Production cross-section of Ra-230 in the reaction of 60 MeV/u O-18 ions with U-238

A thick natural uranium target was bombarded with a 60 MeV/u O-18 beam. The neutron-rich isotope Ra-230 as the target residue was produced through the multinucleon transfer reaction (U-238-4p-4n). The barium and radium fraction as BaCl2 precipitate were radiochemically separated first from the mixture of uranium and reaction products. Then, the radium fraction was separated from BaCl2 precipitate by using cation exchange technique. The gamma-ray spectra of the Ra fraction were measured using an HPGe detector. The production cross sections of Ra-230 were obtained by a combination of the radiochemical separation technique and off-line gamma-ray spectroscopy. The cross section of Ra-230 has been determined to be 66 +/- 20 mu b.

80 MeV/u C-12离子诱变选育PHB高产菌株；A strain of high PHB output by mutagenesis of 80 MeV/u C-12 ions

用80MeV/u12C6+离子对一株积累聚β-羟基丁酸酯(PHB)的芽孢杆菌(BacillusP-9)进行诱变选育,最终获得PHB高产株菌G15,其PHB产量达2.93g/L,与出发菌株相比较,PHB积累量提高了1.5倍。研究结果表明,本试验辐照最佳剂量为15Gy。重离子辐照诱变育种效果显著,具有广阔的发展应用前景。

~(12)C与~(209)Bi反应中Au同位素的产额与Q_(gg)的关系；Q_(gg)-Yield Dependence of Au Isotopes in Interaction of 47 MeV/u ~(12)C With ~(209)Bi

用47MeV/u12C离子轰击天然铋靶,通过炮弹和靶核之间的核子转移反应产生Au同位素。使用放射化学方法从大量Bi和复杂反应产物中分离、纯化Au,并制备Au的γ射线测量源。使用HPGe探测器测量放射性Au同位素的γ活性。根据照射结束时Au同位素的活度和其他相关数据,确定每个Au同位素的产生截面。分析发现,缺中子Au同位素的产生截面与Qgg值之间不遵从指数依赖关系,这可用重离子碰撞中的次级过程加以解释。

Dinoflagellate cysts as potential indicators of industrial pollution in a Norwegian Fjord

Variation in dinoflagellate cyst assemblages through the last approximately 300 years was studied in two sediment cores, one from the heavily polluted Frierfjord, and one from the adjoining, relatively unpolluted Brevikfjord, in order to docu1ent possible dinoflagellate responses to pollution. Changes in the cyst-flora were compared with historical information on the development of industry and also with geochemistry of the sediments, reflecting aspects of pollution. In the Frierfjord core, increasing pollution was accompanied by a decrease in cyst concentration, possibly reflecting reduced production, at least of dinoflagellates, and a shift toward more heterotrophic species, possibly reflecting reduced light penetration in the euphotic zone, or increased production of prey for the heterotrophs. These trends seem to have reversed as pollution decreased after about 1975, suggesting that cyst assemblages contain signals that may prove useful for tracing the development of pollution. Cyst assemblages in the Brevikfjord core only showed minor changes.

GENERAL ALPHA-N INDEX AND ITS APPLICATION .1. GENERAL ALPHA-N INDEX AND ITS APPLICATION IN THE EXTRACTION OF Y, CE, U, AND TH BY NEUTRAL PHOSPHORUS EXTRACTANCTS

The general a(N) index is established for molecules containing heteroatoms, rings, and multiple bonds. The general a(N) index is able to describe molecules with minute differences in structure and can also reveal the properties of molecules. This theory is successfully applied to the case of neutral phosphorus extractants. Both the molecular polarity and steric effect are characterized by the general a(N) index. The relationships between these properties and the distribution ratios for extracting Y, Ce, U, and Th are also shown by the general a(N) index.

Theoretical and experimental research on time-optimal trajectory planning and control of industrial robots

提出了一种用于工业机器人时间最优轨迹规划及轨迹控制的新方法，它可以确保在关节位移、速度、加速度以及二阶加速度边界值的约束下，机器人手部沿笛卡尔空间中规定路径运动的时间阳短。在这种方法中，所规划的关节轨迹都采用二次多项式加余弦函数的形式，不仅可以保证各关节运动的位移、速度 、加速度连续而且还可以保证各关节运动的二阶加速度连续。采用这种方法，既可以提高机器人的工作效率又可以延长机器人的工作寿命以PUMA560机器人为对象进行了计算机仿真和机器人实验，结果表明这种方法是正确的有效的。它为工业机器人在非线性运动学约束条件下的时间最优轨迹规划及控制问题提供了一种较好的解决方案。

Modelling of industrial multi-physics processes—a key role for computational mechanics.

In the analysis of industrial processes, there is an increasing emphasis on systems governed by interacting continuum phenomena. Mathematical models of such multi-physics processes can only be achieved for practical simulations through computational solution procedures—computational mechanics. Examples of such multi-physics systems in the context of metals processing are used to explore some of the key issues. Finite-volume methods on unstructured meshes are proposed as a means to achieve efficient rapid solutions to such systems. Issues associated with the software design, the exploitation of high performance computers, and the concept of the virtual computational-mechanics modelling laboratory are also addressed in this context.

Bulk synchronous parallelization of industrial electromagentic software

The parallelization of existing/industrial electromagnetic software using the bulk synchronous parallel (BSP) computation model is presented. The software employs the finite element method with a preconditioned conjugate gradient-type solution for the resulting linear systems of equations. A geometric mesh-partitioning approach is applied within the BSP framework for the assembly and solution phases of the finite element computation. This is combined with a nongeometric, data-driven parallel quadrature procedure for the evaluation of right-hand-side terms in applications involving coil fields. A similar parallel decomposition is applied to the parallel calculation of electron beam trajectories required for the design of tube devices. The BSP parallelization approach adopted is fully portable, conceptually simple, and cost-effective, and it can be applied to a wide range of finite element applications not necessarily related to electromagnetics.

Accelerated carbonation treatment of industrial wastes

The disposal of industrial waste presents major logistical, financial and environmental issues. Technologies that can reduce the hazardous properties of wastes are urgently required. In the present work, a number of industrial wastes arising from the cement, metallurgical, paper, waste disposal and energy industries were treated with accelerated carbonation. In this process carbonation was effected by exposing the waste to pure carbon dioxide gas. The paper and cement wastes chemically combined with up to 25% by weight of gas. The reactivity of the wastes to carbon dioxide was controlled by their constituent minerals, and not by their elemental composition, as previously postulated. Similarly, microstructural alteration upon carbonation was primarily influenced by mineralogy. Many of the thermal wastes tested were classified as hazardous, based upon regulated metal content and pH. Treatment by accelerated carbonation reduced the leaching of certain metals, aiding the disposal of many as stable non-reactive wastes. Significant volumes of carbon dioxide were sequestrated into the accelerated carbonated treated wastes.