Introducing numerical analysis tools in engineering: a Scilab user case in electronics course

Software tools in education became popular since the widespread of personal computers. Engineering courses lead the way in this development and these tools became almost a standard. Engineering graduates are familiar with numerical analysis tools but also with simulators (e.g. electronic circuits), computer assisted design tools and others, depending on the degree. One of the main problems with these tools is when and how to start use them so that they can be beneficial to students and not mere substitutes for potentially difficult calculations or design. In this paper a software tool to be used by first year students in electronics/electricity courses is presented. The growing acknowledgement and acceptance of open source software lead to the choice of an open source software tool – Scilab, which is a numerical analysis tool – to develop a toolbox. The toolbox was developed to be used as standalone or integrated in an e-learning platform. The e-learning platform used was Moodle. The first approach was to assess the mathematical skills necessary to solve all the problems related to electronics and electricity courses. Analysing the existing circuit simulators software tools, it is clear that even though they are very helpful by showing the end result they are not so effective in the process of the students studying and self learning since they show results but not intermediate steps which are crucial in problems that involve derivatives or integrals. Also, they are not very effective in obtaining graphical results that could be used to elaborate reports and for an overall better comprehension of the results. The developed tool was based on the numerical analysis software Scilab and is a toolbox that gives their users the opportunity to obtain the end results of a circuit analysis but also the expressions obtained when derivative and integrals calculations, plot signals, obtain vector diagrams, etc. The toolbox runs entirely in the Moodle web platform and provides the same results as the standalone application. The students can use the toolbox through the web platform (in computers where they don't have installation privileges) or in their personal computers by installing both the Scilab software and the toolbox. This approach was designed for first year students from all engineering degrees that have electronics/electricity courses in their curricula.

Autonomous guided vehicles applied to industrial engineering and management studies

This article presents a framework to an Industrial Engineering and Management Science course from School of Management and Industrial Studies using Autonomous Ground Vehicles (AGV) to supply materials to a production line as an experimental setup for the students to acquire knowledge in the production robotics area. The students must be capable to understand and put into good use several concepts that will be of utmost importance in their professional life such as critical decisions regarding the study, development and implementation of a production line. The main focus is a production line using AGVs, where the students are required to address several topics such as: sensors actuators, controllers and an high level management and optimization software. The presented framework brings to the robotics teaching community methodologies that allow students from different backgrounds, that normally don’t experiment with the robotics concepts in practice due to the big gap between theory and practice, to go straight to ”making” robotics. Our aim was to suppress the minimum start point level thus allowing any student to fully experience robotics with little background knowledge.

Projeto de estruturas de um edifício

O trabalho a apresentar tem como objetivo a aplicação dos conceitos adquiridos academicamente ao longo de todo o curso em Engenharia Civil num projeto de estruturas de um edifício. Este estudo surge no decorrer de um estágio curricular desenvolvido na empresa Segropol – Sociedade de Engenharia, Projetos e Obras, Lda. A partir das plantas de arquitetura, o projeto foi desenvolvido essencialmente em 4 etapas: conceção estrutural, pré-dimensionamento, validação das soluções estruturais e elaboração de peças desenhadas e pormenores construtivos. Para a definição e obtenção das soluções estruturais de uma estrutura é essencial realizar um enquadramento de toda a regulamentação aplicável, de modo a que todas as disposições associadas à segurança e estabilidade de um edifício sejam cumpridas. A análise e dimensionamento dos elementos foi efetuada com recurso ao programa de cálculo automático CYPE. Apresentando esta empresa vários serviços na área da fiscalização, é abordado neste documento um levantamento de vistorias de um loteamento, agrupando as diferentes anomalias e irregularidades detetadas.

Sustainability Improvement of a composite materials’ industry through recycling and re-engineering process approaches

Recent Advances in Mechanics and Materials in Design

Process engineering of liver cells for drug testing applications

Dissertação para obtenção do Grau de Doutor em Bioengenharia

Massive Open Online Course management: learning science and engineering through peer-reviewed projects

Massive Open Online Courses (MOOC) are gaining prominence in transversal teaching-learning strategies. However, there are many issues still debated, namely assessment, recognized largely as a cornerstone in Education. The large number of students involved requires a redefinition of strategies that often use approaches based on tasks or challenging projects. In these conditions and due to this approach, assessment is made through peer-reviewed assignments and quizzes online. The peer-reviewed assignments are often based upon sample answers or topics, which guide the student in the task of evaluating peers. This chapter analyzes the grading and evaluation in MOOCs, especially in science and engineering courses, within the context of education and grading methodologies and discusses possible perspectives to pursue grading quality in massive e-learning courses.

Hydrogeomechanics for rock engineering: coupling subsurface hydrogeomechanical assessement and hydrogeotechnical mapping on fracturated rock masses

The present work aims to achieve and further develop a hydrogeomechanical approach in Caldas da Cavaca hydromineral system rock mass (Aguiar da Beira, NW Portugal), and contribute to a better understanding of the hydrogeological conceptual site model. A collection of several data, namely geology, hydrogeology, rock and soil geotechnics, borehole hydraulics and hydrogeomechanics, was retrieved from three rock slopes (Lagoa, Amores and Cancela). To accomplish a comprehensive analysis and rock engineering conceptualisation of the site, a multi‐technical approach were used, such as, field and laboratory techniques, hydrogeotechnical mapping, hydrogeomechanical zoning and hydrogeomechanical scheme classifications and indexes. In addition, a hydrogeomechanical data analysis and assessment, such as Hydro‐Potential (HP)‐Value technique, JW Joint Water Reduction index, Hydraulic Classification (HC) System were applied on rock slopes. The hydrogeomechanical zone HGMZ 1 of Lagoa slope achieved higher hydraulic conductivities with poorer rock mass quality results, followed by the hydrogeomechanical zone HGMZ 2 of Lagoa slope, with poor to fair rock mass quality and lower hydraulic parameters. In addition, Amores slope had a fair to good rock mass quality and the lowest hydraulic conductivity. The hydrogeomechanical zone HGMZ 3 of Lagoa slope, and the hydrogeomechanical zones HGMZ 1 and HGMZ 2 of Cancela slope had a fair to poor rock mass quality but were completely dry. Geographical Information Systems (GIS) mapping technologies was used in overall hydrogeological and hydrogeomechanical data integration in order to improve the hydrogeological conceptual site model.

Reabilitação da Envolvente e Estrutura do Edifício da Piscina de Vila Nova de Cerveira

O presente relatório de estágio foi elaborado no âmbito da unidade curricular de DIPRE (Dissertação/Projeto/Estágio), que se encontra no plano de estudos do 2º semestre do 2º ano do Mestrado em Engenharia Civil, no ramo de Construções do Instituto Superior de Engenharia do Porto. Este documento faz referência ao estágio que se desenvolveu em ambiente empresarial na Telhabel Construções S.A. durante um período de seis meses. Nesse período foi me dada a oportunidade de acompanhar a obra de Reabilitação e Beneficiação do Edifício das Piscinas Municipais de Vila Nova de Cerveira. Numa primeira fase, o estágio foi desenvolvido no departamento de Subempreitadas da empresa, onde foi possível obter um primeiro contacto com os projetos da obra. Este período teve uma duração de cerca de 1 mês. Na segunda fase do estágio foi-me confiada a função de Diretor de Obra Adjunto, o que permitiu um acompanhamento mais direto da obra e uma participação mais ativa em todos os componentes da obra. Neste relatório procurou-se descrever algumas técnicas e soluções construtivas utilizadas na intervenção realizada. O relatório inicia-se com a fundamentação teórica que pretende dar a conhecer alguns conceitos teóricos, de forma a proporcionar uma melhor compressão do caso de estudo. A segunda parte deste relatório faz referência à aplicação dessas técnicas e soluções. Como no desenvolvimento do estágio tive oportunidade de ter uma intervenção bastante direta e ativa, será feita também uma referência a algumas situações onde esta participação foi mais notada. Este edifício, cuja arquitetura data a década de 90 do século passado, é tido como uma referência em Vila Nova de Cerveira, uma vez que se trata de um edifício com grande presença e singularidade a nível arquitetónico. Na intervenção que se realizou foram poucas as especialidades e zonas do edifício que não sofreram qualquer tipo de intervenção. Contudo, este relatório teve como grande foco a intervenção e o tratamento a que a estrutura metálica foi alvo. Este enfoque justifica-se com base na complexidade e importância que esta intervenção teve na globalidade da obra.

Engineering of bacterial exopolysaccharides: from synthesis to properties

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

A systems biology framework for pathway level culture media engineering: pplication to Pichia pastoris cultures

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

An approach to teach Calculus/Mathematical Analysis (for engineering students) using computers and active learning – its conception, development of materials and evaluation

Dissertação para obtenção do Grau de Doutor em Ciências da Educação

Comparative evaluation of aerial lime mortars for architectural conservation

Journal of Cultural Heritage 9 (2008) 338-346

Bioprocess engineering of induced pluripotent stem cells for application in cell therapy and pre-clinical research

Dissertation to obtain Master Degree in Biotechnology

Making connections: engineering and language issues in teaching english for specific purposes

Tese apresentada para cumprimento dos requisitos necessários à obtenção do grau de Doutor em Línguas, Literaturas e Culturas

Process Engineering of Stem Cells for Clinical Application

Over the last decade, human embryonic stem cells (hESCs) have garnered a lot of attention owing to their inherent self-renewal ability and pluripotency. These characteristics have opened opportunities for potential stem cell-based regenerative medicines, for development of drug discovery platforms and as unique in vitro models for the study of early human development.(...)