An experimental and numerical study of ductile failure under quasi-static and impact loadings of Inconel 718 nickel-base superalloy

A numerical and experimental study of ballistic impacts at various temperatures on precipitation hardened Inconel 718 nickel-base superalloy plates has been performed. A coupled elastoplastic-damage constitutive model with Lode angle dependent failure criterion has been implemented in LS-DYNA non-linear finite element code to model the mechanical behaviour of such an alloy. The ballistic impact tests have been carried out at three temperatures: room temperature (25 °C), 400 °C and 700 °C. The numerical study showed that the mesh size is crucial to predict correctly the shear bands detected in the tested plates. Moreover, the mesh size convergence has been achieved for element sizes on the same order that the shear bands. The residual velocity as well as the ballistic limit prediction has been considered excellent for high temperature ballistic tests. Nevertheless, the model has been less accurate for the numerical simulations performed at room temperature, being though in reasonable agreement with the experimental data. Additionally, the influence that the Lode angle had on quasi-static failure patterns such as cup-cone and slanted failure has been studied numerically. The study has revealed that the combined action of weakened constitutive equations and Lode angle dependent failure criterion has been necessary to predict the previously-mentioned failure patterns

A coupled elastoplastic-damage constitutive model with Lode angle dependent failure criterion

A coupled elastoplastic-damage constitutive model with Lode angle dependent failure criterion for high strain and ballistic applications is presented. A Lode angle dependent function is added to the equivalent plastic strain to failure definition of the Johnson–Cook failure criterion. The weakening in the elastic law and in the Johnson–Cook-like constitutive relation implicitly introduces the Lode angle dependency in the elastoplastic behaviour. The material model is calibrated for precipitation hardened Inconel 718 nickel-base superalloy. The combination of a Lode angle dependent failure criterion with weakened constitutive equations is proven to predict fracture patterns of the mechanical tests performed and provide reliable results. Additionally, the mesh size dependency on the prediction of the fracture patterns was studied, showing that was crucial to predict such patterns

Patrones y procesos espaciales en poblaciones y comunidades vegetales: nuevas herramientas e hipótesis

Generalmente los patrones espaciales de puntos en ecología, se definen en el espacio bi-dimensional, donde cada punto representado por el par ordenado (x,y), resume la ubicación espacial de una planta. La importancia de los patrones espaciales de plantas radica en que proceden como respuesta ante importantes procesos ecológicos asociados a la estructura de una población o comunidad. Tales procesos incluyen fenómenos como la dispersión de semillas, la competencia por recursos, la facilitación, respuesta de las plantas ante algún tipo de estrés, entre otros. En esta tesis se evalúan los factores y potenciales procesos subyacentes, que explican los patrones de distribución espacial de la biodiversidad vegetal en diferentes ecosistemas como bosque mediterráneo, bosque tropical y matorral seco tropical; haciendo uso de nuevas metodologías para comprobar hipótesis relacionadas a los procesos espaciales. En este trabajo se utilizaron dos niveles ecológicos para analizar los procesos espaciales, el nivel de población y el nivel de comunidad, con el fin de evaluar la importancia relativa de las interacciones intraespecíficas e interespecíficas. Me centré en el uso de funciones estadísticas que resumen los patrones de puntos para explorar y hacer inferencias a partir de datos espaciales, empezando con la construcción de un nuevo modelo nulo para inferir variantes del síndrome de dispersión de una planta parásita en España central. Se analizó la dependencia de los patrones espaciales tanto de los hospedantes afectados como de los no-afectados y se observó fuerte dependencia a pequeña y mediana distancia. Se utilizaron dos funciones (kernel) para simular la dispersión de la especie parásita y se identificó consistencia de estos modelos con otros síndromes de dispersión adicionalmente a la autodispersión. Un segundo tema consistió en desarrollar un método ANOVA de dos vías? para patrones de puntos replicados donde el interés se concentró en evaluar la interacción de dos factores. Este método se aplicó a un caso de estudio que consitió en analizar la influencia de la topografía y la altitud sobre el patrón espacial de un arbusto dominante en matorral seco al sur del Ecuador, cuyos datos provienen de patrones de puntos replicados basados en diseño. Partiendo de una metodología desarrollada para procesos uni-factoriales, se construyó el método para procesos bi-factoriales y así poder evaluar el efecto de interacción. Se observó que la topografía por sí sola así como la interacción con la altitud presentaron efecto significativo sobre la formación del patrón espacial. Un tercer tema fue identificar la relación entre el patrón espacial y el síndrome de dispersión de la comunidad vegetal en el bosque tropical de la Isla de Barro Colorado (BCI), Panamá. Muchos estudios se han desarrollado en este bosque tropical y algunos han analizado la relación síndrome-patrón espacial, sin embargo lo novedoso de nuestro estudio es que se evaluaron un conjunto amplio de modelos (114 modelos) basados en procesos que incorporan la limitación de la dispersión y la heterogeneidad ambiental, y evalúan el efecto único y el efecto conjunto, para posteriormente seleccionar el modelo de mejor ajuste para cada especie. Más de la mitad de las especies presentaron patrón espacial consistente con el efecto conjutno de la limitación de la dispersión y heterogeneidad ambiental y el porcentaje restante de especies reveló en forma equitativa el efecto único de la heterogeneidad ambiental y efecto único de limitación de la dispersión. Finalmente, con la misma información del bosque tropical de BCI, y para entender las relaciones que subyacen para mantener el equilibrio de la biodiversidad, se desarrolló un índice de dispersión funcional local a nivel de individuo, que permita relacionar el patrón espacial con cuatro rasgos funcionales clave de las especies. Pese a que muchos estudios realizados involucran esta comunidad con la teoría neutral, se encontró que el ensamble de la comunidad de BCI está afectado por limitaciones de similaridad y de hábitat a diferentes escalas. ABSTRACT Overall the spatial point patterns in ecology are defined in two-dimensional space, where each point denoted by the (x,y) ordered pair, summarizes the spatial location of a plant. The spatial point patterns are essential because they arise in response to important ecological processes, associated with the structure of a population or community. Such processes include phenomena as seed dispersal, competition for resources, facilitation, and plant response to some type of stress, among others. In this thesis, some factors and potential underlying processes were evaluated in order to explain the spatial distribution patterns of plant biodiversity. It was done in different ecosystems such as Mediterranean forest, tropical forest and dry scrubland. For this purpose new methodologies were used to test hypothesis related to spatial processes. Two ecological levels were used to analyze the spatial processes, at population and community levels, in order to assess the relative importance of intraspecific and interspecific interactions. I focused on the use of spatial statistical functions to summarize point patterns to explore and make inferences from spatial data, starting with the construction of a new null model to infer variations about the dispersal syndrome of a parasitic plant in central Spain. Spatial dependence between point patterns in a multivariate point process of affected and unaffected hosts were analyzed and strong dependence was observed at small and medium distance. Two kernel functions were used to simulate the dispersion of parasitic plant and consistency of these models with other syndromes was identified, in addition to ballistic dispersion. A second issue was to analyze altitude and topography effects on the spatial population structure of a dominant shrub in the dry ecosystem in southern Ecuador, whose data come from replicated point patterns design-based. Based on a methodology developed for uni-factorial process, a method for bi-factorial processes was built to assess the interaction effect. The topography alone and interacting with altitude showed significant effect on the spatial pattern of shrub. A third issue was to identify the relationship between the spatial pattern and dispersal syndromes of plant community in the tropical forest of Barro Colorado Island (BCI), Panamá. Several studies have been developed in this tropical forest and some focused on the spatial pattern-syndrome relationship; however the novelty of our study is that a large set of models (114 models) including dispersal limitation and environmental heterogeneity were evaluated, used to identify the only and joint effect to subsequently select the best fit model for each species. Slightly more than fifty percent of the species showed spatial pattern consistent with only the dispersal limitation, and the remaining percentage of species revealed the only effect of environmental heterogeneity and habitat-dispersal limitation joined effect, equitably. Finally, with the same information from the tropical forest of BCI, and to understand the relationships underlying for balance of biodiversity, an index of the local functional dispersion was developed at the individual level, to relate the spatial pattern with four key functional traits of species. Although many studies involve this community with neutral theory, the assembly of the community is affected by similarity and habitat limitations at different scales.

Multiscale analysis of the mechanical behavior of needle-punched nonwoven fabrics

Los fieltros son una familia de materiales textiles constituidos por una red desordenada de fibras conectadas por medio de enlaces térmicos, químicos o mecánicos. Presentan menor rigidez y resistencia (al igual que un menor coste de procesado) que sus homólogos tejidos, pero mayor deformabilidad y capacidad de absorción de energía. Los fieltros se emplean en diversas aplicaciones en ingeniería tales como aislamiento térmico, geotextiles, láminas ignífugas, filtración y absorción de agua, impacto balístico, etc. En particular, los fieltros punzonados fabricados con fibras de alta resistencia presentan una excelente resistencia frente a impacto balístico, ofreciendo las mismas prestaciones que los materiales tejidos con un tercio de la densidad areal. Sin embargo, se sabe muy poco acerca de los mecanismos de deformación y fallo a nivel microscópico, ni sobre como influyen en las propiedades mecánicas del material. Esta carencia de conocimiento dificulta la optimización del comportamiento mecánico de estos materiales y también limita el desarrollo de modelos constitutivos basados en mecanismos físicos, que puedan ser útiles en el diseño de componentes estructurales. En esta tesis doctoral se ha llevado a cabo un estudio minucioso con el fin de determinar los mecanismos de deformación y las propiedades mecánicas de fieltros punzonados fabricados con fibras de polietileno de ultra alto peso molecular. Los procesos de deformación y disipación de energía se han caracterizado en detalle por medio de una combinación de técnicas experimentales (ensayos mecánicos macroscópicos a velocidades de deformación cuasi-estáticas y dinámicas, impacto balístico, ensayos de extracción de una o múltiples fibras, microscopía óptica, tomografía computarizada de rayos X y difracción de rayos X de gran ángulo) que proporcionan información de los mecanismos dominantes a distintas escalas. Los ensayos mecánicos macroscópicos muestran que el fieltro presenta una resistencia y ductilidad excepcionales. El estado inicial de las fibras es curvado, y la carga se transmite por el fieltro a través de una red aleatoria e isótropa de nudos creada por el proceso de punzonamiento, resultando en la formación de una red activa de fibra. La rotación y el estirado de las fibras activas es seguido por el deslizamiento y extracción de la fibra de los puntos de anclaje mecánico. La mayor parte de la resistencia y la energía disipada es proporcionada por la extracción de las fibras activas de los nudos, y la fractura final tiene lugar como consecuencia del desenredo total de la red en una sección dada donde la deformación macroscópica se localiza. No obstante, aunque la distribución inicial de la orientación de las fibras es isótropa, las propiedades mecánicas resultantes (en términos de rigidez, resistencia y energía absorbida) son muy anisótropas. Los ensayos de extracción de múltiples fibras en diferentes orientaciones muestran que la estructura de los nudos conecta más fibras en la dirección transversal en comparación con la dirección de la máquina. La mejor interconectividad de las fibras a lo largo de la dirección transversal da lugar a una esqueleto activo de fibras más denso, mejorando las propiedades mecánicas. En términos de afinidad, los fieltros deformados a lo largo de la dirección transversal exhiben deformación afín (la deformación macroscópica transfiere directamente a las fibras por el material circundante), mientras que el fieltro deformado a lo largo de la dirección de la máquina presenta deformación no afín, y la mayor parte de la deformación macroscópica no es transmitida a las fibras. A partir de estas observaciones experimentales, se ha desarrollado un modelo constitutivo para fieltros punzonados confinados por enlaces mecánicos. El modelo considera los efectos de la deformación no afín, la conectividad anisótropa inducida durante el punzonamiento, la curvatura y re-orientación de la fibra, así como el desenredo y extracción de la fibra de los nudos. El modelo proporciona la respuesta de un mesodominio del material correspondiente al volumen asociado a un elemento finito, y se divide en dos bloques. El primer bloque representa el comportamiento de la red y establece la relación entre el gradiente de deformación macroscópico y la respuesta microscópica, obtenido a partir de la integración de la respuesta de las fibras en el mesodominio. El segundo bloque describe el comportamiento de la fibra, teniendo en cuenta las características de la deformación de cada familia de fibras en el mesodominio, incluyendo deformación no afín, estiramiento, deslizamiento y extracción. En la medida de lo posible, se ha asignado un significado físico claro a los parámetros del modelo, por lo que se pueden identificar por medio de ensayos independientes. Las simulaciones numéricas basadas en el modelo se adecúan a los resultados experimentales de ensayos cuasi-estáticos y balísticos desde el punto de vista de la respuesta mecánica macroscópica y de los micromecanismos de deformación. Además, suministran información adicional sobre la influencia de las características microstructurales (orientación de la fibra, conectividad de la fibra anisótropa, afinidad, etc) en el comportamiento mecánico de los fieltros punzonados. Nonwoven fabrics are a class of textile material made up of a disordered fiber network linked by either thermal, chemical or mechanical bonds. They present lower stiffness and strength (as well as processing cost) than the woven counterparts but much higher deformability and energy absorption capability and are used in many different engineering applications (including thermal insulation, geotextiles, fireproof layers, filtration and water absorption, ballistic impact, etc). In particular, needle-punched nonwoven fabrics manufactured with high strength fibers present an excellent performance for ballistic protection, providing the same ballistic protection with one third of the areal weight as compared to dry woven fabrics. Nevertheless, very little is known about their deformation and fracture micromechanisms at the microscopic level and how they contribute to the macroscopic mechanical properties. This lack of knowledge hinders the optimization of their mechanical performance and also limits the development of physically-based models of the mechanical behavior that can be used in the design of structural components with these materials. In this thesis, a thorough study was carried out to ascertain the micromechanisms of deformation and the mechanical properties of a needle-punched nonwoven fabric made up by ultra high molecular weight polyethylene fibers. The deformation and energy dissipation processes were characterized in detail by a combination of experimental techniques (macroscopic mechanical tests at quasi-static and high strain rates, ballistic impact, single fiber and multi fiber pull-out tests, optical microscopy, X-ray computed tomography and wide angle X-ray diffraction) that provided information of the dominant mechanisms at different length scales. The macroscopic mechanical tests showed that the nonwoven fabric presented an outstanding strength and energy absorption capacity. It was found that fibers were initially curved and the load was transferred within the fabric through the random and isotropic network of knots created by needlepunching, leading to the formation of an active fiber network. Uncurling and stretching of the active fibers was followed by fiber sliding and pull-out from the entanglement points. Most of the strength and energy dissipation was provided by the extraction of the active fibers from the knots and final fracture occurred by the total disentanglement of the fiber network in a given section at which the macroscopic deformation was localized. However, although the initial fiber orientation distribution was isotropic, the mechanical properties (in terms of stiffness, strength and energy absorption) were highly anisotropic. Pull-out tests of multiple fibers at different orientations showed that structure of the knots connected more fibers in the transverse direction as compared with the machine direction. The better fiber interconnection along the transverse direction led to a denser active fiber skeleton, enhancing the mechanical response. In terms of affinity, fabrics deformed along the transverse direction essentially displayed affine deformation {i.e. the macroscopic strain was directly transferred to the fibers by the surrounding fabric, while fabrics deformed along the machine direction underwent non-affine deformation, and most of the macroscopic strain was not transferred to the fibers. Based on these experimental observations, a constitutive model for the mechanical behavior of the mechanically-entangled nonwoven fiber network was developed. The model accounted for the effects of non-affine deformation, anisotropic connectivity induced by the entanglement points, fiber uncurling and re-orientation as well as fiber disentanglement and pull-out from the knots. The model provided the constitutive response for a mesodomain of the fabric corresponding to the volume associated to a finite element and is divided in two blocks. The first one was the network model which established the relationship between the macroscopic deformation gradient and the microscopic response obtained by integrating the response of the fibers in the mesodomain. The second one was the fiber model, which took into account the deformation features of each set of fibers in the mesodomain, including non-affinity, uncurling, pull-out and disentanglement. As far as possible, a clear physical meaning is given to the model parameters, so they can be identified by means of independent tests. The numerical simulations based on the model were in very good agreement with the experimental results of in-plane and ballistic mechanical response of the fabrics in terms of the macroscopic mechanical response and of the micromechanisms of deformation. In addition, it provided additional information about the influence of the microstructural features (fiber orientation, anisotropic fiber connectivity, affinity) on the mechanical performance of mechanically-entangled nonwoven fabrics.

Observations of Comet 9P/Tempel 1 around the Deep Impact event by the OSIRIS cameras onboard Rosetta

The OSIRIS cameras on the Rosetta spacecraft observed Comet 9P/Tempel 1 from 5 days before to 10 days after it was hit by the Deep Impact projectile. The Narrow Angle Camera (NAC) monitored the cometary dust in 5 different filters. The Wide Angle Camera (WAC) observed through filters sensitive to emissions from OH, CN, Na, and OI together with the associated continuum. Before and after the impact the comet showed regular variations in intensity. The period of the brightness changes is consistent with the rotation period of Tempel 1. The overall brightness of Tempel 1 decreased by about 10% during the OSIRIS observations. The analysis of the impact ejecta shows that no new permanent coma structures were created by the impact. Most of the material moved with View the MathML source∼200ms−1. Much of it left the comet in the form of icy grains which sublimated and fragmented within the first hour after the impact. The light curve of the comet after the impact and the amount of material leaving the comet (View the MathML source4.5–9×106kg of water ice and a presumably larger amount of dust) suggest that the impact ejecta were quickly accelerated by collisions with gas molecules. Therefore, the motion of the bulk of the ejecta cannot be described by ballistic trajectories, and the validity of determinations of the density and tensile strength of the nucleus of Tempel 1 with models using ballistic ejection of particles is uncertain.

Grs 1915+105: a superluminal source in the Galaxy.

We present the results of additional observations of the high energy source GRS 1915+105, which produces ejecta with apparent superluminal motions. The observations reported here were carried out with the Very Large Array at 3.5 cm and 20 cm. The 3.5-cm observations made during 1994 May allowed us to continue following the proper motions of the bright 1994 March 19 ejecta, as well as those of a subsequent, fainter ejection. The proper motions of the 1994 March 19 ejecta continued to be ballistic (i.e., constant) over the period of about 75 days where they remained detectable. From the observations in 1994 March-May we have identified three ejections of pairs of plasma clouds moving ballistically in approximately the same direction on the sky with similar proper motions. The 20-cm observations made during 1994 November and December were used to search, yet unsuccessfully, for extended jets or lobes associated with GRS 1915+105.

Anisotropic magnetoresistance in nanocontacts

We present ab initio calculations of the evolution of anisotropic magnetoresistance (AMR) in Ni nanocontacts from the ballistic to the tunnel regime. We find an extraordinary enhancement of AMR, compared to bulk, in two scenarios. In systems without localized states, such as chemically pure break junctions, large AMR only occurs if the orbital polarization of the current is large, regardless of the anisotropy of the density of states. In systems that display localized states close to the Fermi energy, such as a single electron transistor with ferromagnetic electrodes, large AMR is related to the variation of the Fermi energy as a function of the magnetization direction.

Electronic structure and transport properties of atomic NiO spinvalves

Ab initio quantum transport calculations show that short NiO chains suspended in Ni nanocontacts present a very strong spin-polarization of the conductance.The generalized gradient approximation we use here predicts a similar polarization of the conductance as the one previously computed with non-local exchange, confirming the robustness of the result. Their use as nanoscopic spinvalves is proposed.

Considerations on the electromagnetic flow in Airy beams based on the Gouy phase

We reexamine the Gouy phase in ballistic Airy beams (AiBs). A physical interpretation of our analysis is derived in terms of the local phase velocity and the Poynting vector streamlines. Recent experiments employing AiBs are consistent with our results. We provide an approach which potentially applies to any finite-energy paraxial wave field that lacks a beam axis.

The current state, problems and future of Germany's air and missile defence. OSW Commentary No. 105, 2013-04-10

From German point of view, air and missile defence systems are of little relevance for the protection of Germany’s territory. However, they are seen as important for conducting ‘out of area’ operations, providing military assistance to allies, and for Germany’s political and military- technical position within NATO. The Bundeswehr has been modernising its air and missile defence systems for several years. The modernisation of very short-range and short-range systems is slightly behind schedule. Plans to modernise the medium-range air and missile defence have been encountering problems since the United States decided to refrain from buying the jointly developed MEADS system. Therefore Germany is currently considering using the results of the MEADS program in the development of its own medium-range air and missile defence system, possibly in co-operation with France and Italy. Such a system would ensure protection against short-range ballistic missiles (up to 1000 km) and might become part of NATO’s ballistic missile defence, replacing the Patriot batteries which Germany is currently operating. Furthermore, Germany could expand its involvement in NATO’s ballistic missile defence in the future by buying or developing system to intercept medium- and intermediate- range ballistic missiles (up to 3000 km and 5500 km). The final decision on this matter has not yet been taken, and will be left for the successive governments of Germany to resolve. It will depend on a number of political, military and financial factors.

Análise numérico-experimental de blindagens balísticas

O desenvolvimento técnico e científico em torno das blindagens tem procurado contrariar o constante aperfeiçoamento dos projéteis e do seu poder de penetração. Para cumprir este objetivo, é necessário recorrer a soluções inovadoras tanto em termos dos materiais utilizados no fabrico, como ao nível do formato da própria blindagem. Com este trabalho pretende-se dar os primeiros passos na produção e teste de materiais em situação de tiro real, bem como na modelação e simulação dos mesmos com o objetivo de adquirir capacidades, técnicas e procedimentos para trabalhos futuros. O trabalho teve início com a realização da pesquisa bibliográfica sobre vários aspetos desde o fabrico até à avaliação do desempenho de blindagens balísticas. O trabalho teórico desta tese incidiu na modelação por elementos finitos dos elementos balísticos (proteções e projétil) tendo como objetivo a simulação numérica da sua interação em condições de impacto. O trabalho experimental foi realizado no campo de tiro da Escola das Armas onde foram testados os alvos com os materiais compósitos produzidos e com placas de alumínio, com diferentes combinações. A análise de resultados permitiu comparar e avaliar as diferenças entre as estimativas teóricas e as suas limitações com as observações experimentais do tiro real.

Avaliação do comportamento mecânico de blindagens balísticas

Desde os primórdios da história, o ser humano tem procurado criar e aperfeiçoar mecanismos que o protejam das agressões do inimigo. Neste sentido, o desenvolvimento técnico e científico em torno das blindagens tem procurado contrariar o constante aperfeiçoamento dos projécteis e do seu poder de penetração. De facto, as blindagens são muitas vezes desenvolvidas para fins específicos de forma a aumentar o seu desempenho na protecção de pessoas e equipamentos. Para cumprir este objectivo, é muitas vezes necessário recorrer a soluções inovadoras, tanto em termos dos materiais e da respectiva qualidade/quantidade utilizada no fabrico, como ao nível do formato da própria blindagem. A avaliação do desempenho das blindagens é extremamente importante para garantir a segurança do utilizador nas mais diversas actividades, tanto militares, como civis. No entanto, esta informação é considerada muitas vezes sigilosa pelo risco que representa para a sociedade militar e civil, e/ou por fortes interesses económicos por parte das empresas que comercializam estes equipamentos de protecção. Quando realizada, esta avaliação restringe-se geralmente a aspectos meramente qualitativos, tais como a verificação do dano produzido pelo projéctil. No entanto, não é usual avaliar o valor da energia remanescente de impacto que, não sendo absorvida pela blindagem, é transmitida ao utilizador ou equipamento. Por outras palavras, será a não penetrabilidade da blindagem uma condição suficiente para garantir a segurança? A presente investigação incidiu no desenvolvimento de uma metodologia experimental inovadora que permita quantificar a energia remanescente de impacto, transmitida através da blindagem ao utilizador, a quando da interacção com o projéctil. Para permitir realizar os ensaios balísticos em condições laboratoriais controladas foi desenvolvido um sistema de impulsão electromagnética que possibilita a ausência de ruído, de fumos ou clarões, consentindo o disparo de diferentes tipos de projécteis com ajuste contínuo da energia de impacto. Para testar a metodologia desenvolvida foram utilizadas blindagens representativas das actividades do Exército Português. De facto, o contributo do presente trabalho permite preencher uma lacuna na avaliação de blindagens, apresentando-se como uma mais-valia, na medida que poderá ser utilizado futuramente pelo Exército Português para uma avaliação independente de blindagens.

A Wormian Bone, Mimicking an Entry Gunshot Wound of the Skull, in an Anthropological Specimen

Wormian bones (WB) are irregular small cranial ossicles found along suture lines and fontanels. In Brazil, gunshot wounds to the skull are quite common in young individuals. Nevertheless, as far as we know, this is the first report of a WB giving an erroneous aspect of gunshot entrance due to its displacement position. The present manuscript describes the case of a Brazilian young man who died due to ballistic trauma, where a gaping bony defect on the right side of the skull was thought to be the exit wound of an injury related to the destruction found on the left side, highly suggestive of firearm injury. Thus, this case study has brought to light similarities between a traumatic lesion and an orifice of a WB, with emphasis on differential diagnosis during routine anthropological examinations.

Estudo de balística interna

O conhecimento e a compreensão dos processos que ocorrem no interior do tubo de uma arma de fogo, desde a ignição da carga propulsora, até à saída do projétil, é importante no desenvolvimento do armamento, de uma forma económica e segura. Com a modelação matemática destes processos, que é uma abordagem muito utilizada atualmente, é possível otimizar a carga explosiva e os materiais utilizados. Este estudo foi realizado no âmbito do projeto FIREND, resultante da colaboração entre a Academia Militar e o Instituto Superior Técnico O modelo desenvolvido foi aplicado a um sistema, arma, carga propulsora e projétil, já existente, tendo os resultados obtidos sido validados com o software PRODAS e tabelas referentes ao presente sistema. Para melhor compreender a importância das variáveis envolvidas, é feita uma análise de sensibilidade a diversos parâmetros balísticos, mantendo constante as dimensões da arma em estudo. Na análise dos resultados verifica-se que a cinta de travamento é um elemento muito importante, alterando significativamente os valores da pressão e da velocidade. Verificou-se também que com cargas propulsoras de maior taxa de queima é possível obter valores mais elevados de pressão máxima e velocidade à saída. Palavras chave: Balística interna; Projétil de Artilharia; Pressão; Velocidade; Modelação matemática; Análise de sensibilidade.

ICBM modernization : availability problems and flight test delays in Peacekeeper Program : report to the Chairman, Committee on Armed Services, House of Representatives /

"March 1989."