Efecto de la suplementación con alimento vivo en el desempeño productivo del pez disco (Symphysodon aequefaciatus)

Bogotá (Colombia): Universidad de La Salle. Facultad de Ciencias Agropecuarias. Programa de Zootecnia

Há alguma diferença entre as próteses de disco cervicais?

Objetivo: A artroplastia cervical na patologia degenerativa surgiu como alternativa à artrodese anterior com o objetivo de eliminar a “doença do nível adjacente”. As próteses de disco apresentam diferentes materiais, design, técnica e mobilidade. Os autores avaliaram dor, disfunção e complicações para comparar a eficácia de diferentes próteses de disco.

Simulación de un enlace óptico WDM (Wavelength Division Multiplexing) utilizando POFs (Polymer Optical Fiber) en el espectro de luz visible

En este proyecto se analizaron las características y el modo de operación de las fibras ópticas plásticas en un enlace óptico WDM (Wavelenght Division Multiplexing) operando en el espectro visible. Se estudiaron los componentes activos y pasivos necesarios para el enlace, como son las fuentes LED, multiplexores, filtros y acopladores. Se analizaron los efectos no lineales que se pueden presentar en la fibra óptica, y que son importantes de considerar al transmitir señales WDM. Para respaldar el análisis se simuló en MATLAB un enlace óptico en el dominio de la frecuencia utilizando fuentes LED que emiten en el espectro visible, junto con multiplexores WDM, filtros de absorción, acopladores y como medio de transmisión la Fibra Óptica Plástica (POF -Plastic Optical Fiber).

Novas metodologias no ensino do inglês : o ensino de línguas em disco compacto interactivo

Académico - Licenciaturas

Editorial

Presented in this bulletin educational innovation that changes the traditional teaching of library and documentation with the inclusion of tools such as computer and support documents: the compact disc, floppy disks, optical media mail. It proposes a contemporary conception of storage and retrieval revolutionizing the traditional world of paper.

Optimización de parámetros y modelación matemática del proceso de soldadura por láser de disco de diodos YB:YAG, aplicado en aceros avanzados AHSS

La aplicación del uso de la tecnología láser para la unión de materiales se ha incrementado sustancialmente en la industria metal-mecánica, esto se atribuye principalmente a las diferentes ventajas que tiene este proceso sobre los procesos de soldadura convencionales, como son la reducción en el costo de procesamiento, aumento de la productividad, incremento de la calidad del producto, la reducción de las zonas afectadas por el calor, la reducción de la distorsión en la piezas soldadas y además la versatilidad que representa la soldadura láser por ser un proceso sin contacto. No obstante el uso del láser para la unión de materiales en México se considera todavía una tecnología emergente, son muy pocas las industrias que han migrado de los procesos de soldadura convencionales al proceso de unión de materiales por rayo láser. Una de las industrias que ha empezado a utilizar el proceso de soldadura por láser en México, es la automotriz, en la cual constantemente se está buscado evitar un rezago tecnológico en los procesos de conformado y soldadura de piezas metálicas. Sin embargo en la actualidad, en la industria automotriz mexicana existe una gran dependencia de expertos de otros países para la supervisión, atención y el control de los procesos avanzados, como lo es el de la soldadura láser.En este trabajo, para lograr una mayor comprensión del proceso y del efecto de sus variables, se propuso aplicar una metodología de optimización en dos casos de estudio, en los cuales se utilizó una configuración de unión de soldadura a traslape con el modo de soldadura de ojo de cerradura o penetración completa, que es más bien conocida como “Keyhole welding”.

Reabilitação física de cães com hérnias de disco toracolombares

Dissertação de Mestrado Integrado em Medicina Veterinária

Avaliação do sensor óptico de vegetação OptRx® na monitorização da variabilidade espacial e temporal de pastagens

estimativa da produtividade das pastagens constitui uma etapa fundamental para o gestor agrícola em termos de planeamento do encabeçamento animal, organização dos lotes de animais e avaliação das necessidades de suplementação alimentar ao longo do ano. O objectivo principal deste trabalho consistiu na avaliação de um sensor óptico activo (“OptRx”, que mede o índice NDVI, “Normalised Difference Vegetation Index”) para monitorizar de forma expedita aspectos relacionados com a variabilidade da pastagem e apoiar a tomada de decisão do gestor agrícola. Os resultados obtidos demonstraram o potencial que apresenta o índice NDVI para monitorizar a evolução do padrão espacial e temporal do estado vegetativo de uma pastagem biodiversa. Índices mais elevados foram registados à medida que a pastagem se aproximava do seu maior vigor vegetativo, notando-se uma quebra significativa destes índices no final da Primavera, quando a pastagem começou a secar em virtude da conjugação de temperaturas mais elevadas com a redução dos teores de humidade no solo. Este índice foi também efectivo na identificação de diferentes famílias botânicas (gramíneas/leguminosas) e diferentes produtividades na pastagem. Por outro lado, foi possível desenvolver equações de calibração do NDVI com a produção de matéria verde e de matéria seca (em kg/ha), tendo sido evidenciada uma relação inversa deste índice com o teor de matéria seca (em %) de pastagens de sequeiro do Alentejo.

Apedunculata discoidea gen. n., sp. n. (Monogenea: Dactylogyridae) parasitic on Prochilodus lineatus (Valenciennes, 1837) (Characiformes: Prochilodontidae) from southeastern Brazil

A new species of dactylogyrid monogenean, Apedunculata discoidea gen. n., sp. n. is described and illustrated from the gills of the freshwater fish Prochilodus lineatus (Valenciennes, 1837) in pisciculture ponds from Pirassununga, São Paulo, Brazil. Diagnostic characters of the new genus and species are: 1) vagina dextrolateral slightly sclerotised, opening anteriorly at level of copulatory complex; 2) copulatory organ coiled with two counterclockwise rings; 3) Accessory piece distal and not articulated; 4) body disk-shaped, lacking a peduncle.

Avaliação e conduta em escolares portadores de visão subnormal atendidos em sala de recursos

Purpose: To identify improvement in visual performance of low vision students after assessment and management conducted at the Low Vision Service of State University of Campinas (UNICAMP). Method: Fourteen low vision students aged six to 30 years, attended in a room with resources for visual deficiency in Americana and Santa Bárbara d'Oeste -- SP during 1998 received complete ophthalmologic examination, specialized low vision assessment and educational intervention. Results: The most prevalent cause of vision loss was operated congenital cataract with four cases (28.6%), followed by congenital bilateral toxoplasmic macular scars and eye malformation, both with two cases (14.3%) cases each. Eight students (57.2%) had acuity classified as severe vision loss, four (28.6%) profound, one (7.1%) moderate and one (7.1%) nearly normal vision. Twelve (85.7%) were behind expected school grade. Optical aids were prescribed for 12 (85.8%) students but only 7 (58.3%) acquired the aids thus improving significantly their school performance. Conclusion: All students improved school performance even considering that 12 (85.7%) had severe to profound vision loss. As a group their performance could even be better if the optical aid prescriptions were acquired by all. This indicates the need of a social work to support such needs. For good results at school and effective student inclusion a partnership between school, family and specialized education is necessary. We recommend to promote the benefits of the resource room.

Concepção e implementação de um sistema para analise cinematica de movimentos humanos

Universidade Estadual de Campinas. Faculdade de Educação Física

Effect of different cleansers on the surface of removable partial denture

Removable partial dentures (RPD) demand specific hygienic cleaning and the combination of brushing with immersion in chemical solutions has been the most recommended method for control of biofilm. However, the effect of the cleansers on metallic components has not been widely investigated. This study evaluated the effect of different cleansers on the surface of RPD. Five disc specimens (12 mm x 3 mm metallic disc centered in a 38 x 18 x 4 mm mould filled with resin) were obtained for each experimental situation: 6 solutions [Periogard (PE), Cepacol (CE), Corega Tabs (CT), Medical Interporous (MI), Polident (PO), 0.05% sodium hypochlorite (NaOCl), and distilled water (DW) control] and 2 Co-Cr alloys [DeguDent (DD) and VeraPDI (VPDI)] were used for each experimental situation. A 180-day immersion was simulated and the measurements of roughness (Ra, µm) of metal and resin were analyzed using 2-way ANOVA and Tukey’s test. The surface changes and tarnishes were examined with a scanning electronic microscopy (SEM). In addition, energy dispersive x-ray spectrometry (EDS) analysis was carried out at representative areas. Visually, NaOCl and MI specimens presented surface tarnishes. The roughness of materials was not affected by the solutions (p>0.05). SEM images showed that NaOCl and MI provided surface changes. EDS analysis revealed the presence of oxygen for specimens in contact with both MI and NaOCl solutions, which might suggest that the two solutions promoted the oxidation of the surfaces, thus leading to spot corrosion. Within the limitations of this study, it may be concluded that the NaOCl and MI may not be suitable for cleaning of RPD.

Relation between implant/abutment vertical misfit and torque loss of abutment screws

This study investigated whether there is a direct correlation between the level of vertical misfit at the abutment/implant interface and torque losses (detorque) in abutment screws. A work model was obtained from a metal matrix with five 3.75 x 9 mm external hex implants with standard platform (4.1 mm). Four frameworks were waxed using UCLA type abutments and one-piece cast in commercially pure titanium. The misfit was analyzed with a comparator microscope after 20 Ncm torque. The highest value of misfit observed per abutment was used. The torque required to loose the screw was evaluated using a digital torque meter. The torque loss values, measured by the torque meter, were assumed as percentage of initial torque (100%) given to abutment screws. Pearson's correlation (α=0.05) between the misfit values (29.08 ± 8.78 µm) and the percentage of detorque (50.71 ± 11.37%) showed no statistically significant correlation (p=0.295). Within the limitations of this study, it may be concluded that great vertical misfits dot not necessarily implies in higher detorque values.

Juvenile idiopathic arthritis with involvement of the temporomandibular joint: the role of image examinations

PURPOSE: Juvenile idiopathic arthritis (JIA) has unknown etiology, and the involvement of the temporomandibular joint (TMJ) is rare in the early phase of the disease. The present article describes the use of computed tomography (CT) and magnetic resonance (MRI) images for the diagnosis of affected TMJ in JIA. CASE DESCRIPTION: A 12-year-old, female, Caucasian patient, with systemic rheumathoid arthritis and involvement of multiple joints was referred to the Imaging Center for TMJ assessment. The patient reported TMJ pain and limited opening of the mouth. The helical CT examination of the TMJ region showed asymmetric mandibular condyles, erosion of the right condyle and osteophyte-like formation. The MRI examination showed erosion of the right mandibular condyle, osteophytes, displacement without reduction and disruption of the articular disc. CONCLUSION: The disorders of the TMJ as a consequence of JIA must be carefully assessed by modern imaging methods such as CT and MRI. CT is very useful for the evaluation of discrete bone changes, which are not identified by conventional radiographs in the early phase of JIA. MRI allows the evaluation of soft tissues, the identification of acute articular inflammation and the differentiation between pannus and synovial hypertrophy.