Adubação nitrogenada em cobertura no girassol irrigado nas condições de Cassilândia-MS

Nitrogen is the most required nutrient by plants for exerting important functions in the vegetable metabolism. In sunflower crop, its efficiency causes nutritional disorder, being the nutrient that most limits the yield. Besides, high doses may increase the incidence of pests and diseases, affecting the yield. Hereafter, this experiment was carried out with the aim of evaluating the response of the irrigated sunflower crop (Helianthus annuus L.) submitted to different doses of side dressing nitrogen fertilization applied uncovered nitrogen in small parts. A randomized complete block design, with four replications was used. The constituted by four doses of nitrogen (0, 20, 40, and 80 kg ha(-1)), as urea. Side dressing nitrogen fertilization provides increase in all characteristics studied, and the dose of N of maxim suitable technical efficiency to have a good yield is of 55 kg ha(-1) of N for the cultivation of the sunflower irrigated in the region of Cassilandia, Mato Grosso do Sul State.

Tratamento de materiais contaminados com bifenilas policloradas (PCBS) via extração convencional e fluído supercrítico

The decontamination of the materials has been subject of some studies. One of the factors that it increases the pollution is the lack of responsibility in the discarding of toxic trash, as for example the presence of PCB (Polychlorinated Biphenyls) in the environment. In the Brazilian regulations, the material contaminated with PCB in concentrations higher than 50 ppm must be stored in special places or destroyed, usually by incineration in plasma furnace with dual steps. Due to high cost of the procedure, new methodologies of PCBs removal has been studied. The objective of this study was to develop an experimental methodology and analytical methodology for quantification of removal of PCBs through out the processes of extractions using supercritical fluid and Soxhlet method, also technical efficiency of the two processes of extraction, in the treatment of contaminated materials with PCBs. The materials studied were soils and wood, both were simulated contamination with concentration of 6.000, 33.000 and 60.000 mg of PCB/ kg of materials. Soxhlet extractions were performed using 100 ml of hexane, and temperature of 180 ºC. Extractions by fluid supercritical were performed at conditions of 200 bar, 70°C, and supercritical CO2 flow-rate of 3 g/min for 1-3 hours. The extracts obtained were quantified using Gas chromatography-mass spectrometry (GC/MS). The conventional extractions were made according to factorial experimental planning technique 22, with aim of study the influence of two variables of process extraction for the Soxhlet method: contaminant concentration and extraction time for obtain a maximum removal of PCB in the materials. The extractions for Soxhlet method were efficient for extraction of PCBs in soil and wood in both solvent studied (hexane and ethanol). In the experimental extraction in soils, the better efficient of removal of PCBs using ethanol as solvent was 81.3% than 95% for the extraction using hexane as solvent, for equal time of extraction. The results of the extraction with wood showed statistically it that there is not difference between the extractions in both solvent studied. The supercritical fluid extraction in the conditions studied showed better efficiency in the extraction of PCBs in the wood matrix than in soil, for two hours extractions the obtain percentual of 43.9 ± 0.5 % for the total of PCBs extracted in the soils against 95.1 ± 0,5% for the total of PCBs extracted in the wood. The results demonstrated that the extractions were satisfactory for both technical studied

Caminhos para a universalização dos serviços de água e esgotos no Brasil: a atuação das entidades reguladoras para indução da eficiência dos prestadores de serviços

The deficit of water and sewerage services is a historic problem in Brazil. The introduction of a new regulatory framework, in 2007, presented ways intending to overcome these deficits, among them, the providers efficiency improvement. This thesis aims to analyze the regulators performance regarding its ability to induce the efficiency of the Brazilian water and sewerage services providers. To this end, an analytical approach based on a sequential explanatory strategy was used, and it consists of three steps. In the first step, the Data Envelopment Analysis ( DEA ) was used to measure the providers efficiency in 2006 and 2011. The results show that the average efficiency may be considered high; however significant inefficiencies among the 29 analyzed providers were detected. The ones in the Southeast region showed better performance level and Northeast had the lowest. The local and the private providers were more efficient on average. In 2006 and 2011 the average performance was higher among non-regulated providers. In 2006 the group regulated by local agencies had the best average performance, in 2011, the best performance was the group regulated by the consortium agencies. To analyse the second step was used the Malmquist Index, it pointed that the productivity between 2006 and 2011 dropped. The analysis through decomposing Malmquist Index showed a shift of technical efficiency frontier to a lower level, however was detected a small provider s advance towards the frontier. Only the Midwest region recorded progress in overall productivity. The deterioration in the total factor productivity was higher among regional providers but the local ones and the private agencies moved quickly to the frontier level. The providers regulated from 2007 showed less decrease on the total productivity and the results of the catch up effect were more meaningful. In the last step, the regulators standardization activity analyses noted that there are agencies that had not issued rules until 2011. The most standards topics discussed in the issued rules were the tariff adjustments and the setting of general conditions for the provision and use of services; in another hand, the least covered topics were new technologies incentive and the introduction of efficiency-inducing regulatory mechanisms and productivity gains for price reviews. Regulators created from 2007 were more active proportionately. Even with the advent of the regulatory framework and the creation of new regulatory bodies, the evidence points to a reality in which the actions of these agencies have not been ensuring that providers of water and sewage, regulated by them, has achieved better performance. The non- achievement of regulatory goals can be explained by the incipient level of performance of the Brazilian regulatory authorities, which should be strengthened because of its potential contribution to the Brazilian basic sanitation department

Doses e épocas de aplicação de nitrogênio na cultura do milho em plantio direto sobre Latossolo Vermelho

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Educational decentralization models in Latin America

Includes bibliography

A evolução recente do setor de telefonia móvel: oportunidades e restrições para o desenvolvimento endógeno no Brasil

Pós-graduação em Economia - FCLAR

Avaliação do desempenho da saúde pública com aplicação de métodos de auxílio à tomada de decisão e de gestão estratégica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desempenho zootécnico da tilápia tailandesa, linhagem Chitralada, em tanques-rede no Reservatório de Nova Avanhandava, B uritama, SP: modelo empírico de classificação e repicagem

Pós-graduação em Aquicultura - FCAV

Estimação de metas estratégicas por meio de análise por envoltória de dados e modelo da Barganha de Nash: aplicação na área de saúde publica

Pós-graduação em Engenharia Mecânica - FEG

An empirical examination of relative profitability in the nursing facility industry between ownership form and regionality in the state of Texas

The purpose of this research is to examine the relative profitability of the firm within the nursing facility industry in Texas. An examination is made of the variables expected to affect profitability and of importance to the design and implementation of regulatory policy. To facilitate this inquiry, specific questions addressed are: (1) Do differences in ownership form affect profitability (defined as operating income before fixed costs)? (2) What impact does regional location have on profitability? (3) Do patient case-mix and access to care by Medicaid patients differ between proprietary and non-profit firms and facilities located in urban versus rural regions, and what association exists between these variables and profitability? (4) Are economies of scale present in the nursing home industry? (5) Do nursing facilities operate in a competitive output market characterized by the inability of a single firm to exhibit influence over market price?^ Prior studies have principally employed a cost function to assess efficiency differences between classifications of nursing facilities. The inherent weakness in this approach is that it only considers technical efficiency. Not both technical and price efficiency which are the two components of overall economic efficiency. One firm is more technically efficient compared to another if it is able to produce a given quantity of output at the least possible costs. Price efficiency means that scarce resources are being directed towards their most valued use. Assuming similar prices in both input and output markets, differences in overall economic efficiency between firm classes are assessed through profitability, hence a profit function.^ Using the framework of the profit function, data from 1990 Medicaid Costs Reports for Texas, and the analytic technique of Ordinary Least Squares Regression, the findings of the study indicated (1) similar profitability between nursing facilities organized as for-profit versus non-profit and located in urban versus rural regions, (2) an inverse association between both payor-mix and patient case-mix with profitability, (3) strong evidence for the presence of scale economies, and (4) existence of a competitive market structure. The paper concludes with implications regarding reimbursement methodology and construction moratorium policies in Texas. ^

Competitiveness of the knitwear industry in Bangladesh : a study of industrial development amid global competition

This paper assesses the technical efficiency and profitability of the knitwear industry in Bangladesh taking into account the sector’s role in poverty reduction. While stochastic frontier analysis was invoked to assess technical efficiency, three alternative measures, namely the rate of return, total factor productivity and the Solow residual, were used to gauge the extent and determinants of the profitability of the industry based on firm-level data collected in 2001. The estimation results indicate the high profitability of the knitwear firms. In Bangladesh, the dynamic development of the industry has entailed great diversity in efficiency in comparison with the garment industries of other developing countries. While there is a significant scale effect in profitability and productivity, no supporting evidence was found for the positive impact on competitiveness of industrial upgrading in terms of usage of expensive machinery and vertical integration and industrial agglomeration.

Do PGI integrated farms perform better? The case of the beef farms in Spain

European rural development policy is gaining in importance through one of its key instruments, the Protected Geographical Indications (PGI) system, which is designed to improve quality standards. Previous research has shown that PGI-certified beef farms tend to be more extensively managed operations that are better adapted to mountainous areas. This paper describes a comparative study of two production systems, one with PGI certification and one without, focusing on a number of economic variables. The results show a positive association between PGI production and profitability. In efficiency terms, non-certified farms show better pure technical efficiency scores, while PGI-certified holdings score higher on scale efficiency.

Metodología de evaluación de la eficiencia de los servicios de autobús urbano : aplicación a las grandes ciudades españolas en el período 2004-2009

En estos tiempos de crisis se hace imperativo lograr un consumo de recursos públicos lo más racional posible. El transporte público urbano es un sector al que se dedican grandes inversiones y cuya prestación de servicios está fuertemente subvencionada. El incremento de la eficiencia técnica del sector, entendida como la relación entre producción de servicios y consumo de recursos, puede ayudar a conseguir una mejor gestión de los fondos públicos. Un primer paso para que se produzca una mejora es el desarrollo de una metodología de evaluación de la eficiencia técnica de las compañías de transporte público. Existen diferentes métodos para la evaluación técnica de un conjunto de compañías pertenecientes a un sector. Uno de los más utilizados es el método frontera, en el que se encuentra el análisis envolvente de datos (Data Envelopment Analysis, DEA, por sus siglas en inglés). Este método permite establecer una frontera de eficiencia técnica relativa a un determinado grupo de compañías, en función de un número limitado de variables. Las variables deben cuantificar, por un lado, la prestación de servicios de las distintas compañías (outputs), y por el otro, los recursos consumidos en la producción de dichos servicios (inputs). El objetivo de esta tesis es analizar, mediante el uso del método DEA, la eficiencia técnica de los servicios de autobuses urbanos en España. Para ello, se estudia el número de variables más adecuado para conformar los modelos con los que se obtienen las fronteras de eficiencia. En el desarrollo de la metodología se utilizan indicadores de los servicios de autobús urbano de las principales ciudades de las áreas metropolitanas españolas, para el periodo 2004-2009. In times of crisis it is imperative achieve a consumption of public resources as rational as possible. Urban public transport is a sector devoted to large investments and whose services are heavily subsidized. Increase the technical efficiency of the sector, defined as the ratio of service output and resource consumption, can help achieve a better management of public funds. One step to produce an improvement is the development of a methodology for evaluating the technical efficiency of the public transport companies. There are different methods for the technical evaluation of a set of companies within an industry. One of the most widely used methods is the frontier method, in particular the Data Envelopment Analysis (DEA). This method allows the calculation of a technical efficiency frontier on a specific group of companies, based on a limited number of variables. Variables must quantify, on the one hand, the provision of services of different companies (outputs), and on the other hand, the resources consumed in the production of such services (inputs). The objective of this thesis is to analyze, using the DEA method, the technical efficiency of urban bus services in Spain. For this purpose, it is studied the more suitable variables that can be used in the models to obtain the efficiency frontiers. In developing the methodology are used indicators of urban bus services in major cities of the Spanish metropolitan areas for the period 2004-2009.

Eficiencia en la distribución: una aplicación en el sector de agencias de viajes

El objetivo de este trabajo consiste en estimar la eficiencia productiva y de escala con la que operan los intermediarios del sector minorista español de distribución turístico. Adicionalmente, se pretende examinar los determinantes de la eficiencia en términos de la integración vertical, concentración horizontal, tamaño y resultados de las entidades. La metodología aplicada se apoya en diversas técnicas de medición de eficiencia (paramétrica de naturaleza estocástica y no paramétrica del Análisis Envolvente de Datos, DEA), así como en modelos tobit para conocer el impacto de los factores del mercado y de la empresa sobre los niveles de eficiencia. La aplicación empírica realizada en una muestra de 50 agencias de viaje de nuestro país evidencia, por un lado, unos elevados índices de ineficiencia técnica y de escala, destacando en el último caso los rendimientos decrecientes; y por otro, que el tamaño y el ROA son los factores determinante de la eficiencia de escala, mientras que la concentración del mercado explica la eficiencia técnica.

A Construction Management Framework for Mass Customisation in Traditional Construction

A Mass Customisation model is discussed as a competitive positioning strategy in the marketplace adding value to the customer’s end-use. It includes the user as part of the construction process responding to the customer’s demands and wishes. To the present day, almost all proposals for Mass Customisation have been focused on the design phase and single family houses. The reality is that the processes carried out in the work execution are so inefficient that the costs of the Mass Customisation models are assumed by the customer and they do not offer solutions that support the change management. Furthermore, this inefficiency often makes Mass Customisation unfeasible in terms of deadlines and site management. Therefore, the present proposal focuses on achieving the paradigm of Mass Customisation in the traditional residential construction complementary to the existing proposals in the design phase. All this through the proposal of a framework for the integral management in the work execution, which will address change management introduced by the users offering an efficient and productive model that reduces costs in the process. This model will focus on the synergy between different strategies, techniques and technologies currently used in the construction management (such as Lean Construction or Six Sigma), together with, other strategies and technologies that have proven to be valid solutions in other fields (such as Business Process Management, Service Oriented Architecture, etc.).