Caracterização de atapulgita visando aplicação para reforço de materiais poloméricos

The clay mineral attapulgite is a group of hormitas, which has its structures formed by microchannels, which give superior technological properties classified the industrial clays, clays of this group has a very versatile range of applications, ranging from the drilling fluid for wells oil has applications in the pharmaceutical industry. Such properties can be improved by activating acid and / or thermal activation. The attapulgite when activated can improve by up to 5-8 times some of its properties. The clay was characterized by X-ray diffraction, fluorescence, thermogravimetric analysis, differential thermal analysis, scanning electron microscopy and transmission electron microscopy before and after chemical activation. It can be seen through the results the efficiency of chemical treatment, which modified the clay without damaging its structure, as well as production of polymer matrix composites with particles dispersed atapugita

Desenvolvimento de um sistema misto de pasta à base de geopolímero e cimento portland para correção de perda de circulação

The materials engineering includes processes and products involving several areas of engineering, allowing them to prepare materials that fulfill the needs of various new products. In this case, this work aims to study a system composed of cement paste and geopolymers, which can contribute to solving an engineering problem that directly involves the exploitation of oil wells subject to loss of circulation. To correct it, has been already proposed the use of granular materials, fibers, reducing the drilling fluid or cement paste density and even surface and downhole mixed systems. In this work, we proposed the development of a slurry mixed system, the first was a cement-based slurry and the second a geopolymer-based slurry. The cement-based slurry was formulated with low density and extenders, 12.0 ppg (1.438 g/cm ³), showing great thixotropic characteristics. It was added nano silica at concentrations of 0.5, 1.0 and 1.5 gps (66.88, 133.76 and 200.64 L/m3) and CaCl2 at concentrations of 0.5, 1, 0 and 1.5%. The second system is a geopolymer-based paste formulated from molar ratios of 3.5 (nSiO2/nAl2O3), 0.27 (nK2O/nSiO2), 1.07 (nK2O/nAl2O3) and 13.99 (nH2O/nK2O). Finally, we performed a mixture of these two systems, for their application for correction of circulation lost. To characterize the raw materials, XRD, XRF, FTIR analysis and titration were performed. The both systems were characterized in tests based on API RP10B. Compressive strength tests were conducted after curing for 24 hours, 7 and 28 days at 58 °C on the cement-based system and the geopolymer-based system. From the mixtures have been performed mixability tests and micro structural characterizations (XRD, SEM and TG). The results showed that the nano silica, when combined with CaCl2 modified the rheological properties of the cement slurry and from the concentration of 1.5 gpc (200.64 L / m³) it was possible to obtain stable systems. The system mixture caused a change in the microstructure of the material by favoring the rate of geopolymer formation to hinder the C3S phase hydration, thus, the production of CSH phases and Portlandite were harmed. Through the mixability tests it can be concluded that the system, due to reduced setting time of the mixture, can be applied to plug lost circulation zones when mixed downhole

Síntese enzimática de ésteres de açúcar: surfactantes e polímeros como novos materiais ambientalmente seguros

Sugar esters are substances which possess surfactant, antifungical and bactericidal actions and can be obtained through two renewable sources of raw materials: sugars and vegetable oils. Their excellent biodegradability, allied to lhe fact that they are non toxic, insipid, inodorous, biocompatible, no-ionic, digestible and because they can resist to adverse conditions of temperature, pH and salinity, explain lhe crescent use of these substances in several sections of lhe industry. The objective of this thesis was to synthesize and characterize surfactants and polymers containing sugar branched in their structures, through enzymatic transesterification of vinyl esters and sugars, using alkaline protease from Bacillus subtilis as catalyst, in organic medium (DMF).Three types of sugars were used: L-arabinose, D-glucose and sucrose and two types of vinyl esters: vinyl laurate and vinyl adipate. Aiming to reach high conversions from substrates to products for a possible future large scale industrial production, a serie of variables was optimized, through Design of Experiments (DOE), using Response Surface Methodology (RSM).The investigated variables were: (1) enzyme concentration; (2) molar reason of substrates; (3) water/solvent rale; (4) temperature and (5) time. We obtained six distinct sugar esters: 5-0-lauroyl L-arabinose, 6-0-lauroyl D-glucose, 1'-O-lauroyl sucrose, 5-0-vinyladipoyl L-arabinose, 6-0-vinyladipoyl D-glucose and 1 '-O-vinyladipoyl sucrose, being lhe last three polymerizable. The progress of lhe reaction was monitored by HPLC analysis, through lhe decrease of sugar concentration in comparison to lhe blank. Qualitative analysis by TLC confirmed lhe formation of lhe products. In lhe purification step, two methodologies were adopted: (1) chromatographic column and (2) extraction with hot acetone. The acylation position and lhe chemical structure were determined by 13C-RMN. The polymerization of lhe three vinyl sugar esters was possible, through chemical catalysis, using H2O2 and K2S2O8 as initiators, at 60°C, for 24 hours. IR spectra of lhe monomers and respective polymers were compared revealing lhe disappearance of lhe vinyl group in lhe polymer spectra. The molar weights of lhe polymers were determined by GPC and presented lhe following results: poly (5-0-vinyladipoyl L-arabinose): Mw = 7.2 X 104; PD = 2.48; poly (6-0-vinyladipoyl D-glucose): Mw = 2.7 X 103; PD = 1.75 and poly (1'-O-vinyladipoyl sucrose): Mw = 4.2 X 104; PD = 6.57. The six sugar esters were submitted to superficial tension tests for determination of the critical micelle concentrations (CMC), which varied from 122 to 167 ppm. Finally, a study of applicability of these sugar esters, as lubricants for completion fluids of petroleum wells was' accomplished through comparative analysis of lhe efficiency of these sugar esters, in relation to three commercial lubricants. The products synthesized in this thesis presented equivalent or superior action to lhe tested commercial products

Modelagem analítica e experimental da filtração em meios porosos

Deep bed filtration occurs in several industrial and environmental processes like water filtration and soil contamination. In petroleum industry, deep bed filtration occurs near to injection wells during water injection, causing injectivity reduction. It also takes place during well drilling, sand production control, produced water disposal in aquifers, etc. The particle capture in porous media can be caused by different physical mechanisms (size exclusion, electrical forces, bridging, gravity, etc). A statistical model for filtration in porous media is proposed and analytical solutions for suspended and retained particles are derived. The model, which incorporates particle retention probability, is compared with the classical deep bed filtration model allowing a physical interpretation of the filtration coefficients. Comparison of the obtained analytical solutions for the proposed model with the classical model solutions allows concluding that the larger the particle capture probability, the larger the discrepancy between the proposed and the classical models

Ambiente computacional paradesenvolvimento de aplicações de controladores lógicos programáveis baseado em linguagens SFC e ST

This work proposes an environment for programming programmable logic controllers applied to oil wells with BCP type method of artificially lifting. The environment will have an editor based in the diagram of sequential functions for programming of PLCs. This language was chosen due to the fact of being high-level and accepted by the international standard IEC 61131-3. The use of these control programs in real PLC will be possible with the use of an intermediate level of language based on XML specification PLCopen T6 XML. For the testing and validation of the control programs, an area should be available for viewing variables obtained through communication with a real PLC. Thus, the main contribution of this work is to develop a computational environment that allows: modeling, testing and validating the controls represented in SFC and applied in oil wells with BCP type method of artificially lifting

Correlações nos dfa de diversos perfis geológicos. estudo de caso: Bacia de Campos - RJ

This work aims to study the fluctuation structure of physical properties of oil well profiles. It was used as technique the analysis of fluctuations without trend (Detrended Fluctuation Analysis - DFA). It has been made part of the study 54 oil wells in the Campo de Namorado located in the Campos Basin in Rio de Janeiro. We studied five sections, namely: sonic, density, porosity, resistivity and gamma rays. For most of the profiles , DFA analysis was available in the literature, though the sonic perfile was estimated with the aid of a standard algorithm. The comparison between the exponents of DFA of the five profiles was performed using linear correlation of variables, so we had 10 comparisons of profiles. Our null hypothesis is that the values of DFA for the various physical properties are independent. The main result indicates that no refutation of the null hypothesis. That is, the fluctuations observed by DFA in the profiles do not have a universal character, that is, in general the quantities display a floating structure of their own. From the ten correlations studied only the profiles of density and sonic one showed a significant correlation (p> 0.05). Finally these results indicate that one should use the data from DFA with caution, because, in general, based on geological analysis DFA different profiles can lead to disparate conclusions

Estudo do acoplamento do poço injetor nas simulações de injeção cíclica de vapor

Steam injection is a method usually applied to very viscous oils and consists of injecting heat to reduce the viscosity and, therefore, increase the oil mobility, improving the oil production. For designing a steam injection project it is necessary to have a reservoir simulation in order to define the various parameters necessary for an efficient heat reservoir management, and with this, improve the recovery factor of the reservoir. The purpose of this work is to show the influence of the coupled wellbore/reservoir on the thermal simulation of reservoirs under cyclic steam stimulation. In this study, the methodology used in the solution of the problem involved the development of a wellbore model for the integration of steam flow model in injection wellbores, VapMec, and a blackoil reservoir model for the injection of cyclic steam in oil reservoirs. Thus, case studies were developed for shallow and deep reservoirs, whereas the usual configurations of injector well existing in the oil industry, i.e., conventional tubing without packer, conventional tubing with packer and insulated tubing with packer. A comparative study of the injection and production parameters was performed, always considering the same operational conditions, for the two simulation models, non-coupled and a coupled model. It was observed that the results are very similar for the specified well injection rate, whereas significant differences for the specified well pressure. Finally, on the basis of computational experiments, it was concluded that the influence of the coupled wellbore/reservoir in thermal simulations using cyclic steam injection as an enhanced oil recovery method is greater for the specified well pressure, while for the specified well injection rate, the steam flow model for the injector well and the reservoir may be simulated in a non- coupled way

Adsorção competitiva de inibidor de corrosão usado em poços de perfuração de petróleo sobre aço, esmectita e arenito

A commercial corrosion inhibitor used in petroleum production was characterized by means of infrared spectroscopy and energy dispersive spectroscopy (EDS). Predicting the adsorption behavior of corrosion inhibitor onto steel, sandstone and esmectite is the key to improve working conditions. In this study, the adsorption kinetics of inhibitor formulations in HCl 15% or in Mud Acid (HCl 13,5% and ammonium bifluoride) onto steel, sandstone and esmectite was determined by means of spectrophotometry. Kinetic parameters indicated that adsorption of inhibitor in the presence of bifluoride was favored. Moreover, the adsorption constant rate was the largest when the substrate was esmectite.

Adsorção competitiva de inibidor de corrosão usado em poços de perfuração de petróleo sobre aço, esmectita e arenito

A commercial corrosion inhibitor used in petroleum production was characterized by means of infrared spectroscopy and energy dispersive spectroscopy (EDS). Predicting the adsorption behavior of corrosion inhibitor onto steel, sandstone and esmectite is the key to improve working conditions. In this study, the adsorption kinetics of inhibitor formulations in HCl 15% or in Mud Acid (HCl 13,5% and ammonium bifluoride) onto steel, sandstone and esmectite was determined by means of spectrophotometry. Kinetic parameters indicated that adsorption of inhibitor in the presence of bifluoride was favored. Moreover, the adsorption constant rate was the largest when the substrate was esmectite.

Um sistema para estimação da vazão de gás de poços produzindo por Plunger Lift para vaso separador de teste em plataformas de petróleo

This work intends to analyze the behavior of the gas flow of plunger lift wells producing to well testing separators in offshore production platforms to aim a technical procedure to estimate the gas flow during the slug production period. The motivation for this work appeared from the expectation of some wells equipped with plunger lift method by PETROBRAS in Ubarana sea field located at Rio Grande do Norte State coast where the produced fluids measurement is made in well testing separators at the platform. The oil artificial lift method called plunger lift is used when the available energy of the reservoir is not high enough to overcome all the necessary load losses to lift the oil from the bottom of the well to the surface continuously. This method consists, basically, in one free piston acting as a mechanical interface between the formation gas and the produced liquids, greatly increasing the well s lifting efficiency. A pneumatic control valve is mounted at the flow line to control the cycles. When this valve opens, the plunger starts to move from the bottom to the surface of the well lifting all the oil and gas that are above it until to reach the well test separator where the fluids are measured. The well test separator is used to measure all the volumes produced by the well during a certain period of time called production test. In most cases, the separators are designed to measure stabilized flow, in other words, reasonably constant flow by the use of level and pressure electronic controllers (PLC) and by assumption of a steady pressure inside the separator. With plunger lift wells the liquid and gas flow at the surface are cyclical and unstable what causes the appearance of slugs inside the separator, mainly in the gas phase, because introduce significant errors in the measurement system (e.g.: overrange error). The flow gas analysis proposed in this work is based on two mathematical models used together: i) a plunger lift well model proposed by Baruzzi [1] with later modifications made by Bolonhini [2] to built a plunger lift simulator; ii) a two-phase separator model (gas + liquid) based from a three-phase separator model (gas + oil + water) proposed by Nunes [3]. Based on the models above and with field data collected from the well test separator of PUB-02 platform (Ubarana sea field) it was possible to demonstrate that the output gas flow of the separator can be estimate, with a reasonable precision, from the control signal of the Pressure Control Valve (PCV). Several models of the System Identification Toolbox from MATLAB® were analyzed to evaluate which one better fit to the data collected from the field. For validation of the models, it was used the AIC criterion, as well as a variant of the cross validation criterion. The ARX model performance was the best one to fit to the data and, this way, we decided to evaluate a recursive algorithm (RARX) also with real time data. The results were quite promising that indicating the viability to estimate the output gas flow rate from a plunger lift well producing to a well test separator, with the built-in information of the control signal to the PCV

Comportamento dos contaminantes nos solos e águas subterrâneas em depósito de resíduos do refino de petróleo - Borreiro - Na Refinaria Alberto Pasqualini, RS

Resíduos do refino de petróleo dispostos no meio ambiente representam fontes de contaminação por metais pesados e hidrocarbonetos para solos, subsolos, águas superficiais e subterrâneas. O presente estudo foi realizado na área designada Borreiro da Refinaria Alberto Pasqualini, RS – REFAP, onde nas décadas de ‘70 e ‘80 foram depositados resíduos do refino de petróleo (borra) intercalados com camadas de aterros em volume total da ordem de 100.500 m3. O uso da área cessou há cerca de 20 anos, estando os materiais, desde então sujeitos aos mecanismos de atenuação natural. É objetivo do trabalho avaliar a situação da área, relacionando e descrevendo as interações dos sedimentos e das águas subterrâneas com os contaminantes. Para caracterização geológica e hidrogeológica da área foram realizadas 35 sondagens e construídos 6 poços de monitoramento com profundidades de 5 a 7 metros. Visando avaliar a contaminação do meio ambiente pela disposição de borra, foram amostrados os materiais do depósito, bem como os sedimentos cenozóicos que constituem a base do depósito, formada dominantemente por areia fina siltico-argilosa. Também foram coletadas, amostras de águas subterrâneas do aqüífero freático que juntamente com os sedimentos foram analisadas por Espectrofotometria de Absorção Atômica e por Cromatografia Gasosa. Para caracterização da distribuição espacial e análise da mobilidade dos componentes da borra, foram construídos mapas de isoteores e perfis verticais das sondagens, comparando textura dominante e profundidade de cada amostra com seu conteúdo de contaminante. Foram realizados testes de lixiviação e de solubilização para avaliar a relação dos contaminantes com os materiais, permitindo classificar as amostras de acordo com a NBR-10.004, determinando, assim as zonas mais impactadas da área. A caracterização geológica e hidrogeológica serviu de base de dados para a apresentação da dispersão dos contaminantes no depósito, nos sedimentos cenozóicos e no aqüífero freático. Foi definida a dispersão dos contaminantes orgânicos nas fases, livre, adsorvida, residual, gasosa e dissolvida bem como a distribuição dos metais na superfície, no subsolo e nas águas subterrâneas.

Determinantes da exploração de petróleo na indústria brasileira

Este estudo analisa os fatores que influenciaram a escolha de empresas de petróleo no Brasil a explorar os blocos licitados pela Agencia Nacional de Petróleo (ANP). Os acordos de Exploração & Produção da ANP definem um Programa Exploratório Mínimo a ser feito no bloco licitado, mas os resultados mostram que em muitos casos esse programa exploratório não foi cumprido. Os resultados empíricos mostram que vários fatores afetam a decisão de perfurar poços, entre elas o bonus final oferecido pelo bloco, a participação da Petrobras e a localização geográfica do bloco. A regulação também teve uma influência importante na exploração de blocos, pela indicação da intensidade de poços a ser perfurados e pela flexibilidade de cessão no controle dos blocos. Os resultados também mostram que novas informações têm um papel importante na decisão de perfuração, especialmente informações sobre o preço do petróleo, o prêmio pago pelo lance vencedor e as atividades prévias de perfurações em blocos vizinhos após a licitação. O estudo utiliza uma amostra de 88 blocos licitados durante as quatro primeiras rodadas de licitações da ANP e a incidência de perfurações de poços nesses blocos entre o período de 1999 a 2009.

Proposta de metodologia de avaliação de portfólio por opções reais, considerando o valor da informação: um estudo de caso em exploração de petróleo

A pesquisa será realizada comparando-se as metodologias de avaliação de oportunidades exploratórias. Para tanto, será feito um estudo de caso, tomando como base uma carteira de oportunidades formada para avaliar os blocos do 2° leilão da ANP, em que se obtêm o VME de cada oportunidade com a característica geológica (litologia) definida previamente pelo leilão. Posteriormente, com base em informações dos poços perfurados desde o leilão até os dias atuais, far-se-á a valoração das oportunidades com plays correlacionados aos poços já perfurados. Entende-se que a correlação ocorre quando a oportunidade exploratória possuir a mesma formação geológica dos poços perfurados. Para regiões onde não houve perfurações será utilizada a opção de se investir em sísmica em busca de informações sobre a oportunidade. Com o resultado ex-post dos poços, calcula-se os valores monetários da árvore de decisão, evidenciando a opção de espera do resultado dos poços e quantificando o valor da informação adquirido com as informações dos poços e/ou sísmicas. A pesquisa utilizou dados fornecidos pela ANP, por meio do Banco de Dados de Exploração e Produção (BDEP) e também dados do 2° leilão realizado pela ANP em novembro de 2000.

Determinantes do lance vencedor em leilões de petróleo e gás: avaliando o caso brasileiro

A descoberta de novas reservas de petróleo na camada Pré-Sal, no Brasil, tem suscitado o interesse de diversas empresas petrolíferas do mundo todo, com o intuito de participar dos leilões para adquirir o direito de explorar tais reservas. Diversos determinantes podem afetar o comportamento estratégico dos jogadores na de nição dos lances em um leilão. Assim, ao contrário da maioria dos estudos empíricos de leilões, consideramos assimetria informacional, segundo Rezende (2008), para obter estimativas estruturais e mais precisas do impacto de diferentes fatores no lance vencedor dos blocos de petróleo no Brasil. Encontramos que diversas variáveis como área e localização do bloco, número de poços perfurados por km² e tipos de parcerias entre empresas afetam o lance vencedor. Por fi m, veri fiamos que o problema da "maldição do vencedor"ocasionado pela presença de agentes informados (por ex., Petrobras) acaba elevando o valor do lance vencedor.

Docagem ou afretamento de UMS: a escolha ótima para a extensão da vida útil das plataformas de petróleo de campos marítimos maduros sob o enfoque das opções reais

O objetivo deste trabalho é propor a utilização do arcabouço teórico das opções reais e a posterior aplicação do modelo binomial na avaliação de projetos relacionados à exploração e produção de petróleo, tendo em vista a flexibilidade gerencial, os riscos e as incertezas técnicas e de mercado que norteiam o setor petrolífero upstream. Ademais, a aplicação do modelo proposto capta o papel crucial da volatilidade do preço do petróleo na avaliação da decisão de investimento e revela a existência dos custos irrecuperáveis extremos decorrentes do ativo real, neste caso, a unidade marítima de petróleo. Assim, com o intuito de prolongar o ciclo de produção de unidade marítima de petróleo com características preestabelecidas, propõe-se a avaliação econômica de duas alternativas tecnológicas para a extensão de vida útil da plataforma marítima objeto de estudo, sendo estas alternativas tratadas como opções de expansão. As alternativas propostas são duas: o afretamento da UMS (Unidade de Manutenção e Segurança) acoplada à plataforma e a docagem da plataforma a partir da desmobilização, isto é, o descomissionamento, e envio da plataforma ao estaleiro. Na aplicação da primeira opção, a UMS se configura em uma embarcação equipada com toda a estrutura necessária para a realização de serviço de manutenção e revitalização, sem que ocorra interrupção da produção de petróleo. Por outro lado, a opção de descomissionamento é desprovida de receita até o retorno da plataforma do estaleiro. No que tange à metodologia do presente trabalho, o modelo binomial com probabilidades de risco neutro é aplicado considerando a receita proveniente da produção de petróleo de uma plataforma marítima com sistema de produção flutuante com 14 poços, sendo 10 produtores e 4 injetores e sustentada por 8 linhas de ancoragem. Também é definida a volatilidade do projeto como sendo a volatilidade do preço do petróleo. Por fim, as opções de expansão podem ser exercidas a qualquer momento antes da data de expiração das opções, data esta coincidente para ambas as opções e referente ao término de contrato de afretamento da UMS, que corresponde ao período de cinco anos. Neste período de cinco anos, as duas alternativas são exercidas a partir do primeiro ano, com receitas e custos distintos em virtude das especificidades decorrentes das alternativas tecnológicas propostas. A partir da aplicação do modelo binomial com probabilidades de risco neutro sob o enfoque das opções reais, as duas alternativas tecnológicas são tratadas como opções americanas na avaliação econômica da revitalização e manutenção da plataforma marítima. Também realiza-se a análise tradicional do VPL para as duas alternativas. As duas análises apontam para a escolha da UMS como alternativa ótima de expansão da vida útil da plataforma. Ademais, a análise sob o enfoque das opções reais capta um valor adicional em ambas as alternativas tecnológicas, fruto das características inerentes à indústria petrolífera. Quanto à estrutura do trabalho em questão se divide em cinco capítulos: introdução, referencial teórico, metodologia, apresentação dos resultados e as considerações finais.