Effect of oxygen pressure on the grain and domain structure of polycrystalline 0.85PbMg(1/3)Nb(2/3)O(3)-0.15PbTiO(3) thin films studied by scanning probe microscopy

0.85PbMg(1/3)Nb(2/3)O(3)-0.15PbTiO(3) ferroelectric-relaxor thin films have been deposited on La(0.5)nSr(0.5)CoO(3)/(1 1 1) Pt/TiO(2)/SiO(2)/Si by pulsed laser ablation at various oxygen partial pressures in the range 0.05 to 0.4 Torr. All the films have a rhombohedral perovskite structure. The grain morphology and orientation are drastically affected by the oxygen pressure, studied by x-ray diffraction and scanning electron microscopy. The domain structure investigations by dynamic contact electrostatic force microscopy have revealed that the distribution of polar nanoregions and their dynamics is influenced by the grain morphology, orientation and more importantly, oxygen vacancies. The correlation length extracted from autocorrelation function images has shown that the polarization disorder decreases with oxygen pressure up to 0.3 Torr. The presence of polarized domains and their electric field induced switching is discussed in terms of internal bias field and domain wall pinning. Film deposited at 0.4 Torr presents a curious case with unique triangular grain morphology and large polarization disorder.

An eight-connected metal organic framework based on Cu(5) clusters: Synthesis, structure, magnetic and catalytic properties

A reaction of copper acetate, 5-nitroisophthalic acid in a water-methanol mixture under solvothermal condition results in a new metal-organic framework compound, [Cu(5)(mu(3)-OH)(2)(H(2)O)(6){(NO(2))-C(6)H(3)-(COO)(2)}(4)]center dot 5H(2)O, (1). The compound contains Cu5 pentameric cluster units connected by 5-nitro isophthalate (NIPA) moieties forming a CdCl(2)-like layer, which are further connected by another NIPA moiety forming the three-dimensional structure. The water molecules in (1) can be reversibly adsorbed. The removal of water accompanies a change in the colour as well as a structural re-organization. Magnetic studies suggest strong antiferromagnetie correlations between the Cu5 cluster units. The compound (1) exhibits heterogeneous Lewis acid catalysis for the cyanosilylation of imines with more than 95 % selectivity. Compound (1) has been characterized by IR, UV-vis, TGA, powder XRD studies.

Fretting wear behaviour of hydroxyapatite-titanium composites in simulated body fluid, supplemented with 5 g l(-1) bovine serum albumin

Damaged articulating joints can be repaired or replaced with synthetic biomaterials, which can release wear debris due to articulation, leading to the osteolysis. In a recent work, it has been shown that it is possible to achieve a better combination of flexural strength/fracture toughness as well as in vitro bioactivity and cytocompatibility properties in spark plasma sintered hydroxyapatite-titanium (HA-Ti) composites. Although hydroxyapatite and titanium are well documented for their good biocompatibility, nanosized hydroxyapatite (HA) and titanium (Ti) particles can cause severe toxicity to cells. In order to address this issue, fretting wear study of HA-Ti composites under dry and wet (1x SBF, supplemented with 5 g l(-1) bovine serum albumin (BSA)) condition was performed to assess the wear resistance as well as wear debris formation, in vitro. The experimental results reveal one order of magnitude lower wear rate for HA-10 wt% Ti (7.5 x 10(-5) mm(3) N-1 m(-1)) composite than monolithic HA (3.9 x 10(-4) mm(3) N-1 m(-1)) in simulated body fluid. The difference in the tribological properties has been analyzed in the light of phase assemblages and mechanical properties. Overall, the results suggest the potential use of HA-Ti composites over existing HA-based biocomposites in orthopedic as well as dental applications.

Part I. Efforts directed towards the total synthesis of shionone. Part II. Conversion of estrone to androst-4-EN-3-ONE: a new method for activating the C-9 and C-10 positions of estrogenic steroids for substitution

Part I: An approach to the total synthesis of the triterpene shionone is described, which proceeds through the tetracyclic ketone i. The shionone side chain has been attached to this key intermediate in 5 steps, affording the olefin 2 in 29% yield. A method for the stereo-specific introduction of the angular methyl group at C-5 of shionone has been developed on a model system. The attempted utilization of this method to convert olefin 2 into shionone is described.

Part II: A method has been developed for activating the C-9 and C-10 positions of estrogenic steroids for substitution. Estrone has been converted to 4β,5β-epoxy-10β-hydroxyestr-3-one; cleavage of this epoxyketone using an Eschenmoser procedure, and subsequent modification of the product afforded 4-seco-9-estren-3,5-dione 3-ethylene acetal. This versatile intermediate, suitable for substitution at the 9 and/or 10 position, was converted to androst-4-ene-3-one by known procedures.

Measurement of the galactic cosmic ray antiproton flux from 0.25 gev to 3.11 gev with the isotope matter antimatter experiment (imax)

The intensities and relative abundances of galactic cosmic ray protons and antiprotons have been measured with the Isotope Matter Antimatter Experiment (IMAX), a balloon-borne magnet spectrometer. The IMAX payload had a successful flight from Lynn Lake, Manitoba, Canada on July 16, 1992. Particles detected by IMAX were identified by mass and charge via the Cherenkov-Rigidity and TOP-Rigidity techniques, with measured rms mass resolution ≤0.2 amu for Z=1 particles.

Cosmic ray antiprotons are of interest because they can be produced by the interactions of high energy protons and heavier nuclei with the interstellar medium as well as by more exotic sources. Previous cosmic ray antiproton experiments have reported an excess of antiprotons over that expected solely from cosmic ray interactions.

Analysis of the flight data has yielded 124405 protons and 3 antiprotons in the energy range 0.19-0.97 GeV at the instrument, 140617 protons and 8 antiprotons in the energy range 0.97-2.58 GeV, and 22524 protons and 5 antiprotons in the energy range 2.58-3.08 GeV. These measurements are a statistical improvement over previous antiproton measurements, and they demonstrate improved separation of antiprotons from the more abundant fluxes of protons, electrons, and other cosmic ray species.

When these results are corrected for instrumental and atmospheric background and losses, the ratios at the top of the atmosphere are p/p=3.21(+3.49, -1.97)x10^(-5) in the energy range 0.25-1.00 GeV, p/p=5.38(+3.48, -2.45) x10^(-5) in the energy range 1.00-2.61 GeV, and p/p=2.05(+1.79, -1.15) x10^(-4) in the energy range 2.61-3.11 GeV. The corresponding antiproton intensities, also corrected to the top of the atmosphere, are 2.3(+2.5, -1.4) x10^(-2) (m^2 s sr GeV)^(-1), 2.1(+1.4, -1.0) x10^(-2) (m^2 s sr GeV)^(-1), and 4.3(+3.7, -2.4) x10^(-2) (m^2 s sr GeV)^(-1) for the same energy ranges.

The IMAX antiproton fluxes and antiproton/proton ratios are compared with recent Standard Leaky Box Model (SLBM) calculations of the cosmic ray antiproton abundance. According to this model, cosmic ray antiprotons are secondary cosmic rays arising solely from the interaction of high energy cosmic rays with the interstellar medium. The effects of solar modulation of protons and antiprotons are also calculated, showing that the antiproton/proton ratio can vary by as much as an order of magnitude over the solar cycle. When solar modulation is taken into account, the IMAX antiproton measurements are found to be consistent with the most recent calculations of the SLBM. No evidence is found in the IMAX data for excess antiprotons arising from the decay of galactic dark matter, which had been suggested as an interpretation of earlier measurements. Furthermore, the consistency of the current results with the SLBM calculations suggests that the mean antiproton lifetime is at least as large as the cosmic ray storage time in the galaxy (~10^7 yr, based on measurements of cosmic ray ^(10)Be). Recent measurements by two other experiments are consistent with this interpretation of the IMAX antiproton results.

Synthesis, applications and reactivity of 1,2,3-triazolium salts

276 p.

掺Yb^3＋晶体宽带可调谐激光输出特性(英文)

三块掺杂率均为5％的Yb^3＋激光晶体Yb：LSO、Yb：GSO和Yb：GYSO在完全相同的实验条件下由同一块熔融石英棱镜实现了可调谐激光的输出，调谐范围分别为70nm、66nm和74nm．在输出镜透过率为6％时，LSO晶体的光-光转换效率为38．3％；GSO晶体在三者中容易获得更长波长的高功率输出；GYSO晶体由于具有较为平滑的调谐曲线而更容易获得锁模激光．

乳腺增生病p53基因第5外显子突变及其蛋白表达

目的 :探讨 p5 3基因在乳腺癌发生早期的作用。 方法 :用免疫组化方法检测 36例乳腺单纯性增生、31例不典型增生、14例原位癌和 16例浸润癌中 p5 3蛋白的表达 ,用PCR SSCP检测了上述组织中 p5 3基因第 5外显子突变。 结果 :p5 3蛋白在单纯性增生、不典型增生、导管内癌、浸润癌中的表达率分别为 0、2 2 6 % (7/ 31)、42 8% (6 / 14)、5 0 % (8/ 16 ) ,PCR SSCP在各组中均未检测到该基因第 5外显子突变。结论 :乳腺癌发生早期阶段有 p5 3基因的参与 ,但与第 5外显子突变无明显关系

3种念珠藻多糖对自由基的清除作用

研究了地木耳(Nostoc commune)、葛仙米(N.sphaeroides)和发菜(N.flagelliform e)3种念珠藻多糖对自由基的清除作用。结果表明,3种念珠藻多糖对超氧阴离子自由基和羟自由基具有很强的清除作用,且呈量效关系,地木耳清除超氧自由基作用最强,最高清除率达72.3%,葛仙米和发菜分别为46.7%、35.5%;发菜清除羟自由基效果最强,最高清除率达74.3%,葛仙米和地木耳清除率分别为49.0%、46.7%;3种念珠藻多糖对DPPH自由基的清除作用不显著。

豌豆核酮糖1,5-二磷酸羧化酶/加氧酶亚基结合蛋白的纯化及特性

用~(35)S-Met在照光下与豌豆完整叶绿体保温,显示新合成的标记的RubisCO大亚基与结合蛋白形成一复合物,经ATP处理后解离为结合蛋白亚基,同时释放出的标记的RubisCO大亚基参与了RubisCO的装配。豌豆叶片提取液经热处理,硫酸铵分部,DEAE-Sepharose fast flow和Sephacryl S-300柱层析在ND-PAGE,SDS-PAGE上显示为一条带,估计纯度达90％以上,得率比以前报道的高12倍。纯化的结合蛋白表面巯基数经测定为12±1个,总巯基数为36±1个。远紫外CD

Influence of exotic Mn on magnetic properties of YCo5.0-xMnxGa7.0 (0.05 <= x <= 3.0)

The YCo5.0-xMnxGa7.0 compounds crystallize with the ScFe6Ga6-type structure. The lattice of YCo5.0-xMnxGa7.0 expands with the increase of the Mn content for 0.05 <= x <= 2.5, but the lattice of YCo2.0Mn3.0Ga7.0 shrinks compared with YCo2.5Mn2.5Ga7.0. The shrinkage of the lattice is attributed to the magnetostriction of YCo2.0Mn3.0Ga7.0. The substitution of Mn for Co forms magnetic clusters in the antiferromagnetic matrix. The magnetic frustration results in the spin-glass-like behavior for 0.8 <= x <= 1.5 and the difference between zero-field-cooling (ZFC) and field-cooling (FC) magnetizations for x = 2.0, 2.5, and 3.0. A stable long-range magnetic ordering appears among the Mn-centered magnetic clusters with the ordering temperature 110 K for x = 2.0. The hump in the thermomagnetization of YCo3.0Mn2.0Ga7.0 can be attributed to the competitive effects between the thermal fluctuation and the enhanced magnetic interaction. Both the hump and the bifurcation between the ZFC and the FC magnetizations of YCo3.0Mn2.0Ga7.0 occur at lower temperatures as the applied field increases. On the two-step magnetization curve of YCo3.0Mn2.0Ga7.0, the inflection point at 4000 Oe is due to the coercive field, and the magnetic moments in the clusters are tilted to the applied field above 4000 Oe. The magnetic ordering temperature is further increased to 210 K for x = 2.5 and to 282 K for x = 3.0. The spontaneous magnetization of YCo2.0Mn3.0Ga7.0 is 0.575 mu B/f.u. at 5 K with a canted magnetic structure.

聚丙烯酸钠对3种土壤持水能力及作物产量的影响

在离心机模拟不同水吸力条件下,研究了聚丙烯酸钠(sodium polyacrylate记作SP)5种使用浓度(占干土质量0,0.01%,0.08%,0.2%与1%)对3种土壤(砂土、壤土、黏土)持水能力的影响;采用大田试验研究了地表撒施2 g/m2SP对冬小麦与下季玉米产量及WUE影响。结果表明:3种土壤在0.01 MPa至1.5 MPa水吸力下的持水能力随着SP用量的增加而增加,砂土的作用效果较壤土、黏土更显著;3种土壤适宜浓度为0.08%~0.2%,最佳用量为0.2%,此用量条件下砂土、壤土、黏土的最大毛管持水量分别较对照增加了138.61%,7.22%,62.70%;不灌水条件下,SP处理较不施用SP冬小麦增产4%,WUE增加5.7%,灌浆期灌水28.5 mm条件下SP处理较不施用SP增产1%,WUE降低1%;SP处理的玉米产量较对照降低0.5%,WUE提高3%,效果明显低于对冬小麦效果。

稀土发光材料M_2O_3:RE~(3+)（M＝Y，Gd:RE＝Eu，Tb）体系的AAO模板组装

AAO模板具有高度有序的纳米孔阵列，其孔径可以在5一200nm范围内调节，利用AAO模板进行纳米组装已成为纳米结构材料组装的重要技术之一。目前，采用该技术已经制备出了金属、半导体、碳、导电高分子以及其它材料构成的纳米管、纳米线、纳米纤维、电缆等纳米结构单元和有序纳米阵列材料，同时，研究了它们的光、电、磁和催化等特性及其在光学材料、铿电池的电极材料、垂直磁性记录材料和光催化剂等方面的潜在应用。然而，有关稀土发光材料的AAO模板合成及其性质还鲜见报道。本论文采用二次阳极氧化技术制备出了具有高度有序纳米阵列孔的AAO模板。采用溶胶一凝胶法和水热法对稀土发光材料M2O3:RE3+（M＝Y,Gd; RE＝Eu，Tb）体系进行了AAO组装，得到了纳米线、纳米管及其纳米线阵列。对AAO模板和组装样品的形貌、结构和光谱性质进行了表征，得到了一些令人感兴趣的研究结果，其主要的结果和结论总结如下：（1）采用二次阳极氧化法制备出了孔径约为5Onm、35nm和2Onm等系列高度有序纳米阵列孔的基体铝支持的AAO模板和独立支撑的AAO模板。（2）XRD测试结果表明：退火后的基体铝片，其331晶面优先结晶生长，这有利于高度有序纳米阵列孔AAO模板的制备。使用这些退火后的铝片，通过二次阳极氧化法制备的高度有序纳米阵列孔AAO膜为非晶态，并且在退火后转变为γ-Al2O3。（3）未退火的基体铝支持的AAO模板，在350一600nm范围内发出较强的蓝光，其峰值波长位于435nm。该蓝光发射带经过程序控温慢慢退火后完全消失，这说明它产生于缺陷发光中心。（4）采用溶胶一凝胶法，利用AAO模板首次合成出了（YO.96RE0.05）O3（RE＝Eu，Tb）纳米线及其阵列，并通过SEM、EDX、TEM、SAED、XRD和PL分析测试加以确认。x-射线衍射（XRD）和选区电子衍射（SAED）的结果证明，这些纳米线主要是由立方相的RE2O3（RE＝Y或Gd）多晶材料组成的。光谱测试结果表明，同体相材料相比，Eu3＋的，D0一7F2跃迁发射峰和Tb3＋的5D4一7FJ（J=6，5，4，3）跃迁发射峰出现了宽化，这种现象可能是纳米颗粒的表面界面效应所引起的非均匀宽化造成的。（5）首次观察到利用溶胶一凝胶法组装的一部分M2O3:RE3＋（M＝Y，Gd；RE＝Eu，Tb）样品，沿着AAO模板阵列孔壁的边沿所形成的网状结构，并初步地探讨了其形成的机理。（6）对于M2O3:RE3＋（M=Y，Gd；RE＝Eu，Tb）体系，仅仅依靠毛细作用是难以充分地将溶胶前驱液组装进从O模板的阵列孔中。（7）首次利用水热合成法，在中性条件介质下，将（Y，Gd）2O3:Eu3+样品充分地组装进了AAO模板的纳米孔道中，这说明水热产生的高压可以作为AAO模板组 装样品的驱动力。（8）以M2O3: RE3+（M＝Y，Gd；RE＝Eu，Tb）溶胶或氢氧化物沉淀作为前驱物，分别在酸性和碱性条件下，进行了从0模板水热合成组装。实验结果表明，AAO模板被部分地损坏。但在碱性条件下的高压釜中，却得到了单晶纳米管、纳米片和纳米棒。

用光化学方法氧化Tb~(3+)、Pr~(3+)、Ce~(3+)离子

本文内容包括Tb~(3+)、Pr~(3+)、Ce~(3+)的光氧化。研究了各种因素对氧化率或四价离子生成量的影响。在Tb~(3+)光氧化的基础上，建立了混合钇族稀土中Tb的光化学分析法及混合稀土中Tb的化学氧化分析方法。Tb~(3+)、Pr~(3+)的光氧化是开创性的工作，Tb的分析方法具有一定的应用价值。1 Ce~(3+)d HZO_3－HClO_4体系中的光氧化 用低压汞灯（254nm)、高压汞灯(366nm)和氩离子激光器(351/364nm, 458 nm, 477nm, 502 nm, 514, nm)光辐照Ce~(3+)-HZO_3-HClO_4溶液，Ce~(3+)发生光氧化反应，生成Ce(ZO_3)_4沉淀 。在低压汞灯254 nm波段可获得较高的氧化率，具它波段下的氧化率低，以低压汞灯为光源辐照。研究了温度、光强、酸度、Ce~(3+)初始浓度及辐照时间对氧化率的影响。降低酸度，选择较高的温度和较大的光强，有利于Ce~(3+)的光氧化。2 Tb~(3+)在KIO_4-KOH体系中的光氧化 用高压汞灯（366nm)光辐照Tb~(3+)-KIO_4-KOH溶液，首次实现了Tb~(3+)的光氧化。研究了碱度、络合剂浓度，Tb~(3+)初始浓度、辐照面积，光强和辐照时间等因素对Tb~(4+)生成的影响。测定了Tb(IV)/Rb(III)的氧化还原电势。适宜的KOH浓度应大于0.3M，KIO_4的浓度要比Tb~(3+)初始浓度大几个数量级。当KOH=0.6M, KIO_4=0.22M, 温度为13 ℃时。E_(Tb(IV)/Tb(III))=0.68优，生成的Tb~(4+)可溶性络离子为红棕色，最大吸收峰在420nm附近，比较稳定。3 用光氧化法分析钇族混合稀土中的Tb 根据Tb~(3+)在KIO_4-KOH体系中的光氧化反应，建立了钇族混合稀土中Tb的分光光度分析方法。在高压汞灯366nm的光辐照不无色的Tb~(3+)转变为红棕色的Tb~(4+)，其谱带的吸收峰值在420nm，其它三价钇族稀土无此反应，故无千扰，在Tb的分析浓度范围为1*10~(-5)M - 1*10~(-3)M时，符合Beer定律，Tb在钇族混合稀土中含量的分析最低限为0.2%。此方法可用于萃取钇族稀土过程中Tb的分析，方法简便快速。4 用化学氧化法分析混合稀土中的Tb 根据Tb~(3+)在KIO_4-KOH-K_2S_2O_8体系中的氧化反应，建立了混和稀土中Tb的分光光度分析方法。Tb~(3+)-KzO_4-KOH-K_2S_2O_8溶液加热，Tb~(3+)被氧化的Tb~(4+)，其颜色由无色转变为红棕色，最大吸收峰在420nm。Ce~(3+)加入KIO＿4－KOH溶液后，立即被完全氧化为Ce~(4+), Ce~(4+)在420nm也有吸收，其干扰可以在本底中排除，其它三价稀土离子在此体系中不能发生氧化反应，故无干扰。在Tb的分析浓度范围为5*10~(-5)-5*10~(-4)M时，符合Beer定律，Tb在混合稀土中含量分析的最低限为1％。此方法可用于萃取稀土过程中Tb的分析和监控，方法简便快速。5 Pr~(3+)在KZO_4－KOH体系中的光氧化用高压汞灯光辐照Pr~(3+)-KZO_4-KOH溶液，首次实现了Pr~(3+)的光氧化。生成的Pr~(4+)为棕褐色，最大吸收峰在400nm附近，稳定性较差，在水溶液中发生自还原反应。按Pr~(4+)在400nm的吸收峰值，研究了辐照时间，Pr~(3+)初始浓度，KOH浓度、KZO＿4浓度及Ce~(4+)共存时对Pr~9(4+)生成的影响。相应增加KOH及KZO＿4用量，有利于Pr~(4+)的生成，Ce~(4+)对Pr~(3+)的光氧化无所谓的“带同氧化作用”。

5-氟尿嘧啶-β-环糊精结肠靶向前体药物的研究

5-氟尿嘧啶(5-Fluorouracil， 5-FU)是一种抗代谢药物，广泛用于临床治疗结直肠癌、胃癌、乳腺癌等多种癌症，但其首过代谢显著、亲脂性较低，选择性差、毒副作用大。为克服这些缺点人们对5-FU进行了大量的修饰工作，包括小分子修饰以及与各种载体形成微球、微囊、纳米粒、共价前药等。 环糊精(Cyclodextrin，简称CD)，可被结肠中的糖苷酶特异性地降解成小分子糖，而胃和小肠中由于缺乏相应的酶而使环糊精不被降解，这一特性在结肠药物的靶向输送及释放中有重要应用价值。环糊精中含有丰富的羟基，易进行化学修饰，将药物与环糊精通过共价键结合制成前药，使其在胃和小肠中不降解，而在盲结肠中被特异性的酶降解释出药物，达到结肠靶向释药的目的。研究表明，环糊精作为一种前药载体为结肠靶向释药和缓释、控释系统提供了一种有效的手段。 本工作选择5-氟尿嘧啶为模型药物、β-环糊精作为载体，通过中间体5-FU羧酸衍生物的制备及其与β-环糊精的偶联，合成了系列5-FU-β-CD前体药物，并利用紫外、红外、质谱、核磁、元素分析、热分析等手段对其进行结构表征。同时，还研究了前体药物的体外释药性质。具体内容包括： 1. 含有羧基的5-FU衍生物中间体的合成：(5-氟尿嘧啶-1-基)-乙酸(FUAC)、3-(5-氟尿嘧啶-1-基)-丙酸(FUPC)、5-(5-氟尿嘧啶-1-基)-戊酸(FUVC)的合成。 2. 中间体5-FU的羧酸衍生物与β-CD的偶联：分别通过以6-OTs-β-CD为中间体的取代法和活化酯法，合成了第一面取代和第二面取代的5-FU-β-CD大分子前体药物。在二面取代的前体药物制备中，通过改变原料的比例，合成了系列不同取代度(DS)的2-[(5-氟尿嘧啶-1-基)-乙酰基] -β-环糊精结合物。 3. 对上述前体药物进行体外释放研究：分别考察了前体药物在不同pH缓冲溶液中的水解行为及其在小鼠胃肠道人工体液中的酶解行为，并通过UV-Vis及HPLC对前体药物释放情况进行检测分析。 5-Fluorouracil(5-Fu), commonly known as a broad-spectrum antineoplastic drug, has been widely used in the treatment of various kinds of cancer including colon cancer for 40 years. However, this antitumor agent exhibits serious adverse effects, such as their marrow toxicity, gastrointestinal reaction and low selectivity in their clinical use. In order to improve its antitumor activity and reduce its toxicity, the compound was modified in various ways, including the formation of conjugated prodrugs with kinds of carrier, microsphere and nanoparticles etc. Cyclodextrins(CDs) are known to be barely capable of being hydrolyzed and only slightly absorbed in passing through the stomach and small intestine; however they are fermented into small saccharides by colonic microflora and thus absorbed as small saccharides in the large intestine. This biodegradation property of CDs may be useful as a colon-targeting carrier, and thus CD prodrugs may serve as a source of site-specific delivery of drugs to colon. It was demonstrated that prodrugs of CDs can provide a versatile means for construction of not only colon targeted delivery systems, but also delayed release systems. 5-Fluorouracil was taken as a model drug and β-CD as the carrier in this study. Series prodrugs of 5-FU was prepared through the preparation of reactive 5-FU derivatives containing carboxyl group and coupling to hydroxyl groups of CD. The structures of the conjugates were charactered by using IR, UV–vis, ESI-MS, 1H, 13C-NMR spectra, elemental analyses, and thermal analysis. In vitro hydrolysis behavior in aqueous solution and in rat gastrointestinal tract contents of the conjugates were also investigated. The main content of this dissertation includes following aspects: 1. The preparation of 5-FU derivatives containing carboxyl group: 5-Fluorouracil- acetic acid(FUAC)、3-(5-FU-1)-propionic acid (FUPC)、and 5-(5-FU-1)-valeric acid(FUVC). 2. The coupling of 5-FU derivatives to β-CD: 5-FU was selectively conjugated onto the primary or secondary hydroxyl groups of β-CD through an ester linkage, by the substitution of 6-OTs-β-CD and the activated ester method respectively. For the secondary face conjugation, the degree of substitution(DS) can be controlled by changing the mole ratio of the starting materials(FUAC and β-CD). 3. In vitro release behavior of the conjugates in aqueous solution and in rat gastro- intestinal tract contents of the conjugates were investigated, and the reaction was monitored and analyzed by using UV-Vis and HPLC methods.