Substrate Preparation Behaviors for the Cultivation of the Symbiotic Fungus in Leaf-Cutting Ants of the Genus Atta (Hymenoptera: Formicidae)

Our findings revealed two distinct patterns of substrate preparation: the pattern of leaf-cutting ants foraging on dicotyledons is marked by highly fragmented substrate resulting in a more advanced initial decomposition. The pattern of leaf-cutting ants harvesting grasses is characterized by large pieces of substrate, resulting in little initial decomposition. Ants foraging on both types of plants are apparently intermediary between the two patterns, although more similar to the patterns of those foraging on dicotyledons. Also, the behavior of scraping the substrate was described for the first time, it is very important for the removal of the epicuticular wax layer of the leaves helping the growth of the symbiotic fungus.

Aspectos morfológicos e influência do tamanho da semente na germinação do jambo-vermelho

O jambo-vermelho (Syzygium malaccense (L.) Merryl et Perry), espécie pertencente à família Myrtaceae, possui frutos ricos em vitaminas, ferro e fósforo. Este trabalho teve por objetivos fornecer informações sobre aspectos morfológicos do fruto, semente e plântula e avaliar a influência do tamanho da semente na germinação dessa espécie. O fruto é uma baga piriforme, carnoso e indeiscente. O epicarpo é delgado, liso e avermelhado; o mesocarpo e o endocarpo são esbranquiçados e suculentos. Os frutos pesam, em média, 35,57g e medem 7,16cm de comprimento e 5,15cm de largura. As sementes são poliembriônicas e exalbuminosas, pesando, em média, 7,62g. Os cotilédones são maciços e esverdeados. A germinação é hipógea, e a emergência das plântulas inicia-se aos 36 dias após a semeadura. A raiz primária é longa e esbranquiçada. As raízes secundárias são curtas e filiformes. As sementes de maior tamanho são as mais vigorosas, não havendo diferença entre as de tamanho médio e pequeno. O estudo morfológico do jambo-vermelho pode ser utilizado para a identificação da espécie ou em relações ecológicas interespecíficas.

Instituições prevalecentes, tradição e persistência no extrativismo da cera de carnaúba em Limoeiro do Norte -CE

A presente pesquisa visa entender os fatores que explicam a manutenção dos aspectos artesanais no extrativismo da cera de carnaúba em Limoeiro do Norte. Justificamos a exploração desse tema pelo fascínio do autor pelo tema e por ser esse recurso ainda uma importante fonte de renda para produtores e trabalhadores rurais no respectivo município. Objetivamos nessa pesquisa identificar as razões pelas quais a atividade mantém seu padrão tecnológico intacto. Primeiro objetivamos uma descrição do processo produtivo da cera, tanto no passado, quanto no presente, comparando estes momentos e ressaltando o caráter artesanal da atividade, além de analisar a importância atual da atividade para aqueles que ainda lidam com esse tipo de produção, bem como procuramos revelar estrutura histórica e institucional que permeia a lógica e as escolhas destes produtores, a qual pode explicar a preservação destes aspectos artesanais. Utilizando o referencial teórico do institucionalismo, explicamos que a preservação destes aspectos artesanais, ocorre em virtude da prevalência de determinadas instituições, como a memória coletiva cultivada entre os rendeiros idosos e resistentes, a concentração fundiária, responsável pelo arrendamento e também as restritas possibilidades de investimento e poupança no processo produtivo, em face do baixo nível de renda de produtores, os quais com um produto pouco competitivo no mercado, pouco podem fazer para inovar tecnologicamente.

Morfologia de frutos de goiabeira

A eficiência na absorção de nutrientes pelos frutos pode sofrer interferências em função da estrutura morfológica presente. Assim, frente à importância do conhecimento da morfologia dos frutos para um manejo mais adequado dos pomares em termos de adubação foliar, ou de tratamentos pós-colheita para ampliar a vida útil dos mesmos, desenvolveu-se o presente estudo, cujo objetivo foi descrever a morfologia do pericarpo dos frutos de goiabeira. Para isto, amostras do pericarpo de goiabas (cv. Paluma) foram observadas ao microscópio ótico e eletrônico de varredura. Algumas das características observadas, como a presença de cutícula espessa, cêra epicuticular, três camadas subepidérmicas de células compactas e grande quantidade de esclereídeos, bem como a presença esporádica e dispersa de estômatos, podem constituir-se em barreiras para a absorção e movimentação de nutrientes e substâncias aplicadas aos frutos de goiabeira.

Conservação pós-colheita de frutos de pimentão sob diferentes condições de armazenamento e filmes

Este trabalho teve como objetivo avaliar diferentes temperaturas e coberturas na conservação de frutos de pimentão 'Magali-R'. No primeiro experimento, avaliou-se o uso de filme de PVC ou cera, e os frutos foram armazenados a 20ºC e 66%UR, e no segundo experimento associou-se o filme de PVC e cera, com armazenamento a 22°C (67% UR); 12ºC (90% UR) e 5ºC (87% UR). Acompanhou-se a evolução da qualidade dos frutos avaliando-se a massa fresca, a aparência, o aparecimento de podridões e os teores de sólidos solúveis, acidez titulável e ácido ascórbico. A proteção dos pimentões com cera ou filme de PVC foi favorável à manutenção da aparência e da massa fresca, e protegeu-os contra podridões, sem prejuízos aos teores de sólidos solúveis, acidez titulável e ácido ascórbico, com aumento significativo na vida útil para até 33 dias com o armazenamento a 5°C.

Análise de viabilidade técnica de utilização da Fibra de bananeira com resina sintética em Compósitos

This paper aims to present the feasibility of using a composite using discarded material from the cultivation of banana tree (pseudostem), which is fibrillated together with synthetic resin replacing glass fiber to be used in structural elements that do not demand large mechanical stress such as reservoirs, troughs, domes, sewage pipes etc.. For this, there were studies about the mechanical properties of a composite made with polyester resin and fiber of banana tree (Musa sp, musac), in which the splints were removed from the pseudostem, being made fibrillation by hand, with the aid of a brush steel, followed by natural drying. After treatment for cleaning and removal of wax, the fiber was cut into pieces of approximately 60 mm to 100 mm, for, together with synthetic resin, make cards of a features fiber composite with random orientation relative to the weight of the resin. We used three different percentages of fiber (3%, 6% and 9%), in order to make a comparative study between them and what would be the one with the best performance. Were manufactured specimens of each material and then subjected to uniaxial tensile tests, three point bending, moisture absorption and thermal characteristics. The results show that, in general, the use of banana tree fiber is feasible simply by an improvement in the production process (machining of the procedure) and greater care in the manufacture of parts

Estudo da flamabilidade e resistência à chama de compósito de poliéster insaturado e fibra da folha do abacaxizeiro (PALF)

In the present research work, composites were prepared using pine apple leaf fibres (PALF) as reinforcement with unsaturated polyester resin as matrix, incorporating with fire retardant at different compositions. The PALF was obtained from the decortication of pine apple leaves obtained from Ramada 4 from Ielmo Marinho in the State of Rio Grande do Norte. The unsaturated polyester resin and the catalyzer were bought from the local establishment. The fire retardant, aluminium tri-hydroxide - Al(OH)3 was donated by Alcoa Alumínio S.A and was used in the proportions of 20%, 40% and 60% w/w. Initially the fibres were treated with 2% NaOH for 1 hour, to remove any impurities present on the fibre surface, such as wax, fat, pectin and pectate, in order to have a better adsorption of the fibres with the matrix as well as the flame retardant. The fibre mat was prepared in a mat preparator by immersion, developed in the Textile Engineering Laboratory, at the UFRN. The composites (300x300x3 mm) were prepared by compression molding and the samples (150x25x3 mm) for analysis of the properties were cut randomly using a laser cutter. Some of the cut samples were used to measure the smoke emission and fire resistance using UL94 standard. Mechanical tension-extension and flexural properties were carried in CTGás RN and the Laboratório de Metais e Ensaios Mecânicos Engenharia de Materiais UFRN , as well as SEM studies were carried out at Núcleo de Estudos em Petróleo e Gás Natural - UFRN . From the observed results, it was noted that, there was no marked influence of the fire retardant on the mechanical properties. Also in the water absorption test, the quantity of water absorbed was less in the sample with higher concentration of fire retardant. It was also observed that the increase in the proportion of the fire retardant increased the time of burning, may be due to the compactness of the composite due to the presence of fire retardant as a filling material even though it was meant to reduce the rate of inflammability of the composite

Avaliação da temperatura de cristalização da parafina em sistemas: parafina, solvente e tensoativo

The formation of paraffin deposits is common in the petroleum industry during production, transport and treatment stages. It happens due to modifications in the thermodynamic variables that alter the solubility of alkanes fractions present in petroleum. The deposition of paraffin can provoke significant and growing petroleum losses, arriving to block the flow, hindering to the production. This process is associated with the phases equilibrium L-S and the stages and nucleation, growth and agglomeration the crystals. That process is function of petroleum intrinsic characteristics and temperature and pressure variations, during production. Several preventive and corrective methods are used to control the paraffin crystallization, such as: use of chemical inhibitors, hot solvents injection, use of termochemistry reactions, and mechanical removal. But for offshore exploration this expensive problem needs more investigation. Many studies have been carried through Wax Appearance Temperature (WAT) of paraffin; therefore the formed crystals are responsible for the modification of the reologics properties of the oil, causing a lot off operational problems. From the determination of the WAT of a system it is possible to affirm if oil presents or not trend to the formation of organic deposits, making possible to foresee and to prevent problems of wax crystallization. The solvent n-paraffin has been widely used as fluid of perforation, raising the production costs when it is used in the removal paraffin deposits, needing an operational substitute. This study aims to determine the WAT of paraffin and the interference off additives in its reduction, being developed system paraffin/solvent/surfactant that propitiates the wax solubilization. Crystallization temperatures in varied paraffin concentrations and different solvents were established in the first stage of the experiments. In the second stage, using the methodology of variation of the photoelectric signal had been determined the temperature of crystallization of the systems and evaluated the interferences of additives to reduction of the WAT. The experimental results are expressed in function of the variations of the photoelectric signals during controlled cooling, innovating and validating this new methodology to determine WAT, relatively simple with relation the other applied that involve specific equipments and of high cost. Through the curves you differentiate of the results had been also identified to the critical stages of growth and agglomeration of the crystals that represent to the saturation of the system, indicating difficulties of flow due to the increase of the density

Extração de ferro da cera de carnaúba utilizando sistemas microemulsionados

The constant search for biodegradable materials for applications in several fields shows that carnauba wax can be a viable alternative in the manufacturing of biolubricants. Carnauba wax is the unique among the natural waxes to have a combination of properties of great importance. In previous studies it was verified the presence of metals in wax composition that can harm the oxidative stability of lubricants. Considering these factors, it was decided to develop a research to evaluate iron removal from carnauba wax, using microemulsion systems (Me) and perform the optimization of parameters, such as: extraction pH, temperature, extraction time, among others. Iron concentration was determined by atomic absorption and, to perform this analysis, sample digestion in microwave oven was used, showing that this process was very efficient. It was performed some analysis in order to characterize the wax sample, such as: attenuated total reflectance infrared spectroscopy (ATR-IR), thermogravimetry (TG), differential scanning calorimetry (DSC), energy dispersive X-ray fluorescence (EDXRF), scanning electron microscopy (SEM) and melting point (FP). The microemulsion systems were composed by: coconut oil as surfactant, n-butanol as cosurfactant, kerosene and/or heptanes as oil phase, distilled water as water phase. The pH chosen for this study was 4.5 and the metal extraction was performed in finite experiments. To evaluate Me extraction it was performed a factorial design for systems with heptane and kerosene as oil phase, also investigating the influence of temperature time and wax/Me ratio, that showed an statistically significant answer for iron extraction at 95% confidence level. The best result was obtained at 60°C, 10 hours contact time and 1: 10 wax/Me ratio, in both systems with kerosene and heptanes as oil phase. The best extraction occurred with kerosene as oil phase, with 54% iron removal

Modelagem e simulação da deposição de parafinas em escoamento turbulento

The flow assurance has become one of the topics of greatest interest in the oil industry, mainly due to production and transportation of oil in regions with extreme temperature and pressure. In these operations the wax deposition is a commonly problem in flow of paraffinic oils, causing the rising costs of the process, due to increased energy cost of pumping, decreased production, increased pressure on the line and risk of blockage of the pipeline. In order to describe the behavior of the wax deposition phenomena in turbulent flow of paraffinic oils, under different operations conditions, in this work we developed a simulator with easy interface. For that we divided de work in four steps: (i) properties estimation (physical, thermals, of transport and thermodynamics) of n-alkanes and paraffinic mixtures by using correlations; (ii) obtainment of the solubility curve and determination the wax appearance temperature, by calculating the solid-liquid equilibrium of parafinnic systems; (iii) modelling wax deposition process, comprising momentum, mass and heat transfer; (iv) development of graphic interface in MATLAB® environment for to allow the understanding of simulation in different flow conditions as well as understand the matter of the variables (inlet temperature, external temperature, wax appearance temperature, oil composition, and time) on the behavior of the deposition process. The results showed that the simulator developed, called DepoSim, is able to calculate the profile of temperature, thickness of the deposit, and the amount of wax deposited in a simple and fast way, and also with consistent results and applicable to the operation

Estudo da cristalização de parafinas em sistemas solventes/tensoativos/água

The WAT is the temperature at the beginning of the appearance of wax crystals. At this temperature the first wax crystals are formed by the cooling systems paraffin / solvents. Paraffins are composed of a mixture of saturated hydrocarbons of high molecular weight. The removal of petroleum from wells and the production lines means a surcharge on produced oil, thus solubilize these deposits formed due to modifications of thermodynamics has been a constant challenge for companies of oil exploration. This study combines the paraffin solubilization by microemulsion systems, the determination of WAT systems paraffin / solvent and performance of surfactant in reducing the crystallization. We used the methods: rheological and the photoelectric signal, validating the latter which was developed to optimize the data obtained due to sensitivity of the equipment used. Methods developed for description of wax precipitation are often in poor agreement with the experimental data, they tend to underestimate the amount of wax at temperatures below the turbidity point. The Won method and the Ideal solution method were applied to the WAT data obtained in solvent systems, best represented by the second interaction of Won method using the solvents naphtha, hexane and LCO. It was observed that the results obtained by WAT photoelectric signal when compared with the viscosity occur in advance, demonstrating the greatest sensitivity of the method developed. The ionic surfactant reduced the viscosity of the solvent systems as it acted modifying the crystalline structure and, consequently, the pour point. The curves show that the WAT experimental data is, in general, closer to the modeling performed by the method of Won than to the one performed by the ideal solution method, because this method underestimates the curve predicting the onset of paraffin hydrocarbons crystallization temperature. This occurs because the actual temperature measured was the crystallization temperature and the method proposes the fusion temperature measurement.

Caracterização anatômica e fitoquímica de folhas e rizomas de Hedychium coronarium J. König (Zingiberaceae)

Devido a grande potencialidade na utilização de Hedychium coronarium, na medicina popular e também como biorremediadora no tratamento de efluentes, objetivou-se uma diagnose dos órgãos, folha e rizoma, para elucidar resultados estruturais e fitoquímicos. A folha é anfiestomática, com predominância de estômatos na face abaxial. em ambas as superfícies foliares há projeções de cera epicuticular sobre as paredes anticlinais das células epidérmicas. O mesofilo dorsiventral apresenta hipoderme multisseriada (3 camadas) em ambos os lados. O parênquima clorofiliano é diferenciado em paliçádico (1-2 camadas) e lacunoso (4-5 camadas) com muitos espaços intercelulares e ocorrência de idioblastos cristalíferos. Na nervura central, o aerênquima ocorre em único arco na região abaxial. Os feixes vasculares distribuem-se aleatoriamente e são de diferentes tamanhos, pequenos, médios e grandes, envolvidos por fibras. Os feixes menores localizam-se no lado abaxial da nervura. A triagem fitoquímica das folhas mostrou a presença de saponinas e ausência de taninos, antraquinonas, alcalóides e flavonóides. Por meio de Cromatografia em Camada Delgada foram identificadas as presenças de cariofileno e mirceno no óleo essencial bruto obtido a partir das folhas de H. coronarium.

Expressão imuno-histoquímica das proteínas MMP-9, VEGF e FVW em lesões centrais e periféricas de células gigantes

Central giant cell lesion (CGCL) and peripheral giant cell lesion (PGCL) of the jaws have a distinct clinical behavior, although they share histopathologic features. It is still unclear whether these clinical differences are supported by a distinct pattern of immunoexpression of markers for multinucleated giant cells (GC) and mononuclear cells (MC). The purpose of this study was to compare the immunohistochemical expression of VEGF, MMP-9 in CG and MC and measure the vascularization by vWF to check whether there are differences in expression of these biomarkers between CGCL and PGCL. Paraffin wax blocks of 20 cases of LCCG and 20 LPCG were retrieved. MMP-9 immunoreactivity was greater in the CM of PGCL compared to VEGF (p<0.05). VEGF expression was greater in the CM of CGCL compared to PGCL (p<0.05) and it was greater in the overall expression of CGCL compared to PGCL (p<0.05). Vascularity was quantified by microvascular counting (MVC). MVC was greater in the PGCL compared CGCL (p<0.05). MMP-9 showed a greater tendency of expression in CGCL, though was not significant (p>0.05). We tested correlation between the proteins studied in each group and found a significant negative correlation between VEGF and vWF in CGCL (p<0.05). These results suggest that there are differences in the expression of VEGF in CM and overall expression between the lesions, although no statistically significant difference in the overall expression of the MMP-9. Then, there was a trend in increased expression of MMP-9 and VEGF in CGCL, possibly by the involvement of both proteins in osteoclastogenesis. Additionally, the results of this study indicate a higher degree of vascularization in PGCL compared to CGCL, fact that can be directly linked to the reactive nature of the PGCL, where the inflammatory process with its rich angiogenesis contributes significantly to these findings.

Wear resistance of experimental titanium alloys for dental applications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise química de produtos de incrustação em dutos de petróleo por espectometria de fluorescência de raios X

The quantitative chemical characterization of the inorganic fraction of scale products is very relevant in studying, monitoring and controlling corrosive processes of oil pipelines. The X-ray fluorescence spectrometry (XRF) is a very versatile analytical technique, which can be used in quantitative analysis in solid samples at low concentrations of the chemical element, in the order of few ppm. A methodology that involves sample preparation diluted in the proportion of 1:7 (one portion of the sample for seven of wax), pressed as pellets was used in the XRF calibration for chemical analysis of scale products from oil pipelines. The calibration involved the preparation of reference samples from mixtures of P.A. reagents, aiming to optimize the time consumed in the steps of sample preparation and analysis of Al, Ba, Ca, Fe, K, Mg, Mn, Na, P, S, Si, Sr and Ti, using the same pressed pellet for trace and major elements analysis