Long period gratings in multimode optical fibers: application in chemical sensing

We propose and demonstrate a new technique for evanescent wave chemical sensing by writing long period gratings in a bare multimode plastic clad silica fiber. The sensing length of the present sensor is only 10 mm, but is as sensitive as a conventional unclad evanescent wave sensor having about 100 mm sensing length. The minimum measurable concentration of the sensor reported here is 10 nmol/l and the operating range is more than 4 orders of magnitude. Moreover, the detection is carried out in two independent detection configurations viz., bright field detection scheme that detects the core-mode power and dark field detection scheme that detects the cladding mode power. The use of such a double detection scheme definitely enhances the reliability and accuracy of the results. Furthermore, the cladding of the present fiber need not be removed as done in conventional evanescent wave fiber sensors.

Microbent optical fibers as evanescent wave sensors

Microbent optical fibers are potential candidates for evanescent wave sensing. We investigate the behavior of a permanently microbent fiber optic sensor when it is immersed in an absorbing medium. Two distinct detection schemes, namely, bright-field and dark-field detection configuration, are employed for the measurements. The optical power propagating through the sensor is found to vary in a logarithmic fashion with the concentration of the absorbing species in the surrounding medium. We observe that the sensitivity of the setup is dependent on the bending amplitude and length of the microbend region for the bright-field detection scheme, while it is relatively independent of both for the dark-field detection configuration. This feature can be exploited in compact sensor designs where reduction of the sensing region length is possible without sacrificing sensitivity.

The occurrence of treponemes in contagious ovine digital dermatitis and the characterisation of associated Dichelobacter nodosus

Contagious ovine digital dermatitis (CODD) is a recently recorded, apparently new infection of the ovine hoof, which differs clinically from footrot caused by Dichelobacter nodosus and which fails to respond well to accepted treatment practices for footrot. Despite the welfare implications of such an infection, very little research has been performed on CODD to date and the aetiology remains confused. Suggestions have been made that there is a potential role for treponemes in the pathogenesis of CODD but that D. nodosus is apparently not involved. Six farms were therefore targeted in this study to provide a more in-depth investigation into the bacterial flora of CODD lesions. Dark ground microscopy, culture and PCR techniques were used, concentrating on the presence of D. nodosus and spirochaetes, particularly those of the genus Treponema. The results demonstrated that isolates of D. nodosus were indeed present in a high percentage (74%) of CODD lesions compared with 31% of apparently healthy feet. The isolates were shown to be of similar virulence type to those reported previously in cases of footrot, and the range of serogroups was also found to be similar to footrot, with serogroup H being prevalent. Treponemes were present in 70% of CODD lesions and 38% of apparently healthy feet, supporting a possible association between CODD and treponemes. However, any further progress on the aetiology of CODD and the potential for novel, effective treatment will depend on an improved ability to culture these organisms routinely in the laboratory thereby enabling their complete characterisation. (c) 2005 Elsevier B.V. All rights reserved.

Terahertz spectroscopy and imaging at the nanoscale for biological and security applications

The chemical specificity of terahertz spectroscopy, when combined with techniques for sub-wavelength sensing, is giving new understanding of processes occurring at the nanometre scale in biological systems and offers the potential for single molecule detection of chemical and biological agents and explosives. In addition, terahertz techniques are enabling the exploration of the fundamental behaviour of light when it interacts with nanoscale optical structures, and are being used to measure ultrafast carrier dynamics, transport and localisation in nanostructures. This chapter will explain how terahertz scale modelling can be used to explore the fundamental physics of nano-optics, it will discuss the terahertz spectroscopy of nanomaterials, terahertz near-field microscopy and other sub-wavelength techniques, and summarise recent developments in the terahertz spectroscopy and imaging of biological systems at the nanoscale. The potential of using these techniques for security applications will be considered.

Bilayer graphene formed by passage of current through graphite: evidence for a three-dimensional structure

The passage of an electric current through graphite or few-layer graphene can result in a striking structural transformation, but there is disagreement about the precise nature of this process. Some workers have interpreted the phenomenon in terms of the sublimation and edge reconstruction of essentially flat graphitic structures. An alternative explanation is that the transformation actually involves a change from a flat to a three-dimensional structure. Here we describe detailed studies of carbon produced by the passage of a current through graphite which provide strong evidence that the transformed carbon is indeed three-dimensional. The evidence comes primarily from images obtained in the scanning transmission electron microscope using the technique of high-angle annular dark-field imaging, and from a detailed analysis of electron energy loss spectra. We discuss the possible mechanism of the transformation, and consider potential applications of “three-dimensional bilayer graphene”.

MAGNETOHYDRODYNAMIC SIMULATIONS OF RECONNECTION AND PARTICLE ACCELERATION: THREE-DIMENSIONAL EFFECTS

Magnetic fields can change their topology through a process known as magnetic reconnection. This process in not only important for understanding the origin and evolution of the large-scale magnetic field, but is seen as a possibly efficient particle accelerator producing cosmic rays mainly through the first-order Fermi process. In this work we study the properties of particle acceleration inserted in reconnection zones and show that the velocity component parallel to the magnetic field of test particles inserted in magnetohydrodynamic (MHD) domains of reconnection without including kinetic effects, such as pressure anisotropy, the Hall term, or anomalous effects, increases exponentially. Also, the acceleration of the perpendicular component is always possible in such models. We find that within contracting magnetic islands or current sheets the particles accelerate predominantly through the first-order Fermi process, as previously described, while outside the current sheets and islands the particles experience mostly drift acceleration due to magnetic field gradients. Considering two-dimensional MHD models without a guide field, we find that the parallel acceleration stops at some level. This saturation effect is, however, removed in the presence of an out-of-plane guide field or in three-dimensional models. Therefore, we stress the importance of the guide field and fully three-dimensional studies for a complete understanding of the process of particle acceleration in astrophysical reconnection environments.

Borel-Leroy summability of a nonpolynomial potential

We investigate the perturbation series for the spectrum of a class of Schrodinger operators with potential V = 1/2 x(2) + g(m-1)x(2m)/(1 + alpha gx(2)) which generalize particular cases investigated in the literature in connection with models in laser theory and quantum field theory of particles and fields. It is proved that the series obey a modified strong asymptotic condition of order (m - 1) and have an order (m - 1) strong asymptotic series in g which are shown to be summable in the sense of Borel-Leroy method.

Optimization of incubation time of protein Tc85 in the construction of biosensor: Is the EIS a good tool?

Electrochemical impedance spectroscopy (EIS) in pH 6.9 phosphate buffer solution was used to investigate each step of the procedure employed to modify a screen-printed electrode (SPE). The SPE was modified with self-assembled monolayers (SAMs) of cystamine (CYS, deposited from 20 mM solution), followed by glutaraldehyde (GA, 0.3 M solution). The Trypanosoma cruzi antigen was immobilized using different deposition times. The influence of incubation time (2-18 h) of protein was also investigated. The topography of modified electrode with this protein was investigated by atomic force microscopy (AFM). Interpretation of impedance data was based on physical and chemical adsorption, and degradation of the layer at high and meddle frequencies, and charge transfer reaction involving mainly the reduction of oxygen at low frequencies. EIS studies on modified electrodes with Tc85 protein immobilized for different incubation times indicated that the optimum incubation time was 6-8 h. It was demonstrated that EIS is a good technique to evaluate the different steps and the integrity of the surface modifications, and to optimize the incubation time of protein in the development of biosensors. (C) 2010 Elsevier B.V. All rights reserved.

Chemical modification of a nanocrystalline TiO(2) film for efficient electric connection of glucose oxidase

A novel biosensor for glucose was prepared by adsorption of 1,1`-bis(4-carboxybenzyl)-4,4`-bipyridinium di-bromide compound (H(2)BpybcBr(2)) onto the surface of a nanocrystalline TiO(2) film deposited onto FTO glasses, which was used as a platform to assemble the enzyme glucose oxidase to the electrode surface. The H(2)BpybcBr(2)/TiO(2)/FTO modified electrode was characterized by scanning electron microscopy, X-ray fluorescence image, cyclic voltammograms and spectroelectrochemical measurements. The immobilization of GOD on functionalized TiO(2) film led to stable amperometric biosensing for glucose with a linear range from 153 mu mol L(-1) to 1.30 mmol L(-1) and a detection limit of 51 mu mol L(-1). The apparent Michaelis-Menten constant (K(m)) was estimated to be 3.76 mmol L(-1), which suggested a high enzyme-substrate affinity. The maximum electrode sensitivity was 1.25 mu A mmol L(-1). The study proved that the combination of viologen mediators with TiO(2) film retains the electrocatalytic activity of the enzyme, and also enhances the electron transfer process, and hence regenerating the enzyme in the reaction with glucose. (C) 2010 Elsevier Inc. All rights reserved.

Caracterização de um isolado de Bidens mosaic virus proveniente de alface

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Equivalence between the semiclassical and effective approaches to gravity

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Natural latex graft in lamellar and penetrating sclerectomies in rabbits

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Localized surface plasmon resonance interaction with Er3+-doped tellurite glass

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O mal-estar docente em gestores escolares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização dos resíduos cauliníticos das indústrias de mineração de caulim da Amazônia como matéria-prima para produção de pozolanas de alta reatividade

As regiões do Rio Capim e do Rio Jari são os principais distritos caulinitícos da Região Amazônica, detentores das maiores reservas brasileiras de caulim de alta qualidade para aplicações como cobertura de papel. O caulim é lavrado e beneficiado por três grandes companhias que são responsáveis pela geração de aproximadamente 500 mil de toneladas anuais de um resíduo decorrente da etapa de centrifugação. Esse resíduo, na forma de polpa, é depositado em lagoas de sedimentação que ocupam grandes extensões de áreas. O objetivo da pesquisa foi investigar as características físicas, químicas e mineralógicas dos resíduos processados da Região do Jari e do Capim, de modo a avaliar se atendem aos requisitos como matéria-prima para a produção de uma pozolana de alta reatividade, o metacaulim, adição mineral que incorporada ao cimento Portland proporciona alto desempenho às misturas de concreto e argamassas. Os resíduos foram caracterizados por difração de raios X, análise térmica, espectroscopia de infravermelho, microscopia eletrônica de varredura, fluorescência de raios X e difração a laser. Ambos os resíduos são constituídos por no mínimo 92% de caulinita de baixa granulometria, cujas áreas superficiais específicas são superiores a 8 m²/g e os diâmetros médios de partículas inferiores a 1 µm. Os teores de sílica livre (quartzo) não foram superiores a 3%. O alto grau de concentração de caulinita destes resíduos dispensa os rígidos parâmetros de controle de remoção de impurezas, normalmente empregados na produção deste tipo de pozolana. O caulim do Rio Jari, com quantidade de defeitos na estrutura cristalina superior ao da caulinita do Rio Capim, proporcinou maior grau de desidroxilação a uma temperatura mais baixa quando calcinado, indicando a possibilidade de redução de gastos com energia para a produção da adição mineral. Os resultados das análises foram convergentes e apontam ambos os caulins estudados como excelentes matérias-primas para a produção do metacaulim de alta reatividade.