Adaptive fuzzy knowledge-based systems for control metabots' mobility on virtual environments

The confluence of three-dimensional (3D) virtual worlds with social networks imposes on software agents, in addition to conversational functions, the same behaviours as those common to human-driven avatars. In this paper, we explore the possibilities of the use of metabots (metaverse robots) with motion capabilities in complex virtual 3D worlds and we put forward a learning model based on the techniques used in evolutionary computation for optimizing the fuzzy controllers which will subsequently be used by metabots for moving around a virtual environment.

Diseño de una práctica para un laboratorio virtual de biotecnología multilingüe y adaptable a alumnos de secundaria

Este trabajo describe el diseño y la implementación de un ejercicio virtual que es parte de una práctica que se realiza en un laboratorio virtual de biotecnología, la adaptación de la misma para que alumnos de secundaria la puedan realizar y por último, la adaptación del laboratorio a un entorno multilingüe. La práctica consiste en transformar genéticamente un árbol (chopo) para dotarlo de una mayor resistencia a enfermedades, especialmente las producidas por hongos y más en concreto, el ejercicio o fase de la práctica a desarrollar consiste en introducir en el plásmido un gen amplificado por la PCR obtenido en la fase anterior de la práctica virtual. La adaptación para alumnos de secundaria servirá para fomentar el interés de estos alumnos por la biotecnología. Asimismo, la adaptación a un entorno multilingüe permitirá que varios alumnos de distintos idiomas realicen la práctica de forma simultánea. Como parte de este trabajo, se ha realizado un análisis sobre OpenSimulator, que es la herramienta utilizada para la creación del entorno virtual, así como de sus visores gráficos para visitar y desarrollar el mundo virtual. Debido a que este proyecto toma como punto de partida un laboratorio virtual con una parte de la práctica virtual ya desarrollada, se ha incluido una descripción de dicho laboratorio para comprender mejor el trabajo que se ha realizado en este proyecto. Finalmente, en este trabajo se presentan los modelos y especificaciones para la extensión del laboratorio virtual. ---ABSTRACT---This document describes the design and implementation of virtual exercise that is part of a practice that is performed in a virtual biotechnology laboratory, the adaptation of this phase to high-school students and finally, the adaptation of laboratory for a multilingual environment. In this practice a tree is genetically modified to give it resistance to diseases produced by fungi. Specifically, the exercise or phase developed consists in introducing in the plasmid a gene amplified by PCR in the previous phase. The adaptation for high-school students will motivate to new students about biotechnology. And the adapting to the multilingual environment will allow several students, such as Erasmus, to do the practice in different languages simultaneously. We analyzed the OpenSimulator platform and the graphic viewers to visit and develop the virtual world. This tool is used for creating the virtual environment. Because of the fact that the project takes a starting point a laboratory with some parts already developed, we have included a description with information related to the laboratory to better understand the work carried out in this project. Finally, this document presents the models and specifications for the extension of the virtual laboratory.

Software architecture implementation based on OpenSim

One of the objectives of the European Higher Education Area is the promotion of collaborative and informal learning through the implementation of educational practices. 3D virtual environments become an ideal space for such activities. On the other hand, the problem of financing in Spanish universities has led to the search for new ways to optimize available resources. The Technical University of Madrid requires the use of laboratories which due to their dangerousness, duration or control of the developed processes are difficult to perform in real life. For this reason, we have developed several 3D laboratories in virtual environment. The laboratories are built on open source platform OpenSim. In this paper it is exposed the use of the OpenSim platform for these new teaching experiences and the new design of the software architecture. This architecture requires the adaptation of the platform to the needs of the users and the different laboratories of our University. We will explain the structure of the implemented architecture and the process of creating and configuring it. The proposed architecture is decentralized, each laboratory is housed in different an educational center. The architecture adds several services, among others, the creation and management of users automated, communication between external services and platforms in different program languages. Therefore, we achieve improving the user experience and rising the functionalities of laboratories.

Record of undergraduates’ activities in virtual learning environments

Virtual learning environments (VLEs) have witnessed a high evolution, namely regarding their potentialities, the tools and the activities they provide. VLEs enable us to access large quantities of data resulting from both students and teachers’ activities developed in those environments. Monitoring undergraduates’ activities in VLEs is important as it allows us to showcase, in a structured way, a number of indicators which may be taken into account to understand the learning process more deeply and to propose improvements in the teaching and learning strategies as well as in the institution’s virtual environment. Although VLEs provide several data sectorial statistics, they do not provide knowledge regarding the institution’s evolution. Therefore, we consider the analysis of the activity logs in VLEs over a period of five years to be paramount. This paper focuses on the analysis of the activities developed by students in a virtual learning environment, from a sample of undergraduate students, approximately 7000 per year, over a period of five academic years, namely from 2009/2010 to 2013/2014. The main aims of this research work are to assess the evolution of activity logs in the virtual learning environment of a Portuguese public higher education institution, in order to fill possible gaps and to hold out the prospect of new forms of use of the environment. The results obtained from the data analysis show that overall, the number of accesses to the virtual learning environment increased over the five years under study. The most used tools were Resources, Messages and Assignments. The most frequent activities developed with these tools were respectively consulting information, sending messages and submitting assignments. The frequency of accesses to the virtual learning environment was characterized according to the number of accesses in the activity log. The data distribution was divided into five frequency categories named very low, low, moderate, high and very high, determined by the percentiles 20, 40, 60, 80 and 100, respectively. The study of activity logs of virtual learning environments is important not only because they provide real knowledge of the use that undergraduates make of these environments, but also because of the possibilities they create regarding the identification of a need for new pedagogical approaches or a reinforcement of previously consolidated approaches.

Integrating science and management through collaborative learning and better information management

Achieving more sustainable land and water use depends on high-quality information and its improved use. In other words, better linkages are needed between science and management. Since many stakeholders with different relationships to the natural resources are inevitably involved, we suggest that collaborative learning environments and improved information management are prerequisites for integrating science and management. Case studies that deal with resource management issues are presented that illustrate the creation of collaborative learning environments through systems analyses with communities, and an integration of scientific and experiential knowledge of components of the system. This new knowledge needs to be captured and made accessible through innovative information management systems designed collaboratively with users, in forms which fit the users' 'mental models' of how their systems work. A model for linking science and resource management more effectively is suggested. This model entails systems thinking in a collaborative learning environment, and processes to help convergence of views and value systems, and make scientists and different kinds of managers aware of their interdependence. Adaptive management provides a mechanism for applying and refining scientists' and managers' knowledge. Copyright (C) 2003 John Wiley Sons, Ltd.

Meaningful Interaction in Virtual Learning Environments

There is still a great deal of opportunity for research on contextual interactive immersion in virtual heritage environments. The general failure of virtual environment technology to create engaging and educational experiences may be attributable not just to deficiencies in technology or in visual fidelity, but also to a lack of contextual and performative-based interaction, such as that found in games. However, there is little written so far on exactly how game-style interaction can help improve virtual learning environments.

Politeness in computer-mediated discourse of a virtual team

Drawing on the newest findings of politeness research, this paper proposes an interactionally grounded approach to computer-mediated discourse (CMD). Through the analysis of naturally occurring text-based synchronous interactions of a virtual team the paper illustrates that the interactional politeness approach can account for linguistic phenomena not yet fully explored in computer-mediated discourse analysis. Strategies used for compensating for the lack of audio-visual information in computer-mediated communication, strategies to compensate for the technological constraints of the medium, and strategies to aid interaction management are examined from an interactional politeness viewpoint and compared to the previous findings of CMD analysis. The conclusion of this preliminary research suggests that the endeavour to communicate along the lines of politeness norms in a work-based virtual environment contradicts some of the previous findings of CMD research (unconventional orthography, capitalization, economizing), and that other areas (such as emoticons, backchannel signals and turn-taking strategies) need to be revisited and re-examined from an interactional perspective to fully understand how language functions in this merely text-based environment.

Knowledge processes in virtual teams:consolidating the evidence

This article takes stock of the current state of research on knowledge processes in virtual teams (VTs) and consolidates the extent research findings. Virtual teams, on the one hand, constitute important organisational entities that facilitate the integration of diverse and distributed knowledge resources. On the other hand, collaborating in a virtual environment creates particular challenges for the knowledge processes. The article seeks to consolidate the diverse evidence on knowledge processes in VTs with a specific focus on identifying the factors that influence the effectiveness of these knowledge processes. The article draws on the four basic knowledge processes outlined by Alavi and Leidner (2001) (i.e. creation, transferring, storage/retrieval and application) to frame the investigation and discuss the extent research. The consolidation of the existing research findings allows us to recognise the gaps in the understanding of knowledge processes in VTs and identify the important avenues for future research.

Virtual Environments as an Education Tool for Digital Natives

Report published in the Proceedings of the National Conference on "Education in the Information Society", Plovdiv, May, 2013

Atividade eletroencefalográfica de pacientes com acidente vascular cerebral na aprendizagem motora de um jogo baseado em realidade virtual

Stroke is the leading cause of long-term disability among adults and motor relearning is essential in motor sequelae recovery. Therefore, various techniques have been proposed to achieve this end, among them Virtual Reality. The aim of the study was to evaluate electroencephalographic activity of stroke patients in motor learning of a virtual reality-based game. The study included 10 patients with chronic stroke, right-hande; 5 with left brain injury (LP), mean age 48.8 years (± 4.76) and 5 with injury to the right (RP), mean age 52 years (± 10.93). Participants were evaluated for electroencephalographic (EEG) activity and performance while performing 15 repetitions of darts game in XBOX Kinect and also through the NIHSS, MMSE, Fugl-Meyer and the modified Ashworth scale. Patients underwent a trainning with 45 repetitions of virtual darts game, 12 sessions in four weeks. After training, patients underwent reassessment of EEG activity and performance in virtual game of darts (retention). Data were analyzed using ANOVA for repeated measures. According to the results, there were differences between the groups (PD and PE) in frequencies Low Alpha (p = 0.0001), High Alpha (p = 0.0001) and Beta (p = 0.0001). There was an increase in alpha activation powers and a decrease in beta in the phase retention of RP group. In LP group was observed increased alpha activation potency, but without decrease in beta activation. Considering the asymmetry score, RP group increased brain activation in the left hemisphere with the practice in the frontal areas, however, LP group had increased activation of the right hemisphere in fronto-central areas, temporal and parietal. As for performance, it was observed a decrease in absolute error in the game for RP group between assessment and retention (p = 0.015), but this difference was not observed for LP group (p = 0.135). It follows then that the right brain injury patients benefited more from darts game training in the virtual environment with respect to the motor learning process, reducing neural effort in ipsilesionais areas and errors with the practice of the task. In contrast, patients with lesions in left hemisphere decrease neural effort in contralesionais areas important for motor learning and showed no performance improvements with practice of 12 sessions of virtual dart game. Thus, the RV can be used in rehabilitation of stroke patients upper limb, but the laterality of the injury should be considered in programming the motor learning protocol.

A Formação de professores nas tramas do virtual

This study aims to reflect on the cultural and aesthetics formation of teacher, and how they act as a co-author in the virtual environment. The reflection permeates on topics such as: The Information Age and the challenges of the teacher in the twenty-first century; teacher professional development and the multiple personal identities; the importance of cultural repertoire for teaching practice and the role of the teacher as co-author in the informational network. In addition to the theoretical reflections were conducted two focus groups with the participation of teachers with different graduations and working in various levels of education to discuss the presented topics. It was proposed to create a website for the teacher to sail and collaborate with posts on many cultural artifacts. For the construction of the content for the site, it developed a “daily creation”, which is the search information storage from multiple sources, such as academic papers, songs, websites, magazines, comics, blogs, books, photographs, advertisements, finally everything that can increase imagination and serve for the production of content. Data analysis of the focus group showed that teachers recognize the varied cultural repertoire makes for a good professional aplomb, but cannot actively participate in the local culture. It was also found that the teacher has difficulty manipulating information technology and communication and therefore, distance themselves from an active production network. The focus group contributed to building a website and posts on cultural artifacts. Production can be accessed at www.digitaldoprofessor.com.

Crowdsourcing User-Contributed Solutions to Aerospace Product Development Issues through Micro-Blogging

Revenue and production output of the United Kingdom’s Aerospace Industry (AI) is growing year on year and the need to develop new products and innovative enhancements to existing ranges is creating a critical need for the increased utilisation and sharing of employee knowledge. The capture of employee knowledge within the UK’s AI is vital if it is to retain its pre-eminent position in the global marketplace. Crowdsourcing, as a collaborative problem solving activity, allows employees to capture explicit knowledge from colleagues and teams and also offers the potential to extract previously unknown tacit knowledge in a less formal virtual environment. By using micro-blogging as a mechanism, a conceptual framework is proposed to illustrate how companies operating in the AI may improve the capture of employee knowledge to address production-related problems through the use of crowdsourcing. Subsequently, the framework has been set against the background of the product development process proposed by Maylor in 1996 and illustrates how micro-blogging may be used to crowdsource ideas and solutions during product development. Initial validation of the proposed framework is reported, using a focus group of 10 key actors from the collaborating organisation, identifying the perceived advantages, disadvantages and concerns of the framework; results indicate that the activity of micro-blogging for crowdsourcing knowledge relating to product development issues would be most beneficial during product conceptualisation due to the requirement for successful innovation.

Competency Based Assessment Using Virtual Reality (VERT): Is It a Realistic Possibility ?

The education of the radiography profession is based within higher education establishments, yet a critical part of all radiography programmes is the clinical component where students learn the practical skills of the profession. Assessments therefore not only have to assess a student’s knowledge, but also their clinical competence and core skills in line with both Health and Care Professions Council and the Society and College of Radiographers requirements. This timely thesis examines the possibility of using the Virtual Environment for RadioTherapy (VERT) as an assessment tool to evaluate a student’s competence so giving the advantage of a standard assessment and relieving time pressures in the clinical department. A mixed methods approach was taken which can be described as a Quantitative Qualitative design with the emphasis being on the Quantitative element; a so called QUAN  qual design. The quantitative evaluation compared two simulations, one in the virtual reality environment and another in the department using a real treatment machine. Students were asked to perform two electron setups in each simulation; the order being randomly decided and so the study would be described as a randomised cross-over design. Following this, qualitative data was collected in student focus groups to explore student perspectives in more depth. Findings indicated that the performance between the two simulators was significantly different, p < 0∙001; the virtual simulation scoring significantly lower than the hospital based simulation overall and in virtually all parameters being assessed. Thematic analysis of the qualitative data supported this finding and identified 4 main themes; equipment use, a lack of reality, learning opportunities and assessment of competence. One other sub-theme identified for reality was that of the environment and senses.

SMILE: Simulator for Maryland Imitation Learning Environment

As robot imitation learning is beginning to replace conventional hand-coded approaches in programming robot behaviors, much work is focusing on learning from the actions of demonstrators. We hypothesize that in many situations, procedural tasks can be learned more effectively by observing object behaviors while completely ignoring the demonstrator's motions. To support studying this hypothesis and robot imitation learning in general, we built a software system named SMILE that is a simulated 3D environment. In this virtual environment, both a simulated robot and a user-controlled demonstrator can manipulate various objects on a tabletop. The demonstrator is not embodied in SMILE, and therefore a recorded demonstration appears as if the objects move on their own. In addition to recording demonstrations, SMILE also allows programing the simulated robot via Matlab scripts, as well as creating highly customizable objects for task scenarios via XML. This report describes the features and usages of SMILE.

Vulnerabilidad de las consumidoras adolescentes: un estudio en un entorno virtual

El principal objetivo de este estudio fue investigar lo que produce la vulnerabilidad de las consumidoras adolescentes en un ambiente virtual. Se eligió un enfoque cualitativo, utilizando como método la investigación documental. Los datos fueron recolectados en el entorno virtual de la Revista Capricho, específicamente en las secciones de Moda y Belleza entre enero de 2013 y junio de 2014. Los resultados de la investigación identificaron como factores agravantes de la vulnerabilidad de las consumidoras adolescentes: el género; autoconcepto; condición socioeconómica; la falta de conocimiento y la poca experiencia en el consumo; motivación; el estigma y la discriminación; las normas de la subcultura adolescente; el exceso de información; y el uso excesivo de internet. Las características de vulnerabilidad más relevantes fueron: no tienen confianza en términos de autoimagen; materialismo; inseguridad; perdida de bienestar; incapacidad de resistir a las presiones de grupo; estado de confusión y vicio en internet