Location management and routing in urban vehicular ad hoc networks

In recent years, urban vehicular ad hoc networks (VANETs) are gaining importance for inter-vehicle communication, because they allow for the local communication between vehicles without any infrastructure, configuration effort, and without expensive cellular networks. But such architecture may increase the complexity of routing since there is no central control system in urban VANETs. Therefore, a challenging research task is to improve urban VANETs' routing efficiency. ^ Hence, in this dissertation we propose two location-based routing protocols and a location management protocol to facilitate location-based routing in urban VANETs. The Multi-hop Routing Protocol (MURU) is proposed to make use of predicted mobility and geometry map in urban VANETs to estimate a path's life time and set up robust end-to-end routing paths. The Light-weight Routing Protocol (LIRU) is proposed to take advantage of the node diversity under dynamic channel condition to exploit opportunistic forwarding to achieve efficient data delivery. A scalable location management protocol (MALM) is also proposed to support location-based routing protocols in urban VANETs. MALM uses high mobility in VANETs to help disseminate vehicles' historical location information, and a vehicle is able to implement Kalman-filter based predicted to predict another vehicle's current location based on its historical location information. ^

Opportunistic Contact Graph Routing

L'ambiente di questa tesi è quello del Delay and Disruption Tolerant Networks (DTN), un'architettura di rete di telecomunicazioni avente come obiettivo le comunicazioni tra nodi di reti dette “challenged”, le quali devono affrontare problemi come tempi di propagazione elevati, alto tasso di errore e periodi di perdita delle connessioni. Il Bunde layer, un nuovo livello inserito tra trasporto e applicazione nell’architettura ISO/OSI, ed il protocollo ad esso associato, il Bundle Protocol (BP), sono stati progettati per rendere possibili le comunicazioni in queste reti. A volte fra la ricezione e l’invio può trascorrere un lungo periodo di tempo, a causa della indisponibilità del collegamento successivo; in questo periodo il bundle resta memorizzato in un database locale. Esistono varie implementazioni dell'architettura DTN come DTN2, implementazione di riferimento, e ION (Interplanetary Overlay Network), sviluppata da NASA JPL, per utilizzo in applicazioni spaziali; in esse i contatti tra i nodi sono deterministici, a differenza delle reti terrestri nelle quali i contatti sono generalmente opportunistici (non noti a priori). Per questo motivo all’interno di ION è presente un algoritmo di routing, detto CGR (Contact Graph Routing), progettato per operare in ambienti con connettività deterministica. È in fase di ricerca un algoritmo che opera in ambienti non deterministici, OCGR (Opportunistic Contact Graph Routing), che estende CGR. L’obiettivo di questa tesi è quello di fornire una descrizione dettagliata del funzionamento di OCGR, partendo necessariamente da CGR sul quale è basato, eseguire dei test preliminari, richiesti da NASA JPL, ed analizzarne i risultati per verificare la possibilità di utilizzo e miglioramento dell’algoritmo. Sarà inoltre descritto l’ambiente DTN e i principali algoritmi di routing per ambienti opportunistici. Nella parte conclusiva sarà presentato il simulatore DTN “The ONE” e l’integrazione di CGR e OCGR al suo interno.

STATISTICAL METHODS FOR ADVANCED ECONOMETRIC MODELS WITH APPLICATIONS TO VEHICLE HOLDING AND SPEED QUANTILES DISTRIBUTION

This dissertation proposes statistical methods to formulate, estimate and apply complex transportation models. Two main problems are part of the analyses conducted and presented in this dissertation. The first method solves an econometric problem and is concerned with the joint estimation of models that contain both discrete and continuous decision variables. The use of ordered models along with a regression is proposed and their effectiveness is evaluated with respect to unordered models. Procedure to calculate and optimize the log-likelihood functions of both discrete-continuous approaches are derived, and difficulties associated with the estimation of unordered models explained. Numerical approximation methods based on the Genz algortithm are implemented in order to solve the multidimensional integral associated with the unordered modeling structure. The problems deriving from the lack of smoothness of the probit model around the maximum of the log-likelihood function, which makes the optimization and the calculation of standard deviations very difficult, are carefully analyzed. A methodology to perform out-of-sample validation in the context of a joint model is proposed. Comprehensive numerical experiments have been conducted on both simulated and real data. In particular, the discrete-continuous models are estimated and applied to vehicle ownership and use models on data extracted from the 2009 National Household Travel Survey. The second part of this work offers a comprehensive statistical analysis of free-flow speed distribution; the method is applied to data collected on a sample of roads in Italy. A linear mixed model that includes speed quantiles in its predictors is estimated. Results show that there is no road effect in the analysis of free-flow speeds, which is particularly important for model transferability. A very general framework to predict random effects with few observations and incomplete access to model covariates is formulated and applied to predict the distribution of free-flow speed quantiles. The speed distribution of most road sections is successfully predicted; jack-knife estimates are calculated and used to explain why some sections are poorly predicted. Eventually, this work contributes to the literature in transportation modeling by proposing econometric model formulations for discrete-continuous variables, more efficient methods for the calculation of multivariate normal probabilities, and random effects models for free-flow speed estimation that takes into account the survey design. All methods are rigorously validated on both real and simulated data.

Studio del ciclo di assemblaggio attraverso l'applicazione di algoritmi euristici e sua applicazione al montaggio di una bicicletta elettrica

Il presente elaborato si propone di raccogliere e dettagliare il lavoro svolto presso l’azienda Motori Minarelli durante il tirocinio curricolare. Minarelli ha dato l’avvio ad un nuovo progetto di nome ISSIMO e conseguentemente si è trovata ad approcciare una nuova tipologia di prodotto da assemblare attraverso linea di montaggio: una bicicletta elettrica. Il compito dell’azienda bolognese era quello di progettare e implementare la linea produttiva per la commercializzazione dell’e-bike. Al giorno d’oggi una buona progettazione del ciclo produttivo è alla base per la generazione di prodotti eccellenti e di qualità, per questo il ciclo di assemblaggio è stato definito tramite l’applicazione di una serie di algoritmi euristici di line balancing, per definire la struttura della linea di montaggio e la sequenza di produzione. Si è divisa la trattazione in quattro parti distinte: la prima parte è una analisi storica che parte dalla nascita della catena di montaggio sino alla teoria degli algoritmi di bilanciamento; la seconda parte permette di calarsi nel contesto aziendale; la terza parte dettaglia il progetto ISSIMO nei dettagli e la quarta parte, quella sperimentale, mostra l’applicazione degli algoritmi alla linea di assemblaggio in esame.

Procedure di Programmazione Dinamica per Determinare le K Migliori Soluzioni del Knapsack Problem 0-1 e dello Shortest Path Problem

In questa tesi viene trattata la problematica di determinare le migliori K soluzioni per due problemi di ottimizzazione, il Knapsack Problem 0-1 e lo Shortest Path Problem. Tali soluzioni possono essere impiegate all'interno di metodi di column generation per la risoluzione di problemi reali, ad esempio Bin Packing Problems e problemi di scheduling di veicoli ed equipaggi. Sono stati implementati, per verificarne sperimentalmente le prestazioni, nuovi algoritmi di programmazione dinamica, sviluppati nell’ambito di un programma di ricerca. Inizialmente, per entrambi i problemi, è stato descritto un algoritmo che determinasse le migliori K soluzioni per ogni possibile sottoproblema; partendo da uno zaino con capacità nulla, nel caso del Knapsack Problem 0-1, e dalla determinazione di un cammino dal vertice sorgente in se stesso per lo Shortest Path Problem, l’algoritmo determina le migliori soluzioni di sottoproblemi via via sempre più grandi, utilizzando le soluzioni costruite per gli stati precedenti, fino a ottenere le migliori soluzioni del problema globale. Successivamente, è stato definito un algoritmo basato su un approccio di ricorsione backward; in questo caso si utilizza una funzione ricorsiva che, chiamata a partire dallo stato corrispondente al problema globale, viene richiamata solo sugli stati intermedi strettamente necessari, e per ognuno di essi non vengono determinate soluzioni superflue.

A Multilevel Gradient Method for Optimization Problems

I problemi di ottimizzazione di dimensione finita di larga scala spesso derivano dalla discretizzazione di problemi di dimensione infinita. È perciò possibile descrivere il problema di ottimizzazione su più livelli discreti. Lavorando su un livello più basso di quello del problema considerato, si possono calcolare soluzioni approssimate che saranno poi punti di partenza per il problema di ottimizzazione al livello più fine. I metodi multilivello, già ampiamente presenti in letteratura a partire dagli anni Novanta, sfruttano tale caratteristica dei problemi di ottimizzazione per migliorare le prestazioni dei metodi di ottimizzazione standard. L’obiettivo di questa tesi è quello di implementare una variante multilivello del metodo del gradiente (MGM) e di testarlo su due diversi campi: la risoluzione delle Equazioni alle Derivate Parziali la ricostruzione di immagini. In questo elaborato viene illustrata la teoria dello schema multilivello e presentato l’algoritmo di MGM utilizzato nei nostri esperimenti. Sono poi discusse le modalità di utilizzo di MGM per i due problemi sopra presentati. Per il problema PDE, i risultati ottenuti mostrano un ottimo comportamento di MGM rispetto alla implementazione classica ad un livello. I risultati ottenuti per il problema di ricostruzione di immagini, al contrario delle PDEs, evidenziano come MGM sia efficace solo in determinate condizioni.

Sintesi ed ottimizzazione di una pressa a ginocchiera per stampaggio di materiale plastico

L’elaborato affronta l’ottimizzazione di una pressa a doppia ginocchiera a 5 punti impiegata nello stampaggio a iniezione. Il processo di ottimizzazione coinvolge la sintesi dimensionale dei membri del meccanismo e la pianificazione della traiettoria del suo organo cedente. L’obiettivo finale è di ottenere una geometria del meccanismo ed una legge oraria che minimizzino il picco di coppia richiesto all’attuatore, oltre a rispettare i vincoli fisici dell’applicazione (ingombri, velocità massima, forza massima, ecc.). La soluzione ottima viene raggiunta applicando in serie l’algoritmo genetico e l’algoritmo SQP (programmazione quadratica sequenziale) ad un modello dinamico rigido del meccanismo. I due algoritmi vengono scelti in quanto efficaci nel risolvere un problema di ottimizzazione vincolato. Per quanto riguarda la loro applicazione in serie, l’algoritmo genetico permette l’esplorazione dello spazio di progettazione e l’individuazione di una soluzione "buona", a partire da questa l’algoritmo SQP trova l’ottimo locale. L’intero processo di modellazione ed ottimizzazione è implementato tramite il software MATLAB. I risultati sono validati con un software di analisi dinamica (SolidWorks Motion) ed in parte in maniera sperimentale. Infine, la soluzione attuale viene confrontata con quelle ottenute. Il confronto è descritto nel dettaglio nella Sezione 6.5 ed in forma riassuntiva nella Sezione 6.5.5.

Impact Of Pharmacist Interventions On Drug-related Problems And Laboratory Markers In Outpatients With Human Immunodeficiency Virus Infection.

Substantial complexity has been introduced into treatment regimens for patients with human immunodeficiency virus (HIV) infection. Many drug-related problems (DRPs) are detected in these patients, such as low adherence, therapeutic inefficacy, and safety issues. We evaluated the impact of pharmacist interventions on CD4+ T-lymphocyte count, HIV viral load, and DRPs in patients with HIV infection. In this 18-month prospective controlled study, 90 outpatients were selected by convenience sampling from the Hospital Dia-University of Campinas Teaching Hospital (Brazil). Forty-five patients comprised the pharmacist intervention group and 45 the control group; all patients had HIV infection with or without acquired immunodeficiency syndrome. Pharmaceutical appointments were conducted based on the Pharmacotherapy Workup method, although DRPs and pharmacist intervention classifications were modified for applicability to institutional service limitations and research requirements. Pharmacist interventions were performed immediately after detection of DRPs. The main outcome measures were DRPs, CD4+ T-lymphocyte count, and HIV viral load. After pharmacist intervention, DRPs decreased from 5.2 (95% confidence interval [CI] =4.1-6.2) to 4.2 (95% CI =3.3-5.1) per patient (P=0.043). A total of 122 pharmacist interventions were proposed, with an average of 2.7 interventions per patient. All the pharmacist interventions were accepted by physicians, and among patients, the interventions were well accepted during the appointments, but compliance with the interventions was not measured. A statistically significant increase in CD4+ T-lymphocyte count in the intervention group was found (260.7 cells/mm(3) [95% CI =175.8-345.6] to 312.0 cells/mm(3) [95% CI =23.5-40.6], P=0.015), which was not observed in the control group. There was no statistical difference between the groups regarding HIV viral load. This study suggests that pharmacist interventions in patients with HIV infection can cause an increase in CD4+ T-lymphocyte counts and a decrease in DRPs, demonstrating the importance of an optimal pharmaceutical care plan.

Graded Meshes In Bio-thermal Problems With Transmission-line Modeling Method.

In this study, the transmission-line modeling (TLM) applied to bio-thermal problems was improved by incorporating several novel computational techniques, which include application of graded meshes which resulted in 9 times faster in computational time and uses only a fraction (16%) of the computational resources used by regular meshes in analyzing heat flow through heterogeneous media. Graded meshes, unlike regular meshes, allow heat sources to be modeled in all segments of the mesh. A new boundary condition that considers thermal properties and thus resulting in a more realistic modeling of complex problems is introduced. Also, a new way of calculating an error parameter is introduced. The calculated temperatures between nodes were compared against the results obtained from the literature and agreed within less than 1% difference. It is reasonable, therefore, to conclude that the improved TLM model described herein has great potential in heat transfer of biological systems.

[access To Information About How To Prevent Oral Problems Among School Children In The Public School Network].

The scope of this study is to identify the prevalence of access to information about how to prevent oral problems among schoolchildren in the public school network, as well as the factors associated with such access. This is a cross-sectional and analytical study conducted among 12-year-old schoolchildren in a Brazilian municipality with a large population. The examinations were performed by 24 trained dentists and calibrated with the aid of 24 recorders. Data collection occurred in 36 public schools selected from the 89 public schools of the city. Descriptive, univariate and multiple analyses were conducted. Of the 2510 schoolchildren included in the study, 2211 reported having received information about how to prevent oral problems. Access to such information was greater among those who used private dental services; and lower among those who used the service for treatment, who evaluated the service as regular or bad/awful. The latter use toothbrush only or toothbrush and tongue scrubbing as a means of oral hygiene and who reported not being satisfied with the appearance of their teeth. The conclusion drawn is that the majority of schoolchildren had access to information about how to prevent oral problems, though access was associated with the characteristics of health services, health behavior and outcomes.

Trends and strategies of ozone application in environmental problems

Efforts presented by the scientific community in recent years towards the development of numerous green chemical processes and wastewater treatment technologies are presented and discussed. In the light of these approaches, environmentally friendly technologies, as well as the key role played by the well-known advanced oxidation processes, are discussed, giving special attention to the ones comprising ozone applications. Fundamentals and applied aspects dealing with ozone technology and its application are also presented.

Educação pelo lazer : valores que envolvem a relação adulto-criança

Universidade Estadual de Campinas . Faculdade de Educação Física

Changes in parents' and self-reports of behavioral problems in Brazilian adolescents after behavioral treatment with urine alarm for nocturnal enuresis

PURPOSE: Compare parents' reports of youth problems (PRYP) with adolescent problems self-reports (APSR) pre/post behavioral treatment of nocturnal enuresis (NE) based on the use of a urine alarm. MATERIALS AND METHODS: Adolescents (N = 19) with mono-symptomatic (primary or secondary) nocturnal enuresis group treatment for 40 weeks. Discharge criterion was established as 8 weeks with consecutive dry nights. PRYP and APSR were scored by the Child Behavior Checklist (CBCL) and Youth Self-Report (YSR). RESULTS: Pre-treatment data: 1) Higher number of clinical cases based on parent report than on self-report for Internalizing Problems (IP) (13/19 vs. 4/19), Externalizing Problems (EP) (7/19 vs. 5/19) and Total Problem (TP) (11/19 vs. 5/19); 2) Mean PRYP scores for IP (60.8) and TP (61) were within the deviant range (T score ≥ 60); while mean PRYP scores for EP (57.4) and mean APSR scores (IP = 52.4, EP = 49.5, TP = 52.4) were within the normal range. Difference between PRYP' and APSR' scores was significant. Post treatment data: 1) Discharge for majority of the participants (16/19); 2) Reduction in the number of clinical cases on parental evaluation: 9/19 adolescents remained within clinical range for IP, 2/19 for EP, and 7/19 for TP. 3) All post-treatment mean scores were within the normal range; the difference between pre and post evaluation scores was significant for PRYP. CONCLUSIONS: The behavioral treatment based on the use of urine alarm is effective for adolescents with mono-symptomatic (primary and secondary) nocturnal enuresis. The study favors the hypothesis that enuresis is a cause, not a consequence, of other behavioral problems.

Combining Legendre's Polynomials and Genetic Algorithm in the Solution of Nonlinear Initial-Value Problems

This work develops a method for solving ordinary differential equations, that is, initial-value problems, with solutions approximated by using Legendre's polynomials. An iterative procedure for the adjustment of the polynomial coefficients is developed, based on the genetic algorithm. This procedure is applied to several examples providing comparisons between its results and the best polynomial fitting when numerical solutions by the traditional Runge-Kutta or Adams methods are available. The resulting algorithm provides reliable solutions even if the numerical solutions are not available, that is, when the mass matrix is singular or the equation produces unstable running processes.

Social interaction as a heuristic for combinatorial optimization problems

We investigate the performance of a variant of Axelrod's model for dissemination of culture-the Adaptive Culture Heuristic (ACH)-on solving an NP-Complete optimization problem, namely, the classification of binary input patterns of size F by a Boolean Binary Perceptron. In this heuristic, N agents, characterized by binary strings of length F which represent possible solutions to the optimization problem, are fixed at the sites of a square lattice and interact with their nearest neighbors only. The interactions are such that the agents' strings (or cultures) become more similar to the low-cost strings of their neighbors resulting in the dissemination of these strings across the lattice. Eventually the dynamics freezes into a homogeneous absorbing configuration in which all agents exhibit identical solutions to the optimization problem. We find through extensive simulations that the probability of finding the optimal solution is a function of the reduced variable F/N(1/4) so that the number of agents must increase with the fourth power of the problem size, N proportional to F(4), to guarantee a fixed probability of success. In this case, we find that the relaxation time to reach an absorbing configuration scales with F(6) which can be interpreted as the overall computational cost of the ACH to find an optimal set of weights for a Boolean binary perceptron, given a fixed probability of success.