Concepções cotidianas e científicas sobre competição na educação de jovens e adultos

Objetiva compreender o papel das interações em sala de aula para a construção do conceito de competição. Propõe caracterizar e comparar as concepções de competição, de cada aluno da turma, antes, durante e após as aulas sobre Interações Ecológicas. Analisar a construção desse conceito nas interações alunoaluno e professor-aluno, para alguns dos alunos. Comparar as concepções dos alunos em diferentes momentos e avaliar as contribuições das interações para a elaboração conceitual de quatro alunos, que participaram de um dos grupos, considerando tanto as contribuições de suas interações com os demais colegas quanto comigo, durante uma seqüência didática. A análise das respostas fornecidas pelos estudantes no pré-teste 01, permitiu a elaboração de um segundo instrumento de coleta de dados, o pré-teste 02. As respostas dos estudantes ao pré-teste 02 foram organizadas em categorias, as quais foram comparadas posteriormente, com aquelas provenientes do pós-teste 02. Este estudo foi realizado nas aulas de Ciências de uma turma de 3 Etapa (EJA) de uma Escola Estadual de Ensino Fundamental, com (16) dezesseis alunos que participaram de todas as etapas da pesquisa, dos quais nove são do sexo feminino e sete do sexo masculino. As aulas foram gravadas em fita de vídeo-cassete e em fita cassete comum e após a transcrição das mesmas realizou-se a análise, tendo como critério de seleção dos episódios a forma como quatro alunos que participaram do grupo recombinado 1 em momentos distintos (individual inicial, grupo espontâneo, grupo recombinado e individual final) construíram, individualmente e na interação com o professor, uma resposta escrita consensual para a questão: Comparando todos os episódios do vídeo assistido, você acha que existe alguma semelhança entre essas relações? Por que? Os resultados evidenciaram que dos dezesseis (16) estudantes que participaram de todas as etapas do processo, nove demonstraram melhoria do perfil conceitual e sete alunos apresentaram respostas finais que foram classificadas na mesma categoria de suas respostas iniciais, dentre estes, três tiveram suas respostas classificadas na categoria mais avançada (D), dois nas categorias intermediárias (um em B e outro em C) e dois na categoria mais afastada (A) do conceito científico de competição. Os quatro estudantes selecionados para análise chegaram, ao final, a uma generalização para questão proposta, partindo de explicações fundamentadas, algumas vezes, em generalizações ou explicações que incorporavam termos teóricos, com ou sem domínio conceitual, demonstrando que eles não se apropriaram da mesma forma dos elementos apresentados nas respostas dos grupos que eles haviam participado.

O Programa Escola de Tempo Integral na região de Assis: implicações para a qualidade do ensino

Pós-graduação em Educação - FFC

Avaliação do tecido mamário em mulheres na pós-menopausa usuárias de isoflavona da soja

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Densidade mineral óssea de adolescentes sobrepesos, obesos e superobesos: o impacto do excesso de gordura corporal sobre a massa óssea

Pós-graduação em Ginecologia, Obstetrícia e Mastologia - FMB

Condições de nascimento de recém-nascidos a termo em município de médio porte do interior paulista

Pós-graduação em Enfermagem (mestrado profissional) - FMB

A formação do conceito de ontologia na ciência da informação: uma análise nos periódicos Scire e Ibersid

The concept of ontoloy as a tool for knowledge organization and representation, which is not yet stable, is analyzed in two spanish journals of information science, namely “Scire: representación y organización del conocimiento” and “Ibersid: revista de sistemas de información y documentación”, both published by the University of Zaragoza. The term "ontology" and its variations were searched in the fields of title, keywords and abstract. A corpus of eighteen articles was obtained. The approaches to ontologies were classified into four categories of analysis: conceptualization, comparison, application and new applications. It was observed that the way which the concept of ontologies is treated in both periodicals is in consonance with their editorial policies. The term ontology is suffering a process of meta-terminologization, from the field of philosophy towards information science, a fact that deserves further and more vertical studies.

Caracterização petrográfica das zonas de alteração hidrotermal associadas aos pegmatitos da mina Bom Futuro, Rondônia

The Bom Futuro tin deposit is located in Ariquemes, north-central state of Rondônia. Since its discovery in the late 80s, the tin deposit of Bom Futuro has been explored and considered one of the leading Brazilian producers of cassiterite, exploring it mainly in secondary deposits (placers) in the vicinity of the hill Bom Futuro. The primary mineralization occurs in the contacts between quartz veins and pegmatites with the rocks of the hill and its exploitation has been the goal of new studies in the area. These bodies occur in all rock types of the hill, leading edges of hydrothermal alteration with each rock. The focus of the study is the characterization of hydrothermal alteration through the analysis of the edges of pegmatitic veins intruded on each of the main rock types found on the hill Bom Futuro, which are: biotite gneiss, biotite amphibolite, subvolcanic breccia, topaz leucogranite, topaz leucoriolito and micro melassienito porphyry. The analysis and comparison showed familiarities between the edges of alteration encountered, and possible subdivision into three main zones: the inner zone or the vein itself, intermediate zone or transition zone and the change zone where the passage of hydrothermal features to rocks features is gradual. The cassiterite and sphalerite were found scattered in three zones, however in larger quantities in the intermediate zone, near the contact

Análise das proporções faciais e sua relação com o formato dentário e com a dimensão vertical de repouso e de oclusão entre discentes institucionalizados

Considering the importance of the esthetic and the adequate register of vertical dimension (VD) to the oral rehabilitation, this study had as aims the analysis and comparison of two methods to get VD (Pleasure and Willis), functional space (FE), acquisition and correlation of facial and dental measurements. To do this, rest (RVD) and occlusal vertical dimension (OVD) and FE were achieved from the 30 students of the Federal University of Goias College of Dentistry. Following that, dental measurements of height and of the superior central incisors (SCI) and canine distance were registered. A facial analysis was performed to get the intercomissura, interalar, interpupilar, intercantal distance, besides register parameters as coincidence of dental and facial line, type of smile, face and SCI forms, and mastication type. The collected data were tabulated, compared by medias and standard deviations, and submitted to non-parametrical statistical analysis of Kruskal-Wallis and .Mann-Whitney with 5% of probability. The results doesn’t indicated statistical significant difference between FE of the two techniques. The measures of facial analysis are comparable with literature published data’s, but can’t be used as a parameter to the selection of intercanine distance. In 56.7% of the cases, there were coincidences of face and SCI forms, which could be a viable parameter in the selection of acrylic resin artificial tooth.

Estresse, ansiedade e qualidade de vida em professores: efeitos do relaxamento progressivo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise e comparação de orelhamento na liga AA3104 após laminação a quente

Aluminum has been widely used in the forming and manufacture of beverage cans, specific aluminum alloy AA3104, which manufacturers are increasingly demanding as to mechanical properties, quality and reducing waste. This work describes the analysis and comparison of the behavior of earing AA3104 aluminum alloy samples of final thicknesses of 1.80 and 2.10 mm. Were obtained after a hot rolling process, a total population of 86 samples for the two different thicknesses, of which 23 samples of 1.80 mm and 2.10 mm 63 samples. After removal of samples, there was a mechanical test inlay, then characterizing the earing in them. The results earing to the thicknesses of 1.80 and 2.10 mm were analyzed and compared statistically to give 7.1% and 7.4% on average, respectively, correlated with the hot rolling process variables, showing that they are statistically equal and that the process variables do not affect the end result desired, ranging from 7.0 to 7,5%

Análise e comparação de orelhamento na liga AA3104 após laminação a quente

Aluminum has been widely used in the forming and manufacture of beverage cans, specific aluminum alloy AA3104, which manufacturers are increasingly demanding as to mechanical properties, quality and reducing waste. This work describes the analysis and comparison of the behavior of earing AA3104 aluminum alloy samples of final thicknesses of 1.80 and 2.10 mm. Were obtained after a hot rolling process, a total population of 86 samples for the two different thicknesses, of which 23 samples of 1.80 mm and 2.10 mm 63 samples. After removal of samples, there was a mechanical test inlay, then characterizing the earing in them. The results earing to the thicknesses of 1.80 and 2.10 mm were analyzed and compared statistically to give 7.1% and 7.4% on average, respectively, correlated with the hot rolling process variables, showing that they are statistically equal and that the process variables do not affect the end result desired, ranging from 7.0 to 7,5%

Identification of 2 Novel ANTXR2 Mutations in Patients With Hyaline Fibromatosis Syndrome and Proposal of a Modified Grading System

Juvenile hyaline fibromatosis (JHF) and infantile systemic hyalinosis (ISH) are rare, autosomal recessive disorders of the connective tissue caused by mutations in the gene encoding the anthrax toxin receptor 2 protein (ANTXR2) located on chromosome 4q21. Characteristically, these conditions present with overlapping clinical features, such as nodules and/or pearly papules, gingival hyperplasia, flexion contractures of the joints, and osteolytic bone defects. The present report describes a pair of sibs and three other JHF/ISH patients whose diagnoses were based on typical clinical manifestations and confirmed by histopathologic analyses and/or molecular analysis. A comparison of ISH and JHF, additional thoughts about new terminology (hyaline fibromatosis syndrome) and a modified grading system are also included. (C) 2012 Wiley Periodicals, Inc.

Implant Stability Measurements of Two Immediate Loading Protocols for the Edentulous Mandible: Rigid and Semi-rigid Splinting of the Implants

Aim: Primary and secondary stabilities of immediately loaded mandibular implants restored with fixed prostheses (FP) using rigid or semirigid splinting systems were clinically and radiographically evaluated. Methods: Fifteen edentulous patients were rehabilitated using hybrid FP; each had 5 implants placed between the mental foramens. Two groups were randomly divided: group 1-FP with the conventional rigid bar splinting the implants and group 2-semi-rigid cantilever extension system with titanium bars placed in the 2 distal abutment cylinders. Primary stability was evaluated using resonance frequency analysis after installation of the implant abutments. The measurements were made at 3 times: T0, at baseline; T1, 4 months after implant placement; and T2, 8 months after implant placement. Presence of mobility and inflammation in the implant surrounding regions were checked. Stability data were submitted to statistical analysis for comparison between groups (P, 0.05). Results: Implant survival rate for the implants was of 100% in both groups. No significant differences in the mean implant stability quotient values were found for both groups from baseline and after the 8-month follow-up. Conclusion: The immediate loading of the implants was satisfactory, and both splinting conditions (rigid and semi-rigid) can be successfully used for the restoration of edentulous mandibles. (Implant Dent 2012;21:486-490)

Evaluation of reference-based two-color methods for measurement of gene expression ratios using spotted cDNA microarrays

Abstract Background Spotted cDNA microarrays generally employ co-hybridization of fluorescently-labeled RNA targets to produce gene expression ratios for subsequent analysis. Direct comparison of two RNA samples in the same microarray provides the highest level of accuracy; however, due to the number of combinatorial pair-wise comparisons, the direct method is impractical for studies including large number of individual samples (e.g., tumor classification studies). For such studies, indirect comparisons using a common reference standard have been the preferred method. Here we evaluated the precision and accuracy of reconstructed ratios from three indirect methods relative to ratios obtained from direct hybridizations, herein considered as the gold-standard. Results We performed hybridizations using a fixed amount of Cy3-labeled reference oligonucleotide (RefOligo) against distinct Cy5-labeled targets from prostate, breast and kidney tumor samples. Reconstructed ratios between all tissue pairs were derived from ratios between each tissue sample and RefOligo. Reconstructed ratios were compared to (i) ratios obtained in parallel from direct pair-wise hybridizations of tissue samples, and to (ii) reconstructed ratios derived from hybridization of each tissue against a reference RNA pool (RefPool). To evaluate the effect of the external references, reconstructed ratios were also calculated directly from intensity values of single-channel (One-Color) measurements derived from tissue sample data collected in the RefOligo experiments. We show that the average coefficient of variation of ratios between intra- and inter-slide replicates derived from RefOligo, RefPool and One-Color were similar and 2 to 4-fold higher than ratios obtained in direct hybridizations. Correlation coefficients calculated for all three tissue comparisons were also similar. In addition, the performance of all indirect methods in terms of their robustness to identify genes deemed as differentially expressed based on direct hybridizations, as well as false-positive and false-negative rates, were found to be comparable. Conclusion RefOligo produces ratios as precise and accurate as ratios reconstructed from a RNA pool, thus representing a reliable alternative in reference-based hybridization experiments. In addition, One-Color measurements alone can reconstruct expression ratios without loss in precision or accuracy. We conclude that both methods are adequate options in large-scale projects where the amount of a common reference RNA pool is usually restrictive.

Genetic diversity of the E Protein of Dengue Type 3 Virus

Abstract Background Dengue is the most important arbovirus disease in tropical and subtropical countries. The viral envelope (E) protein is responsible for cell receptor binding and is the main target of neutralizing antibodies. The aim of this study was to analyze the diversity of the E protein gene of DENV-3. E protein gene sequences of 20 new viruses isolated in Ribeirao Preto, Brazil, and 427 sequences retrieved from GenBank were aligned for diversity and phylogenetic analysis. Results Comparison of the E protein gene sequences revealed the presence of 47 variable sites distributed in the protein; most of those amino acids changes are located on the viral surface. The phylogenetic analysis showed the distribution of DENV-3 in four genotypes. Genotypes I, II and III revealed internal groups that we have called lineages and sub-lineages. All amino acids that characterize a group (genotype, lineage, or sub-lineage) are located in the 47 variable sites of the E protein. Conclusion Our results provide information about the most frequent amino acid changes and diversity of the E protein of DENV-3.