses partenaires et publicitaires; La qualité de l’information fournie, incluant son actualité et sa clarté, l’identité des sources citées et l’autorité des individus donnant leur opinion; Si le contenu du site est contrôlé par des intérêts commerciaux, ou, s’il offre des liens, la nature de la relation avec le site visé; et Si on lui demandera de fournir des données personnelles, l’usage réservé à ces données et les mesures employées pour protéger ces données. Cette étude démontre que plusieurs sites ne fournissent pas suffisamment de détails dans ces domaines, ce qui risque d’exposer le consommateur à des informations inexactes, incomplètes ou même délibérément fausses. Les discours exagérés ou vagues de certains sites concernant leurs services ne fait qu’ajouter à la confusion. Ceci peut résulter en une perte de temps ou d’argent pour le consommateur, mais pour certaines catégories d’informations, comme les conseils visant la santé, le fait de se fier à de mauvais conseils peut avoir des conséquences beaucoup plus graves. Cette étude vise à aviser les consommateurs de toujours vérifier le contexte des sites avant de se fier aux informations qui s’y retrouvent. Elle demande aux entreprises d’adopter de meilleures pratiques commerciales et de fournir une information plus transparente afin d’accroître la confiance des consommateurs. Elle demande finalement aux gouvernements de contribuer à ce mouvement en assurant le respect des lois relatives à la consommation et des standards existants tant dans le monde réel que dans le monde virtuel."