Imaging of the spleen in malaria

Splenomegaly, albeit variably, is a hallmark of malaria; yet, the role of the spleen in Plasmodium infections remains vastly unknown. The implementation of imaging to study the spleen is rapidly advancing our knowledge of this so-called "blackbox" of the abdominal cavity. Not only has ex vivo imaging revealed the complex functional compartmentalization of the organ and immune effector cells, but it has also allowed the observation of major structural remodeling during infections. In vivo imaging, on the other hand, has allowed quantitative measurements of the dynamic passage of the parasite at spatial and temporal resolution. Here, we review imaging techniques used for studying the malarious spleen, from optical microscopy to in vivo imaging, and discuss the bright perspectives of evolving technologies in our present understanding of the role of this organ in infections caused by Plasmodium.

DEVELOPMENT OF NOVEL METHODS TO MINIMIZE THE IMPACT OF SEQUENCING ERRORS IN THE NEXT-GENERATION SEQUENCING DATA ANALYSIS

Next-generation sequencing (NGS) technology has become a prominent tool in biological and biomedical research. However, NGS data analysis, such as de novo assembly, mapping and variants detection is far from maturity, and the high sequencing error-rate is one of the major problems. . To minimize the impact of sequencing errors, we developed a highly robust and efficient method, MTM, to correct the errors in NGS reads. We demonstrated the effectiveness of MTM on both single-cell data with highly non-uniform coverage and normal data with uniformly high coverage, reflecting that MTM’s performance does not rely on the coverage of the sequencing reads. MTM was also compared with Hammer and Quake, the best methods for correcting non-uniform and uniform data respectively. For non-uniform data, MTM outperformed both Hammer and Quake. For uniform data, MTM showed better performance than Quake and comparable results to Hammer. By making better error correction with MTM, the quality of downstream analysis, such as mapping and SNP detection, was improved. SNP calling is a major application of NGS technologies. However, the existence of sequencing errors complicates this process, especially for the low coverage (

Efficient management of available technologies. Aplication to mining operations for industry supplies

Nowadays, processing Industry Sector is going through a series of changes, including right management and reduction of environmental affections. Any productive process which looks for sustainable management is incomplete if Cycle of Life of mineral resources sustainability is not taken into account. Raw materials for manufacturing are provided by mineral resources extraction processes, such as copper, aluminum, iron, gold, silver, silicon, titanium? Those elements are necessary for Mankind development and are obtained from the Earth through mineral extractive processes. Mineral extraction processes are operations which must take care about the environmental consequences. Extraction of huge volumes of rock for their transformation into raw materials for industry must be optimized to reduce ecological cost of the final product as l was possible. Reducing the ecological balance on a global scale has no sense to design an efficient manufacturing in secondary industry (transformation), if in first steps of the supply chain (extraction) impact exceeds the savings of resources in successive phases. Mining operations size suggests that it is an environmental aggressive activity, but precisely because of its great impact must be the first element to be considered. That idea implies that a new concept born: Reduce economical and environmental cost This work aims to make a reflection on the parameters that can be modified to reduce the energy cost of the process without an increasing in operational costs and always ensuring the same production capacity. That means minimize economic and environmental cost at same time. An efficient design of mining operation which has taken into account that idea does not implies an increasing of the operating cost. To get this objective is necessary to think in global operation view to make that all departments involved have common guidelines which make you think in the optimization of global energy costs. Sometimes a single operational cost must be increased to reduce global cost. This work makes a review through different design parameters of surface mining setting some key performance indicators (KPIs) which are estimated from an efficient point of view. Those KPIs can be included by HQE Policies as global indicators. The new concept developed is that a new criteria has to be applied in company policies: improve management, improving OPERATIONAL efficiency. That means, that is better to use current resources properly (machinery, equipment,?) than to replace them with new things but not used correctly. As a conclusion, through an efficient management of current technologies in each extractive operation an important reduction of the energy can be achieved looking at downstream in the process. That implies a lower energetic cost in the whole cycle of life in manufactured product.

Impact of new technologies and social networks on a secondary education theatre project

This paper describes the potential impact of social media and new technologies in secondary education. The case of study has been designed for the drama and theatre subject. A wide set of tools like social networks, blogs, internet, multimedia content, local press and other promotional tools are promoted to increase students’ motivation. The experiment was developed at the highschool IES Al-Satt located in Algete in the Comunidad de Madrid. The students included in the theatre group present a low academic level, 80% of them had previously repeated at least one grade, half of them come from programs for students with learning difficulties and were at risk of social exclusion. This action is supported by higher and secondary education professors and teachers who look forward to implanting networked media technologies as new tools to improve the academic results and the degree of involvement of students. The results of the experiment have been excellent, based on satisfactory opinions obtained from a survey answered by students at the end of the course, and also revealed by the analytics taken from different social networks. This project is a pioneer in the introduction and usage of new technologies in secondary high-schools in Spain.

Application of remote sensing and GIS in mineral resource mapping - An overview

Remote sensing, as a direct adjunct to field, lithologic and structural mapping, and more recently, GIS have played an important role in the study of mineralized areas. A review on the application of remote sensing in mineral resource mapping is attempted here. It involves understanding the application of remote sensing in lithologic, structural and alteration mapping. Remote sensing becomes an important tool for locating mineral deposits, in its own right, when the primary and secondary processes of mineralization result in the formation of spectral anomalies. Reconnaissance lithologic mapping is usually the first step of mineral resource mapping. This is complimented with structural mapping, as mineral deposits usually occur along or adjacent to geologic structures, and alteration mapping, as mineral deposits are commonly associated with hydrothermal alteration of the surrounding rocks. In addition to these, understanding the use of hyperspectral remote sensing is crucial as hyperspectral data can help identify and thematically map regions of exploration interest by using the distinct absorption features of most minerals. Finally coming to the exploration stage, GIS forms the perfect tool in integrating and analyzing various georeferenced geoscience data in selecting the best sites of mineral deposits or rather good candidates for further exploration.

The effectiveness of hylan G-F 20 in patients with knee osteoarthritis: an application of two sets of response criteria developed by the OARSI and one set developed by OMERACT-OARSI

Objective: Secondary analyses of a previously conducted 1-year randomized controlled trial were performed to assess the application of responder criteria in patients with knee osteoarthritis (OA) using different sets of responder criteria developed by the Osteoarthritis Research Society International (OARSI) (Propositions A and B) for intra-articular drugs and Outcome Measures in Arthritis Clinical Trials (OMERACT)-OARSI (Proposition D). Methods: Two hundred fifty-five patients with knee OA were randomized to appropriate care with hylan G-F 20 (AC + H) or appropriate care without hylan G-F 20 (AC). A patient was defined as a responder at month 12 based on change in Western Ontario and McMaster Universities Osteoarthritis Index pain and function (0-100 normalized scale) and patient global assessment of OA in the study knee (at least one-category improvement in very poor, poor, fair, good and very good). All propositions incorporate both minimum relative and absolute changes. Results: Results demonstrated that statistically significant differences in responders between treatment groups, in favor of hylan G-F 20, were detected for Proposition A (AC + H = 53.5%, AC = 25.2%), Proposition B (AC + H = 56.7%, AC = 32.3%) and Proposition D (AC + H = 66.9%, AC = 42.5%). The highest effectiveness in both treatment groups was observed with Proposition D, whereas Proposition A resulted in the lowest effectiveness in both treatment groups. The treatment group differences always exceeded the required 20% minimum clinically important difference between groups established a priori, and were 28.3%, 24.4% and 24.4% for Propositions A, B and D, respectively. Conclusion: This analysis provides evidence for the capacity of OARSI and OMERACT-OARSI responder criteria to detect clinically important statistically detectable differences between treatment groups. (C) 2004 OsteoArthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

National culture, infrastructure, and costs: Factors that lead to the use of wireless technologies

This research-in-progress paper utilizes the Technology Acceptance Model (TAM) to assess the effects of National Culture, Infrastructure, and Access Costs on the adoption of Wireless Technologies in Australia. The cultural dimensions emanating from the GLOBE project were chosen because of their broad coverage and contemporary nature. Australia is unique in that it has one of the lowest population densities in the world. The provision of wireless technologies is challenging in such an environment, and I believe the model developed in this research will have applicability in other similarly populated countries.

Application of ERS-1 and Topex/Poseidon altimetry using precise orbits

The work described in this thesis concerns the application of radar altimetry, collected from the ERS-1 and TOPEX/POSEIDON missions, to precise satellite orbits computed at Aston University. The data is analysed in a long arc fashion to determine range biases, time tag biases, sea surface topographies and to assess the radial accuracy of the generated orbits through crossover analysis. A sea surface variability study is carried out for the North Sea using repeat altimeter profiles from ERS-1 and TOPEX/POSEIDON in order to verify two local U.K. models for ocean tide and storm surge effects. An on-side technique over the English Channel is performed to compute the ERS-1, TOPEX and POSEIDON altimeter range biases by using a combination of altimetry, precise orbits determined by short arc methods, tide gauge data, GPS measurements, geoid, ocean tide and storm surge models. The remaining part of the thesis presents some techniques for the short arc correction of long arc orbits. Validation of this model is achieved by way of comparison with actual SEASAT short arcs. Simulations are performed for the ERS-1 microwave tracking system, PRARE, using the range data to determine time dependent orbit corrections. Finally, a brief chapter is devoted to the recovery of errors in station coordinates by the use of multiple short arcs.

The Involvement of Institute for Information Technologies in Text Processing

The activities of the Institute of Information Technologies in the area of automatic text processing are outlined. Major problems related to different steps of processing are pointed out together with the shortcomings of the existing solutions.

A bizonyosságfüggvények elméletének alkalmazása a pénzügyi kimutatások ellenőrzésében (The application of the theory of belief functions in the audit of financial statements)

A könyvvizsgálati kockázat a téves auditjelentés kiadásának kockázata olyan esetekben, amikor a beszámoló lényeges hibás állítást tartalmaz. Ez a kockázat indirekt módon a hitelintézetek és pénzügyi vállalkozások működésében is megjelenik azokban az esetekben, amikor a lényeges hibás állítást a finanszírozott vállalkozás auditált beszámolója tartalmazza, amelynek az alapján finanszírozási döntést hoznak, vagy a finanszírozás folytatásáról a beszámolóban szereplő, hibás információkból számított hitelkovenánsok alapján döntenek. A könyvvizsgálat kockázatában a vizsgált gazdálkodó üzleti kockázatai tükröződnek vissza, ezért a kockázat felmérése és az ellenőrzés ennek alapján való megtervezése, majd végrehajtása kulcsfontosságú. Jelen tanulmány – kapcsolódva a Hitelintézeti Szemle 2011. évi 4. számához – szintén a kockázat és bizonytalanság témakörét tárgyalja, pontosabban ennek egy gyakorlati vetületét: a bizonyosságfüggvények (belief functions) alkalmazását a könyvvizsgálatban; mindezt a teljesség és a tankönyvszerű rendszerfelépítés igénye nélkül. A módszer ugyanis hazánkban szinte ismeretlen, nemzetközi viszonylatban viszont empirikus kutatásban is rámutattak már az alkalmazás lehetséges előnyeire a hagyományos valószínűségelméleten alapuló számszerű kockázatbecslésekkel szemben. Eszerint a bizonyosságfüggvények jobban reprezentálják a könyvvizsgálóknak a kockázatról alkotott képét, mint a valószínűségek, mert – szemben a hagyományos modellel – nem két, hanem három állapotot kezelnek: a pozitív bizonyíték létezését, a negatív bizonyíték létezését és a bizonyíték hiányának esetét. _______ Audit risk is the risk that the auditor expresses an inappropriate audit opinion when the fi nancial statements are materially misstated. This kind of risk indirectly appears in the fi nancial statements of fi nancial institutions, when the material misstatement is in the fi nanced entity’s statements that serve as a basis for lending decisions or when the decision is made based upon credit covenants calculated from misstated information. The risks of the audit process refl ect the business risks of the auditee, so the assessment of risks, and further the planning and performance of the audit based on it is of key importance. The current study – connecting to No 4 2011 of Hitelintézeti Szemle – also discusses the topic of risk and uncertainty, or to be more precise a practical implementation of the aforementioned: the application of belief functions in the fi eld of external audit. All this without the aim of achieving completeness or textbook-like scrutiny in building up the theory. While the formalism is virtually unknown in Hungary, on the international scene empirical studies pointed out the possible advantages of the application of the method in contrast to risk assessments based on the traditional theory of probability. Accordingly, belief functions provide a better representation of auditors’ perception of risk, as in contrast to the traditional model, belief functions deal with three rather than two states: the existence of supportive evidence, that of negative evidence and the lack of evidence.

The application of symphytosociology in landscape architecture in the Western Mediterranean

This essay addresses the application of indigenous plants in Landscape Architecture projects, based on studies carried out in the field of phytosociology and sinphytosociology. Through this knowledge, it is possible to increase and improve the use of indigenous plants in Projects, aiming at the preservation of biodiversity. Thus, to better understand the western Mediterranean territory, we present a brief biophysical characterization, in which we point out the main factors which contribute to the ground coverage’s distribution in the landscape, namely, concerning climate (oceanity, ombroclimate and thermoclimate) and substrate (geology and lithology). In view of the high level of uniqueness of the identified conditions, a synthesis of the potential main existing climatophilous woods is carried out, regarding sinphytosocialogical class/order, furthermore, pointing out, the main serial stages, their vegetation bioindicators and the ecological peculiarities of each stage (regressive or progressive). Therefore, based on the study area, we point out the vegetation bioindicator’s value as a work tool during analysis, thus allowing us to understand the existing edaphoclimatic conditions, as well as to elaborate a quick diagnosis of each potential climatophilous vegetation series. Moreover, based on the main stages of substitution, it is also possible to identify the presence of endemic plants, or under protection status, and finally, the conservation state of the study area. Further ahead, in project proposal phase, based on information gathered previously, we point out the possibility of elaborating a list of plants correctly adapted to the existing mesologicall conditions. Thus, within each serial stage, the necessary ecological conditions for a correct adaption of the vegetation material are referred, therefore, avoiding possible limiting factors to their development, such as precipitation, soil erosion, light availability, salinity, among many others. Lastly, some considerations are made about the main ideas that should be remembered throughout this essay, namely, regarding the importance of the use of sinphytosociology’s knowledge as an analysis tool, as well as of high interest for the elaboration of proposals which aim at the floristic heritage’s conservation and the landscape’s scenic quality. Ce travail traite de l`application de plantes autochtones dans des projets d`Architecture Paysagiste ayant pour base des études réalisées dans le cadre de la phytosociologie et Symphytosociologie. À travers ces connaissances, il est possible d`incrémenter et améliorer l`utilisation de plantes autochtones dans les Projets basés sur la conservation de la biodiversité. Ainsi, afin de mieux comprendre le territorie de la méditérrannée occidentale, on présente une brève caractérisation biophysique, dans laquelle nous soulignons les principaux facteurs qui contribuent à la répartition de la végétation dans le paysage, notamment au niveau climatique (l`océanité, ombrothermique et thermoclimatique) et du substrat (géologie et lithologie). Face aux conditions, identifiées ci-dessus, élévées en originalité, il est utile d`élaborer une synthèse des principaux bois potentiels climatophiles existants au niveau de la classe/ordre symphitosociologique, en soulignant également les principales étapes de série, leurs bioindicateurs végétaux et aux particularités écologiques de chaque étape (régressive ou progressive). Ainsi, sur la base de l`interprétation de la zone d`étude, le bioindicateur végétal se distingue comme un outil de travail durant l`analyse, permettant de cette façon comprendre les conditions édapho-climatiques existantes, ainsi comme élaborer un rapide diagnostic de chaque série de végétation potentielle climatophile. En outre, sur la base des principales étapes de remplacement, il est également possible d`identifier la présence de plantes endémiques, ou avec un statut de protection et enfin l`état de conservation de la zone d`étude. Déjà au stade de proposition du projet, basée sur l`information recueillie précédemment, il y a la possibilité d`établir une liste de plantes bien adaptées aux conditions mésologiques. Ainsi, dans chaque étape de série, les conditions écologiques nécessaires à une bonne adaptation de la matière végétale sont référées, évitant ainsi des facteurs limitant à son développement, tels que les précipitations, l`érosion des soís, disponibilité de la lumière, de la salinité, parmi beaucoup d`autres. Et enfin, quelques considérations se tissent sur les principales idées à retenir tout au long du travail, notamment l`importance d`utiliser la connaissance de la symphytosociologie comme un outil d`analyse d`un grand intérêt pour la développement de propositions pour la conservation du patrimoine floristique et la qualité pittoresque du paysage.

Augmented Audiovisual Translation: the Perks and Perils of the Implementation of Artificial Intelligence in Subtitling and Dubbing

This thesis examines the state of audiovisual translation (AVT) in the aftermath of the COVID-19 emergency, highlighting new trends with regards to the implementation of AI technologies as well as their strengths, constraints, and ethical implications. It starts with an overview of the current AVT landscape, focusing on future projections about its evolution and its critical aspects such as the worsening working conditions lamented by AVT professionals – especially freelancers – in recent years and how they might be affected by the advent of AI technologies in the industry. The second chapter delves into the history and development of three AI technologies which are used in combination with neural machine translation in automatic AVT tools: automatic speech recognition, speech synthesis and deepfakes (voice cloning and visual deepfakes for lip syncing), including real examples of start-up companies that utilize them – or are planning to do so – to localize audiovisual content automatically or semi-automatically. The third chapter explores the many ethical concerns around these innovative technologies, which extend far beyond the field of translation; at the same time, it attempts to revindicate their potential to bring about immense progress in terms of accessibility and international cooperation, provided that their use is properly regulated. Lastly, the fourth chapter describes two experiments, testing the efficacy of the currently available tools for automatic subtitling and automatic dubbing respectively, in order to take a closer look at their perks and limitations compared to more traditional approaches. This analysis aims to help discerning legitimate concerns from unfounded speculations with regards to the AI technologies which are entering the field of AVT; the intention behind it is to humbly suggest a constructive and optimistic view of the technological transformations that appear to be underway, whilst also acknowledging their potential risks.

Application of GA3 and girdling of branches on the production of extemporaneous fruits of 'Tahiti' acid lime

The objective of this study was to evaluate the effect of girdling of branches and the application of GA3, still in the main crop flowering on the formation of reproductive structures, the fruit set of the following extemporaneous flowering of 'Tahiti' acid lime. This work used a randomized block design with five replications in a 4x3 factorial design. The first factor was the foliar application of GA3, 88 days before extemporaneous flowering at five concentrations (0, 7, 14 and 21 mg.L-1). The second factor was the girdling times, 108 days before flowering onset (A108AF), 78 days before flowering (A78AF) plus no-girdling control (NG). In extemporaneous flowering, the proportion of buds, flowers and fruits that abscised was 38.75, 31.25 and 18.64% respectively and 11.34% of all reproductive structures formed were collected. GA3 did not affect fruit set. Girdling increased fruit set by 229 and 256% at A108DAF and A78DAF respectively, in relation to NG plants. The GA3 reduced the formation of floral structures, which resulted in a quadratic increase in field production by reducing the competition for photoassimilates among fruits. The concentration of 21 mg.L-1 was the most productive, with 15.97 fruit.plant-1.

Postharvest biological control of brown rot in peaches after cold storage preceded by preharvest chemical control 1

ABSTRACT Pathogenic fungi cause skin darkening and peach quality depreciation in post harvest. Therefore, alternative techniques to chemical treatment are necessary in order to reduce risks to human health. The aim of this study was to evaluate the effect of the application of Trichoderma harzianum in association with different fungicides applied before harvest to 'Eldorado' peaches for brown rot control and other quality parameters during storage. The treatments consisted of five preharvest fungicide applications (control, captan, iprodione, iminoctadine and tebuconazole) associated with postharvest application of T. harzianum, after cold storage (with and without application), in three evaluation times (zero, two and four days at 20 °C), resulting in a 5x2x3 factorial design. The application of T. harzianum only brought benefits to the control of brown rot when combined with the fungicide captan, at zero day shelf life. After two days, there was a greater skin darkening in peaches treated with T. harzianum compared with peaches without the treatment, except for peaches treated with the fungicide iprodione and T. harzianum The application of T. harzianum during postharvest showed no benefits for the control of brown rot, however, the association with fungicides reduced the incidence of Rhizopus stolonifer during the shelf life.

Application of fractional controllers for quad rotor

This paper studies the application of fractional algorithms in the control of a quad-rotor rotorcraft. The development of a flight simulator provide the evaluation of the controller algorithm. Several basic maneuvers are investigated, namely the elevation and the position control.