985 resultados para residential buildings


Relevância:

60.00% 60.00%

Publicador:

Resumo:

The goal of the research was to investigate the energy performance of residential vertical buildings envelope in the hot and humid climate of Natal, capital of Rio Grande do Norte, based in the Technical Regulation of Quality for Energy Efficiency Level in Residential Buildings (RTQ -R), launched in 2010. The study pretends to contribute to the development of design strategies appropriate to the specific local climate and the increasing of energy efficiency level of the envelope. The methodological procedures included the survey in 22 (twenty two) residential buildings, the formulation of representative prototypes based on typological and constructives characters researched and the classification of the level of energy efficiency in the envelopment of these prototypes, using as a tool the prescriptive method of the RTQ-R and the parametric analyzes from assigning different values of the following variables: shape of the pavement type; distribution of housing compartments; orientation of the building; area and shading of openings; thermal transmittance, and solar absorptance of opaque materials of the frontage in order to evaluate the influence of these on the envelopment performance. The main results accomplished with this work includes the qualification of vertical residential buildings in Natal/RN; the verification of the adequacy of these buildings to local climate based from the diagnosis of the thermal energy of the envelopment performance, the identification of variables with more significant influence on the prescriptive methodology of RTQ-R and design solutions more favorable to obtain higher levels energy efficiency by this method. Finally, it was verified, that some of these solutions proved contradictory in relation to the recommendations contained in the theoretical approaches regarding environmental comfort in hot and humid weather, which indicates the need for improvement of the prescriptive method RTQ-R and further research on efficient design solutions

Relevância:

60.00% 60.00%

Publicador:

Resumo:

A presente dissertação tem como objetivo a elaboração de uma proposta de certificação hídrica para edifícios residenciais existentes e em fase de projeto. O desenvolvimento desta certificação incide essencialmente na poupança de água potável nos edifícios, demonstrando que o consumo excessivo da mesma poderá traduzir-se num problema no futuro. O uso eficiente da água assume cada vez mais uma importância acrescida. Neste trabalho enumeram-se alguns países da Europa que, devido a uma má gestão da sua água ou às alterações climáticas (como por exemplo, a diminuição da precipitação), se encontram ou poderão se encontrar em “stress hídrico”. É apresentado o Programa Nacional para o Uso Eficiente da Água, fazendo-se referência aos principais objetivos do programa e às medidas propostas para redução de consumos, nomeadamente no setor urbano e em particular ao nível dos sistemas prediais e dos dispositivos em instalações residenciais. Com base nisto, são apresentados consumos e potenciais reduções com a implantação de equipamentos hidricamente eficientes e sistemas de aproveitamento de águas em algumas moradias. Após uma análise de sistemas de certificação da construção sustentável existentes, nacionais e internacionais, é apresentada uma proposta de certificação hídrica de edifícios residenciais. A proposta de certificação é apresentada com recurso a folhas de cálculo Excel.Assenta essencialmente na quantificação dos consumos dos equipamentos sanitários e cálculo do contributo dos sistemas de aproveitamento de águas, sejam cinzentas ou pluviais. À semelhança da certificação energética, a proposta de certificação hídrica faz uma comparação dos consumos da habitação em avaliação com um modelo criado de referência, propondo depois, algumas melhorias que o consumidor pode adotar para melhorar a eficiência da sua residência.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Confirming the Brazilian tendency in the field, the multifamily vertical condominium habitats in Natal are defined as buildings with three or more floors which have been an increasingly used solution. In the mentioned project, the connection between the projectarchitects and the user/ buyers are spread out, by which the first people conceive the realestate property as a creation for the market and not the individual client in specific. Such situation along with technical and financial limitations of the project lead to the adoption of standard solutions to be utilized by clients with different profiles. Besides that, there are various legal and urban parameters by the City Director Plan showing elements of great influence in the final solution adopted by the mentioned edifices. Moving to this subject in general, this project is focused on the case study of the Ed. Ville de Montpellier, having as a base of Post Occupancy Evaluation (POE), considered an efficient tool to analyze and keep up with the progress of the construction of the building, including technical approvals, the application of surveys with the local residents and the creation of informal interviews. The data shows that with time some items that initially motivated the acquisition of the realestate property (with a social common area) move to being less valued, and that the residents quickly alter the pre constructed space, thus seeking to alter the property in a more personal and conforming manner. The possibility of a new emphasis for projects on the mentioned space should also be in discussion, the created project calls for the attention of projected conceptual aspects and interdependence within project and construction which permits the indication of some recommendations for the projection of multifamily residential buildings within the studied realm

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Relatório de estágio para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Edificações

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Buildings and the whole built environment are in a key role when societies are mitigating climate change and adapting to its consequences. More than 50% of the existing residential buildings in EU-25 were built before 1970. Thus, these buildings are of significant importance in reducing energy consumption and CO2 emissions. The existence of more nearly zero energy buildings (nZEB) is a possible solution for this problem. This study aims to analyze the application of the nZEB methodology in the retrofitting of a typical Portuguese dwelling build in 1950. It was shown that the primary energy used can be reduced to a very low value (11,95 kWhep/m2.y) in comparison with the reference consumption (69,15 kWhep/m2.y), with the application of the best construction techniques together with the use of energy from on-site renewable sources.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

A presente dissertação centra-se no estudo das implicações originadas, ao nível das soluções construtivas presentes na envolvente dos edifícios de habitação, pelas recentes alterações efetuadas ao Regulamento de Desempenho Energético de Edifícios de Habitação (REH). Com o intuito de aferir o desempenho energético, através da aplicação do REH, considerou-se como caso de estudo um edifício de habitação novo, unifamiliar com tipologia T3, localizado a cerca de 10 metros acima do nível médio das águas do mar e na periferia da zona urbana de Vila Nova de Gaia. Após o levantamento das necessidades energéticas do edifício em estudo, realizaram-se diversas simulações, com o intuito de identificar e quantificar as alterações provocadas pela entrada em vigor da Portaria 379-A/2015, de 22 de outubro. Inicialmente estudou-se o comportamento térmico da habitação unifamiliar admitindo diferentes soluções construtivas: as soluções que cumpriam com as exigências em vigor até ao final de 2015 e as que cumprem as imposições atuais. Desta forma tentou perceber-se quais as implicações dessas alterações nas necessidades energéticas da habitação. Em seguida, e utilizando o mesmo conceito da simulação inicial, fez-se um estudo considerando que a fração se situava nas diferentes zonas climáticas existentes em Portugal. Para que tal fosse possível, teve que se considerar a implantação da habitação em diferentes localizações geográficas e a diferentes altitudes. Também se procurou avaliar a importância que as pontes térmicas planas assumem nas transferências de calor, nas duas estações. Assim, foi necessário fazer um pré- dimensionamento da solução estrutural adotada, quantificar a área destes elementos e o respetivo coeficiente de transmissão. Quantificou-se, posteriormente, quais as necessidades energéticas obtidas com a solução estrutural perfeitamente definida e as que se obteriam se se desprezasse a sua existência. Com as análises comparativas dos diferentes resultados obtidos, verificou-se que as atualizações das exigências regulamentares a que os edifícios de habitação estão sujeitos originam grande impacto nos sistemas construtivos adotados.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2016.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Nowadays, evaluation methods to measure thermal performance of buildings have been developed in order to improve thermal comfort in buildings and reduce the use of energy with active cooling and heating systems. However, in developed countries, the criteria used in rating systems to asses the thermal and energy performance of buildings have demonstrated some limitations when applied to naturally ventilated building in tropical climates. The present research has as its main objective to propose a method to evaluate the thermal performance of low-rise residential buildings in warm humid climates, through computational simulation. The method was developed in order to conceive a suitable rating system for the athermal performance assessment of such buildings using as criteria the indoor air temperature and a thermal comfort adaptive model. The research made use of the software VisualDOE 4.1 in two simulations runs of a base case modeled for two basic types of occupancies: living room and bedroom. In the first simulation run, sensitive analyses were made to identify the variables with the higher impact over the cases´ thermal performance. Besides that, the results also allowed the formulation of design recommendations to warm humid climates toward an improvement on the thermal performance of residential building in similar situations. The results of the second simulation run was used to identify the named Thermal Performance Spectrum (TPS) of both occupancies types, which reflect the variations on the thermal performance considering the local climate, building typology, chosen construction material and studied occupancies. This analysis generates an index named IDTR Thermal Performance Resultant Index, which was configured as a thermal performance rating system. It correlates the thermal performance with the number of hours that the indoor air temperature was on each of the six thermal comfort bands pre-defined that received weights to measure the discomfort intensity. The use of this rating system showed to be appropriated when used in one of the simulated cases, presenting advantages in relation to other evaluation methods and becoming a tool for the understanding of building thermal behavior

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Dissertação de Mestrado, Engenharia Civil, Especialização em Construção, Instituto Superior de Engenharia, Universidade do Algarve, 2016

Relevância:

60.00% 60.00%

Publicador:

Resumo:

This thesis describes the theoretical, methodological and programmatic proposal for a multifamily residential building located in the urban expansion area of Parnamirim/RN, inserted in the program Minha Casa Minha Vida and level of energy efficiency "A", as the RegulamentoTécnico de Qualidade (RTQ-R/INMETRO) for residential buildings. The development project initially consists of procedures as the study of theoretical, architectural programming and cases studies. With the delimitation of a field solution, situated between the reference and the context, proposals are studied to determine the solution and architectural detailing of the proposal. The architectural program was built based on the method of Problem Seeking (Peña and Parshall, 2001) and research has highlighted aspects of reducing the environmental impact and of the program Minha Casa Minha Vida , among others. The design process was characterized by the incorporation of aspects reviewed and programmed, seeking them compatible and have an economically viable building, socio-spatial quality and energy efficient. The results show that it is possible to obtain a building that meets the constraints of the program that provides housing and energy efficiency level A - and many other environmental qualities and constructive, particularly through architectural design

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The goal of the research was to investigate the energy performance of residential vertical buildings envelope in the hot and humid climate of Natal, capital of Rio Grande do Norte, based in the Technical Regulation of Quality for Energy Efficiency Level in Residential Buildings (RTQ -R), launched in 2010. The study pretends to contribute to the development of design strategies appropriate to the specific local climate and the increasing of energy efficiency level of the envelope. The methodological procedures included the survey in 22 (twenty two) residential buildings, the formulation of representative prototypes based on typological and constructives characters researched and the classification of the level of energy efficiency in the envelopment of these prototypes, using as a tool the prescriptive method of the RTQ-R and the parametric analyzes from assigning different values of the following variables: shape of the pavement type; distribution of housing compartments; orientation of the building; area and shading of openings; thermal transmittance, and solar absorptance of opaque materials of the frontage in order to evaluate the influence of these on the envelopment performance. The main results accomplished with this work includes the qualification of vertical residential buildings in Natal/RN; the verification of the adequacy of these buildings to local climate based from the diagnosis of the thermal energy of the envelopment performance, the identification of variables with more significant influence on the prescriptive methodology of RTQ-R and design solutions more favorable to obtain higher levels energy efficiency by this method. Finally, it was verified, that some of these solutions proved contradictory in relation to the recommendations contained in the theoretical approaches regarding environmental comfort in hot and humid weather, which indicates the need for improvement of the prescriptive method RTQ-R and further research on efficient design solutions

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Dissertação para obtenção do grau de Mestre em Arquitectura, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Confirming the Brazilian tendency in the field, the multifamily vertical condominium habitats in Natal are defined as buildings with three or more floors which have been an increasingly used solution. In the mentioned project, the connection between the projectarchitects and the user/ buyers are spread out, by which the first people conceive the realestate property as a creation for the market and not the individual client in specific. Such situation along with technical and financial limitations of the project lead to the adoption of standard solutions to be utilized by clients with different profiles. Besides that, there are various legal and urban parameters by the City Director Plan showing elements of great influence in the final solution adopted by the mentioned edifices. Moving to this subject in general, this project is focused on the case study of the Ed. Ville de Montpellier, having as a base of Post Occupancy Evaluation (POE), considered an efficient tool to analyze and keep up with the progress of the construction of the building, including technical approvals, the application of surveys with the local residents and the creation of informal interviews. The data shows that with time some items that initially motivated the acquisition of the realestate property (with a social common area) move to being less valued, and that the residents quickly alter the pre constructed space, thus seeking to alter the property in a more personal and conforming manner. The possibility of a new emphasis for projects on the mentioned space should also be in discussion, the created project calls for the attention of projected conceptual aspects and interdependence within project and construction which permits the indication of some recommendations for the projection of multifamily residential buildings within the studied realm

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Information about indoor air temperatures in residential buildings is of interest for a range of reasons, e.g. the health and comfort of occupants, energy demand for space heating and cooling. To date there have been few long term studies that measure and characterise indoor air temperatures in Australian homes. New primary research undertaken by the authors measured temperatures in 273 homes over the period 2011 to 2014 in seven climate zones, from Melbourne in the south to Cairns in the north of Australia. Humidity data was also collected in 20 homes. This paper is a description of the data collected and the subsequent analysis.

Indoor temperatures were compared with outdoor temperatures and a mathematical model was fitted to the data. In general, monthly average indoor temperatures were found to be 2 degreesC higher than monthly average outdoor temperatures, apart from periods with consistently cold weather, where the monthly average outdoor temperature was less than 20 degreesC, which were found to have larger differences. The indoor temperature model developed has been compared with data measured by the Commonwealth Scientific and Industrial Research Organisation (CSIRO) in 438 homes in three Australian cities. The model developed using project measurements are highly consistent with the CSIRO data.

Further data collection compared indoor and outdoor humidity in 20 houses in Sydney and Melbourne. The indoor humidity ratio was found to be, on average, slightly higher than outdoors, but indoor levels generally track outdoor levels quite closely. This is likely due to the high air exchange rate in most houses.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The sea change phenomenon has attracted new residents to Australian coastal towns and brought with it expectations of residential housing formed in metropolitan settings. Consequently, the traditional ‘identifying’ neighbourhood character of these towns is changing. Much larger houses are now being built and site coverage has increased. To date, changes in character have been measured using data based on the subjective judgement of residents through surveys and interviews. More objective information would be beneficial in understanding change. This paper describes a methodology that has been developed to quantify the change in the building footprint in the historic coastal town of Queenscliff in Victoria. Using selected aerial photographs, the building footprint of the town's residential buildings has been estimated at four intervals from 1957 until 2006. This footprint has been compared to the block size at each interval so that changes in house-to-block ratio may be compared. Over 20% of the residential homes were assessed. Building footprint has risen from 30% to over 38% in the documented 50 years. The method developed here is a low-cost method of tracking footprint change over an extended period and informing local planners and residents of when and where the changes have occurred.