Respuesta fisiológica, productiva y cualitativa del cultivar Syrah (Vitis vinifera L) con diferentes frecuencias de riego y densidad de goteros en suelos arcillosos

La disponibilidad hídrica es uno de los principales factores que determinan el rendimiento del viñedo en muchas regiones vitícolas, por lo que sus consecuencias han sido ampliamente estudiadas. Sin embargo, para una cantidad de agua de riego determinada, otros aspectos como la frecuencia de aplicación, o la combinación entre el caudal de los goteros y la distancia entre los mismos (es decir, el patrón de distribución de agua en el suelo), pueden jugar un papel relevante, pero estos factores han sido poco estudiados. El objetivo de este trabajo ha sido evaluar las implicaciones agronómicas y fisiológicas de dos frecuencias de riego (IrrF, cada 2 y 4 días) y dos patrones de distribución de agua (DisP, goteros de 2 L h-1 separados 0,6 m vs. goteros de 4 L h-1 separados 1,2 m). El experimento se llevó a cabo durante cuatro temporadas consecutivas en un viñedo cv. Syrah con un suelo arcilloso en el centro de España, y los dos factores fueron evaluados bajo dos condiciones de disponibilidad hídrica (Baja: 20% de ETo y Media: 40% de ETo). El efecto de la frecuencia de riego y el patrón de distribución de agua en la respuesta agronómica del cv. Syrah se ha estudiado en el capítulo 1. La frecuencia de riego y el patrón de distribución de agua en el suelo afectaron a algunos aspectos de los componentes de rendimiento y desarrollo vegetativo en las dos condiciones de disponibilidad hídrica, aunque los efectos observados no fueron los mismos todos los años. Los efectos fueron más evidentes para IrrF en condiciones de baja disponibilidad hídrica y para DisP en condiciones de disponibilidad hídrica media. Dos de los cuatro años del experimento, el pasar de frecuencia de riego de 2 días a 4 días causó un incremento medio de rendimiento del 20% para la situación de baja disponibilidad hídrica. La textura del suelo, sin duda ha condicionado los resultados obtenidos en los tratamientos regados con el 20% de la ETo, ya que regar cada dos días implicaba la aplicación de pequeñas cantidades de agua y se formaban bulbos de riego superficiales, probablemente favoreciendo las pérdidas por evaporación. En el capítulo 2, se ha analizado el efecto de la frecuencia de riego y del patrón de distribución de agua en el estado hídrico de la planta y el intercambio gaseoso a nivel de hoja con el fin de explicar las diferencias observadas en la respuesta agronómica. En lo que respecta a la frecuencia de riego, en condiciones de baja disponibilidad hídrica, las plantas regadas cada 4 días (plantas 4d), mostraron mayores tasas de asimilación neta y conductancia estomática que las plantas regadas cada 2 días (plantas 2d), lo que es consistente con la hipótesis de que con la frecuencia de riego de 2 días se produjo una pérdida de eficiencia del uso del agua, probablemente debido a una mayor evaporación como consecuencia del hecho de que el volumen de suelo mojado creado era pequeño y cerca de la superficie. En condiciones de disponibilidad hídrica media, las diferencias en el intercambio gaseoso a nivel de hoja fueron mucho más pequeñas. Al comienzo del verano cada frecuencia de riego se comportó mejor uno de los días de medida, compensando al final del ciclo de riego de 4 días. Sin embargo, a medida que avanzó el verano y el déficit de agua se hizo más alto, las diferencias significativas aparecieron sólo en el 'día 4' del ciclo de riego, cuando las plantas 2d se comportaron mejor que las plantas regadas 4d que llevaban tres días sin regarse. Estas diferencias fisiológicas fueron menores que en condiciones de baja disponibilidad hídrica y al parecer no suficientes para afectar el comportamiento agronómico. En cuanto al patrón de distribución de agua, el efecto fue poco significativo, pero la mayor densidad de goteros tendió a presentar un mayor intercambio gaseoso a nivel de hoja, especialmente a media mañana. El efecto fue más importante para las condiciones de disponibilidad hídrica media. En el capítulo 3, se han comparado las relaciones entre el intercambio gaseoso a nivel de hoja, el estado hídrico y la demanda atmosférica, con el fin de explicar los cambios en la intensidad de la respuesta fisiológica observados en el Capítulo 2. No se han encontrado diferencias en dichas relaciones para el patrón de distribución de agua, por lo que sólo se ha analizado el efecto de la frecuencia de riego. El estudio se ha centrado fundamentalmente en si las plantas mostraron una respuesta fisiológica diferente a los cambios en el estado hídrico y en la demanda atmosférica según el tiempo transcurrido desde el último riego. Las diferencias observadas explican los resultados obtenidos en los capítulos anteriores, y sugieren la existencia de procesos de aclimatación vinculados a la frecuencia de riego y a la disponibilidad hídrica. Las plantas bajo condiciones de baja disponibilidad hídrica se mostraron más aclimatadas al estrés hídrico que aquellas en condiciones de disponibilidad hídrica media. La frecuencia de riego afectó claramente la relación entre los parámetros de intercambio gaseoso a nivel de hoja, el estado hídrico de la planta y las condiciones atmosféricas, y junto con la cantidad de agua aplicada tuvo implicaciones en el desarrollo de mecanismos de aclimatación que afectaron a la respuesta fisiológica de la planta, afectando a la eficiencia del riego. ABSTRACT Water availability is one of the major factors that determine vineyard performance in many grape growing regions, so its implications have been widely studied before. However, for a given irrigation water amount, other aspects such as application frequency, or emitter spacing and flow rate (i.e., distribution pattern), may play a relevant role, but these factors have been scarcely studied. The aim of this work was to evaluate the agronomic and physiological implications of two irrigation frequencies (IrrF, every 2 and 4 days) and two water distribution patterns (DisP, 2 L h−1 emitters every 0.6 m vs. 4 L h−1 emitters every 1.2 m). The experiment was carried out during four consecutive seasons in a cv. Syrah vineyard with a clay soil in central Spain, and the two factors were evaluated under two water availability conditions (LOW WA: 20% of ETo and MEDIUM WA: 40% of ETo). The effect of irrigation frequency and water distribution pattern on the agronomical response of cv. Syrah was studied in Chapter 1. IrrF and DisP affected some aspects of vegetative development and yield components under both water availability conditions, although the effects observed were not the same every year. The effects were more evident for IrrF under low water availability and for DisP under medium water availability. Two out of the four years of the experiment, the change of irrigation frequency from 2 days to 4 days promoted an average yield increase of 20% for the LOW WA situation. Soil texture certainly conditioned the results obtained under LOW WA conditions, since high frequency irrigation implied applying small amounts of water that resulted in limited superficial water bulbs, which probably favored water evaporation. In Chapter 2, the effect of irrigation frequency and water distribution pattern on plant water status and leaf gas exchange was analyzed to explain the differences observed in the agronomical response. Concerning irrigation frequency, under LOW WA conditions, applying irrigation every 4 days, resulted in higher net assimilation rates and stomatal conductance than doing it every 2 days, supporting the hypothesis that the latter frequency resulted in a water use efficiency loss, probably due to higher evaporation as a consequence of the fact the wetted soil volume created was small and close to the surface. Under MEDIUM WA conditions, differences in leaf gas exchange were much smaller. At the beginning of the summer each irrigation frequency behaved better one of the measurements days, compensating at the end of the 4-day irrigation cycle. However, as the summer progressed and water deficit became higher, significant differences appeared only on ‘day 4’ of the irrigation cycle, when 2d plants behaved better than 4d plants. These physiological differences were smaller than under LOW WA conditions and apparently not sufficient to affect agronomical performance. Regarding water distribution pattern, the effect was less significant but the closest emitter spacing resulted in general terms in a higher leaf gas exchange, especially at midmorning. The effect was more noticeable for MEDIUM WA conditions. In Chapter 3, the relationships between leaf gas exchange and leaf water status and atmospheric demand were compared to explain the changes in the intensity of the physiological response observed in Chapter 2. No differences were found in the relationships for water distribution pattern, so only the effect of irrigation frequency was analyzed focusing on whether the plants have a different physiological response to changes in water status and atmospheric demand according to the time elapsed since the last irrigation. Differences observed in the relationships explained the results obtained in the previous chapters, and point at the occurrence of acclimation processes linked to irrigation frequency and to water availability. Plants under LOW WATER AVAILABILITY conditions seemed to be more acclimated to water stress than those under MEDIUM WATER AVAILABILITY conditions. Irrigation frequency clearly affected the relationship between leaf gas exchange parameters, plant water status and atmospheric conditions, and together with the amount of water applied had implications in the development of acclimation mechanisms that affected plant physiological response, thus affecting irrigation efficiency.

Contribución a la localización en interiores basada en comunicaciones inalámbricas

Determinar con buena precisión la posición en la que se encuentra un terminal móvil, cuando éste se halla inmerso en un entorno de interior (centros comerciales, edificios de oficinas, aeropuertos, estaciones, túneles, etc), es el pilar básico sobre el que se sustentan un gran número de aplicaciones y servicios. Muchos de esos servicios se encuentran ya disponibles en entornos de exterior, aunque los entornos de interior se prestan a otros servicios específicos para ellos. Ese número, sin embargo, podría ser significativamente mayor de lo que actualmente es, si no fuera necesaria una costosa infraestructura para llevar a cabo el posicionamiento con la precisión adecuada a cada uno de los hipotéticos servicios. O, igualmente, si la citada infraestructura pudiera tener otros usos distintos, además del relacionado con el posicionamiento. La usabilidad de la misma infraestructura para otros fines distintos ofrecería la oportunidad de que la misma estuviera ya presente en las diferentes localizaciones, porque ha sido previamente desplegada para esos otros usos; o bien facilitaría su despliegue, porque el coste de esa operación ofreciera un mayor retorno de usabilidad para quien lo realiza. Las tecnologías inalámbricas de comunicaciones basadas en radiofrecuencia, ya en uso para las comunicaciones de voz y datos (móviles, WLAN, etc), cumplen el requisito anteriormente indicado y, por tanto, facilitarían el crecimiento de las aplicaciones y servicios basados en el posicionamiento, en el caso de poderse emplear para ello. Sin embargo, determinar la posición con el nivel de precisión adecuado mediante el uso de estas tecnologías, es un importante reto hoy en día. El presente trabajo pretende aportar avances significativos en este campo. A lo largo del mismo se llevará a cabo, en primer lugar, un estudio de los principales algoritmos y técnicas auxiliares de posicionamiento aplicables en entornos de interior. La revisión se centrará en aquellos que sean aptos tanto para tecnologías móviles de última generación como para entornos WLAN. Con ello, se pretende poner de relieve las ventajas e inconvenientes de cada uno de estos algoritmos, teniendo como motivación final su aplicabilidad tanto al mundo de las redes móviles 3G y 4G (en especial a las femtoceldas y small-cells LTE) como al indicado entorno WLAN; y teniendo siempre presente que el objetivo último es que vayan a ser usados en interiores. La principal conclusión de esa revisión es que las técnicas de triangulación, comúnmente empleadas para realizar la localización en entornos de exterior, se muestran inútiles en los entornos de interior, debido a efectos adversos propios de este tipo de entornos como la pérdida de visión directa o los caminos múltiples en el recorrido de la señal. Los métodos de huella radioeléctrica, más conocidos bajo el término inglés “fingerprinting”, que se basan en la comparación de los valores de potencia de señal que se están recibiendo en el momento de llevar a cabo el posicionamiento por un terminal móvil, frente a los valores registrados en un mapa radio de potencias, elaborado durante una fase inicial de calibración, aparecen como los mejores de entre los posibles para los escenarios de interior. Sin embargo, estos sistemas se ven también afectados por otros problemas, como por ejemplo los importantes trabajos a realizar para ponerlos en marcha, y la variabilidad del canal. Frente a ellos, en el presente trabajo se presentan dos contribuciones originales para mejorar los sistemas basados en los métodos fingerprinting. La primera de esas contribuciones describe un método para determinar, de manera sencilla, las características básicas del sistema a nivel del número de muestras necesarias para crear el mapa radio de la huella radioeléctrica de referencia, junto al número mínimo de emisores de radiofrecuencia que habrá que desplegar; todo ello, a partir de unos requerimientos iniciales relacionados con el error y la precisión buscados en el posicionamiento a realizar, a los que uniremos los datos correspondientes a las dimensiones y realidad física del entorno. De esa forma, se establecen unas pautas iniciales a la hora de dimensionar el sistema, y se combaten los efectos negativos que, sobre el coste o el rendimiento del sistema en su conjunto, son debidos a un despliegue ineficiente de los emisores de radiofrecuencia y de los puntos de captura de su huella. La segunda contribución incrementa la precisión resultante del sistema en tiempo real, gracias a una técnica de recalibración automática del mapa radio de potencias. Esta técnica tiene en cuenta las medidas reportadas continuamente por unos pocos puntos de referencia estáticos, estratégicamente distribuidos en el entorno, para recalcular y actualizar las potencias registradas en el mapa radio. Un beneficio adicional a nivel operativo de la citada técnica, es la prolongación del tiempo de usabilidad fiable del sistema, bajando la frecuencia en la que se requiere volver a capturar el mapa radio de potencias completo. Las mejoras anteriormente citadas serán de aplicación directa en la mejora de los mecanismos de posicionamiento en interiores basados en la infraestructura inalámbrica de comunicaciones de voz y datos. A partir de ahí, esa mejora será extensible y de aplicabilidad sobre los servicios de localización (conocimiento personal del lugar donde uno mismo se encuentra), monitorización (conocimiento por terceros del citado lugar) y seguimiento (monitorización prolongada en el tiempo), ya que todos ellas toman como base un correcto posicionamiento para un adecuado desempeño. ABSTRACT To find the position where a mobile is located with good accuracy, when it is immersed in an indoor environment (shopping centers, office buildings, airports, stations, tunnels, etc.), is the cornerstone on which a large number of applications and services are supported. Many of these services are already available in outdoor environments, although the indoor environments are suitable for other services that are specific for it. That number, however, could be significantly higher than now, if an expensive infrastructure were not required to perform the positioning service with adequate precision, for each one of the hypothetical services. Or, equally, whether that infrastructure may have other different uses beyond the ones associated with positioning. The usability of the same infrastructure for purposes other than positioning could give the opportunity of having it already available in the different locations, because it was previously deployed for these other uses; or facilitate its deployment, because the cost of that operation would offer a higher return on usability for the deployer. Wireless technologies based on radio communications, already in use for voice and data communications (mobile, WLAN, etc), meet the requirement of additional usability and, therefore, could facilitate the growth of applications and services based on positioning, in the case of being able to use it. However, determining the position with the appropriate degree of accuracy using these technologies is a major challenge today. This paper provides significant advances in this field. Along this work, a study about the main algorithms and auxiliar techniques related with indoor positioning will be initially carried out. The review will be focused in those that are suitable to be used with both last generation mobile technologies and WLAN environments. By doing this, it is tried to highlight the advantages and disadvantages of each one of these algorithms, having as final motivation their applicability both in the world of 3G and 4G mobile networks (especially in femtocells and small-cells of LTE) and in the WLAN world; and having always in mind that the final aim is to use it in indoor environments. The main conclusion of that review is that triangulation techniques, commonly used for localization in outdoor environments, are useless in indoor environments due to adverse effects of such environments as loss of sight or multipaths. Triangulation techniques used for external locations are useless due to adverse effects like the lack of line of sight or multipath. Fingerprinting methods, based on the comparison of Received Signal Strength values measured by the mobile phone with a radio map of RSSI Recorded during the calibration phase, arise as the best methods for indoor scenarios. However, these systems are also affected by other problems, for example the important load of tasks to be done to have the system ready to work, and the variability of the channel. In front of them, in this paper we present two original contributions to improve the fingerprinting methods based systems. The first one of these contributions describes a method for find, in a simple way, the basic characteristics of the system at the level of the number of samples needed to create the radio map inside the referenced fingerprint, and also by the minimum number of radio frequency emitters that are needed to be deployed; and both of them coming from some initial requirements for the system related to the error and accuracy in positioning wanted to have, which it will be joined the data corresponding to the dimensions and physical reality of the environment. Thus, some initial guidelines when dimensioning the system will be in place, and the negative effects into the cost or into the performance of the whole system, due to an inefficient deployment of the radio frequency emitters and of the radio map capture points, will be minimized. The second contribution increases the resulting accuracy of the system when working in real time, thanks to a technique of automatic recalibration of the power measurements stored in the radio map. This technique takes into account the continuous measures reported by a few static reference points, strategically distributed in the environment, to recalculate and update the measurements stored into the map radio. An additional benefit at operational level of such technique, is the extension of the reliable time of the system, decreasing the periodicity required to recapture the radio map within full measurements. The above mentioned improvements are directly applicable to improve indoor positioning mechanisms based on voice and data wireless communications infrastructure. From there, that improvement will be also extensible and applicable to location services (personal knowledge of the location where oneself is), monitoring (knowledge by other people of your location) and monitoring (prolonged monitoring over time) as all of them are based in a correct positioning for proper performance.

Optimizing phosphorus diffusion for photovoltaic applications: peak doping, inactive phosphorus,gettering, and contact formation

The phosphosilicate glass (PSG), fabricated by tube furnace diffusion using a POCl3 source, is widely used as a dopant source in the manufacturing of crystalline silicon solar cells. Although it has been a widely addressed research topic for a long time, there is still lack of a comprehensive understanding of aspects such as the growth, the chemical composition, possible phosphorus depletion, the resulting in-diffused phosphorus profiles, the gettering behavior in silicon, and finally the metal-contact formation. This paper addresses these different aspects simultaneously to further optimize process conditions for photovoltaic applications. To do so, a wide range of experimental data is used and combined with device and process simulations, leading to a more comprehensive interpretation. The results show that slight changes in the PSG process conditions can produce high-quality emitters. It is predicted that PSG processes at 860 °C for 60 min in combination with an etch-back and laser doping from PSG layer results in high-quality emitters with a peak dopant density Npeak = 8.0 × 1018 cm−3 and a junction depth dj = 0.4 μm, resulting in a sheet resistivityρsh = 380 Ω/sq and a saturation current-density J0 below 10 fA/cm2. With these properties, the POCl3 process can compete with ion implantation or doped oxide approaches.

AS INOVAÇÕES TECNOLÓGICAS E OS INTERMEDIÁRIOS DA PRODUÇÃO E DO ACESSO À INFORMAÇÃO JORNALÍSTICA

O jornalismo é um dos principais meios de oferta de temas para a discussão e formação da opinião pública, porém depende de um sistema técnico para ser transmitido. Durante mais de cem anos as informações produzidas pela imprensa foram emitidas, armazenadas, transmitidas e recebidas pelos chamados veículos de comunicação de massa que utilizam a rede centralizada cujas características estão na escassez material, produção em série e massificação. Esse sistema separa no tempo e no espaço emissores e receptores criando uma relação desigual de força em que as grandes empresas controlaram o fluxo informativo, definindo quais fatos seriam veiculados como notícia. Em 1995, a internet cuja informação circula sob a tecnologia da rede distribuída, foi apropriada pela sociedade, alterando a forma de produção, armazenamento e transmissão de informação. A tecnologia despertou a esperança de que esta ferramenta poderia proporcionar uma comunicação mais dialógica e democrática. Mas aos poucos pode-se perceber novas empresas se apropriando da tecnologia da rede distribuída sob a qual circula a internet, gerando um novo controle do fluxo informativo. Realizou-se nessa pesquisa um levantamento bibliográfico para estabelecer uma reflexão crítica dos diferentes intermediários entre fato e a notícia tanto da rede centralizada como na rede distribuída, objetivando despertar uma discussão que possa oferecer novas ideias para políticas, bem como alternativas para uma comunicação mais democrática e mais libertária.

Estudo de metodologias de controle de qualidade do Mo-99 utilizado no preparo de geradores de Mo-99/Tc-99m

O 99mTc é o radionuclídeo mais utilizado em medicina nuclear. No Brasil os geradores de 99Mo/99mTc são produzidos exclusivamente pelo Centro de Radiofarmácia do IPEN-CNEN/SP, com 99Mo importado de diferentes fornecedores. O 99Mo (t1/2 = 66 h), por ser um produto de fissão do 235U, pode conter impurezas radionuclídicas prejudiciais à saúde humana. Dessa forma, para que o gerador seja utilizado de forma segura, é necessário que o 99Mo seja avaliado por ensaios de controle de qualidade e atenda à alguma especificação descrita em farmacopeia. A Farmacopeia Europeia (FE) apresenta monografia, com parâmetros (identificação, pureza radioquímica e pureza radionuclídica), métodos de análise, e limites, para avaliação da qualidade da solução de [99Mo] na forma de molibdato de sódio, que é utilizada como matéria-prima no preparo dos geradores de 99Mo/99mTc. No entanto, observa-se uma dificuldade na implementação e execução dos métodos por parte dos produtores de geradores, com pouca literatura sobre o assunto, provavelmente devido à falta de praticidade dos métodos propostos e à extensa lista de reagentes utilizados. Nesse trabalho foram avaliados vários parâmetros de qualidade do 99Mo descritos na monografia da FE. Foram estudados métodos de separação do 99Mo de suas impurezas radionuclídicas por extração em fase sólida (SPE) e por TLC. Após separação por SPE, foi proposta a quantificação de metais por ICP-OES para avaliar a porcentagem de retenção de Mo e a porcentagem de recuperação de Ru e Te e Sr em diversos tipos de cartuchos, em substituição ao uso de radiotraçadores. Observou-se que a marca de cartucho de SPE para separação do 99Mo recomendada pela FE apresentou baixa recuperação para Ru, quando comparado aos outros cartuchos de troca aniônica disponíveis no mercado. Amostras de 99Mo de diferentes fornecedores mundiais foram analisadas. Observou-se que é possível realizar a quantificação de 103Ru em amostras de 99Mo mesmo com tempos de decaimento acima de 4 semanas. Um método alternativo de separação do 99Mo do 131I por TLC apresentou resultados promissores. Não foi feita a quantificação das impurezas radionuclídicas emissoras beta e alfa. Todas as amostras analisadas apresentaram resultados dentro das especificações da FE para pureza radioquímica (>95%) e pureza radionuclídica.

Episodic star formation in a group of LAEs at z=5.07

We are undertaking a search for high-redshift low-luminosity Lyman Alpha sources in the SHARDS (Survey for High-z Absorption Red and Dead Sources) survey. Among the pre-selected Lyman Alpha sources two candidates were spotted, located 3.19 arcsec apart, and tentatively at the same redshift. Here, we report on the spectroscopic confirmation with Gran Telescopio Canarias of the Lyman Alpha emission from this pair of galaxies at a confirmed spectroscopic redshifts of z=5.07. Furthermore, one of the sources is interacting/merging with another close companion that looks distorted. Based on the analysis of the spectroscopy and additional photometric data, we infer that most of the stellar mass of these objects was assembled in a burst of star formation 100 Myr ago. A more recent burst (2 Myr old) is necessary to account for the measured Lyman Alpha flux. We claim that these two galaxies are good examples of Lyman Alpha sources undergoing episodic star formation. Besides, these sources very likely constitute a group of interacting Lyman Alpha emitters (LAEs).

Deep observation of the NGC1275 region with MAGIC: search of diffuse gamma-ray emission from cosmic rays in the Perseus cluster

Clusters of galaxies are expected to be reservoirs of cosmic rays (CRs) that should produce diffuse γ-ray emission due to their hadronic interactions with the intra-cluster medium. The nearby Perseus cool-core cluster, identified as the most promising target to search for such an emission, has been observed with the MAGIC telescopes at very-high energies (VHE, E ≥ 100 GeV) for a total of 253 hr from 2009 to 2014. The active nuclei of NGC 1275, the central dominant galaxy of the cluster, and IC 310, lying at about 0.6º from the centre, have been detected as point-like VHE γ-ray emitters during the first phase of this campaign. We report an updated measurement of the NGC 1275 spectrum, which is described well by a power law with a photon index Γ = 3.6 ± 0.2_(stat) ± 0.2_(syst) between 90 GeV and 1200 GeV. We do not detect any diffuse γ-ray emission from the cluster and so set stringent constraints on its CR population. To bracket the uncertainties over the CR spatial and spectral distributions, we adopt different spatial templates and power-law spectral indexes α. For α = 2.2, the CR-to-thermal pressure within the cluster virial radius is constrained to be ≤ 1 − 2%, except if CRs can propagate out of the cluster core, generating a flatter radial distribution and releasing the CR-to-thermal pressure constraint to ≤ 20%. Assuming that the observed radio mini-halo of Perseus is generated by secondary electrons from CR hadronic interactions, we can derive lower limits on the central magnetic field, B_(0), that depend on the CR distribution. For α = 2.2, B_(0) ≥ 5 − 8 µG, which is below the ∼25 µG inferred from Faraday rotation measurements, whereas for α ≤ 2.1, the hadronic interpretation of the diffuse radio emission contrasts with our γ-ray flux upper limits independently of the magnetic field strength.

Avaliação da interação entre o persulfato de potássio com solos brasileiros para a utilização da tecnologia de remediação por oxidação química in situ.

Recentemente, o uso de persulfato em processo de oxidação química in situ em áreas contaminadas por compostos orgânicos ganhou notoriedade. Contudo, a matriz sólida do solo pode interagir com o persulfato, favorecendo a formação de radicais livres, evitando o acesso do oxidante até o contaminante devido a oxidação de compostos reduzidos presentes no solo ou ainda pela alteração das propriedades hidráulicas do solo. Essa pesquisa teve como objetivos avaliar se as interações entre a solução de persulfato com três solos brasileiros poderiam eventualmente interferir sua capacidade de oxidação bem como se a interação entre eles poderia alterar as propriedades hidráulicas do solo. Para isso, foram realizados ensaios de oxidação do Latossolo Vermelho (LV), Latossolo Vermelho Amarelo (LVA) e Neossolo Quartzarênico (NQ) com solução de persulfato (1g/L e 14g/L) por meio de ensaios de batelada, bem como a oxidação do LV por solução de persulfato (9g/L e 14g/L) em colunas indeformadas. Os resultados mostraram que o decaimento do persulfato seguiu modelo de primeira ordem e o consumo do oxidante não foi finito. A maior constante da taxa de reação (kobs) foi observada para o reator com LV. Essa maior interação foi decorrente da diferença na composição mineralógica e área específica. A caulinita, a gibbsita e os óxidos de ferro apresentaram maior interação com o persulfato. A redução do pH da solução dos reatores causou a lixiviação do alumínio e do ferro devido a dissolução dos minerais. O ferro mobilizado pode ter participado como catalisador da reação, favorecendo a formação de radicais livres, mas foi o principal responsável pelo consumo do oxidante. Parte do ferro oxidado pode ter sido precipitado como óxido cristalino favorecendo a obstrução dos poros. Devido à maior relação entre massa de persulfato e massa de solo, a constante kobs obtida no ensaio com coluna foi 23 vezes maior do que a obtida no ensaio de batelada, mesmo utilizando concentração 1,5 vezes menor no ensaio com coluna. Houve redução na condutividade hidráulica do solo e o fluxo da água mostrou-se heterogêneo após a oxidação devido a mudanças na estrutura dos minerais. Para a remediação de áreas com predomínio de solos tropicais, especialmente do LV, pode ocorrer a formação de radicais livres, mas pode haver um consumo acentuado e não finito do oxidante. Verifica-se que o pH da solução não deve ser inferior a 5 afim de evitar a mobilização de metais para a água subterrânea e eventual obstrução dos poros por meio da desagregação dos grãos de argila.

Incorporating global positioning data in real time P2P audio/video streams for mobile devices

We propose an original method to geoposition an audio/video stream with multiple emitters that are at the same time receivers of the mixed signal. The achieved method is suitable for those comes where a list of positions within a designated area is encoded with a degree of precision adjusted to the visualization capabilities; and is also easily extensible to support new requirements. This method extends a previously proposed protocol, without incurring in any performance penalty.

P2P audio/video protocol with global positioning data in real time for mobile devices

In this paper, we propose an original method to geoposition an audio/video stream with multiple emitters that are at the same time receivers of the mixed signal. The obtained method is suitable when a list of positions within a known area is encoded with precision tailored to the visualization capabilities of the target device. Nevertheless, it is easily adaptable to new precision requirements, as well as parameterized data precision. This method extends a previously proposed protocol, without incurring in any performance penalty.

Sensor scheduling in electronic support using Markov chains

In electronic support, receivers must maintain surveillance over the very wide portion of the electromagnetic spectrum in which threat emitters operate. A common approach is to use a receiver with a relatively narrow bandwidth that sweeps its centre frequency over the threat bandwidth to search for emitters. The sequence and timing of changes in the centre frequency constitute a search strategy. The search can be expedited, if there is intelligence about the operational parameters of the emitters that are likely to be found. However, it can happen that the intelligence is deficient, untrustworthy or absent. In this case, what is the best search strategy to use? A random search strategy based on a continuous-time Markov chain (CTMC) is proposed. When the search is conducted for emitters with a periodic scan, it is shown that there is an optimal configuration for the CTMC. It is optimal in the sense that the expected time to intercept an emitter approaches linearity most quickly with respect to the emitter's scan period. A fast and smooth approach to linearity is important, as other strategies can exhibit considerable and abrupt variations in the intercept time as a function of scan period. In theory and numerical examples, the optimum CTMC strategy is compared with other strategies to demonstrate its superior properties.

Modelling trickle irrigation: Comparison of analytical and numerical models for estimation of wetting front position with time

Irrigation practices that are profligate in their use of water have come under closer scrutiny by water managers and the public. Trickle irrigation has the propensity to increase water use efficiency but only if the system is designed to meet the soil and plant conditions. Recently we have provided a software tool, WetUp (http://www.clw.csiro.au/products/wetup/), to calculate the wetting patterns from trickle irrigation emitters. WetUp uses an analytical solution to calculate the wetted perimeter for both buried and surface emitters. This analytical solution has a number of assumptions, two of which are that the wetting front is defined by water content at which the hydraulic conductivity (K) is I mm day(-1) and that the flow occurs from a point source. Here we compare the wetting patterns calculated with a 2-dimensional numerical model, HYDRUS2D, for solving the water flow into typical soils with the analytical solution. The results show that the wetting patterns are similar, except when the soil properties result in the assumption of a point source no longer being a good description of the flow regime. Difficulties were also experienced with getting stable solutions with HYDRUS2D for soils with low hydraulic conductivities. (c) 2005 Elsevier Ltd. All rights reserved.

A propaganda de medicamentos de venda livre: um estudo do discurso e das questões éticas

A pesquisa identifica as características do discurso da propaganda de medicamentos de venda livre, analisando a relação entre o seu conteúdo, as questões éticas e as normas legais que orientam a comercialização desses medicamentos. O corpus de análise é constituído de 31 peças publicitárias de mídia impressa, de merchandising em pontos de venda PDVs, em campanhas de divulgação/comercialização de medicamentos de venda livre por um laboratório nacional EMS Sigma Pharma, e um multinacional Aventis Pharma. A metodologia de investigação é a Análise do Discurso subjacente às mensagens veiculadas nas peças de PDV, tendo como orientação os pressupostos dos teóricos de linha francesa, além dos fundamentos da propaganda e a legislação que a rege bem como os direitos do consumidor. A investigação mostra que a propaganda de medicamentos de venda livre, com seus argumentos altamente persuasivos a fim de seduzir o consumidor, não evidencia uma preocupação responsável com o consumidor e trata os medicamentos como quaisquer outros produtos, restringindo-se ao cumprimento das determinações legais em seus aspectos mínimos. Os princípios éticos e os valores sociais são ignorados, na maioria das peças, o que vale dizer que os emissores pecam por omissão na construção de seu discurso.

A study of field emission from cadmium sulphide

It was decided to investigate field emission from cadmium sulphide because many workers have found that the agreement between theory and experiment for this material, and other semiconductors, is poor. An electron energy analyser, similar to those used in most of the previously reported experiments, was, therefore, built. The performance of the analyser was thoroughly investigated both theoretically and practically and the results of these investigations were used in conjunction with a tungsten emitter. Excellent agreement was obtained between the usually accepted total energy distribution for tungsten and the corresponding .distribution measured with the present analyser. A method of obtaining reliable cadmium sulphide emitter was developed. These emitters were then used in the analyser and it was found that the agreement between theory and experiment was poor. Previous explanations of the lack of agreement are considered and are found to be doubtful. The theory of field emission from semiconductors is reviewed and possible reasons for the discrepancy between theory and experiment are proposed. Finally, further experiments are described which should prove or disprove the conclusions arrived at in this work.

A study of field emission from semiconductors

In an attempt to clarify the behaviour of semi-conductor field emitters the properties of a narrow band gap material were investigated. A retarding potential analyser was built and tested using a tungsten emitter. The energy distribution of electrons emitted from single crystals of lead telluride (band gap 0.3 eV) and gallium phosphide (band gap 2.26 eV) were measured. The halfwidths of the distributions are discussed with respect to the relevant parameters for the materials. Methods of tip preparation had to be developed. The halfwidth of the energy distribution of electrons field emitted from carbon fibres was measured to be 0.21 ± 0.01 eV. A mechanism explaining the long lifetime of the emitters in poor vacuua is proposed.