Molecular phylogeny of the New World Dipsadidae (Serpentes: Colubroidea): a reappraisal

We present a phylogenetic analysis of the New World dipsadids based on an expanded data matrix that includes 246 terminal taxa including 196 dipsadids. The species are sampled for eight genes (12S, 16S, cytb, nd2, nd4, bdnf, c-mos, rag2). The data are explored using two distinct optimality proceduresmaximum parsimony and maximum likelihoodand two alignment strategiesdynamic homology and static homology. Two previously unsampled dipsadid genera, Sordellina and Rhachidelus, are now included in the analysis. The definitions of the genera, Erythrolamprus, Clelia, Hypsirhynchus, Philodryas and Phimophis, and the tribes Alsophiini, Echinantherini and Conophiini, are revised. In order to maintain monophyly, the genus Umbrivaga is synonymized with Erythrolamprus, and two new genera are erected to accommodate Phimophis iglesiasi and Clelia rustica, as well as their closely related species. The West Indian genera Schwartzophis, Darlingtonia, Antillophis and Ocyophis are resurrected. (c) The Willi Hennig Society 2012.

Water sorption of CH3- and CF3-Bis-GMA based resins with additives

Objectives: To evaluate the effect of additives on the water sorption characteristics of Bis-GMA based copolymers and composites containing TEGDMA, CH(3)Bis-GMA or CF(3)Bis-GMA. Material and methods: Fifteen experimental copolymers and corresponding composites were prepared combining Bis-GMA and TEGDMA, CH(3)Bis-GMA or CF(3)Bis-GMA, with aldehyde or diketone (24 and 32 mol%) totaling 30 groups. For composites, barium aluminosilicate glass and pyrogenic silica was added to comonomer mixtures. Photopolymerization was effected by 0.2 wt% each of camphorquinone and N,N-dimethyl-p-toluidine. Specimen densities in dry and water saturated conditions were obtained by Archimedes' method. Water sorption and desorption were evaluated in a desorption-sorption-desorption cycle. Water uptake (%WU), water desorption (%WD), equilibrium solubility (ES; mu g/mm(3)), swelling (f) and volume increase (%V) were calculated using appropriate equations. Results: All resins with additives had increased %WU and ES. TEGDMA-containing systems presented higher %WU, %WD, ES, f and %V values, followed by resins based on CH(3)Bis-GMA and CF(3)Bis-GMA. Conclusions: Aldehyde and diketone led to increases in the water sorption characteristics of experimental resins.

New insights into Trimezieae (Iridaceae) phylogeny: what do molecular data tell us?

The Neotropical tribe Trimezieae are taxonomically difficult. They are generally characterized by the absence of the features used to delimit their sister group Tigridieae. Delimiting the four genera that make up Trimezieae is also problematic. Previous family-level phylogenetic analyses have not examined the monophyly of the tribe or relationships within it. Reconstructing the phylogeny of Trimezieae will allow us to evaluate the status of the tribe and genera and to examine the suitability of characters traditionally used in their taxonomy. Maximum parsimony and Bayesian phylogenetic analyses are presented for 37 species representing all four genera of Trimezieae. Analyses were based on nrITS sequences and a combined plastid dataset. Ancestral character state reconstructions were used to investigate the evolution of ten morphological characters previously considered taxonomically useful. Analyses of nrITS and plastid datasets strongly support the monophyly of Trimezieae and recover four principal clades with varying levels of support; these clades do not correspond to the currently recognized genera. Relationships within the four clades are not consistently resolved, although the conflicting resolutions are not strongly supported in individual analyses. Ancestral character state reconstructions suggest considerable homoplasy, especially in the floral characters used to delimit Pseudotrimezia. The results strongly support recognition of Trimezieae as a tribe but suggest that both generic- and species-level taxonomy need revision. Further molecular analyses, with increased sampling of taxa and markers, are needed to support any revision. Such analyses will help determine the causes of discordance between the plastid and nuclear data and provide a framework for identifying potential morphological synapomorphies for infra-tribal groups. The results also suggest Trimezieae provide a promising model for evolutionary research.

Limiting the influence of friction on the split Hopkinson pressure bar tests by using a ring specimen

The deformation of a ring under axial compression is analyzed in order to estimate a favorable ring specimen geometry capable of limiting the influence of friction on the stress-strain curve obtained from SHPB tests. The analysis shows that the use of a ring specimen with a large inner diameter and a small radial thickness offers some advantages comparing with the traditional disk sample. In particular, it can improve the reliability of the test results for ductile materials in the presence of friction. Based on the deformation analysis of a ductile ring under compression, a correction coefficient is proposed to relate the actual material stress strain curve with the reading from the SHPB. It is shown using finite element simulation that the proposed correction can be used for a wide range of conventional ductile materials. Experimental results with steel alloys indicate that the correction procedure is an effective technique for an accurate measurement of the dynamic material strength response. (C) 2012 Elsevier Ltd. All rights reserved.

Neotropical termites: revision of Armitermes Wasmann (Isoptera, Termitidae, Syntermitinae) and phylogeny of the Syntermitinae

We present a comprehensive phylogenetic analysis of Syntermitinae, including representatives of all genera of the subfamily, along with all 12 species assigned formerly to the genus Armitermes Wasmann (Termitidae, Syntermitinae), and 4 new species described herein. Syntermitinae was recovered as a natural group and the hypothesis that the frontal tube indicates convergence between Syntermitinae and Nasutitermitinae was corroborated. Also, several diagnostic characters proposed in the original description of Syntermitinae are discussed. Alongside the phylogenetic study, a taxonomic revision of the Neotropical genus Armitermes was carried out, resulting in division of the genus into four genera. Taxonomic novelties are: Armitermes now includes A. armiger (Motschulsky), A. bidentatus Rocha & Cancello sp.n. and A. spininotus Rocha & Cancello sp.n.; Silvestritermes Rocha & Cancello gen.n. includes S. euamignathus (Silvestri) comb.n., S. lanei (Canter) comb.n., S. gnomus (Constantino) comb.n., S. duende Rocha & Cancello sp.n., S. minutus (Emerson) comb.n., S. almirsateri Rocha & Cancello sp.n. and S. holmgreni (Snyder) comb.n.; Uncitermes Rocha & Cancello gen.n. includes U. teevani (Emerson) comb.n.; Mapinguaritermes Rocha & Cancello gen.n. includes M. peruanus (Holmgren) comb.n. and M. grandidens (Emerson) comb.n. A new synonymy is proposed for A. cerradoensis Mathews under S. euamignathus. All soldiers are described and illustrated, as are the mandibles and digestive tract of the worker and the imago caste, when available. We provide a dichotomous key, based on soldiers, for all genera of Syntermitinae, and distribution maps and dichotomous keys, based on soldiers, for the species of Armitermes and all the new genera described herein.

Effects of specimen geometry and loading mode on crack growth resistance curves of a high-strength pipeline girth weld

This work presents an investigation of the ductile tearing properties for a girth weld made of an API 5L X80 pipeline steel using experimentally measured crack growth resistance curves. Use of these materials is motivated by the increasing demand in the number of applications for manufacturing high strength pipes for the oil and gas industry including marine applications and steel catenary risers. Testing of the pipeline girth welds employed side-grooved, clamped SE(T) specimens and shallow crack bend SE(B) specimens with a weld centerline notch to determine the crack growth resistance curves based upon the unloading compliance (UC) method using the single specimen technique. Recently developed compliance functions and η-factors applicable for SE(T) and SE(B) fracture specimens with homogeneous material and overmatched welds are introduced to determine crack growth resistance data from laboratory measurements of load-displacement records.

Molecular diversity of Primula apennina and phylogeny of Primula Subsection Euauricula

Primula apennina Widmer is endemic to the North Apennines (Italy). ISSR were used to detect the genetic diversity within and among six populations representative of the species distribution range. High levels of genetic diversity were revealed both at population (PPB = 75.92%, HS = 0.204, Hpop = 0.319) and at species level (PPB = 96.95%, HT = 0.242, Hsp = 0.381). Nei gene diversity statistics (15.7%), Shannon diversity index (16.3%) and AMOVA (14%) detected a moderate level of interpopulation diversity. Principal coordinate and bayesian analyses clustered the populations in three major groups along a geographic gradient. The correlation between genetic and geographic distances was positive (Mantel test, r = 0.232). All together, these analyses revealed a weak but significant spatial genetic structure in P. apennina, with gene flow acting as a homogenizing force that prevents a stronger differentiation of populations. Conservation measures are suggested based on the observed pattern of genetic variability. P. apennina belongs to Primula subsect. Euauricula which includes 15 species distributed on the whole Alps and Apennines. A phylogenetic analysis was carried out using AFLP markers in order both to clarify the relationships among the species of subsection Euauricula that remained unresolved in previous works and to make some hypoteses on their evolutive dynamics. NJ, PCO and BAPS analyses strongly confirmed the monophyly of P. subsect. Euauricula and all the species form strongly supported clades. NJ tree topology suggested a simultaneous fragmentations of ancestral species in a large number of isolated populations that survived in refugia along the unglaciated margins of the Alps in response to the Pleistocene climatic oscillations.

A molecular phylogeny of bivalve mollusks: ancient radiations and divergences as revealed by mitochondrial genes

The main scope of my PhD is the reconstruction of the large-scale bivalve phylogeny on the basis of four mitochondrial genes, with samples taken from all major groups of the class. To my knowledge, it is the first attempt of such a breadth in Bivalvia. I decided to focus on both ribosomal and protein coding DNA sequences (two ribosomal encoding genes -12s and 16s -, and two protein coding ones - cytochrome c oxidase I and cytochrome b), since either bibliography and my preliminary results confirmed the importance of combined gene signals in improving evolutionary pathways of the group. Moreover, I wanted to propose a methodological pipeline that proved to be useful to obtain robust results in bivalves phylogeny. Actually, best-performing taxon sampling and alignment strategies were tested, and several data partitioning and molecular evolution models were analyzed, thus demonstrating the importance of molding and implementing non-trivial evolutionary models. In the line of a more rigorous approach to data analysis, I also proposed a new method to assess taxon sampling, by developing Clarke and Warwick statistics: taxon sampling is a major concern in phylogenetic studies, and incomplete, biased, or improper taxon assemblies can lead to misleading results in reconstructing evolutionary trees. Theoretical methods are already available to optimize taxon choice in phylogenetic analyses, but most involve some knowledge about genetic relationships of the group of interest, or even a well-established phylogeny itself; these data are not always available in general phylogenetic applications. The method I proposed measures the "phylogenetic representativeness" of a given sample or set of samples and it is based entirely on the pre-existing available taxonomy of the ingroup, which is commonly known to investigators. Moreover, it also accounts for instability and discordance in taxonomies. A Python-based script suite, called PhyRe, has been developed to implement all analyses.

Chimäre Archonta?: vergleichend-morphologische Studien zur Hyolaryngealregion

Chimäre Archonta? Vergleichend-morphologische Studien zur Hyolaryngealregion. Mit Brevia zur Dental- und Tarsalmorphologie. Die Dissertation greift aus phylogenetisch-systematischer Perspektive das Problem des Primatenursprungs auf. Traditionell wurde die Überordnung Archonta (= Primates + Scandentia + Dermoptera + Chiroptera) angenommen, die aufgrund molekularer Befunde nicht mehr als valide eingestuft wird. Eine Klassifikation anhand der Superordo Euarchontoglires (= Primates + Scandentia + Dermoptera + Glires) wird derzeit bevorzugt. Beide Verwandtschaftshypothesen werden in den taxonomischen Analysen berücksichtigt, um den potentiellen Einfluss der Außengruppenwahl auf die Konstellation der Euarchonta (= Primates + Dermoptera + Scandentia) zu bestimmen. Der Schwerpunkt der Untersuchung liegt in der 3D-Rekonstruktion ontogenetischer Stadien der Hyolaryngealregion diverser Spezies der Ordnungen Artiodactyla, Chiroptera, Dermoptera, Primates, Rodentia, Scandentia und Soricomorpha. Mit AMIRA® 3.1.1 konnten basierend auf histologischen Schnittserien 18 dreidimensionale Modelle der überwiegend spätfetalen Zungenbein- und Kehlkopfregion dargestellt werden. Durch das Studium der Knorpelmorphologie und der Larynx-Myologie wurden 150 Merkmale definiert und in eine MacClade®-Datenmatrix überführt. Die auf dem Parsimonie-Prinzip basierenden PAUP®-Analysen sprechen für eine Schwestergruppenbeziehung der Primates und der Dermoptera (= Primatomorpha). Die als Chimäre titulierte Überordnung Archonta wurde als Vehikel verwendet, um die Integration der Chiropteren zu ermöglichen und die Hyolaryngealforschung zu intensivieren, da auch Echolot-Peilung verwendende Taxa Bestandteil der Untersuchung waren. Die morphologischen Ähnlichkeiten des Zungenbein- und Kehlkopfapparates zwischen der basalen Form Rousettus (Pteropodidae) und dem Dermoptera-Vertreter Cynocephalus wurden als symplesiomorphe Merkmale gedeutet. Bei der Außengruppenwahl eines Rodentia-Repräsentanten hingegen konnte in Übereinstimmung mit den molekularen Befunden und nach dem Gros der Lehrmeinung die Schwestergruppenbeziehung der Primates und der Sundatheria bestätigt werden. Zwecks eines umfassenderen Ansatzes wurden im Rahmen einer „total evidence“-Methodik dental- und tarsalmorphologische Merkmale integriert. Das Resultat der Clusteranalyse, basierend auf 263 Merkmalen, modifiziert das Zwischenergebnis und befürwortet in Übereinstimmung mit molekularen Daten als Schwestergruppe der Primaten das Taxon Sundatheria (= Dermoptera + Scandentia). Damit konnte erstmals mittels eines konsequenten phylogenetisch-systematischen Ansatzes der Primaten-Grundplan hinsichtlich der Merkmalsausstattung der Hyolaryngealregion mit 27 Merkmalen rekonstruiert werden. Der Primatenursprung kann mit dem Euarchonta-Grundplan rekonstruiert werden. Für die Sundatheria wurden 12 Grundplanmerkmale definiert

Micro-FEM models based on micro-CT reconstructions for the in vitro characterization of the elastic properties of trabecular bone tissue.

This master’s thesis describes the research done at the Medical Technology Laboratory (LTM) of the Rizzoli Orthopedic Institute (IOR, Bologna, Italy), which focused on the characterization of the elastic properties of the trabecular bone tissue, starting from october 2012 to present. The approach uses computed microtomography to characterize the architecture of trabecular bone specimens. With the information obtained from the scanner, specimen-specific models of trabecular bone are generated for the solution with the Finite Element Method (FEM). Along with the FEM modelling, mechanical tests are performed over the same reconstructed bone portions. From the linear-elastic stage of mechanical tests presented by experimental results, it is possible to estimate the mechanical properties of the trabecular bone tissue. After a brief introduction on the biomechanics of the trabecular bone (chapter 1) and on the characterization of the mechanics of its tissue using FEM models (chapter 2), the reliability analysis of an experimental procedure is explained (chapter 3), based on the high-scalable numerical solver ParFE. In chapter 4, the sensitivity analyses on two different parameters for micro-FEM model’s reconstruction are presented. Once the reliability of the modeling strategy has been shown, a recent layout for experimental test, developed in LTM, is presented (chapter 5). Moreover, the results of the application of the new layout are discussed, with a stress on the difficulties connected to it and observed during the tests. Finally, a prototype experimental layout for the measure of deformations in trabecular bone specimens is presented (chapter 6). This procedure is based on the Digital Image Correlation method and is currently under development in LTM.

Phylogeny of Western Palaearctic long-eared bats (Mammalia, Chiroptera, Plecotus) - a molecular perspective

Die Phylogenie der Westpaläarktischen Langohren (Mammalia, Chiroptera, Plecotus) – eine molekulare Analyse Die Langohren stellen eine Fledermausgattung dar, die fast alle westpaläarktischen Habitate bist zum Polarkreis hin besiedeln und in vielerlei Hinsicht rätselhaft sind. In der Vergangenheit wurden zahlreiche Formen und Varietäten beschrieben. Trotzdem galt für lange Zeit, dass nur zwei Arten in Europa anerkannt wurden. Weitere Arten waren aus Nordafrika, den Kanaren und Asien bekannt, aber auch deren Artstatus wurde vielfach in Frage gestellt. In der vorliegenden Dissertation habe ich mittels molekularer Daten,der partiellen Sequenzierung mitochondrialer Gene (16S rRNA und ND1), sowie der mitochondrialen Kontrollregion, eine molekular Analyse der phylogenetischen Verwandtschaftsverhältnisse innerhalb und zwischen den Linien der westpaläarktischen Langohren durchgeführt. Die besten Substitutionsmodelle wurden berechnet und phylogenetische Bäume mit Hilfe vier verschiedener Methoden konstruiert: dem neighbor joining Verfahren (NJ), dem maximum likelihood Verfahren (ML), dem maximum parsimony Verfahren (MP) und dem Bayesian Verfahren. Sechs Linien der Langohren sind genetisch auf einem Artniveau differenziert: Plecotus auritus, P. austriacus, P. balensis, P. christii, P. sardus, und P. macrobullaris. Im Falle der Arten P. teneriffae, P. kolombatovici und P. begognae ist die alleinige Interpretation der genetischen Daten einzelner mitochondrialer Gene für eine Festlegung des taxonomischen Ranges nicht ausreichend. Ich beschreibe in dieser Dissertation drei neue Taxa: Plecotus sardus, P. kolombatovici gaisleri (=Plecotus teneriffae gaisleri, Benda et al. 2004) and P. macrobullaris alpinus [=Plecotus alpinus, Kiefer & Veith 2002). Morphologische Kennzeichen, insbesondere für die Erkennung im Feld, werden hier dargestellt. Drei der sieben Arten sind polytypisch: P. auritus (eine west- und ein osteuropäische Linie, eine sardische Linie und eine aktuell entdeckte kaukasische Linie, Plecotus kolombatovici (P. k. kolombatovici, P. k. gaisleri und P. k. ssp.) und P. macrobullaris (P. m. macrobullaris und P. m. alpinus). Die Verbreitungsgebiete der meisten Arten werden in dieser Arbeit erstmals ausschließlich anhand genetisch zugeordneter Tiere dargestellt.Die Untersuchung der ökologischen Einnischung der nun anerkannten Formen, insbesondere in Gebieten sympatrischer Verbreitung, bietet ein spannendes und lohnendes Feld für zukünftige Forschungen. Nicht zuletzt muss sich die Entdeckung eines beachtlichen Anteils kryptischer Diversität innerhalb der westpaläarktischen Langohren auch bei der Entwicklung spezieller Artenschutzkonzepte widerspiegeln.

Systematics, phylogeny and biogeography of Cousinia (Asteraceae)

Die Systematik, Phylogenie und Biogeographie der Gattung Cousinia (Asteraceae, Cardueae) als größter Gattung der Tribus Cardueae mit mehr als 600 Arten wurde untersucht. Diese Dissertation umfasst drei Hauptteile: Im ersten Teil wurde die Phylogenie und Evolution des Arctium-Cousinia-Komplexes Untersucht. Dieser Gattungskomplex enthält Arctium, Cousinia, Hypacanthium und Schmalhausenia und zeigt die höchste Diversität in der Irano-Turanischen Region und in den Gebirgen Zentralasiens. Es wurden ITS und rpS4-trnT-trnL-Sequenzen für insgesamt 138 Arten generiert, darunter von 129 (von ca. 600) Arten von Cousinia. Wie in früheren Analysen bereits gefunden, ist Cousinia nicht monophyletisch. Stattdessen sind Cousinia subg. Cynaroides und subg. Hypacanthodes mit insgesamt ca. 30 Arten enger mit Arctium, Hypacanthium und Schmalhausenia (Arctioid Clade) als mit subg. Cousinia (Cousinioid Clade) verwandt. Die Arctioid und Cousiniod clades werden auch durch Pollenmorphologie und Chromosomenzahl unterstützt, wie bereits früher bekannt war. In dem Arctioid Clade entsprechen morphologische Gattungsgrenzen, basierend auf Blattform, Blattbedornung und Morphologie der Involukralblätter, nicht den in der molekularen analyse gefundenen clades. Es kann keine taxonomische Lösung für diesen Konflikt gefunden werden, und die gennanten Merkmale wurden als homoplastisch betrachtet. Obwohl die phylogenetische Auflösung in dem Cousinioid Clade schlecht ist, enthalten die ITS und rpS4-trnT-trnL-Sequenzen phylogenetische Information. So gruppierten z.B. die sechs annuellen Arten in zwei Gruppen. Schlechte phylogenetische Auflösung resultiert wahrscheinlich aus dem Mangel an Merkmalen und der großen Artenzahl in dieser artenreichen und vergleichsweise jungen (ca. 8,7 mya) Linie. Artbildung in dem Cousinioid Clade scheint hauptsächlich allopatrisch zu sein. Der zweite Teil der Dissertation untersucht die Rolle der Hybridisierung in der Evolution von Cousinia s.s. Die in der Vergangenheit publizierteten 28 Hybrid-Kombinationen und 11 Zwischenformen wurden kritisch geprüft, und zwei Hybridindividuen wurden morphologisch und molekular untersucht. Die vermutlichen oder nachgewiesenen Eltern der Hybriden und Zwischenformen wurden auf die aus einer Bayesischen Analyse der ITS-Sequenzen von 216 Arten von Cousinia und verwandten Gattungen resultierenden Phylogenie aufgetragen. Weder Hybriden zwischen dem Cousinioid Clade und anderen Haupt-Claden des Arctium-Cousinia-Komplexes noch zwischen annuellen und perennirenden Arten von Cousinia s.s. wurden beobachtet. Die Ergebnisse zeigen eindeutig, dass Hybridisierung in Cousinia möglich is, und dass ca. 10,7% der Arten an interspezifischer Hybridisierung beteiligt sind. Obwohl Hybridisierung in Cousinia s.s. stattfindet und zu den Schwierigkeiten bei der Rekonstruktion ihrer phylogenetischen Geschichte beitragen könnte, war ihre Rolle für die Entwicklung und Diversität der Gruppe offenbar gering. Im dritten Teil wird eine taxonomische Revision der C. sect. Cynaroideae präsentiert. Cousinia sect. Cynaroideae, die größte Sektion der Gattung mit 110 veröffentlichten Arten, zeichnet sich durch eine Chromosomenzahl von 2n = 24 und durch ± herablaufende Blätter und Hüllblätter mit Anhängseln aus. Sie kommt im Iran, Irak, dem Kaukasus, der Türkei, Turkmenistan, Afghanistan, Pakistan, dem Libanon und Anti-Libanon vor und hat ihre Hauptzentren der Artdiversität im westlichen und nordwestlichen Iran, im Irak und in der südöstlichen Türkei. Die Revision dieser Gruppe, hauptsächlich basierend auf der Untersuchung von ca. 2250 Herbarbögen, führte zu einer Verringerung der Artenzahl auf 31 Arten mit acht Unterarten. Alle Arten werden typifiziert und ausgeschlüsselt, und Beschreibungen, Abbildungen und Verbreitungskarten werden für jede Art angegeben.

Molecular phylogeny and historical zoogeography of four genera of Eastern Atlantic skates (Rajiformes, Rajidae)

The aim of this study was to reconstruct a solid phylogeny of four genera of the Rajidae family (Chondrichthyans: Batoidea) using a concatenated alignment of mtDNA genes. Then use the resultant tree to estimate divergence time between taxa based on molecular clock and fossil calibration and conduct biogeographic analysis. The intent was to prove that the actual distribution of species of Eastern Atlantic and Mediterranean skates is due to a series of vicariant events. The species considered belongs to two different tribe: Rajini (Raja and Dipturus) and Amblyrajini (Leucoraja and Rajella). The choice of this genera is due to their high presence in the area of interest and to the richness of endemic species. The results show that despite the ancient origin of Rajidae (97 MYA), the Eastern Atlantic and Mediterranean faunas originated more recently, during Middle Miocene-Late Pliocene, after the closure of connection between these areas and the Indo-Pacific ocean (15 MYA). The endemic species of the Mediterranean (Raja asterias, R. radula, R. polystigma and Leucoraja melitensis) originated after the Messinian salinity crisis (7-5 MYA), when the recolonization of the basin occurred, and are still maintained in allopatric distribution by the presence of biogeographic barriers. Moreover from 4 to 2.6 MYA we can observe the formation of sister species for Raja, Leucoraja and Rajella, one of which has a Northern distribution, and the other has a Southern distribution (R. clavata vs R. straeleni, L. wallacei vs L. naevus, R. fyllae vs R. caudaspinosa and R. kukujevi vs R. leopardus + R. barnardi). The Quaternary and present oceanographic discontinuities that occur along the western African continental shelf (e.g., Cape Blanc and the Angola–Benguela Front) might contribute to the maintenance of low or null levels of gene flow between these closely related siblings species. Also sympatric speciation must be invoked to explain the evolution of skates, for example for the division between R. leopardus and R. barnardi. The speciation processes followed a south-to-north pathways for Dipturus and a north-to-south pathways for Raja, Leucoraja and Rajella underling that the evolution of the genera occurred independently. In the end, it is conceivable that the evolutionary pathways of the tribes followed the costal line during the gondwana fragmentation. The results demonstrate that the evolution of this family is characterized by a series of parallel and independent speciation events, strictly correlated to the tectonic movement of continental masses and paleogeographic and paleoclimatic events and so can be explained by a panbiogeographical (vicariance) model.

Laser shock peening treatment to control and moderate fatigue crack growth in aircraft structure based on residual stress engineering approach

Laser Shock Peening (LSP) is a surface enhancement treatment which induces a significant layer of beneficial compressive residual stresses of up to several mm underneath the surface of metal components in order to improve the detrimental effects of the crack growth behavior rate in it. The aim of this thesis is to predict the crack growth behavior in metallic specimens with one or more stripes which define the compressive residual stress area induced by the Laser Shock Peening treatment. The process was applied as crack retardation stripes perpendicular to the crack propagation direction with the object of slowing down the crack when approaching the peened stripes. The finite element method has been applied to simulate the redistribution of stresses in a cracked model when it is subjected to a tension load and to a compressive residual stress field, and to evaluate the Stress Intensity Factor (SIF) in this condition. Finally, the Afgrow software is used to predict the crack growth behavior of the component following the Laser Shock Peening treatment and to detect the improvement in the fatigue life comparing it to the baseline specimen. An educational internship at the “Research & Technologies Germany – Hamburg” department of AIRBUS helped to achieve knowledge and experience to write this thesis. The main tasks of the thesis are the following: •To up to date Literature Survey related to “Laser Shock Peening in Metallic Structures” •To validate the FE model developed against experimental measurements at coupon level •To develop design of crack growth slowdown in Centered Cracked Tension specimens based on residual stress engineering approach using laser peened strip transversal to the crack path •To evaluate the Stress Intensity Factor values for Centered Cracked Tension specimens after the Laser Shock Peening treatment via Finite Element Analysis •To predict the crack growth behavior in Centered Cracked Tension specimens using as input the SIF values evaluated with the FE simulations •To validate the results by means of experimental tests

Systematics, phylogeny and biogeography of Juncaginaceae

I investigated the systematics, phylogeny and biogeographical history of Juncaginaceae, a small family of the early-diverging monocot order Alismatales which comprises about 30 species of annual and perennial herbs. A wide range of methods from classical taxonomy to molecular systematic and biogeographic approaches was used. rnrnIn Chapter 1, a phylogenetic analysis of the family and members of Alismatales was conducted to clarify the circumscription of Juncaginaceae and intrafamilial relationships. For the first time, all accepted genera and those associated with the family in the past were analysed together. Phylogenetic analysis of three molecular markers (rbcL, matK, and atpA) showed that Juncaginaceae are not monophyletic. As a consequence the family is re-circumscribed to exclude Maundia which is pro-posed to belong to a separate family Maundiaceae, reducing Juncaginaceae to include Tetroncium, Cycnogeton and Triglochin. Tetroncium is weakly supported as sister to the rest of the family. The reinstated Cycnogeton (formerly included in Triglochin) is highly supported as sister to Triglochin s.str. Lilaea is nested within Triglochin s. str. and highly supported as sister to the T. bulbosa complex. The results of the molecular analysis are discussed in combination with morphological characters, a key to the genera of the family is given, and several new combinations are made.rnrnIn Chapter 2, phylogenetic relationships in Triglochin were investigated. A species-level phylogeny was constructed based on molecular data obtained from nuclear (ITS, internal transcribed spacer) and chloroplast sequence data (psbA-trnH, matK). Based on the phylogeny of the group, divergence times were estimated and ancestral distribution areas reconstructed. The monophyly of Triglochin is confirmed and relationships between the major lineages of the genus were resolved. A clade comprising the Mediterranean/African T. bulbosa complex and the American T. scilloides (= Lilaea s.) is sister to the rest of the genus which contains two main clades. In the first, the widespread T. striata is sister to a clade comprising annual Triglochin species from Australia. The second clade comprises T. palustris as sister to the T. maritima complex, of which the latter is further divided into a Eurasian and an American subclade. Diversification in Triglochin began in the Miocene or Oligocene, and most disjunctions in Triglochin were dated to the Miocene. Taxonomic diversity in some clades is strongly linked to habitat shifts and can not be observed in old but ecologically invariable lineages such as the non-monophyletic T. maritima.rnrnChapter 3 is a collaborative revision of the Triglochin bulbosa complex, a monophyletic group from the Mediterranean region and Africa. One new species, Triglochin buchenaui, and two new subspecies, T. bulbosa subsp. calcicola and subsp. quarcicola, from South Africa were described. Furthermore, two taxa were elevated to species rank and two reinstated. Altogether, seven species and four subspecies are recognised. An identification key, detailed descriptions and accounts of the ecology and distribution of the taxa are provided. An IUCN conservation status is proposed for each taxon.rnrnChapter 4 deals with the monotypic Tetroncium from southern South America. Tetroncium magellanicum is the only dioecious species in the family. The taxonomic history of the species is described, type material is traced, and a lectotype for the name is designated. Based on an extensive study of herbarium specimens and literature, a detailed description of the species and notes on its ecology and conservation status are provided. A detailed map showing the known distribution area of T. magellanicum is presented. rnrnIn Chapter 5, the flower structure of the rare Australian endemic Maundia triglochinoides (Maundiaceae, see Chapter 1) was studied in a collaborative project. As the morphology of Maundia is poorly known and some characters were described differently in the literature, inflorescences, flowers and fruits were studied using serial mictrotome sections and scanning electron microscopy. The phylogenetic placement, affinities to other taxa, and the evolution of certain characters are discussed. As Maundia exhibits a mosaic of characters of other families of tepaloid core Alismatales, its segregation as a separate family seems plausible.