Investigation of generation -recombination noise and related processes in aluminum gallium arsenide TEGFETs and Hall structures with quantum wells

Experimental and theoretical studies regarding noise processes in various kinds of AlGaAs/GaAs heterostructures with a quantum well are reported. The measurement processes, involving a Fast Fourier Transform and analog wave analyzer in the frequency range from 10 Hz to 1 MHz, a computerized data storage and processing system, and cryostat in the temperature range from 78 K to 300 K are described in detail. The current noise spectra are obtained with the “three-point method”, using a Quan-Tech and avalanche noise source for calibration. ^ The properties of both GaAs and AlGaAs materials and field effect transistors, based on the two-dimensional electron gas in the interface quantum well, are discussed. Extensive measurements are performed in three types of heterostructures, viz., Hall structures with a large spacer layer, modulation-doped non-gated FETs, and more standard gated FETs; all structures are grown by MBE techniques. ^ The Hall structures show Lorentzian generation-recombination noise spectra with near temperature independent relaxation times. This noise is attributed to g-r processes in the 2D electron gas. For the TEGFET structures, we observe several Lorentzian g-r noise components which have strongly temperature dependent relaxation times. This noise is attributed to trapping processes in the doped AlGaAs layer. The trap level energies are determined from an Arrhenius plot of log (τT2) versus 1/T as well as from the plateau values. The theory to interpret these measurements and to extract the defect level data is reviewed and further developed. Good agreement with the data is found for all reported devices. ^

Soot Measurements in Steady and Pulsed Ethylene/Air Diffusion Flames Using Laser-Induced Incandescence

Combustion-generated carbon black nano particles, or soot, have both positive and negative effects depending on the application. From a positive point of view, it is used as a reinforcing agent in tires, black pigment in inks, and surface coatings. From a negative point of view, it affects performance and durability of many combustion systems, it is a major contributor of global warming, and it is linked to respiratory illness and cancer. Laser-Induced Incandescence (LII) was used in this study to measure soot volume fractions in four steady and twenty-eight pulsed ethylene diffusion flames burning at atmospheric pressure. A laminar coflow diffusion burner combined with a very-high-speed solenoid valve and control circuit provided unsteady flows by forcing the fuel flow with frequencies between 10 Hz and 200 Hz. Periodic flame oscillations were captured by two-dimensional phase-locked LII images and broadband luminosity images for eight phases (0°- 360°) covering each period. A comparison between the steady and pulsed flames and the effect of the pulsation frequency on soot volume fraction in the flame region and the post flame region are presented. The most significant effect of pulsing frequency was observed at 10 Hz. At this frequency, the flame with the lowest mean flow rate had 1.77 times enhancement in peak soot volume fraction and 1.2 times enhancement in total soot volume fraction; whereas the flame with the highest mean flow rate had no significant change in the peak soot volume fraction and 1.4 times reduction in the total soot volume fraction. A correlation (ƒv Reˉ1 = a+b· Str) for the total soot volume fraction in the flame region for the unsteady laminar ethylene flames was obtained for the pulsation frequency between 10 Hz and 200 Hz, and the Reynolds number between 37 and 55. The soot primary particle size in steady and unsteady flames was measured using the Time-Resolved Laser-Induced Incandescence (TIRE-LII) and the double-exponential fit method. At maximum frequency (200 Hz), the soot particles were smaller in size by 15% compared to the steady case in the flame with the highest mean flow rate.

I terremoti storici hanno fatto più danni nella parte nord-occidentale di Bologna: ricerca di una spiegazione geofisica per questo fenomeno

Dallo studio della sismicità storica della città di Bologna (Guidoboni e Boschi, 2003) emerge che la maggior parte dei danni causati dai terremoti è concentrata nella parte Nord e Nord-Ovest della città, a nord delle attuali vie S. Donato e S. Isaia. In questo lavoro abbiamo studiato la risposta sismica in diversi siti del centro storico di Bologna, per capirne il comportamento in caso di terremoto e verificare se i risultati fossero compatibili con i dati storici. È stata effettuata una campagna di misure geofisiche: 52 con tecnica passiva a stazione singola HVSR per misurare le frequenze di amplificazione dei sottosuoli (47 all’interno delle mura), 5 in array per misurare l’andamento delle velocità delle onde di taglio nel sottosuolo (tutte all’interno delle mura). 22 delle 47 misure H/V mostrano amplificazione nell’intervallo di frequenze tra 1 e 10 Hz, quello di interesse per le strutture del centro storico. Le cause di queste amplificazioni si ipotizzano essere un livello ghiaioso a circa 10-15 m di profondità (Fiori, 2002) in approfondimento da centro città verso est, e un livello sabbioso a circa 10 m di profondità (Amorosi, 2014). Le misure in array, invece, indicano sostanzialmente che l’estremità orientale della città storica ha rigidezze maggiori a profondità maggiori di 50 m. Il dato derivante dalla sismologia storica, in sintesi, non pare essere completamente supportato da evidenze geologiche o geofisiche: la risposta sismica all’interno delle mura di Bologna varia leggermente da punto a punto, ma senza mostrare trend applicabili ad estese macroaree. Solo l’estremo Nord-Est della città ha un comportamento amplificativo più omogeneo (amplificazione a 1-3 Hz) in linea con la geologia locale, che presenta livelli marcatamente ghiaiosi sotto i 15 m di profondità. La variabilità geologica e di risposta sismica locale è stata verificata essere molto maggiore fuori dalle mura di cinta della città.

Sub-wavelength resonators as seismic Rayleigh waves shield

We explore the thesis that tall structures can be protected by means of seismic metamaterials. Seismic metamaterials can be built as some elements are created over soil layer with different shapes, dimensions, patterns and from different materials. Resonances in these elements are acting as locally resonant metamaterials for Rayleigh surface waves in the geophysics context. Analytically we proved that if we put infinite chain of SDOF resonator over the soil layer as an elastic, homogeneous and isotropic material, vertical component of Rayleigh wave, longitudinal resonance of oscillators will couple with each other, they would create a Rayleigh bandgap frequency, and wave will experience attenuation before it reaches the structure. As it is impossible to use infinite chain of resonators over soil layer, we considered finite number of resonators throughout our simulations. Analytical work is interpreted using finite element simulations that demonstrates the observed attenuation is due to bandgaps when oscillators are arranged at sub-wavelength scale with respect to the incident Rayleigh wave. For wavelength less than 5 meters, the resulting bandgaps are remarkably large and strongly attenuating when impedance of oscillators matches impedance of soil. Since longitudinal resonance of SDOF resonator are proportional to its length inversely, a formed array of resonators that attenuates Rayleigh waves at frequency ≤10 Hz could be designed starting from vertical pillars coupled to the ground. Optimum number of vertical pillars and their interval spacing called effective area of resonators are investigated. For 10 pillars with effective area of 1 meter and resonance frequency of 4.9 Hz, bandgap frequency causes attenuation and a sinusoidal impulsive force illustrate wave steering down phenomena. Simulation results proved analytical findings of this work.

Evaluating laser-driven Bremsstrahlung radiation sources for imaging and analysis of nuclear waste packages

A small scale sample nuclear waste package, consisting of a 28 mm diameter uranium penny encased in grout, was imaged by absorption contrast radiography using a single pulse exposure from an X-ray source driven by a high-power laser. The Vulcan laser was used to deliver a focused pulse of photons to a tantalum foil, in order to generate a bright burst of highly penetrating X-rays (with energy >500 keV), with a source size of <0.5 mm. BAS-TR and BAS-SR image plates were used for image capture, alongside a newly developed Thalium doped Caesium Iodide scintillator-based detector coupled to CCD chips. The uranium penny was clearly resolved to sub-mm accuracy over a 30 cm2 scan area from a single shot acquisition. In addition, neutron generation was demonstrated in situ with the X-ray beam, with a single shot, thus demonstrating the potential for multi-modal criticality testing of waste materials. This feasibility study successfully demonstrated non-destructive radiography of encapsulated, high density, nuclear material. With recent developments of high-power laser systems, to 10 Hz operation, a laser-driven multi-modal beamline for waste monitoring applications is envisioned.

A comparison of the physiological demands of rugby union match-play when determined by absolute (ABS) or individual (IND) velocity bands in Global Positioning System (GPS) analysis

Since turning professional in 1995 there have been considerable advances in the research on the demands of rugby union, largely using Global Positioning System (GPS) analysis over the last 10 years. A systematic review on the use of GPS, particularly the setting of absolute (ABS) and individual (IND) velocity bands in field based, intermittent, high-intensity (HI) team sports was undertaken. From 3669 records identified, 38 studies were included for qualitative analysis. Little agreement on the definition of movement intensities within team sports was found, only three papers, all on rugby union, had used IND bands, with only one comparing ABS and IND methods. Thus, the aim of this study was to determine if there is a difference in the demands within positions when comparing ABS and IND methods for GPS analysis and if these differences are significantly different between the forward and back positional groups. A total of 214 data files were recorded from 26 players in 17 matches of the 2015/2016 Scottish BT Premiership. ABS velocity zones 1-7 were set at 1) 0-6, 2) 6.1-11, 3) 11.1-15, 4) 15.1-18, 5) 18.1-21, 6) 21.1-15 and 7) 25.1-40km.h-1 while IND zones 1-7 were 1) <20, 2) 20-40, 3) 40-50, 4) 50-70, 5) 70-80, 6) 80-95 and 7) 95-100% of player’s individually determined maximum velocity (Vmax). A 40m sprint test measured Vmax using OptaPro S4 10 Hz (catapult, Australia) GPS units to derive IND bands. The same GPS units were worn during matches. GPS outputs analysed were % distance, % time, high intensity efforts (HIEs) over 18.1 km.h-1 / 70% max velocity and repeated high intensity efforts (RHIEs) which consists of three HIEs in 21secs. General linear model (GLM) analysis identified a significant difference in the measurement of % total distance covered, between the ABS and IND methods in all zones for forwards (p<0.05) and backs (p<0.05). This difference was also significant between forwards and backs in zones 1, shown as mean difference ± standard deviation (3.7±0.7%), 6 (1.2±0.4%) and 7 (1.0±0.0%) respectively (p<0.05). Percentage time estimations were significantly different between ABS and IND analysis within forwards in zones 1 (1.7±1.7%), 2 (-2.9±1.3%), 3 (1.9±0.8%), 4 (-1.4±0.8%) and 5 (0.2±0.4%), and within backs in zones 1 (-10±1.5%), 2 (-1.2±1.1%), 3 (1.8±0.9%) and 5 (0.6±0.5%) (p<0.05). The difference between groups was significant in zones 1, 2, 4 and 5 (p<0.05). The number of HIEs was significantly different between forwards and backs in zones 6 (6±2) and 7 (3±2). RHIEs were significantly different between ABS and IND for forwards (1±2, p<0.05) although not between groups. Until more research on the differences in ABS and IND methods is carried out, then neither can be deemed a criterion method. In conclusion, there are significant differences between the ABS and IND methods of GPS analysis of the physical demands of rugby union, which must be considered when used to inform training load and recovery to improve performance and reduce injuries.

A monitorização da carga de treino através da análise tempo-movimento e da perceção subjetiva do esforço, PSE, no futebol

O objetivo do presente estudo foi verificar se existe variação dos parâmetros que caraterizam a atividade motora de jogadores de futebol em treino, obtidos através do Viper Software STATSports, ao longo de vários microciclos (MCs) integrando o período preparatório (PP) e o início do período competitivo (PC), assim como, averiguar a associação existente entre a variação destes parâmetros, MC a MC, e a Perceção Subjetiva do Esforço Sessão (PSE-sessão) respetiva, e verificar, ainda, se existe correlação entre estes parâmetros e a PSE, em cada MC do período considerado. A amostra do estudo foi constituída por 13 jogadores (idade: 25 ± 1,78 anos) de futebol do sexo masculino a competir no escalão de Séniores da Associação Futebol de Setúbal. A recolha de dados ocorreu durante o PP (4 semanas) e o PC (4 semanas). Os jogadores incluídos no estudo cumpriram o único critério definido: a realização total das sessões de treino previstas. Os instrumentos utilizados durante o processo foram o sistema Viper (Viper Software v.1.2, STATSports), integrando um GPS 10 Hz, acelerómetro 100 Hz, cardiofrequencímetro e a escala de PSE adaptada por Foster. Verificou-se elevada variabilidade no comportamento dos parâmetros no PP, mas não nos 3 últimos MCs já integrados no PC. Verificamos forte associação entre os parâmetros Distância Explosiva (r=0,762), Nº Esforços de Elevada Carga Metabólica (r=0,714), Nº Acelerações (r=0,714), Nº Desacelerações (r=0,762) e a PSE-sessão (p˂0,05). O parâmetro com maior potencial preditor de elevados valores da PSE-sessão é a Distância Explosiva (p˂0,001). Por fim, não encontramos uma associação regular entre os parâmetros e a PSE-sessão em cada MC. Os valores de PSE-sessão apresentados durante o estudo são semelhantes a valores apresentados em outros estudos no futebol profissional. Conclui-se que no PP ocorreu a variabilidade de todos os parâmetros e estabilização no PC da Distância Total, Distância de Elevada Carga Metabólica, Distâcia Explosiva, Nº Esforços de Elevada Carga Metabólica e PSE-sessão. A PSE-sessão depende dos parâmetros Distância Explosiva, Nº Esforços de Elevada Carga Metabólica, Nº Acelerações e Nº Desacelerações, i.e., as ações de elevada exigência metabólica e neuromuscular explicam a relação existente entre os parâmetros de carga e a PSE-sessão como indicador global de carga interna. A utilização do sistema Viper possibilita a recolha de parâmetros que descrevem as exigências fisícas a que os jogadores estão sujeitos e fornece informação fundamental para o planeamento do treino em conjunto com a recolha sistemática da PSE-sessão.

L’analyse biomécanique du sprint sur ergomètre non-motorisé : interaction entre les asymétries cinétiques et cinématiques lors d’un sprint de 40 verges

Au sprint 100 mètres et dans de nombreux sport de puissance, la phase d’accélération est un déterminant majeure de la performance. Toutefois, les asymétries cinétiques et cinématiques peuvent avoir une incidence sur la performance. L’objectif de cette étude était d’identifier la présence d’interaction entre différentes variables cinétiques et cinématiques angulaires aux membres inférieures (MI) d’un sprint de haute intensité sur un ergomètre non-motorisé avec résistance (NMR). Suite à une rencontre de familiarisation, 11 sujets ont exécuté des sprints de 40 verges. Les données cinétiques ont été obtenues par l’entremise de plateformes de force intégrées aux appuis de l’ergomètre NMR à 10 Hz et les données cinématiques ont été amassées à l’aide du système Optitrack et du logiciel Motive Tracker à 120Hz. Nous avons effectué un test de corrélation linéaire (Corrélation linéaire de Pearson) pour déterminer la relation entre les données cinétiques et cinématiques (p < 0,05). L’analyse des données a révélée (1) une corrélation positive entre la moyenne d’amplitude articulaire à la cheville et la moyenne des pics de puissance développés (W/kg) lors de la phase de maintien (r = 0,62), (2) une corrélation négative entre l’extension maximale moyenne (calculé à partir de l’angle de flexion le plus petit) à la hanche et la moyenne de pics de puissance développées en fin de poussée lors de la totalité et de la phase de maintien (r = -0,63 et r = -0,69 respectivement), et finalement (3) une corrélation négative entre la différence de dorsiflexion maximale à la cheville et la différence des pics de puissance développés aux MI lors du contact du pied au sol en phase de maintien ( r = -0,62). Les résultats obtenus dans cette étude permettront d’améliorer l’intervention des préparateurs physiques et la pratique des athlètes de sport de puissance en plus d’aider au développant de nouvelles technologies et outils d’entrainement complémentaire au sprint et particulièrement à la phase d’accélération.

L’analyse biomécanique du sprint sur ergomètre non-motorisé : interaction entre les asymétries cinétiques et cinématiques lors d’un sprint de 40 verges

Au sprint 100 mètres et dans de nombreux sport de puissance, la phase d’accélération est un déterminant majeure de la performance. Toutefois, les asymétries cinétiques et cinématiques peuvent avoir une incidence sur la performance. L’objectif de cette étude était d’identifier la présence d’interaction entre différentes variables cinétiques et cinématiques angulaires aux membres inférieures (MI) d’un sprint de haute intensité sur un ergomètre non-motorisé avec résistance (NMR). Suite à une rencontre de familiarisation, 11 sujets ont exécuté des sprints de 40 verges. Les données cinétiques ont été obtenues par l’entremise de plateformes de force intégrées aux appuis de l’ergomètre NMR à 10 Hz et les données cinématiques ont été amassées à l’aide du système Optitrack et du logiciel Motive Tracker à 120Hz. Nous avons effectué un test de corrélation linéaire (Corrélation linéaire de Pearson) pour déterminer la relation entre les données cinétiques et cinématiques (p < 0,05). L’analyse des données a révélée (1) une corrélation positive entre la moyenne d’amplitude articulaire à la cheville et la moyenne des pics de puissance développés (W/kg) lors de la phase de maintien (r = 0,62), (2) une corrélation négative entre l’extension maximale moyenne (calculé à partir de l’angle de flexion le plus petit) à la hanche et la moyenne de pics de puissance développées en fin de poussée lors de la totalité et de la phase de maintien (r = -0,63 et r = -0,69 respectivement), et finalement (3) une corrélation négative entre la différence de dorsiflexion maximale à la cheville et la différence des pics de puissance développés aux MI lors du contact du pied au sol en phase de maintien ( r = -0,62). Les résultats obtenus dans cette étude permettront d’améliorer l’intervention des préparateurs physiques et la pratique des athlètes de sport de puissance en plus d’aider au développant de nouvelles technologies et outils d’entrainement complémentaire au sprint et particulièrement à la phase d’accélération.

Transport Barkhausen-like noise in uniaxially pressed Bi(1.65)Pb(0.35)Sr(2)Ca(2)Cu(3)O(10+delta) ceramic samples

We report on the detection of the transport Barkhausen-like noise (TBN) in polycrystalline samples of Bi(1.65)Pb(0.35)Sr(2)Ca(2) Cu(3)O(10+delta) (Bi-2223) which were subjected to different uniaxial compacting pressures. The transport Barkhausen-like noise was measured when the sample was subjected to an ac triangular-shape magnetic field (f similar to 1 Hz) with maximum amplitude B(max) approximate to 5.5 mT, in order to avoid the flux penetration within the superconducting grains. Analysis of the TBN signal, measured for several values of excitation current density, indicated that the applied magnetic field in which the noise signal first appears, B(a)(t(i)), is closely related to the magnetic-flux pinning capability of the material. The combined results are consistent with the existence of three different superconducting levels within the samples: (i) the superconducting grains; (ii) the superconducting clusters; and (iii) the weak-links. We finally argue that TBN measurements constitute a powerful tool for probing features of the intergranular transport properties in polycrystalline samples of high-T(c) superconductors. (C) 2010 Elsevier B.V. All rights reserved.

Inhibition of motor cortex excitability with 15 Hz transcranial alternating current stimulation (tACS)

There remains a lack of solid evidence showing whether transcranial stimulation with weak alternating current (transcranial alternating current stimulation, tACS) can in fact induce significant neurophysiological effects. Previously, a study in which tACS was applied for 2 and 5 min with current density = 0.16-0.25 A/m(2) was unable to show robust effects on cortical excitability. Here we applied tACS at a significantly higher current density (0.80 A/m(2)) for a considerably longer duration (20 min) and were indeed able to demonstrate measurable changes to cortical excitability. Our results show that active 15 Hz tACS of the motor cortex (electrodes placed at C3 and C4) significantly diminished the amplitude of motor evoked potentials and decreased intracortical facilitation (ICF) as compared to baseline and sham stimulation. In addition, we show that our method of sham tACS is a reliable control condition. These results support the notion that AC stimulation with weak currents can induce significant changes in brain excitability; in this case, 15 Hz tACS led to a pattern of inhibition of cortical excitability. We propose that tACS may have a dampening effect on cortical networks and perhaps interfere with the temporal and spatial summation of weak subthreshold electric potentials. (C) 2010 Elsevier Ireland Ltd. All rights reserved.

CO(2) Laser (10.6 mu m) Parameters for Caries Prevention in Dental Enamel

Although CO(2) laser irradiation can decrease enamel demineralisation, it has still not been clarified which laser wavelength and which irradiation conditions represent the optimum parameters for application as preventive treatment. The aim of the present explorative study was to find low-fluence CO(2) laser (lambda = 10.6 mu m) parameters resulting in a maximum caries-preventive effect with the least thermal damage. Different laser parameters were systematically evaluated in 3 steps. In the first experiment, 5 fluences of 0.1, 0.3, 0.4, 0.5 and 0.6 J/cm(2), combined with high repetition rates and 10 mu s pulse duration, were chosen for the experiments. In a second experiment, the influence of different pulse durations (5, 10, 20, 30 and 50 mu s) on the demineralisation of dental enamel was assessed. Finally, 3 different irradiation times (2, 5 and 9 s) were tested in a third experiment. In total, 276 bovine enamel blocks were used for the experiments. An 8-day pH-cycling regime was performed after the laser treatment. Demineralisation was assessed by lesion depth measurements with a polarised light microscope, and morphological changes were assessed with a scanning electron microscope. Irradiation with 0.3 J/cm(2), 5 mu s, 226 Hz for 9 s (2,036 overlapping pulses) increased caries resistance by up to 81% compared to the control and was even significantly better than fluoride application (25%, p < 0.0001). Scanning electron microscopy examination did not reveal any obvious damage caused by the laser irradiation. Copyright (C) 2009 S. Karger AG, Basel

Controlled study of 50-Hz repetitive transcranial magnetic stimulation for the treatment of Parkinson disease.

OBJECTIVE: To investigate the safety and efficacy of 50-Hz repetitive transcranial magnetic stimulation (rTMS) in the treatment of motor symptoms in Parkinson disease (PD). BACKGROUND: Progression of PD is characterized by the emergence of motor deficits that gradually respond less to dopaminergic therapy. rTMS has shown promising results in improving gait, a major cause of disability, and may provide a therapeutic alternative. Prior controlled studies suggest that an increase in stimulation frequency might enhance therapeutic efficacy. METHODS: In this randomized, double blind, sham-controlled study, the authors investigated the safety and efficacy of 50-Hz rTMS of the motor cortices in 8 sessions over 2 weeks. Assessment of safety and clinical efficacy over a 1-month period included timed tests of gait and bradykinesia, Unified Parkinson's Disease Rating Scale (UPDRS), and additional clinical, neurophysiological, and neuropsychological parameters. In addition, the safety of 50-Hz rTMS was tested with electromyography-electroencephalogram (EMG-EEG) monitoring during and after stimulation. RESULTS: The authors investigated 26 patients with mild to moderate PD: 13 received 50-Hz rTMS and 13 sham stimulation. The 50-Hz rTMS did not improve gait, bradykinesia, and global and motor UPDRS, but there appeared a short-lived "on"-state improvement in activities of daily living (UPDRS II). The 50-Hz rTMS lengthened the cortical silent period, but other neurophysiological and neuropsychological measures remained unchanged. EMG/EEG recorded no pathological increase of cortical excitability or epileptic activity. There were no adverse effects. CONCLUSION: It appears that 50-Hz rTMS of the motor cortices is safe, but it fails to improve motor performance and functional status in PD. Prolonged stimulation or other techniques with rTMS might be more efficacious but need to be established in future research.

Valores dos parâmetros da dopplerfluxometria do ducto venoso entre a 10ª e a 14ª semana de gestações normais

OBJETIVO: analisar os valores dos parâmetros dopplerfluxométricos do ducto venoso, entre a 10ª e a 14ª semana de gestação, durante as diferentes fases do ciclo cardíaco: sístole ventricular (onda S), diástole ventricular (onda D), contração atrial (onda a) e dos índices ângulo-independentes. MÉTODOS: foi desenvolvido estudo prospectivo e transversal que examinou 276 gestações únicas. Foram excluídas as gestações múltiplas, malformações fetais, fetos com translucência nucal aumentada e gestantes com doenças associadas. O equipamento utilizado foi Toshiba, modelo SSH-140 A. A análise espectral foi obtida de acordo com os procedimentos padronizados: ângulo de insonação menor que 30° e uso de filtro de 50-70 Hz. O ducto venoso foi identificado em corte sagital e ventral do abdome superior fetal com o Doppler colorido. A amostra de volume (1-2 mm³) foi adquirida imediatamente na origem do ducto venoso. Pelo menos três ondas nítidas e consecutivas foram necessárias para aferição dos parâmetros. Para o estudo estatístico foi realizado o teste de Levene e o método de Bonferroni. RESULTADOS: foi observado aumento na velocidade S de 29 cm/s para 37 cm/s (p=0,013) entre a 10ª e a 14ª semana de gestação. Similarmente, houve aumento na velocidade D (de 25 cm/s para 32 cm/s, p=0,026). A onda a, o índice de pulsatilidade e a relação S/a apresentaram valores constantes no período estudado. CONCLUSÃO: os valores estabelecidos por este estudo podem servir para acompanhamento dopplerfluxométrico de gestações normais. Futuros estudos são necessários para determinar a validade destes parâmetros na população normal e, em particular, para fetos de risco.

Dielectric Dispersion of Water in the Frequency Range from 10 mHz to 30 MHz

We investigate the dielectric dispersion of water, specially in the low-frequency range, by using the impedance spectroscopy technique. The frequency dependencies of the real R and imaginary Z parts of the impedance Could not be explained by means of the Usual description of the dielectric properties of the water as all insulating liquid containing ions. This is due to the incomplete knowledge of the parameters entering in the fundamental equations describing the evolution of the system, and oil the mechanisms regulating the exchange of charge of the cell with the external circuit. We propose a simple description of our experimental data based on the model of Debye, by invoking a dc conductivity of the cell, related to the nonblocking character of the electrodes. A discussion on the electric Circuits able to simulate the cell under investigation, based oil bulk and Surface elements, is also reported. We find that the simple circuit formed by a series of two parallels of resistance and capacitance is able to reproduce the experimental data concerning the real and imaginary part of the electrical impedance of the cell for frequency larger than 1 Hz. According to this description, one of the parallels takes into account the electrical properties of interface between the electrode and water, and the other of the bulk. For frequency lower than 1 Hz, a good agreement with the experimental data is obtained by simulating the electrical properties of the interface by means of the constant phase element.