Nanoscale imaging of chemical interactions: Fluorine on graphite

Using C60-functionalized scanning tunneling microscope tips, we have investigated the adsorption of fluorine on graphite. Based on characteristics of the accompanying electron standing waves, we are able to distinguish the fluorine adatoms that have bonded ionically to the graphite surface from those that have formed covalent bonds with the surface. This result permits determination of the ratio of ionic to covalent C–F bonds on graphite obtained by gas phase fluorination, which seems to be temperatureindependent between 200 and 300°C under the reaction conditions used.

Antigenicity of fullerenes: Antibodies specific for fullerenes and their characteristics

The recent interest in using Buckminsterfullerene (fullerene) derivatives in biological systems raises the possibility of their assay by immunological procedures. This, in turn, leads to the question of the ability of these unprecedented polygonal structures, made up solely of carbon atoms, to induce the production of specific antibodies. Immunization of mice with a C60 fullerene derivative conjugated to bovine thyroglobulin yielded a population of fullerene-specific antibodies of the IgG isotype, showing that the immune repertoire was diverse enough to recognize and process fullerenes as protein conjugates. The population of antibodies included a subpopulation that crossreacted with a C70 fullerene as determined by immune precipitation and ELISA procedures. These assays were made possible by the synthesis of water-soluble fullerene derivatives, including bovine and rabbit serum albumin conjugates and derivatives of trilysine and pentalysine, all of which were characterized as to the extent of substitution and their UV-Vis spectra. Possible interactions of fullerenes with the combining sites of IgG are discussed based on the physical chemistry of fullerenes and previously described protein-fullerene interactions. They remain to be confirmed by the isolation of mAbs for x-ray crystallographic studies.

Villa of Mysteries, interior, Room of Mysteries, west wall, Domina

Pompeii (deserted settlement), Italy

Mechanical properties and the evolution of matrix molecules in PTFE upon irradiation with MeV alpha particles

The morphology, chemical composition, and mechanical properties in the surface region of α-irradiated polytetrafluoroethylene (PTFE) have been examined and compared to unirradiated specimens. Samples were irradiated with 5.5 MeV 4He2+ ions from a tandem accelerator to doses between 1 × 106 and 5 × 1010 Rad. Static time-of-flight secondary ion mass spectrometry (ToF-SIMS), using a 20 keV C60+ source, was employed to probe chemical changes as a function of a dose. Chemical images and high resolution spectra were collected and analyzed to reveal the effects of a particle radiation on the chemical structure. Residual gas analysis (RGA) was utilized to monitor the evolution of volatile species during vacuum irradiation of the samples. Scanning electron microscopy (SEM) was used to observe the morphological variation of samples with increasing a particle dose, and nanoindentation was engaged to determine the hardness and elastic modulus as a function of a dose. The data show that PTFE nominally retains its innate chemical structure and morphology at a doses <109 Rad. At α doses ≥109 Rad the polymer matrix experiences increased chemical degradation and morphological roughening which are accompanied by increased hardness and declining elasticity. At  α doses >1010 Rad the polymer matrix suffers severe chemical degradation and material loss. Chemical degradation is observed in ToF-SIMS by detection of ions that are indicative of fragmentation, unsaturation, and functionalization of molecules in the PTFE matrix. The mass spectra also expose the subtle trends of crosslinking within the α-irradiated polymer matrix. ToF-SIMS images support the assertion that chemical degradation is the result of a particle irradiation and show morphological roughening of the sample with increased a dose. High resolution SEM images more clearly illustrate the morphological roughening and the mass loss that accompanies high doses of a particles. RGA confirms the supposition that the outcome of chemical degradation in the PTFE matrix with continuing irradiation is evolution of volatile species resulting in morphological roughening and mass loss. Finally, we reveal and discuss relationships between chemical structure and mechanical properties such as hardness and elastic modulus.

Fullerene-capped copolymers for bulk heterojunctions: device stability and efficiency improvements

A fullerene end-capped polymer-compatibilizer based on poly(3-hexylthiophene) (P3HT) was synthesized and demonstrated to have a remarkable effect on both the stability and efficiency of devices made from exemplar P3HT and [6,6]-phenyl C61-butyric acid methyl ester (PCBM). P3HT with ethynyl chain-ends and α-azido-ω-bromo-PS were prepared via Grignard metathesis (GRIM) and atom transfer radical polymerisation, respectively. “Click” chemistry resulted in the preparation of poly(3-hexylthiophene)-block-ω-bromo-polystyrene (P3HT-b-PS-Br), and subsequent atom transfer radical addition chemistry with fullerene (C60) yielded the donor–acceptor block copolymer P3HT-b-PS-C60. Both P3HT-b-PS-Br and P3HT-b-PS-C60 were considered as compatibilizers with P3HT/PCBM blends, with the study detailing effects on active-layer morphology, device efficiency and stability. When used at low concentrations, both P3HT-b-PS-Br (1%) and P3HT-b-PS-C60 (0.5%) resulted in considerable 28% and 35% increases in efficiencies with respect to devices made from P3HT/PCBM alone. Furthermore, P3HT-b-PS-C60 (0.5%) resulted in an important improvement in device stability.

Efeito do ácido ascórbico sobre a espermatogênese de camundongos com distrofia muscular de Duchenne

The objective was to evaluate spermatogenesis alterations caused by DMD and the effect of the treatment using ascorbic acid in preventing those injuries. Twenty four mice were used, 12 from the C57BL/10 lineage (non-dystrophic) and 12 from the C57BL/10Mdx (dystrophic). The sample was divided in six groups containing 4 animals each, as: C30 = 30 days control; D30 = Dystrophic with 30 days; C60 = 60 days control; D60 = Distrophic with 60 days; CS60 = 60 days control supplemented with ascorbic acid and DS60 = Dystrophic with 60 days supplemented with ascorbic acid. The ascorbic acid supplementation was given in the water, 0,005 mg/day. After euthanasia, the testicles (right and left) were collected, weighted and cross sectioned. The material was fixed in the Karnovsky solution for 24 hours, included in resin for histological studies (morphological and morphometric analyzes) submitted to ultrastructural analysis and immunohistochemistry for caspase-3. There was a significant increase in the tunica propria percentage in D30 compared to C30 and D60. The ultrastructural analysis showed mitochondrial apoptosis evidence of Sertoli cells that can reduce sperm efficiency in CS60 and DS60. A higher volume density of apoptotic cells postivas to Caspase-3 in C30 and D30 versus DS60 compared to CS60. There was severe hypertrophy of the Leydig cells between D30 and D60. However, with supplementation was observed reversal of this change in DS60. The ultrastructure of Leydig cells to early presence of lipid vesicles was observed in the group pre-pubertal dystrophic (D30). Thus, the DMD affect the organization of the seminiferous tubules and intertubule, however, the ascorbic acid supplementation used for the treatment of DMD has been just enough to reduce the hypertrophy of the Leydig cells.

Establishment of a preconditioning regime for air permeability and sorptivity of alkali-activated slag concrete

This study reports an experimental investigation designed to assess the influence of near-surface moisture contents on permeation properties of alkali-activated slag concrete (AASC). Five different drying periods (5, 10, 15, 20 and 25 days) and three AASC and normal concretes with compressive strength grades ranging from C30 to C60 were considered. Assessment of moisture distribution was
achieved using 100 mm diameter cores with drilled cavities. Results indicate that air permeability of AASC is very sensitive to the moisture content and its spatial distribution, especially at relative humidity above 65%. To control the influence of moisture on permeation testing, the recommendation of this paper is that AASC specimens should be dried in controlled conditions at 40 C for 10 days prior to testing. It was also concluded from this study that AASC tends to perform less well, in terms of air permeability and sorptivity, than normal concrete for a given strength grade. This conclusion reinforces the need to further examine AASC properties prior to its widespread practical use.

Ultrafast charge-transfer in organic photovoltaic interfaces: geometrical and functionalization effects

Understanding the microscopic mechanisms of electronic excitation in organic photovoltaic cells is a challenging problem in the design of efficient devices capable of performing sunlight harvesting. Here we develop and apply an ab initio approach based on time-dependent density functional theory and Ehrenfest dynamics to investigate photoinduced charge transfer in small organic molecules. Our calculations include mixed quantum–classical dynamics with ions moving classically and electrons quantum mechanically, where no experimental external parameter other than the material geometry is required. We show that the behavior of photocarriers in zinc phthalocyanine (ZnPc) and C60 systems, an effective prototype system for organic solar cells, is sensitive to the atomic orientation of the donor and the acceptor units as well as the functionalization of covalent molecules at the interface. In particular, configurations with the ZnPc molecules facing on C60 facilitate charge transfer between substrate and molecules that occurs within 200 fs. In contrast, configurations where ZnPc is tilted above C60 present extremely low carrier injection efficiency even at longer times as an effect of the larger interfacial potential level offset and higher energetic barrier between the donor and acceptor molecules. An enhancement of charge injection into C60 at shorter times is observed as binding groups connect ZnPc and C60 in a dyad system. Our results demonstrate a promising way of designing and controlling photoinduced charge transfer on the atomic level in organic devices that would lead to efficient carrier separation and maximize device performance.

Structural and Electrical Investigation of C 60 –Graphene Vertical Heterostructures

Graphene, with its unique electronic and structural qualities, has become an important playground for studying adsorption and assembly of various materials including organic molecules. Moreover, organic/graphene vertical structures assembled by van der Waals interaction have potential for multifunctional device applications. Here, we investigate structural and electrical properties of vertical heterostructures composed of C60 thin film on graphene. The assembled film structure of C60 on graphene is investigated using transmission electron microscopy, which reveals a uniform morphology of C60 film on graphene with a grain size as large as 500 nm. The strong epitaxial relations between C60 crystal and graphene lattice directions are found, and van der Waals ab initio calculations support the observed phenomena. Moreover, using C60-graphene heterostructures, we fabricate vertical graphene transistors incorporating n-type organic semiconducting materials with an on/off ratio above 3 × 10(3). Our work demonstrates that graphene can serve as an excellent substrate for assembly of molecules, and attained organic/graphene heterostructures have great potential for electronics applications.

Flexible Sensor for Wearable Vital Sign Monitoring System

In modern society, the body health is a very important issue to everyone. With the development of the science and technology, the new and developed body health monitoring device and technology will play the key role in the daily medical activities. This paper focus on making progress in the design of the wearable vital sign system. A vital sign monitoring system has been proposed and designed. The whole detection system is composed of signal collecting subsystem, signal processing subsystem, short-range wireless communication subsystem and user interface subsystem. The signal collecting subsystem is composed of light source and photo diode, after emiting light of two different wavelength, the photo diode collects the light signal reflected by human body tissue. The signal processing subsystem is based on the analog front end AFE4490 and peripheral circuits, the collected analog signal would be filtered and converted into digital signal in this stage. After a series of processing, the signal would be transmitted to the short-range wireless communication subsystem through SPI, this subsystem is mainly based on Bluetooth 4.0 protocol and ultra-low power System on Chip(SoC) nRF51822. Finally, the signal would be transmitted to the user end. After proposing and building the system, this paper focus on the research of the key component in the system, that is, the photo detector. Based on the study of the perovskite materials, a low temperature processed photo detector has been proposed, designed and researched. The device is made up of light absorbing layer, electron transporting and hole blocking layer, hole transporting and electron blocking layer, conductive substrate layer and metal electrode layer. The light absorbing layer is the important part of whole device, and it is fabricated by perovskite materials. After accepting the light, the electron-hole pair would be produced in this layer, and due to the energy level difference, the electron and hole produced would be transmitted to metal electrode and conductive substrate electrode through electron transporting layer and hole transporting layer respectively. In this way the response current would be produced. Based on this structure, the specific fabrication procedure including substrate cleaning; PEDOT:PSS layer preparation; pervoskite layer preparation; PCBM layer preparation; C60, BCP, and Ag electrode layer preparation. After the device fabrication, a series of morphological characterization and performance testing has been done. The testing procedure including film-forming quality inspection, response current and light wavelength analysis, linearity and response time and other optical and electrical properties testing. The testing result shows that the membrane has been fabricated uniformly; the device can produce obvious response current to the incident light with the wavelength from 350nm to 800nm, and the response current could be changed along with the light wavelength. When the light wavelength keeps constant, there exists a good linear relationship between the intensity of the response current and the power of the incident light, based on which the device could be used as the photo detector to collect the light information. During the changing period of the light signal, the response time of the device is several microseconds, which is acceptable working as a photo detector in our system. The testing results show that the device has good electronic and optical properties, and the fabrication procedure is also repeatable, the properties of the devices has good uniformity, which illustrates the fabrication method and procedure could be used to build the photo detector in our wearable system. Based on a series of testing results, the paper has drawn the conclusion that the photo detector fabricated could be integrated on the flexible substrate and is also suitable for the monitoring system proposed, thus made some progress on the research of the wearable monitoring system and device. Finally, some future prospect in system design aspect and device design and fabrication aspect are proposed.

Síntese de sensores, funcionalização de nanopartículas e fibras óticas para reconhecimento de aniões

O trabalho descrito nesta dissertação envolve a síntese e caracterização de novos macrociclos tetrapirrólicos e afins com potencial aplicação como quimiossensores de aniões, tanto em solução como quando suportados em diferentes materiais. As porfirinas e ftalocianinas ocupam um lugar de destaque nesta dissertação, pelo que no primeiro capítulo, é feita uma revisão bibliográfica acerca das suas metodologias de síntese bem como das suas principais características e aplicações, nomeadamente como quimiossensores de aniões. No segundo capítulo é discutida a síntese e caracterização dos compostos porfirínicos e ftalocianinicos com grupos amina ou poliamina, posteriormente utilizados como hospedeiros de aniões. Descrevem-se, pormenorizadamente, os métodos de síntese, purificação e caracterização estrutural dos diversos compostos sintetizados. No terceiro capítulo realizaram-se os estudos de complexação com aniões em solução e determinaram-se as respetivas constantes de afinidade. Os compostos sintetizados apresentam capacidade de interagir com diferentes aniões. As porfirinas testadas apresentam elevadas constantes de afinidade para o anião di-hidrogenofosfato, mesmo em soluções aquosas quando testadas com cristais piezoelétricos. No caso das ftalocianinas verificou-se que estas interagem com vários aniões e apresentam propriedades cromogénicas, podendo mesmo distinguir aniões cianeto em soluções contendo água. No quarto capítulo estudou-se a imobilização dos quimiossensores, que demonstraram maior eficácia nos estudos de reconhecimento em solução, em diferentes materiais. Primeiro foi estudada a imobilização dos quimiossensores em nanopartículas de sílica (com e sem núcleo magnético) e testada a sua capacidade como sensor de aniões em solução. Numa segunda parte foi estudada a imobilização em fibras óticas. Estas, além das suas excecionais propriedades físico-químicas, têm a vantagem de poderem ser integradas em diferentes estruturas e/ou equipamentos de análise. Na ultima parte desta dissertação encontra-se a descrição da síntese e caracterização de novos conjugados porfirina-C60-OligoDNA com potencial aplicação em transferência eletrónica. Foram sintetizados e caracterizados novos compostos porfirina-OligoDNA e C60-OligoDNA. Esta parte do trabalho foi realizada no “Institute of Advanced Energy” na Universidade de Quioto, Japão.

Síntese de compostos multiporfirínicos covalentes

Nesta tese descreve-se a síntese de compostos multiporfirínicos covalentes bem como a avaliação da potencial utilização destes compostos como quimiossensores de iões metálicos e para a construção de estruturas supramoleculares com fulerenos. No capítulo 1 desta tese é feita uma introdução à química, propriedades e aplicações das porfirinas e sistemas multiporfirínicos. Relativamente aos sistemas multiporfirínicos é feita uma revisão bibliográfica acerca das estratégias de síntese e abordagem geral à química supramolecular de sistemas porfirina-fulereno. No capítulo 2 são apresentados os resultados referentes à síntese e caracterização dos vários sistemas multiporfirínicos desenvolvidos neste trabalho. De um modo geral, a síntese desses compostos envolveu reações de substituição aromática nucleofílica. Para esse efeito foi necessário preparar porfirinas de partida contendo grupos nucleofílicos nas posições meso (-C6H4OH e -C6H4NH2). Os sistemas multiporfirínicos foram obtidos por reações entre as porfirinas de partida e hexafluorobenzeno ou 5,10,15,20tetraquis(pentafluorofenil)porfirina. Descreve-se também a síntese de uma díade porfirina-C60 e de uma pentíade contendo quatro unidades de porfirina e uma de C60, envolvendo reações de cicloadição 1,3-dipolar e de substituição aromática nucleofílica. Os estudos efetuados ao nível da aplicação de alguns dos novos sistemas multiporfirínicos sintetizados e de um dos seus precursores, a 5-[4(pentafluorofeniloxi)fenil]-10,15,20-trifenilporfirina, como sensores de iões metálicos encontram-se descritos no capítulo 3. Neste capítulo, a título introdutório, é feita uma breve abordagem aos quimiossensores colorimétricos e de fluorescência, apresentando também alguns exemplos de porfirinas como quimiossensores de iões metálicos já descritos na literatura científica. A caracterização fotofísica dos compostos em estudo também é descrita neste capítulo. Os compostos estudados mostraram capacidade de interagir com vários iões metálicos, verificando-se um aumento da seletividade para o ião Hg2+ com o aumento do número de unidades porfirínicas constituintes dos sistemas multiporfirínicos. Os resultados referentes aos estudos de complexação de alguns dos sistemas multiporfirínicos sintetizados com fulerenos encontram-se descritos no capítulo 4. Neste capítulo descreve-se também a caracterização fotofísica dos compostos em estudo. Os estudos realizados com os sistemas multiporfirínicos mostraram uma fraca interação com os fulerenos C60 e C70. No entanto, os valores das constantes de afinidade obtidos com 1-metil-2-(4piridil)[60]fulero[c]pirrolidina mostraram que os sistemas multiporfirínicos apresentam capacidade para formar complexos com este derivado de C60 por coordenação axial e por interações π-π. No capítulo 5 é discutido o trabalho que envolveu o desenvolvimento de novos métodos na síntese de derivados tetrapirrólicos do tipo pirrolo[3,4-b]porfirinas contendo um grupo NH livre no anel exocíclico. A estratégia de síntese requereu a preparação de uma clorina fundida com um anel pirrolina seguida da redução do anel pirrolina. Deste modo obteve-se uma nova clorina fundida com um anel pirrolidina contendo um grupo NH livre. Esta nova clorina foi usada na preparação de uma díade clorina-porfirina por reação de N-arilação com 5,10,15,20-tetraquis(pentafluorofenil)porfirina. A estrutura cristalina da nova díade foi resolvida por difração de raios-X de cristal único. A estrutura dos compostos sintetizados foi estabelecida recorrendo a diversas técnicas espectroscópicas nomeadamente ressonância magnética nuclear (RMN de 1H, 13C e 19F), espectrometria de massa e espectrofotometria de UVvis. No último capítulo desta tese descrevem-se, pormenorizadamente, todas as experiências efetuadas, incluindo os métodos de síntese, purificação e caracterização estrutural dos diversos compostos sintetizados bem como as medições espectrofotométricas e espectrofluorimétricas.

In Situ Characterization of Optical Absorption by Carbonaceous Aerosols: Calibration and Measurement

Light absorption by aerosols has a great impact on climate change. A Photoacoustic spectrometer (PA) coupled with aerosol-based classification techniques represents an in situ method that can quantify the light absorption by aerosols in a real time, yet significant differences have been reported using this method versus filter based methods or the so-called difference method based upon light extinction and light scattering measurements. This dissertation focuses on developing calibration techniques for instruments used in measuring the light absorption cross section, including both particle diameter measurements by the differential mobility analyzer (DMA) and light absorption measurements by PA. Appropriate reference materials were explored for the calibration/validation of both measurements. The light absorption of carbonaceous aerosols was also investigated to provide fundamental understanding to the absorption mechanism. The first topic of interest in this dissertation is the development of calibration nanoparticles. In this study, bionanoparticles were confirmed to be a promising reference material for particle diameter as well as ion-mobility. Experimentally, bionanoparticles demonstrated outstanding homogeneity in mobility compared to currently used calibration particles. A numerical method was developed to calculate the true distribution and to explain the broadening of measured distribution. The high stability of bionanoparticles was also confirmed. For PA measurement, three aerosol with spherical or near spherical shapes were investigated as possible candidates for a reference standard: C60, copper and silver. Comparisons were made between experimental photoacoustic absorption data with Mie theory calculations. This resulted in the identification of C60 particles with a mobility diameter of 150 nm to 400 nm as an absorbing standard at wavelengths of 405 nm and 660 nm. Copper particles with a mobility diameter of 80 nm to 300 nm are also shown to be a promising reference candidate at wavelength of 405 nm. The second topic of this dissertation focuses on the investigation of light absorption by carbonaceous particles using PA. Optical absorption spectra of size and mass selected laboratory generated aerosols consisting of black carbon (BC), BC with non-absorbing coating (ammonium sulfate and sodium chloride) and BC with a weakly absorbing coating (brown carbon derived from humic acid) were measured across the visible to near-IR (500 nm to 840 nm). The manner in which BC mixed with each coating material was investigated. The absorption enhancement of BC was determined to be wavelength dependent. Optical absorption spectra were also taken for size and mass selected smoldering smoke produced from six types of commonly seen wood in a laboratory scale apparatus.

ELECTRON TRANSPORT IN LOW-DIMENSIONAL NANOSTRUCTURES - THEORETICAL STUDY WITH APPLICATION

Graphene as a carbon monolayer has attracted extensive research interest in recent years. My research work within the frame of density functional theory has suggested that positioning graphene in proximity to h-BN may induce a finite energy gap in graphene, which is important for device applications. For an AB-stacked graphene/BN bilayer, a finite gap is induced at the equilibrium configuration. This induced gap shows a linear relationship with the applied strain. For a graphene/BN/graphene trilayer, a negligible gap is predicted in the ground state due to the overall symmetry of the system. When an electric field is applied, a tunable gap can be obtained for both AAA and ABA stackings. Enhanced tunneling current in the AA-stacked bilayer nanoribbons is predicted compared to either single-layer or AB-stacked bilayer nanoribbons. Interlayer separation between the nanoribbons is shown to have a profound impact on the conducting features. The effect of boron or nitrogen doping on the electronic transport properties of C60 fullerene is studied. The BC59 fullerene exhibits a considerably higher current than the pristine or nitrogen doped fullerenes beyond the applied bias of 1 V, suggesting it can be an effective semiconductor in p-type devices. The interaction between nucleic acid bases - adenine (A), guanine (G), cytosine (C), thymine (T) and uracil (U) - and a hydrogen-passivated silicon nanowire (SiNW) is investigated. The binding energy of the bases with the SiNW shows the order: G > A~C~T~U. This suggests that the interaction strength of a hydrogen passivated SiNW with the nucleic acid bases is nearly the same-G being an exception. The nature of the interaction is suggested to be electrostatic.