Heterogeneous Collaborative Sensor Network for Electrical Management of an Automated House with PV Energy

In this paper we present a heterogeneous collaborative sensor network for electrical management in the residential sector. Improving demand-side management is very important in distributed energy generation applications. Sensing and control are the foundations of the “Smart Grid” which is the future of large-scale energy management. The system presented in this paper has been developed on a self-sufficient solar house called “MagicBox” equipped with grid connection, PV generation, lead-acid batteries, controllable appliances and smart metering. Therefore, there is a large number of energy variables to be monitored that allow us to precisely manage the energy performance of the house by means of collaborative sensors. The experimental results, performed on a real house, demonstrate the feasibility of the proposed collaborative system to reduce the consumption of electrical power and to increase energy efficiency.

A review of the potential of renewable energy sources for the State of Jammu and Kashmir (India)

The future economic development trajectory for India is likely to result in rapid and accelerated growth in energy demand, with expected shortages. Many of its current policies and strategies are aimed at the improvement and possible maximization of energy production from the renewable sector. It is also clear that while energy-conservation and energy-efficiency can make an important contribution in the national energy strategy, renewable energies will be essential to the solution and are likely to play an increasingly important role for the growth of grid power, providing energy access, reducing consumption of fossil fuels, and helping India pursue its low carbon progressive pathway. However, most of the states in India, like the northernmost State of Jammu and Kashmir (J&K), have experienced an energy crisis over a sustained period of time. As India intends to be one of the emerging powers of the 21st century, it has to embark upon with these pressing issues in a more sustainable manner and accordingly initiate various renewable energy projects within these states. This paper will provide a broad-spectrum view about the energy situation within J&K and will highlight the current policies along with future strategies for the optimal utilization of renewable energy resources.

Potential of the renewable energy development in Jammu and Kashmir, India

The future economic growth for India is likely to result in rapid and accelerated surge in energy demand, with expected shortages in terms of supply. Many of its current policies and strategies are aimed at the improvement and possible maximization of energy production from the renewable sector. It is also clear that while energy conservation and energy efficiency can make an important contribution, renewable energies will be essential to the solution and are likely to play an increasingly important role for providing enhanced energy access, reducing consumption of fossil fuels, and helping India pursue its low-carbon progressive pathway. However, most of the states in India, like the northernmost state of Jammu and Kashmir, have experienced an energy crisis over a sustained period of time and the government both at center and state level has to embark upon with these pressing issues in a more sustainable manner and accordingly initiate various renewable energy projects within these states. This paper will provide a broad-spectrum view about the energy situation within Jammu and Kashmir and will highlight the current policies along with future strategies for the optimal utilization of renewable energy resources.

Economic analysis of the renewable energy policies in the European Union

The European energy sector is undergoing a major transformation and is facing a series of difficult challenges. These include a high and increasing dependence on external energy resources; dramatically reduce the need for the emissions of greenhouse gases to meet environmental objectives and the difficulties related to the promotion of energy market effectively integrated and competitive. Some of the policies associated with the various objectives are sometimes in conflict with each other, while in other cases are mutually reinforcing.The aim of this paper is to do a scienti?c analysis of the developments so far and the expectations for the coming period focusing on the pillars of energy policy in the EU in terms of security of supply, environment, climate change and promoting a competitive and integrated market. The use of renewable energy sources is seen as a key element of European energy policy and should help to: reduce dependence on fuel from non-member countries; reduce emissions from carbon-based energy sources, and; decouple energy costs from oil prices.

The impact of sustainable construction and knowledge management on sustainability goals. A review of the venezuelan renewable energy sector

The recognition of the relevance of energy, especially of the renewable energies generated by the sun, water, wind, tides, modern biomass or thermal is growing significantly in the global society based on the possibility it has to improve societies′ quality of life, to support poverty reduction and sustainable development. Renewable energy, and mainly the energy generated by large hydropower generation projects that supply most of the renewable energy consumed by developing countries, requires many technical, legal, financial and social complex processes sustained by innovations and valuable knowledge. Besides these efforts, renewable energy requires a solid infrastructure to generate and distribute the energy resources needed to solve the basic needs of society. This demands a proper construction performance to deliver the energy projects planned according to specifications and respecting environmental and social concerns, which implies the observance of sustainable construction guidelines. But construction projects are complex and demanding and frequently face time and cost overruns that may cause negative impacts on the initial planning and thus on society. The renewable energy issue and the large renewable energy power generation and distribution projects are particularly significant for developing countries and for Latin America in particular, as this region concentrates an important hydropower potential and installed capacity. Using as references the performance of Venezuelan large hydropower generation projects and the Guri dam construction, this research evaluates the tight relationship existing between sustainable construction and knowledge management and their impact to achieve sustainability goals. The knowledge management processes are proposed as a basic strategy to allow learning from successes and failures obtained in previous projects and transform the enhancement opportunites into actions to improve the performance of the renewable energy power generation and distribution projects.

Designing and simulating smart grids

Growing energy demands and the increased use of renewal energies have changed the landscape of power networks leading to new challenges. Smart Grids have emerged to cope with these challenges by facilitating the integration of traditional and renewable energy resources in distributed, open, and self-managed ways. Innovative models are needed to design energy infrastructures that can enable self-management of the power grid. Software architectures smoothly integrate the software that provides self-management to Smart Grids and their hardware infrastructures. We present a framework to design the software architectures of autonomous Smart Grids in an intuitive domain-oriented way and to simulate their execution by automatically generating the code from the designed autonomous smart grid architectures.

Comparisson of hydrogen applications for storage and energy vector

For the decades to come can be foreseen that electricity and water will keep be playing a key role in the countries development, both can be considered the most important energy vectors and its control can be crucial for governments, companies and leaders in general. Energy is essential for all human activities and its availability is critical to economic and social development. In particular, electricity, a form of energy, is required to produce goods, to provide medical assistance and basic civic services in education, to assure availability of clean water, to create conducive environment for prosperity and improvement, and to keep an acceptable quality of life. The way in which electricity is generated from different resources varies through the different countries. Nuclear energy controlled within reactors to steam production, gas, fuel-oil and coal fired in power stations, water, solar and wind energy among others are employed, sometimes not very efficiently, to produce electricity. The so call energy mix of an individual country is formed up by the contribution of each resource or form of energy to the electricity generation market of the so country. During the last decade the establishment of proper energy mixes for countries has gained much importance, and energy drivers should enforce long term plans and policies. Hints, reports and guides giving tracks on energy resources contribution are been developed by noticeable organisations like the IEA (International Energy Agency) or the IAEA (International Atomic Energy Agency) and the WEC (World Energy Council). This paper evaluates energy issues the market and countries are facing today regarding energy mix scheduling and panorama. This paper revises and seeks to improve methodology available that are applicable on energy mix plan definition. Key Factors are identified, established and assessed through this paper for the common implementation, the themes driving the future energy mix methodology proposal. Those have a clear influence and are closely related to future environmental policies. Key Factors take into consideration sustainability, energy security, social and economic growth, climate change, air quality and social stability. The strength of the Key Factors application on energy system planning to different countries is contingent on country resources, location, electricity demand and electricity generation industry, technology available, economic situation and prospects, energy policy and regulation

Urban wind energy: empirical optimization of high-rise building roof shape for the wind energy exploitation

El programa Europeo HORIZON2020 en Futuras Ciudades Inteligentes establece como objetivo que el 20% de la energía eléctrica sea generada a partir de fuentes renovables. Este objetivo implica la necesidad de potenciar la generación de energía eólica en todos los ámbitos. La energía eólica reduce drásticamente las emisiones de gases de efecto invernadero y evita los riesgos geo-políticos asociados al suministro e infraestructuras energéticas, así como la dependencia energética de otras regiones. Además, la generación de energía distribuida (generación en el punto de consumo) presenta significativas ventajas en términos de elevada eficiencia energética y estimulación de la economía. El sector de la edificación representa el 40% del consumo energético total de la Unión Europea. La reducción del consumo energético en este área es, por tanto, una prioridad de acuerdo con los objetivos "20-20-20" en eficiencia energética. La Directiva 2010/31/EU del Parlamento Europeo y del Consejo de 19 de mayo de 2010 sobre el comportamiento energético de edificaciones contempla la instalación de sistemas de suministro energético a partir de fuentes renovables en las edificaciones de nuevo diseño. Actualmente existe una escasez de conocimiento científico y tecnológico acerca de la geometría óptima de las edificaciones para la explotación de la energía eólica en entornos urbanos. El campo tecnológico de estudio de la presente Tesis Doctoral es la generación de energía eólica en entornos urbanos. Específicamente, la optimization de la geometría de las cubiertas de edificaciones desde el punto de vista de la explotación del recurso energético eólico. Debido a que el flujo del viento alrededor de las edificaciones es exhaustivamente investigado en esta Tesis empleando herramientas de simulación numérica, la mecánica de fluidos computacional (CFD en inglés) y la aerodinámica de edificaciones son los campos científicos de estudio. El objetivo central de esta Tesis Doctoral es obtener una geometría de altas prestaciones (u óptima) para la explotación de la energía eólica en cubiertas de edificaciones de gran altura. Este objetivo es alcanzado mediante un análisis exhaustivo de la influencia de la forma de la cubierta del edificio en el flujo del viento desde el punto de vista de la explotación energética del recurso eólico empleando herramientas de simulación numérica (CFD). Adicionalmente, la geometría de la edificación convencional (edificio prismático) es estudiada, y el posicionamiento adecuado para los diferentes tipos de aerogeneradores es propuesto. La compatibilidad entre el aprovechamiento de las energías solar fotovoltaica y eólica también es analizado en este tipo de edificaciones. La investigación prosigue con la optimización de la geometría de la cubierta. La metodología con la que se obtiene la geometría óptima consta de las siguientes etapas: - Verificación de los resultados de las geometrías previamente estudiadas en la literatura. Las geometrías básicas que se someten a examen son: cubierta plana, a dos aguas, inclinada, abovedada y esférica. - Análisis de la influencia de la forma de las aristas de la cubierta sobre el flujo del viento. Esta tarea se lleva a cabo mediante la comparación de los resultados obtenidos para la arista convencional (esquina sencilla) con un parapeto, un voladizo y una esquina curva. - Análisis del acoplamiento entre la cubierta y los cerramientos verticales (paredes) mediante la comparación entre diferentes variaciones de una cubierta esférica en una edificación de gran altura: cubierta esférica estudiada en la literatura, cubierta esférica integrada geométricamente con las paredes (planta cuadrada en el suelo) y una cubierta esférica acoplada a una pared cilindrica. El comportamiento del flujo sobre la cubierta es estudiado también considerando la posibilidad de la variación en la dirección del viento incidente. - Análisis del efecto de las proporciones geométricas del edificio sobre el flujo en la cubierta. - Análisis del efecto de la presencia de edificaciones circundantes sobre el flujo del viento en la cubierta del edificio objetivo. Las contribuciones de la presente Tesis Doctoral pueden resumirse en: - Se demuestra que los modelos de turbulencia RANS obtienen mejores resultados para la simulación del viento alrededor de edificaciones empleando los coeficientes propuestos por Crespo y los propuestos por Bechmann y Sórensen que empleando los coeficientes estándar. - Se demuestra que la estimación de la energía cinética turbulenta del flujo empleando modelos de turbulencia RANS puede ser validada manteniendo el enfoque en la cubierta de la edificación. - Se presenta una nueva modificación del modelo de turbulencia Durbin k — e que reproduce mejor la distancia de recirculación del flujo de acuerdo con los resultados experimentales. - Se demuestra una relación lineal entre la distancia de recirculación en una cubierta plana y el factor constante involucrado en el cálculo de la escala de tiempo de la velocidad turbulenta. Este resultado puede ser empleado por la comunidad científica para la mejora del modelado de la turbulencia en diversas herramientas computacionales (OpenFOAM, Fluent, CFX, etc.). - La compatibilidad entre las energías solar fotovoltaica y eólica en cubiertas de edificaciones es analizada. Se demuestra que la presencia de los módulos solares provoca un descenso en la intensidad de turbulencia. - Se demuestran conflictos en el cambio de escala entre simulaciones de edificaciones a escala real y simulaciones de modelos a escala reducida (túnel de viento). Se demuestra que para respetar las limitaciones de similitud (número de Reynolds) son necesarias mediciones en edificaciones a escala real o experimentos en túneles de viento empleando agua como fluido, especialmente cuando se trata con geometrías complejas, como es el caso de los módulos solares. - Se determina el posicionamiento más adecuado para los diferentes tipos de aerogeneradores tomando en consideración la velocidad e intensidad de turbulencia del flujo. El posicionamiento de aerogeneradores es investigado en las geometrías de cubierta más habituales (plana, a dos aguas, inclinada, abovedada y esférica). - Las formas de aristas más habituales (esquina, parapeto, voladizo y curva) son analizadas, así como su efecto sobre el flujo del viento en la cubierta de un edificio de gran altura desde el punto de vista del aprovechamiento eólico. - Se propone una geometría óptima (o de altas prestaciones) para el aprovechamiento de la energía eólica urbana. Esta optimización incluye: verificación de las geometrías estudiadas en el estado del arte, análisis de la influencia de las aristas de la cubierta en el flujo del viento, estudio del acoplamiento entre la cubierta y las paredes, análisis de sensibilidad del grosor de la cubierta, exploración de la influencia de las proporciones geométricas de la cubierta y el edificio, e investigación del efecto de las edificaciones circundantes (considerando diferentes alturas de los alrededores) sobre el flujo del viento en la cubierta del edificio objetivo. Las investigaciones comprenden el análisis de la velocidad, la energía cinética turbulenta y la intensidad de turbulencia en todos los casos. ABSTRACT The HORIZON2020 European program in Future Smart Cities aims to have 20% of electricity produced by renewable sources. This goal implies the necessity to enhance the wind energy generation, both with large and small wind turbines. Wind energy drastically reduces carbon emissions and avoids geo-political risks associated with supply and infrastructure constraints, as well as energy dependence from other regions. Additionally, distributed energy generation (generation at the consumption site) offers significant benefits in terms of high energy efficiency and stimulation of the economy. The buildings sector represents 40% of the European Union total energy consumption. Reducing energy consumption in this area is therefore a priority under the "20-20-20" objectives on energy efficiency. The Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings aims to consider the installation of renewable energy supply systems in new designed buildings. Nowadays, there is a lack of knowledge about the optimum building shape for urban wind energy exploitation. The technological field of study of the present Thesis is the wind energy generation in urban environments. Specifically, the improvement of the building-roof shape with a focus on the wind energy resource exploitation. Since the wind flow around buildings is exhaustively investigated in this Thesis using numerical simulation tools, both computational fluid dynamics (CFD) and building aerodynamics are the scientific fields of study. The main objective of this Thesis is to obtain an improved (or optimum) shape of a high-rise building for the wind energy exploitation on the roof. To achieve this objective, an analysis of the influence of the building shape on the behaviour of the wind flow on the roof from the point of view of the wind energy exploitation is carried out using numerical simulation tools (CFD). Additionally, the conventional building shape (prismatic) is analysed, and the adequate positions for different kinds of wind turbines are proposed. The compatibility of both photovoltaic-solar and wind energies is also analysed for this kind of buildings. The investigation continues with the buildingroof optimization. The methodology for obtaining the optimum high-rise building roof shape involves the following stages: - Verification of the results of previous building-roof shapes studied in the literature. The basic shapes that are compared are: flat, pitched, shed, vaulted and spheric. - Analysis of the influence of the roof-edge shape on the wind flow. This task is carried out by comparing the results obtained for the conventional edge shape (simple corner) with a railing, a cantilever and a curved edge. - Analysis of the roof-wall coupling by testing different variations of a spherical roof on a high-rise building: spherical roof studied in the litera ture, spherical roof geometrically integrated with the walls (squared-plant) and spherical roof with a cylindrical wall. The flow behaviour on the roof according to the variation of the incident wind direction is commented. - Analysis of the effect of the building aspect ratio on the flow. - Analysis of the surrounding buildings effect on the wind flow on the target building roof. The contributions of the present Thesis can be summarized as follows: - It is demonstrated that RANS turbulence models obtain better results for the wind flow around buildings using the coefficients proposed by Crespo and those proposed by Bechmann and S0rensen than by using the standard ones. - It is demonstrated that RANS turbulence models can be validated for turbulent kinetic energy focusing on building roofs. - A new modification of the Durbin k — e turbulence model is proposed in order to obtain a better agreement of the recirculation distance between CFD simulations and experimental results. - A linear relationship between the recirculation distance on a flat roof and the constant factor involved in the calculation of the turbulence velocity time scale is demonstrated. This discovery can be used by the research community in order to improve the turbulence modeling in different solvers (OpenFOAM, Fluent, CFX, etc.). - The compatibility of both photovoltaic-solar and wind energies on building roofs is demonstrated. A decrease of turbulence intensity due to the presence of the solar panels is demonstrated. - Scaling issues are demonstrated between full-scale buildings and windtunnel reduced-scale models. The necessity of respecting the similitude constraints is demonstrated. Either full-scale measurements or wind-tunnel experiments using water as a medium are needed in order to accurately reproduce the wind flow around buildings, specially when dealing with complex shapes (as solar panels, etc.). - The most adequate position (most adequate roof region) for the different kinds of wind turbines is highlighted attending to both velocity and turbulence intensity. The wind turbine positioning was investigated for the most habitual kind of building-roof shapes (flat, pitched, shed, vaulted and spherical). - The most habitual roof-edge shapes (simple edge, railing, cantilever and curved) were investigated, and their effect on the wind flow on a highrise building roof were analysed from the point of view of the wind energy exploitation. - An optimum building-roof shape is proposed for the urban wind energy exploitation. Such optimization includes: state-of-the-art roof shapes test, analysis of the influence of the roof-edge shape on the wind flow, study of the roof-wall coupling, sensitivity analysis of the roof width, exploration of the aspect ratio of the building-roof shape and investigation of the effect of the neighbouring buildings (considering different surrounding heights) on the wind now on the target building roof. The investigations comprise analysis of velocity, turbulent kinetic energy and turbulence intensity for all the cases.

Valorización energética de biomasas en el marco de la política energética española. Incentivos económico-financieros y políticos, aportación de valor añadido y prospectiva estratégica de desarrollo

El modelo económico actual basado en el consumo y en la búsqueda permanente de una mayor calidad de vida, unido a una población mundial en aumento, contribuye a incrementar la demanda de servicios energéticos para cubrir las necesidades de energía de las personas y las industrias. Desde finales del siglo XIX la energía se ha generado fundamentalmente a partir de combustibles fósiles (carbón, petróleo y gas), convertidos en el suministro energético predominante mundialmente. Las emisiones de gases de efecto invernadero que genera la prestación de servicios energéticos han contribuido considerablemente al aumento histórico de las concentraciones de esos gases en la atmósfera, hasta el punto de que el consumo de combustibles fósiles es responsable de la mayoría de las emisiones antropogénicas (IPCC, 2012). Existen diversas opciones para disminuir las emisiones de gases de efecto invernadero del sector energético y con ello contribuir a mitigar el cambio climático, entre otras sería viable aumentar la eficiencia energética y sustituir combustibles de origen fósil por combustibles de origen renovable, pudiendo garantizar un suministro de energía sostenible, competitivo y seguro. De todas las energías renovables susceptibles de formar parte de una cartera de opciones de mitigación, esta tesis se centra en la bioenergía generada a partir de la valorización energética de las biomasas agrícolas, forestales, ganaderas o de otro tipo, con fines eléctricos y térmicos. Con objeto de mostrar su capacidad para contribuir a mitigar el cambio climático y su potencial contribución al desarrollo socioeconómico, a la generación de energía distribuida y a reducir determinados efectos negativos sobre el medio ambiente, se ha analizado minuciosamente el sector español de la biomasa en su conjunto. Desde el recurso biomásico que existe en España, las formas de extraerlo y procesarlo, las tecnologías de valorización energética, sus usos energéticos principales y la capacidad de implementación del sector en España. Asimismo se ha examinado el contexto energético tanto internacional y europeo como nacional, y se han analizado pormenorizadamente los instrumentos de soporte que han contribuido de manera directa e indirecta al desarrollo del sector en España. Además, la tesis integra el análisis de los resultados obtenidos mediante dos metodologías diferentes con fines también distintos. Por un lado se han obtenido los resultados medioambientales y socioeconómicos de los análisis de ciclo de vida input-output generados a partir de las cinco tecnologías biomásicas más ampliamente utilizadas en España. Y por otro lado, en base a los objetivos energéticos y medioambientales establecidos, se han obtenido distintas proyecciones de la implementación del sector a medio plazo, en forma de escenarios energéticos con horizonte 2035, mediante el modelo TIMES-Spain. La tesis ofrece también una serie de conclusiones y recomendaciones que podrían resultar pertinentes para los agentes que constituyen la cadena de valor del propio sector e interesados, así como para la formulación de políticas y mecanismos de apoyo para los agentes decisores, tanto del ámbito de la Administración General del Estado como autonómico y regional, sobre las características y ventajas de determinadas formas de valorización, sobre los efectos sociales y medioambientales que induce su uso, y sobre la capacidad de sector para contribuir a determinadas políticas más allá de las puramente energéticas. En todo caso, esta tesis doctoral aspira a contribuir a la toma de decisiones idóneas tanto a los agentes del sector como a responsables públicos, con objeto de adoptar medidas orientadas a fomentar modificaciones del sistema energético que incrementen la proporción de energía renovable y, de esta forma, contribuir a mitigar la amenaza que supone el cambio climático no solo en la actualidad, sino especialmente en los próximos años para las generaciones venideras. ABSTRACT The current economic model based on both, consumption and the constant search for greater quality of life, coupled with a growing world population, contribute to increase the demand for energy services in order to meet the energy needs of people and industries. Since the late nineteenth century, energy has been basically generated from fossil fuels (coal, oil and gas), which converted fossil fuels into the predominant World energy supply source. Emissions of greenhouse gases generated by the provision of energy services have contributed significantly to the historical increase in the concentrations of these gases in the atmosphere, to the extent that the consumption of fossil fuels is responsible for most of the anthropogenic emissions (IPCC, 2012). There are several options to reduce emissions of greenhouse gases in the energy sector and, thereby, to contribute to mitigate climate change. Among others, would be feasible to increase energy efficiency and progressively replacing fossil fuels by renewable fuels, which are able to ensure a sustainable, competitive and secure energy supply. Of all the renewable energies likely to form part of a portfolio of mitigation options, this thesis focuses on bioenergy generated from agricultural, forestry, farming or other kind of biomass, with electrical and thermal purposes. In order to show their ability to contribute to mitigate climate change and its potential contribution to socio-economic development, distributed energy generation and to reduce certain negative effects on the environment, the Spanish biomass sector as a whole has been dissected. From the types of biomass resources that exist in Spain, ways of extracting and processing them, energy production technologies, its main energy uses and the implementation capacity of the sector in Spain. It has also examined the international, European and national energy context, and has thoroughly analyzed the support instruments that have contributed directly and indirectly to the development of the sector in Spain, so far. Furthermore, the thesis integrates the analysis of results obtained using two different methodologies also with different purposes. On the one hand, the environmental and socio-economic results of the analysis of input-output cycle life generated from the five biomass technologies most widely used in Spain, have been obtained. On the other hand, different projections of the implementation of the sector in the medium term, as energy scenarios with horizon 2035, have been obtained by the model TIMES-Spain, based on several energy and environmental objectives. The thesis also offers a series of conclusions and recommendations that could be relevant to the agents that constitute the value chain of the biomass sector itself and other stakeholders. As well as policy and support mechanisms for decision-makers, from both: The Central and Regional Governments, on the characteristics and advantages of certain forms of valorization, on the social and environmental effects that induce their use, and the ability of the biomass sector to contribute to certain policies beyond the purely energy ones. In any case, this thesis aims to contribute to decision making, suitable for both: Industry players and to public officials. In order to adopt measures to promote significant changes in the energy system that increase the proportion of renewable energy and, consequently, that contribute to mitigate the threat of climate change; not only today but in the coming years, especially for future generations.

Solar driven energy conversion applications based on 3C-SiC

There is a strong and growing worldwide research on exploring renewable energy resources. Solar energy is the most abundant, inexhaustible and clean energy source, but there are profound material challenges to capture, convert and store solar energy. In this work, we explore 3C-SiC as an attractive material towards solar-driven energy conversion applications: (i) Boron doped 3C-SiC as candidate for an intermediate band photovoltaic material, and (ii) 3C-SiC as a photoelectrode for solar-driven water splitting. Absorption spectrum of boron doped 3C-SiC shows a deep energy level at ~0.7 eV above the valence band edge. This indicates that boron doped 3C-SiC may be a good candidate as an intermediate band photovoltaic material, and that bulk like 3C-SiC can have sufficient quality to be a promising electrode for photoelectrochemical water splitting.

A integração da indústria de energia elétrica na América do Sul: análise dos modelos técnicos e de regulamentação.

Os recursos energéticos naturais não estão distribuídos uniformemente pelo globo terrestre, e são raros os países que os têm na quantidade e na qualidade que necessitam para atender as suas necessidades. Ante a essa realidade, o comércio de energéticos tem sido a forma principal de acesso dos países que não os dispõem em relação as suas necessidades. Esse comércio, que muitas vezes é regido por tratados ou acordos firmados entre países ou blocos econômicos regionais, diversificou-se, traspassou fronteiras e, atualmente, tornou-se um item significativo nas pautas de exportações de vários países. A evolução desse comércio tem a favor a alternativa de integração por meio de interconexões estratégicas de redes e da constituição de mercados comuns, que viabilizam a exploração do potencial de complementariedade energética de forma mais racional. Diante desse contexto, esta dissertação apresenta um estudo exploratório que avalia o estado da arte da integração energética sul-americana e faz análises dos modelos técnicos, das regulamentações, das regulações regionais e multilaterais estabelecidas pelos blocos econômicos sul-americanos e pela Organização Mundial do Comércio. De forma complementar, o estudo verifica e apresenta os fatores que podem comprometer o avanço e a instituição de um futuro mercado comum de energia no continente, conclui pela viabilidade do prosseguimento de ações em prol da ampliação da integração da indústria de energia elétrica na América do Sul e tece recomendações. Os resultados e as recomendações deste trabalho oferecem um embasamento procedimental para a gestão e a atuação institucional dos envolvidos no processo de integração energética da indústria de energia elétrica da região sul americana.

Colaboração e cooperação entre sistemas produtivos dispersos de empresas virtuais.

No mercado global e digital, as empresas são desafiadas a encontrar caminhos inovadores para atender o aumento da pressão -competitiva. A competição é uma das formas de interação das organizações, além da colaboração e da cooperação. A cooperação e a colaboração apresentam formas de produzir conjuntamente aumentando o potencial de atendimento das empresas. Os desafios mais encontrados no mercado são: reduzir os custos, sempre assegurar qualidade e personalizar os produtos e serviços. Um fenômeno de negócios comum hoje é a terceirização da manufatura e da logística para fornecedores domésticos e estrangeiros e provedores de serviços. Essa terceirização provoca, intrinsecamente, um espalhamento geográfico da produção em novos centros que oferecem vantagens nos recursos energéticos, matérias primas e centros de produção de conhecimento. Essa terceirização pode ser realizada também nas formas de colaboração e cooperação. Para isso, as empresas necessitam estabelecer uma forma de confiança entre si. No conceito de empresa virtual, a confiança é amplamente discutida para atingir uma colaboração e/ou cooperação entre empresas. O objetivo deste trabalho é propor e modelar uma ferramenta que atenda as necessidades das empresas para colaboração e/ou cooperação entre elas, considerando suas necessidades de confiança. As empresas aqui são vistas como sistemas produtivos, com suas camadas de gerenciamento de negócios, de acordo com o padrão ANSI/ISA 95. Além disso, um tipo de interpretação da rede de Petri, chamada de rede de Petri produtiva é introduzida como ferramenta para descrever o processo produtivo realizado pelas empresas na forma de workflow. A modelagem dessa arquitetura do sistema produtivo utiliza técnicas de sistemas distribuídos, como a arquitetura orientada a serviços. Além disso, um dos enfoques é das necessidades para o desenvolvimento de novos produtos, que envolve o desafio de personalização. Testes foram realizados para avaliar a proposta de workflow com pessoas de diferentes níveis de conhecimento sobre os processos, sejam de manufatura, sejam de outras áreas. Já a arquitetura proposta foi submetida a um estudo analítico das hipóteses levantadas no ambiente colaborativo.

Between energy security and energy market integration. Guidelines for the future development of the EU’s external energy policy in Europe’s neighbourhood. OSW Report, June 2011

For many years the European Union has been improving the efficient use of energy resources and yet the demand for energy in the EU continues to increase. When Europe belonged to one of the world’s key energy markets with relatively easy access to energy resources, growing energy needs were not seen as a source of concern. Today, however, as the competition for energy resources is intensifying and the global position of the EU energy market is being challenged by growing economies in the developing countries, above all China and India, the EU needs to adopt bold policies to guarantee the sustainable supply of energy. This report argues the EU needs to develop a fully-fledged external energy policy; i.e. a common, coherent, strategic approach that build bridges between the interests and needs of the EU integrated energy market on the one hand and supplier countries on the other. The EU’s external energy policy has two main objectives. The first one is to ensure a sustainable, stable and cost-effective energy supply. The second is to promote energy market integration and regulatory convergence with neighbouring countries (often but not always this supports the achievement of the first objective). However, in order to improve its effectiveness, the EU’s external energy policy needs to be seen in a broader economic and political context. Any progress in energy cooperation with third countries is contingent upon the EU’s general stance and offer to those countries.

Turcja - korytarz transzytowy dla surocow energetycznych do UE? Prace OSW 17/2005. = Turkey - an energy transit corridor to the EU? OSW Study 17/2005

1. The priority of Ankara's energy policy is to make Turkey an important transit corridor for energy resources transported to the EU. Turkey wishes to play an active role in the distribution and sale of gas and oil flowing across its territory. 2. Transit and sale of energy resources, and gas in particular, are expected to provide a major source of income for Turkey and a tool by which Ankara will be able to build its position in the region and in Europe. 3. Since Turkey is an EU candidate country, Brussels will probably welcome Turkey's role as a transit corridor as much as Ankara will. 4. The success of Ankara's energy strategy hinges on developments in Turkey's internal energy market. 5. It also depends on a number of external factors including: - Export policies and internal situation in producer countries. Most importantly, it depends on: a. Russia and its energy policy priorities b. Stability in the Middle East. - Policies of consumer countries, including the EU in particular. - Policies of world powers present in the region (USA).

Energy Efficiency: Trends and Perspectives in the Southern Mediterranean. MEDPRO Technical Report No. 21/December 2012

This paper has two objectives. First, it attempts to establish the potential of policies on energy efficiency and energy demand-side management in the southern Mediterranean region. Second, by examining past trends in energy intensity and trends up to 2030, it analyses the prospects and costs of such policies, compared with expected developments in the price of energy resources. Based on both analyses (MEDPRO WP4) and on prospects for growth (MEDPRO WP8), it seems that energy intensity in the Mediterranean should fall perceptibly by approximately 13% in the next 20 years. But given the programmed energy mix, this will not limit emissions of CO2, which are likely to increase by more than 90%. The paper first presents the rationale for demand-side management (DSM) policies. After a general discussion of concepts, it tackles the question of instruments and measures for implementing such policies, before posing the question of the cost-efficiency approach for monitoring the measures the authorities introduce. Secondly, the paper assesses energy consumption and energy efficiency in the countries of the southern Mediterranean and the ways in which their main economic sectors have changed in recent decades. The third section outlines the demand management measures introduced and, taking Tunisia and Egypt as examples, estimates the cost of such policies. The fourth and last section offers a forecast analysis of energy consumption in the Mediterranean up to 2030, highlighting probable trends in terms of final consumption, energy intensity, energy mix and emissions of CO2. The section concludes with estimates in terms of cost, comparing objectives for lower intensity, results in terms of resource savings and the types of costs this approach represents.