Factors Facilitating Successful Educational Innovation with ICT in Schools

[EN]This paper proposes an approach to the concept of ICT-based innovation in schools, from the perspective of the factors that facilitate the innovative use of ICT. To this end, a scale has been developed and validated to identify these factors through the participation of 195 teachers from 16 schools considered by the Basque educational authorities as innovators in ICT. The results obtained attest to the validity and reliability of both the scale and the 5 key factors that influence innovation in technology-based teaching. This factor-based structure enables a holistic view of ICT innovation in schools across 3 key areas: school context, teachers and the education authorities.

Tipología de las spin-offs en un contexto universitario: una propuesta de clasificación

[ES] En los últimos tiempos existe un énfasis creciente en la comercialización de la investigación universitaria a través de la creación de empresas (spin-offs). Ahora bien, los fenómenos que el concepto de spin-off universitaria trata de abarcar no son homogéneos. Por esta razón, parece conveniente dilucidar las múltiples realidades que abarca organizándolas mediante tipologías.

Effective Practice in a Digital Age

Effective Practice in a Digital Age is designed for those in further and higher education who aim to enhance the student learning experience through apt and imaginative uses of technology. A visually rich publication, Effective Practice in a Digital Age outlines key aspects of designing learning in a technology-rich context and is structured to address the needs of experienced practitioners as well as those new to technology-based learning and teaching – the ten newly researched case studies offer a choice of pathways reflecting the diversity of approaches taken by practitioners in current UK practice.

Incubadoras y aceleradores de crecimiento: modelo de apoyo a las start-up tecnológicas

[ES]Las políticas de apoyo al emprendimiento se han demostrado imprescindibles para el desarrollo económico de los países. En este contexto las conocidas incubadoras de empresas juegan un papel importante, pero los innovadores aceleradores de crecimiento que están logrando convertir pequeñas start-up en grandes compañías de base tecnológica se presentan como una apuesta para el futuro. La unión de ambos conceptos constituye un modelo eficaz de apoyo a las start-up tecnológicas. En el trabajo se presentan varios estudios que demuestran que mientras que, en las incubadoras los recursos más valorados son el ahorro de costes y el mentoring, los aceleradores obtienen muy buena calificación en todos sus ámbitos. Aun así la facilidad para obtener financiación y el mentoring también son los aspectos más valorados por los participantes en la aceleración. Además se han utilizado dos casos de éxito con el objeto de proponer un corolario de buenas prácticas que ayude entre otros, a la mejora de la situación de la Comunidad Autónoma del País Vasco (CAPV) en cuanto a emprendimiento se refiere.

Multilayer Active Shell Mirrors

This thesis presents a novel active mirror technology based on carbon fiber composites and replication manufacturing processes. Multiple additional layers are implemented into the structure in order to provide the reflective layer, actuation capabilities and electrode routing. The mirror is thin, lightweight, and has large actuation capabilities. These features, along with the associated manufacturing processes, represent a significant change in design compared to traditional optics. Structural redundancy in the form of added material or support structures is replaced by thin, unsupported lightweight substrates with large actuation capabilities.

Several studies motivated by the desire to improve as-manufactured figure quality are performed. Firstly, imperfections in thin CFRP laminates and their effect on post-cure shape errors are studied. Numerical models are developed and compared to experimental measurements on flat laminates. Techniques to mitigate figure errors for thicker laminates are also identified. A method of properly integrating the reflective facesheet onto the front surface of the CFRP substrate is also presented. Finally, the effect of bonding multiple initially flat active plates to the backside of a curved CFRP substrate is studied. Figure deformations along with local surface defects are predicted and characterized experimentally. By understanding the mechanics behind these processes, significant improvements to the overall figure quality have been made.

Studies related to the actuation response of the mirror are also performed. The active properties of two materials are characterized and compared. Optimal active layer thicknesses for thin surface-parallel schemes are determined. Finite element simulations are used to make predictions on shape correction capabilities, demonstrating high correctabiliity and stroke over low-order modes. The effect of actuator saturation is studied and shown to significantly degrade shape correction performance.

The initial figure as well as actuation capabilities of a fully-integrated active mirror prototype are characterized experimentally using a Projected Hartmann test. A description of the test apparatus is presented along with two verification measurements. The apparatus is shown to accurately capture both high-amplitude low spatial-frequency figure errors as well as those at lower amplitudes but higher spatial frequencies. A closed-loop figure correction is performed, reducing figure errors by 94%.

La spin-off universitaria como mecanismo para la transferencia de conocimiento

En los últimos años, ha crecido el número de publicaciones existentes sobre el fenómeno de las spin-offs apareciendo así como un mecanismo revolucionario en el cumplimiento de la tercera misión de la universidad. El presente trabajo analiza la creación de spin-offs universitarias como método para la transferencia de conocimiento universidad-empresa, analizando en un principio la historia de la universidad, los modelos y mecanismos para la transferencia de conocimiento. El análisis continúa con una conceptualización del fenómeno una diferenciación de los tipos de spin-offs, además de destacar sus beneficios y factores condicionantes. Por último, se realiza una síntesis del marco legal vigente y un estudio aplicado sobre esta realidad en la UPV/EHU.

基于电光材料的光学相控阵技术研究进展

综述了基于电光材料的光学相控阵(OPA)的研究进展。介绍了光学相控阵技术的基本原理以及不同电光材料(铌酸锂电光晶体,AlGaAs光波导,液晶和掺镧锆钛酸铅(PLZT)电光陶瓷)光学相控阵技术的基本构想和涉及的关键技术;着重介绍近年来基于PLZT电光陶瓷材料光学相控阵技术的发展情况以及在这方面的最新研究成果,包括单级相控阵、级联相控阵、不同电极结构(表面电极和上下电极结构)相控阵技术等;最后简要介绍了光学相控阵技术在激光雷达等军事领域中的应用。

TRANSFER OF ANALYTICAL METHODS FOR THE CHARACTERISATION OF NATURAL PRODUCTS TO R&D PROCESSES OF IDOKI

IDOKI SCF Technologies S.L. is a technology-based company, set up on September 2006 in Derio (Biscay) with the main scope of developing extraction and purification processes based on the use of supercritical fluid extraction technology (SFE) in food processing, extraction of natural products and the production of personal care products. IDOKI¿s researchers have been working on many different R&D projects so far, most of them using this technology. However, the optimization of a SFE method for the different matrices cannot be performed unless we have an analytical method for the characterisation of the extracts obtained in each experiment. The analytical methods are also essential for the quality control of the raw materials that are going to be used and also for the final product. This PhD thesis was born to tackle this problem and therefore, it is based on the development of different analytical methods for the characterisation of the extracts and products. The projects that we could include in this thesis were the following: the extraction propolis, the recovery of agroindustrial residues (soy and wine) and the dealcoholisation of wine.On the one hand, for the extraction of propolis, several UV-Vis spectroscopic methods were used in order to measure the antioxidant capacity and the total polyphenol and flavonoid content of the extracts. A SFC method was also developed in order to measure more specific phenolic compounds. On the other hand, for the recovery of agroindustrial residues UV-Vis spectroscopy was used to determine the total polyphenol content and two SFC methods were developed to analyse different phenolic compounds. Extraction methods such as MAE, FUSE and rotary agitation were also evaluated for the characterisation of the raw materials.Finally, for the dealcoholisation of wine, the development of a SBSE-TD-GC-MS and DHS-TD-GC-MS methods for the analysis of aromas and a NIR spectroscopic method for the determination of ethanol content with the help of chemometrics was necessary. Most of these methods are typically used in IDOKI¿s lab as routine analyses apart from others not included in this PhD thesis.

基于上转换发光技术的生物传感器及其应用

为实现对特定生物分子的高灵敏度快速检测与分析。采用上转换发光材料作为标记物，研制成功一台基于上转换发光技术的新型光学免疫生物传感器。该传感器利用上转换发光材料在红外光激发下发射可见磷光的特性，通过对免疫层析试纸条上经生物反应而结合上去的上转换发光材料颗粒的含量进行检测，计算出被测样品中特定生物分子的浓度。实验结果表明，该传感器具有较好的生物特异性，对兔抗鼠疫免疫球蛋白(IgG)标准样品的检测灵敏度达到ng／ml量级，并在200～6000ng／ml浓度范围内具有良好的线性响应特性，相关系数R^2≥0．95；

Entrepreneurship in the University of the Basque Country (UPV/EHU)

Currently entrepreneurship is a basic pillar in the socioeconomic area of any country since it contributes to attain the government objectives of job creation and boost of dynamism and competitiveness of the business network. These aspects are even more crucial nowadays due to the global economic crisis. This paper attempts to provide some new insights about the scientific field entrepreneurship in the Basque Country analyzing some aspects related to the entrepreneurial activity, the profile of the entrepreneur and the characteristics of the entrepreneurial businesses. It also aims to provide empirical evidence that proves the good features of the spin-offs and TBF groups as job creators, technology transferors to the society and important actors in the growth and development of the economies for both the business network and its surrounding society. To this aim, a descriptive study has been performed of the firms belonging to the Zitek Program of Bizkaia Campus of the University of the Basque Country (UPV/EHU).