Effect of Ni-Zr codoping on dielectric and magnetic properties of SrFe12O19 via sol-gel route

Nanocrystalline strontium hexaferrites SrFe12-2x (Ni2+-Zr4+)(x)O-19] nanoparticles were successfully synthesized by sal gel process. For densification the powders were sintered at 950 degrees C/4 h. The sintered samples were characterized by X-ray diffraction (XRD), surface area measurement, and field emission scanning electron microscope (FESEM). The lattice parameter a is almost constant but c increased with x upto 0.8 and then decreased. The frequency dependent complex permittivity (epsilon and epsilon `' and permeability (mu' and mu `') and magnetic properties such as saturation magnetization (M-s), coercive field (H-c) were studied. If is observed that saturation magnetization increased gradually from 57.82 emuig to 67.2 emufg as x increased from 0.2 to 0.4 and then decreased from 672 emufg to 31.63 ernufg for x=1.0. In present study, x=0.4 shows high value of M-s 67.2 emu/g. The real part of permittivity (epsilon') remains constant upto a frequency 1 GHz and increases further with an increase of frequency, a resonance and anti resonance peak was observed above 1 GHz for all the samples. In real part of permeability (mu') the relaxation frequency is observed above 1 GHz for all the samples and it is attributed to the domain wall motion. It is well known that the permeability for polycrystalline ferrites can be described as the superposition of two different magnetizing mechanisms: spin rotation and domain wall motion. These low coercive strontium hexaferrites are suitable for magnetic recording applications in hard disks, floppy disks, video tapes, etc. (C) 2015 Elsevier B.V. All rights reserved.

High-Temperature Deformation Processing Map Approach for Obtaining the Desired Microstructure in a Multi-component (Ni-Ti-Cu-Fe) Alloy

An equiatomic NiTiCuFe multi-component alloy with simple body-centered cubic (bcc) and face-centered cubic solid-solution phases in the microstructure was processed by vacuum induction melting furnace under dynamic Ar atmosphere. High-temperature uniaxial compression experiments were conducted on it in the temperature range of 1073 K to 1303 K (800 degrees C to 1030 degrees C) and strain rate range of 10(-3) to 10(-1) s(-1). The data generated were analyzed with the aid of the dynamic materials model through which power dissipation efficiency and instability maps were generated so as to identify the governing deformation mechanisms that are operative in different temperature-strain rate regimes with the aid of complementary microstructural analysis of the deformed specimens. Results indicate that the stable domain for the high temperature deformation of the multi-component alloy occurs in the temperature range of 1173 K to 1303 K (900 degrees C to 1030 degrees C) and (epsilon) over dot range of 10(-3) to 10(-1.2) s(-1), and the deformation is unstable at T = 1073 K to 1153 K (800 degrees C to 880 degrees C) and (epsilon) over dot = 10(-3) to 10(-1.4) s(-1) as well as T = 1223 K to 1293 K (950 degrees C to 1020 degrees C) and (epsilon) over dot = 10(-1.4) to 10(-1) s(-1), with adiabatic shear banding, localized plastic flow, or cracking being the unstable mechanisms. A constitutive equation that describes the flow stress of NiTiCuFe multi-component alloy as a function of strain rate and deformation temperature was also determined. (C) The Minerals, Metals & Materials Society and ASM International 2015

Effect of processing route on phase stability in equiatomic multicomponent Ti20Fe20Ni20Co20Cu20 high entropy alloy

The evolution of microstructure and phase formation in equiatomic Ti20Fe20Ni20Co20Cu20 high entropy alloy synthesised by conventional arc melting followed with suction casting and ball milling with spark plasma sintering route is distinctly different. The cast microstructure exhibits one body centre cubic and two face centre cubic high entropy phases based on titanium, cobalt and copper respectively along with a eutectic containing Ti2Ni type Laves phase. On the contrary, spinodal decomposed microstructure consisting of cobalt and copper solid solution is obtained in the sintered sample. However, long term annealing of cast sample at 950 degrees C reveals a eutectoid transformation with different phases than the cast sample. The aforementioned observations are discussed using CALPHAD thermodynamical approach and available literature.

Crystallographic studies of the extracytoplasmic function sigma factor sigma(J) from Mycobacterium tuberculosis

Mycobacterium tuberculosis has multiple sigma factors which enable the bacterium to reprogram its transcriptional machinery under diverse environmental conditions. sigma(J), an extracytoplasmic function sigma factor, is upregulated in late stationary phase cultures and during human macrophage infection. sigma(J) governs the cellular response to hydrogen peroxide-mediated oxidative stress. sigma(J) differs from other canonical sigma factors owing to the presence of a SnoaL_2 domain at the C-terminus. sigma(J) crystals belonged to the tetragonal space group I422, with unit-cell parameters a = b = 133.85, c = 75.08 angstrom. Diffraction data were collected to 2.16 angstrom resolution on the BM14 beamline at the European Synchrotron Radiation Facility (ESRF).

Linking monazite geochronology with fluid infiltration and metamorphic histories: Nature and experiment

Migmatised metapelites from the Kodaikanal region, central Madurai Block, southern India have undergone ultrahigh-temperature metamorphism (950-1000 degrees C; 7-8 kbar). In-situ electron microprobe Th-U-Pb isochron (CHIME) dating of monazites in a leucosome and surrounding silica-saturated and silica-poor restites from the same outcrop indicates three principal ages that can be linked to the evolutionary history of these rocks. Monazite grains from the silica-saturated restite have well-defined, inherited cores with thick rims that yield an age of ca. 1684 Ma. This either dates the metamorphism of the original metapelite or is a detrital age of inherited monazite. Monazite grains from the silica-poor restite, thick rims from the silica-saturated restite, and monazite cores from the leucosome have ages ranging from 520 to 540 Ma suggesting a mean age of 530 Ma within the error bars. In the leucosome the altered rim of the monazite gives an age of ca. 502 Ma. Alteration takes the form of Th-depleted lobes of monazite with sharp curvilinear boundaries extending from the monazite grain rim into the core. We have replicated experimentally these altered rims in a monazite-leucosome experiment at 800 degrees C and 2 kbar. This experiment, coupled with earlier published monazite-fluid experiments involving high pH alkali-bearing fluids at high P-T, helps to confirm the idea that alkali-bearing fluids, in the melt and along grain boundaries during crystallization, were responsible for the formation of the altered monazite grain rims via the process of coupled dissolution-reprecipitation. (C) 2015 Elsevier B.V. All rights reserved.

Effect of dark matter halo on global spiral modes in galaxies

Low surface brightness (LSB) galaxies form a major class of galaxies, and are characterized by low disc surface density and low star formation rate. These are known to be dominated by dark matter halo from the innermost regions. Here, we study the role of the dark matter halo on the grand-design, m = 2, spiral modes in a galactic disc by carrying out a global mode analysis in the WKB approximation. The Bohr-Sommerfeld quantization rule is used to determine how many discrete global spiral modes are permitted. First, a typical superthin, LSB galaxy UGC 7321 is studied by taking only the galactic disc, modelled as a fluid; and then the disc embedded in a dark matter halo. We find that both cases permit the existence of global spiral modes. This is in contrast to earlier results where the inclusion of dark matter halo was shown to nearly fully suppress local, swing-amplified spiral features. Although technically global modes are permitted in the fluid model as shown here, we argue that due to lack of tidal interactions, these are not triggered in LSB galaxies. For comparison, we carried out a similar analysis for the Galaxy, for which the dark matter halo does not dominate in the inner regions. We show that here too the dark matter halo has little effect, hence the disc embedded in a halo is also able to support global modes. The derived pattern speed of the global mode agrees fairly well with the observed value for the Galaxy.

带有两个非共线裂纹载流薄板的温度场

对于带有两个非共线直线裂纹的无限大载流薄板，当在无穷远处通人均布电流时，由于在裂纹尖端出现绕流和焦耳热集中效应，使裂纹尖端熔化形成焊口，而达到止裂的目的。寻找电流密度与裂纹尖端处热源功率之间的关系，板内温度场的分布状态、裂纹前缘温度值等等，是推广应用电磁热效应对导电体实施裂纹止裂的关键问题。文中采用“伪电流”和“伪热流”的方法，分别得到通电后域内的电流密度分布及温度分布，给出上述问题的解析解，并给出算例。

扩散处理热浸镀铝钢高温抗氧化行为的研究

Effect of diffusion on coating microstructure and oxidation resistance of aluminizing steel

The effect of diffuse treatment on coating microstructure and oxidation resistance at high-temperature of hot-dip aluminum were studied by means of TEM, SEM and XRD. The results show that, the diffusion temperature has significant effect on structure of coatings and its oxidation resistance. After diffusion at 750 degreesC, the coating consists of thick outer surface layer (Fe2Al5+ FeAl2), thin internal layer (FeAl + stripe FeAl2), and its oxidation resistance is poor. After diffusion at 950 degreesC, the outer surface layer is composed of single FeAl2 phase, the internal layer is composed of FeAl phase, and its oxidation resistance declines due to the occurrence of early stage internal oxidation cracks in the coating. After diffusion at 850 degreesC, the outer surface layer becomes thinner and consists of FeAl2 Fe2Al5(small amount), the internal layer becomes thicker and consists of FeAl+spherical FeAl2, and the spheroidized FeAl2 phase in the internal layer and its existing in FeAl phase steadily improve the oxidation resistance of the coating.

Contabilidad y estados contables : implicancias del nuevo ordenamiento del Código Civil y Comercial de la Nación

Resumen: El presente artículo se corresponde con aspectos del nuevo ordenamiento contable establecido en el texto normativo del Código Civil y Comercial de la Nación – Ley 26.994- que entrará en vigencia el 1 de agosto de 2015. Profundizamos el análisis de la parte pertinente a CONTABILIDAD y ESTADOS CONTABLES. (Arts. 320 a 331 y artículos relacionados - Arts.145 a 148). Las novedades más relevantes se refieren a la clasificación de las personas en humanas y jurídicas (públicas y privadas); la definición de los sujetos obligados a llevar registro contable, los excluidos de hacerlo, los libros a emplear, el modo de llevarlos y ciertos requisitos. También incluye disposiciones sobre los Estados Contables y la documentación respaldatoria. Las reformas incluidas en el Código unificado aún no logran dar respuestas a los requerimientos de los profesionales en Ciencias Económicas, que desempeñan un rol protagónico en la aplicación de dichas normas.

Una investigación sobre los principios económicos de Juan Bautista Alberdi y sus vinculaciones con la tradición de la escuela austríaca

Resumen: El Dr. Juan Bautista Alberdi, abogado, jurista, periodista, tratadista de derecho comparado, constitucionalista, economista, legislador y político, es considerado una figura insoslayable en la inspiración de las instituciones políticas, sociales y económicas de la organización nacional de la República Argentina durante el siglo XIX. De hecho se lo sindica como la fuente primaria, principal y casi excluyente de la constitución de la República Argentina que fuera aprobada por el Congreso de 1853, si se toma a sus trabajos de derecho comparado,. Complementariamente, concibió un tratado sobre “El sistema económico y rentístico” que aconsejaba adoptar a la Confederación, en el cual se encuentra una gran cantidad de puntos de vista económicos que se pueden considerar muy relevantes al sistema económico a adoptar por la nación. Con posterioridad, en diferentes fechas, e incluso en forma póstuma, se dieron a conocer más trabajos suyos en los que abordaba cuestiones económicas importantes. Dada su formación, que puede considerarse anterior a la del fundador de la Escuela Austriaca, (ya que, aunque en cierto aspectos fueron contemporáneos, la vida de Alberdi se inicia y termina unos 30 años antes que la de Menger), y considerando la barrera del idioma y otras cuestiones que pueden separarlos, la idea de este trabajo es tratar de investigar sobre los puntos de contacto entre ambas corrientes del pensamiento. La intención de esta investigación es doble: Por un lado, abrir un camino de estudio y dar a conocer a otros ámbitos, el pensamiento del Genial Tucumano, y su vigencia en el tiempo. Por otro lado, y ya, de una mayor complejidad y dando lugar a mayor controversia, analizar otro aspecto. Esto es, si dada la actual revalorización del pensamiento austriaco, especialmente en lo relativo a su teoría del ciclo económico, por un lado, y la proverbial inestabilidad mostrada por la economía argentina, al menos en los últimos 80 años, se puede intentar, retornando a los valores Alberdianos rescatar un ordenamiento institucional, que por encontrarse en la esencia de su pensamiento y por ende ser absolutamente compatible con el espíritu fundacional de nuestra constitución, permita además un fortalecimiento institucional del funcionamiento económico argentino.

Fluctuacion poblacional de la broca del fruto del cafeto hypothenemus hampei Ferr. (Coleoptera: Scolytidae) en tres localidades de la VI region, Nicaragua

Durante el período de los meses de junio 1989 a febrero 1990, se estudió la fluctuación poblacional de la broca del fruto del cafeto Hypothenemus hampei Ferr. en alturas de 950,1000 y 11SO m.s.n.m en la Región VI de Nicaragua. La temperatura en las localidades del estudio oscila entre 18 y 212 C. Las mayores precipitaciones se registran de junio a noviembre y la menor de diciembre a febrero. Los niveles máximos de infestación de broca oscilaron entre 0.5 y 1.55% de frutos brocados encontrandose mayores niveles en las menores alturas donde se observa que el incremento de la población ocurre entre los 107 y 246 días después de la floración principal (ddfp). En las alturas superiores a 1000 m.s.n.m las infestaciones comienzan incrementarse en fechas tardías (141 ddfp). Sin embargo, dichos niveles decrecen al momento de la cosecha. El desarrollo de los diferentes estadíos de H. hampei resultó diferentes en las localidades estudiadas. La producción de huevos se inicia más temprano en las zonas de menor altitude (78 ddfp) en comparación con zonas de mayor altitud (141 ddfp). Las poblaciones de huevos, larvas y pupas aumentan posteriormente con al número de adultos, alcanzando los máximos valores durante la maduración del fruto y disminuyendo al momento final de la cosecha. H. hampei se reproduce en frutos semiconsistentes, consistentes y maduros, sin embargo, se puede encontrar adultos de broca en los canales de penetración en los frutos en estado lechoso.

Combustion and Ignition of Thermally Cracked Kerosene in Supersonic Model Combustors

A series of experiments were conducted to characterize the self-ignition and combustion of thermally cracked kerosene in both a Mach 2.5 model combustor with a combustor entrance height of 51 mm and a Mach 3.0 model combustor with an entrance height of 70 mm. A unique kerosene heating and delivery system was developed, which can prepare heated kerosene up to 950 K at a pressure of 5.5 MPa with negligible fuel coking. The extent of China no. 3 kerosene conversion under supercritical conditions was measured using a specially designed system. The compositions of gaseous products as a result of thermal cracking were analyzed using gas chromatography. The mass flow rates of cracked kerosene were also calibrated and measured using sonic nozzles. With the injection of thermally cracked kerosene, the ability to achieve enhanced combustion performance was demonstrated under a variety of airflow and fuel conditions. Furthermore, self-ignition tests of cracked kerosene in a Mach 2.5 model combustor over a range of fuel injection conditions and with the help of different amounts of pilot hydrogen were conducted and discussed.

De la inconmensurabilidad a la multimodalidad, un camino sin cisuras

Resumen: Una característica frecuente de algunos problemas de decisión económicos es que presentan múltiples objetivos que no pueden medirse en una misma unidad común. En esos casos no hay una función de utilidad que mida en forma similar objetivos de diferente naturaleza y los problemas no son posibles de resolver completamente por puras herramientas matemáticas, ya que su solución implica la introducción de factores subjetivos y condicionantes de todo tipo: religiosos, éticos, jurídicos, institucionales, biológicos, físicos, etcétera. La tendencia hacia el estudio de la complejidad de las decisiones en general –y las económicas en particular- y la necesidad de poder representar esta complejidad, es una característica distintiva de los procesos de decisión contemporáneos. Ampliando la perspectiva de la inconmensurabilidad, pero recurriendo a la experiencia que ella aporta, el pensamiento multimodal ofrece la posibilidad de colaborar con estos procesos de decisión complejos. En el presente trabajo comenzamos por una revisión de los procesos de decisión con múltiples objetivos inconmensurables y avanzamos hacia el pensamiento multimodal como una alternativa para abordar procesos complejos de decisión.