Cooperative and reconfigurable telecommunication systems based on FPGA

This work has been realized by the author in his PhD course in Electronics, Computer Science and Telecommunication at the University of Bologna, Faculty of Engineering, Italy. The subject of this thesis regards important channel estimation aspects in wideband wireless communication systems, such as echo cancellation in digital video broadcasting systems and pilot aided channel estimation through an innovative pilot design in Multi-Cell Multi-User MIMO-OFDM network. All the documentation here reported is a summary of years of work, under the supervision of Prof. Oreste Andrisano, coordinator of Wireless Communication Laboratory - WiLab, in Bologna. All the instrumentation that has been used for the characterization of the telecommunication systems belongs to CNR (National Research Council), CNIT (Italian Inter-University Center), and DEIS (Dept. of Electronics, Computer Science, and Systems). From November 2009 to May 2010, the author spent his time abroad, working in collaboration with DOCOMO - Communications Laboratories Europe GmbH (DOCOMO Euro-Labs) in Munich, Germany, in the Wireless Technologies Research Group. Some important scientific papers, submitted and/or published on IEEE journals and conferences have been produced by the author.

Design and implementation of a fft pruning engine for DSA-enabled cognitive radios.

This research work presents the design and implementation of a FFT pruning block, which is an extension to the FFT core for OFDM demodulation, enabling run-time 8 pruning of the FFT algorithm, without any restrictions on the distribution pattern of the active/inactive sub-carriers. The design and implementation of FFT processor core is not the part of this work. The whole design was prototyped on an ALTERA STRATIX V FPGA to evaluate the performance of the pruning engine. Synthesis and simulation results showed that the logic overhead introduced by the pruning block is limited to a 10% of the total resources utilization. Moreover, in presence of a medium-high scattering of the sub-carriers, power and energy consumption of the FFT core were reduced by a 30% factor.

Sistemi radiomobili di quinta generazione

La tesi tratta le tecnologie radiomobili di quinta generazione. Analizza i principali problemi, e le più importanti proposte risolutive. Elenca le più importanti idee per ottenere i requisiti richiesti nella quinta generazione di sistemi radiomobili, tra cui il x1000 nella capacità del canale, la latenza < 1ms ecc.. Affronta il dettaglio delle tecnologie proposte da HUAWEI, F-OFDM e SCMA, illustrandone i vantaggi. Si conclude con una parte di simulazioni numeriche Matlab a proposito dell'SCMA.

Multi-antenna non-line-of-sight identification techniques for target localization in mobile ad-hoc networks

Target localization has a wide range of military and civilian applications in wireless mobile networks. Examples include battle-field surveillance, emergency 911 (E911), traffc alert, habitat monitoring, resource allocation, routing, and disaster mitigation. Basic localization techniques include time-of-arrival (TOA), direction-of-arrival (DOA) and received-signal strength (RSS) estimation. Techniques that are proposed based on TOA and DOA are very sensitive to the availability of Line-of-sight (LOS) which is the direct path between the transmitter and the receiver. If LOS is not available, TOA and DOA estimation errors create a large localization error. In order to reduce NLOS localization error, NLOS identifcation, mitigation, and localization techniques have been proposed. This research investigates NLOS identifcation for multiple antennas radio systems. The techniques proposed in the literature mainly use one antenna element to enable NLOS identifcation. When a single antenna is utilized, limited features of the wireless channel can be exploited to identify NLOS situations. However, in DOA-based wireless localization systems, multiple antenna elements are available. In addition, multiple antenna technology has been adopted in many widely used wireless systems such as wireless LAN 802.11n and WiMAX 802.16e which are good candidates for localization based services. In this work, the potential of spatial channel information for high performance NLOS identifcation is investigated. Considering narrowband multiple antenna wireless systems, two xvNLOS identifcation techniques are proposed. Here, the implementation of spatial correlation of channel coeffcients across antenna elements as a metric for NLOS identifcation is proposed. In order to obtain the spatial correlation, a new multi-input multi-output (MIMO) channel model based on rough surface theory is proposed. This model can be used to compute the spatial correlation between the antenna pair separated by any distance. In addition, a new NLOS identifcation technique that exploits the statistics of phase difference across two antenna elements is proposed. This technique assumes the phases received across two antenna elements are uncorrelated. This assumption is validated based on the well-known circular and elliptic scattering models. Next, it is proved that the channel Rician K-factor is a function of the phase difference variance. Exploiting Rician K-factor, techniques to identify NLOS scenarios are proposed. Considering wideband multiple antenna wireless systems which use MIMO-orthogonal frequency division multiplexing (OFDM) signaling, space-time-frequency channel correlation is exploited to attain NLOS identifcation in time-varying, frequency-selective and spaceselective radio channels. Novel NLOS identi?cation measures based on space, time and frequency channel correlation are proposed and their performances are evaluated. These measures represent a better NLOS identifcation performance compared to those that only use space, time or frequency.

Serial or Parallel Linear-Assisted Switching Converter as Envelope Amplifier: Optimization and Comparison

This paper presents a theoretical analysis and an optimization method for envelope amplifier. Highly efficient envelope amplifiers based on a switching converter in parallel or series with a linear regulator have been analyzed and optimized. The results of the optimization process have been shown and these two architectures are compared regarding their complexity and efficiency. The optimization method that is proposed is based on the previous knowledge about the transmitted signal type (OFDM, WCDMA...) and it can be applied to any signal type as long as the envelope probability distribution is known. Finally, it is shown that the analyzed architectures have an inherent efficiency limit.

WiMAX,Technology and Market.

Wireless communication is the transfer of information from one place to another without using wires. From the earliest times, humans have felt the need to develop techniques of remote communication. From this need arose the smoke signals, communication by sun reflection in mirrors and so on. But today the telecommunications electronic devices such as telephone, television, radio or computer. Radio and television are used for one-way communication. Telephone and computer are used for two-way communication. In wireless networks there is almost unlimited mobility, we can access the network almost anywhere or anytime. In wired networks we have the restriction of using the services in fixed area services. The demand of the wireless is increasing very fast; everybody wants broadband services anywhere anytime. WiMAX (Worldwide Interoperability for Microwave Access) is a broadband wireless technology based on IEEE 802.16-2004 and IEEE 802.16e-2005 that appears to solve this demand. WIMAX is a system that allows wireless data transmission in areas of up to 48 km of radius. It is designed as a wireless alternative to ADSL and a way to connect nodes in wireless metropolitan areas network. Unlike wireless systems that are limited in most cases, about 100 meter, providing greater coverage and more bandwidth. WIMAX promises to achieve high data transmission rates over large areas with a great amount of users. This alternative to the networks of broadband access common as DSL o Wi-Fi, can give broadband access to places quickly to rural areas and developing areas around the world. This paper is a study of WIMAX technology and market situation. First, the paper is responsible for explaining the technical aspects of WIMAX. For this gives an overview of WIMAX standards, physical layer, MAC layer and WiMAX, Technology and Market Beijing University of Post and Telecommunications 2 WIMAX network architecture. Second, the paper address the issue of market in which provides an overview of development and deployment of WIMAX to end the future development trend of WIMAX is addressed. RESUMEN: Por comunicaciones inalámbricas se entiende la transferencia de información desde un lugar a otro sin la necesidad de un soporte físico como es por ejemplo el cable. Por lo que remontándose a los principios de la existencia del ser humano, nos damos cuenta de que el ser humano siempre ha sentido la necesidad de desarrollar técnicas para lograr comunicarse a distancia con sus semejantes. De dicha necesidad, surgieron técnicas tan ancestrales como puede ser la comunicación mediante señales de humo o por reflexión de los rayos solares en espejos entre otras. La curiosidad del ser humano y la necesidad de comunicarse a distancia fue la que llevó a Alexander Graham Bell a inventar el teléfono en 1876. La aparición de un dispositivo que permitía comunicarse a distancia permitiendo escuchar la voz de aquella persona con la que se quería hablar, supuso una revolución no solo en el panorama tecnológico, si no también en el panorama social. Pues a parte de permitir comunicaciones a larga distancia, solventó el problema de la comunicación en “tiempo real”. A raíz de este invento, la tecnología en materia de comunicación ha ido avanzando significativamente, más concretamente en lo referido a las comunicaciones inalámbricas. En 1973 se realizó la primera llamada desde un terminal móvil aunque no fue hasta 1983 cuando se empezó a comercializar dicho terminal, lo que supuso un cambio de hábitos y costumbres para la sociedad. Desde la aparición del primer móvil el crecimiento del mercado ha sido exponencial, lo que ha repercutido en una demanda impensable de nuevas aplicaciones integradas en dichos dispositivos móviles que satisfagan las necesidades que día a día autogenera la sociedad. Tras conseguir realizar llamadas a larga distancia de forma inalámbrica, el siguiente paso fue la creación de los SMS (Short Message System) lo que supuso una nueva revolución además de abaratar costes al usuario a la hora de comunicarse. Pero el gran reto para la industria de las comunicaciones móviles surgió con la aparición de internet. Todo el mundo sentía la necesidad de poder conectarse a esa gran base de datos que es internet en cualquier parte y en cualquier momento. Las primeras conexiones a internet desde dispositivos móviles se realizaron a través de la tecnología WAP (Wireless Application Protocol) hasta la aparición de la tecnología GPRS que permitía la conexión mediante protocolo TCP/IP. A partir de estas conexiones han surgido otras tecnologías, como EDGE, HSDPA, etc., que permitían y permiten la conexión a internet desde dispositivos móviles. Hoy en día la demanda de servicios de red inalámbrica crece de forma rápida y exponencial, todo el mundo quiere servicios de banda ancha en cualquier lugar y en cualquier momento. En este documento se analiza la tecnología WiMAX ( Worldwide Interoperability for Microwave Access) que es una tecnología de banda ancha basada en el estándar IEEE 802.16 creada para brindar servicios a la demanda emergente en la banda ancha desde un punto de vista tecnológico, donde se da una visión de la parte técnica de la tecnología; y desde el punto de vista del mercado, donde se analiza el despliegue y desarrollo de la tecnología desde el punto de vista de negocio. WiMAX es una tecnología que permite la transmisión inalámbrica de datos en áreas de hasta 48Km de radio y que está diseñada como alternativa inalámbrica para ADSL y para conectar nodos de red inalámbrica en áreas metropolitanas. A diferencia de los sistemas inalámbricos existentes que están limitados en su mayoría a unos cientos de metros, WiMAX ofrece una mayor cobertura y un mayor ancho de banda que permita dar soporte a nuevas aplicaciones, además de alcanzar altas tasas de transmisión de datos en grandes áreas con una gran cantidad de usuarios. Se trata de una alternativa a las redes de acceso de banda ancha como DSL o Wi-Fi, que puede dar acceso de banda ancha a lugares tales como zonas rurales o zonas en vías de desarrollo por todo el mundo con rapidez. Existen dos tecnologías de WiMAX, WiMAX fijo (basado en el estándar IEEE 802.16d-2004) y WiMAX móvil (basado en el estándar IEEE 802.16e-2005). La tecnología fija está diseñada para comunicaciones punto a multipunto, mientras que la fija lo está para comunicaciones multipunto a multipunto. WiMAX móvil se basa en la tecnología OFDM que ofrece ventajas en términos de latencia, eficiencia en el uso del espectro y soporte avanzado para antenas. La modulación OFDM es muy robusta frente al multitrayecto, que es muy habitual en los canales de radiodifusión, frente al desvanecimiento debido a las condiciones meteorológicas y frente a las interferencias de RF. Una vez creada la tecnología WiMAX, poseedora de las características idóneas para solventar la demanda del mercado, ha de darse el siguiente paso, hay que convencer a la industria de las telecomunicaciones de que dicha tecnología realmente es la solución para que apoyen su implantación en el mercado de la banda ancha para las redes inalámbricas. Es aquí donde entra en juego el estudio del mercado que se realiza en este documento. WiMAX se enfrenta a un mercado exigente en el que a parte de tener que dar soporte a la demanda técnica, ha de ofrecer una rentabilidad económica a la industria de las comunicaciones móviles y más concretamente a las operadoras móviles que son quienes dentro del sector de las telecomunicaciones finalmente han de confiar en la tecnología para dar soporte a sus usuarios ya que estos al fin y al cabo lo único que quieren es que su dispositivo móvil satisfaga sus necesidades independientemente de la tecnología que utilicen para tener acceso a la red inalámbrica de banda ancha. Quizás el mayor problema al que se ha enfrentado WiMAX haya sido la situación económica en la que se encuentra el mundo. WiMAX a comenzado su andadura en uno de los peores momentos, pero aun así se presenta como una tecnología capaz de ayudar al mundo a salir hacia delante en estos tiempos tan duros. Finalmente se analiza uno de los debates existentes hoy en día en el sector de las comunicaciones móviles, WiMAX vs. LTE. Como se puede observar en el documento realmente una tecnología no saldrá victoriosa frente a la otra, si no que ambas tecnologías podrán coexistir y trabajar de forma conjunta.

Optimization of Arq Parameters of Stanag 5066 for the HFDVL Modem

The reliability of bidirectional communication link can be guaranteed with Automatic Repeat Request Procedures (ARQ). The standard STANAG 5066 describes the ARQ procedure for HF communications that can either be applied to existing HF physical layers modems or adapted to future physical layer designs. In this contribution the physical layer parameters of an HF modem (HFDVL), developed by the authors over the last decade, are chosen to optimize the performance of the ARQ procedure described in STANAG 5066. Besides the interleaving length, constellation size and coding type, the OFDM-based HFDVL modem permits the selection of the number of receiver antennas. It will be shown that this parameter gives additional degrees of freedom and permits reliable communication over low SNR HF communication links.

A hardware in the loop design methodology for FPGA system and its application to complex functions

In this work, a unified algorithm-architecture-circuit co-design environment for complex FPGA system development is presented. The main objective is to find an efficient methodology for designing a configurable optimized FPGA system by using as few efforts as possible in verification stage, so as to speed up the development period. A proposed high performance FFT/iFFT processor for Multiband Orthogonal Frequency Division Multiplexing Ultra Wideband (MB-OFDM UWB) system design process is given as an example to demonstrate the proposed methodology. This efficient design methodology is tested and considered to be suitable for almost all types of complex FPGA system designs and verifications.

Implementation of wireless communication based on Software Defined Radio

In current communication systems, there are many new challenges like various competitive standards, the scarcity of frequency resource, etc., especially the development of personal wireless communication systems result the new system update faster than ever before, the conventional hardware-based wireless communication system is difficult to adapt to this situation. The emergence of SDR enabled the third revolution of wireless communication which from hardware to software and build a flexible, reliable, upgradable, reusable, reconfigurable and low cost platform. The Universal Software Radio Peripheral (USRP) products are commonly used with the GNU Radio software suite to create complex SDR systems. GNU Radio is a toolkit where digital signal processing blocks are written in C++, and connected to each other with Python. This makes it easy to develop more sophisticated signal processing systems, because many blocks already written by others and you can quickly put them together to create a complete system. Although the main function of GNU Radio is not be a simulator, but if there is no RF hardware components,it supports to researching the signal processing algorithm based on pre-stored and generated data by signal generator. This thesis introduced SDR platform from hardware (USRP) and software(GNU Radio), as well as some basic modulation techniques in wireless communication system. Based on the examples provided by GNU Radio, carried out some related experiments, for example GSM scanning and FM radio station receiving on USRP. And make a certain degree of improvement based on the experience of some investigators to observe OFDM spectrum and simulate real-time video transmission. GNU Radio combine with USRP hardware proved to be a valuable lab platform for implementing complex radio system prototypes in a short time. RESUMEN. Software Defined Radio (SDR) es una tecnología emergente que está creando un impacto revolucionario en la tecnología de radio convencional. Un buen ejemplo de radio software son los sistemas de código abierto llamados GNU Radio que emplean un kit de herramientas de desarrollo de software libre. En este trabajo se ha empleado un kit de desarrollo comercial (Ettus Research) que consiste en un módulo de procesado de señal y un hardaware sencillo. El módulo emplea un software de desarrollo basado en Linux sobre el que se pueden implementar aplicaciones de radio software muy variadas. El hardware de desarrollo consta de un microprocesador de propósito general, un dispositivo programable (FPGA) y un interfaz de radiofrecuencia que cubre de 50 a 2200MHz. Este hardware se conecta al PC por medio de un interfaz USB de 8Mb/s de velocidad. Sobre la plataforma de Ettus se pueden ejecutar aplicaciones GNU radio que utilizan principalmente lenguaje de programación Python para implementarse. Sin embargo, su módulo de procesado de señal está construido en C + + y emplea un microprocesador con aritmética de coma flotante. Por lo tanto, los desarrolladores pueden rápida y fácilmente construir aplicaciones en tiempo real sistemas de comunicación inalámbrica de alta capacidad. Aunque su función principal no es ser un simulador, si no puesto que hay componentes de hardware RF, Radio GNU sirve de apoyo a la investigación del algoritmo de procesado de señales basado en pre-almacenados y generados por los datos del generador de señal. En este trabajo fin de máster se ha evaluado la plataforma de hardware de DEG (USRP) y el software (GNU Radio). Para ello se han empleado algunas técnicas de modulación básicas en el sistema de comunicación inalámbrica. A partir de los ejemplos proporcionados por GNU Radio, hemos realizado algunos experimentos relacionados, por ejemplo, escaneado del espectro, demodulación de señales de FM empleando siempre el hardware de USRP. Una vez evaluadas aplicaciones sencillas se ha pasado a realizar un cierto grado de mejora y optimización de aplicaciones complejas descritas en la literatura. Se han empleado aplicaciones como la que consiste en la generación de un espectro de OFDM y la simulación y transmisión de señales de vídeo en tiempo real. Con estos resultados se está ahora en disposición de abordar la elaboración de aplicaciones complejas.

Integración de un amplificador de RF de alto rendimiento con un amplificador de envolvente con red de cancelación de rizado mediante la técnica de EER

En este artículo se presenta la integración de un amplificador de envolvente de una etapa con un amplificador de clase E mediante la técnica de Kahn o Eliminación y restauración de envolvente (EER). Esta técnica se basa en la combinación de un amplificador de potencia conmutado de alto rendimiento alimentado por una fuente de alimentación modulada. El amplificador de envolvente se ha implementado con un convertidor reductor síncrono con red de cancelación de rizado, lo cual permite reducir la relación entre la frecuencia de conmutación y el ancho de banda de gran señal del amplificador de envolvente, que es uno de los factores de diseño más limitantes en esta aplicación. Para la mejora de la linealidad se ha usado la técnica de predistorsión realizándose una validación experimental. El amplificador de envolvente conmuta a 4MHz y el amplificador de clase E a 100MHz. El rendimiento total obtenido para una modulación de amplitud en cuadratura (QAM) es del 68%, con un relación de potencia del canal adyacente (ACPR) de 40dB. Para una modulación por multiplexación por división de frecuencias ortogonales (OFDM), se ha obtenido un rendimiento total del 57% y un ACPR de 32dB.1

Design of a Two-Phase buck converter with fourth-order output filter for envelope amplifiers of limited bandwidth

The use of techniques such as envelope tracking (ET) and envelope elimination and restoration (EER) can improve the efficiency of radio frequency power amplifiers (RFPA). In both cases, high-bandwidth DC/DC converters called envelope amplifiers (EA) are used to modulate the supply voltage of the RFPA. This paper addresses the analysis and design of a modified two-phase Buck converter optimized to operate as EA. The effects of multiphase operation on the tracking capabilities are analyzed. The use of a fourth-order output filter is proposed to increase the attenuation of the harmonics generated by the PWM operation, thus allowing a reduction of the ratio between the switching frequency and the converter bandwidth. The design of the output filter is addressed considering envelope tracking accuracy and distortion caused by the side bands arising from the nonlinear modulation process. Finally, the proposed analysis and design methods are supported by simulation results, as well as demonstrated by experiments obtained using two 100-W, 10-MHz, two-phase Buck EAs capable of accurately tracking a 1.5-MHz bandwidth OFDM signal.

Estimation of Time-Limited Channel Spectra From Nonuniform Samples

This paper deals with the estimation of a time-invariant channel spectrum from its own nonuniform samples, assuming there is a bound on the channel’s delay spread. Except for this last assumption, this is the basic estimation problem in systems providing channel spectral samples. However, as shown in the paper, the delay spread bound leads us to view the spectrum as a band-limited signal, rather than the Fourier transform of a tapped delay line (TDL). Using this alternative model, a linear estimator is presented that approximately minimizes the expected root-mean-square (RMS) error for a deterministic channel. Its main advantage over the TDL is that it takes into account the spectrum’s smoothness (time width), thus providing a performance improvement. The proposed estimator is compared numerically with the maximum likelihood (ML) estimator based on a TDL model in pilot-assisted channel estimation (PACE) for OFDM.

A low-complexity lattice-based low-PAR transmission scheme for DSL channels

This paper presents a new low-complexity multicarrier modulation (MCM) technique based on lattices which achieves a peak-to-average power ratio (PAR) as low as three. The scheme can be viewed as a drop in replacement for the discrete multitone (DMT) modulation of an asymmetric digital subscriber line modem. We show that the lattice-MCM retains many of the attractive features of sinusoidal-MCM, and does so with lower implementation complexity, O(N), compared with DMT, which requires O(N log N) operations. We also present techniques for narrowband interference rejection and power profiling. Simulation studies confirm that performance of the lattice-MCM is superior, even compared with recent techniques for PAR reduction in DMT.

Genetic algorithms with applications in wireless communications

Genetic algorithms (GAs) are known to locate the global optimal solution provided sufficient population and/or generation is used. Practically, a near-optimal satisfactory result can be found by Gas with a limited number of generations. In wireless communications, the exhaustive searching approach is widely applied to many techniques, such as maximum likelihood decoding (MLD) and distance spectrum (DS) techniques. The complexity of the exhaustive searching approach in the MLD or the DS technique is exponential in the number of transmit antennas and the size of the signal constellation for the multiple-input multiple-output (MIMO) communication systems. If a large number of antennas and a large size of signal constellations, e.g. PSK and QAM, are employed in the MIMO systems, the exhaustive searching approach becomes impractical and time consuming. In this paper, the GAs are applied to the MLD and DS techniques to provide a near-optimal performance with a reduced computational complexity for the MIMO systems. Two different GA-based efficient searching approaches are proposed for the MLD and DS techniques, respectively. The first proposed approach is based on a GA with sharing function method, which is employed to locate the multiple solutions of the distance spectrum for the Space-time Trellis Coded Orthogonal Frequency Division Multiplexing (STTC-OFDM) systems. The second approach is the GA-based MLD that attempts to find the closest point to the transmitted signal. The proposed approach can return a satisfactory result with a good initial signal vector provided to the GA. Through simulation results, it is shown that the proposed GA-based efficient searching approaches can achieve near-optimal performance, but with a lower searching complexity comparing with the original MLD and DS techniques for the MIMO systems.