Econometrics and decision making: Effects of presentation mode

Much of empirical economics involves regression analysis. However, does thepresentation of results affect economists ability to make inferences for decision makingpurposes? In a survey, 257 academic economists were asked to make probabilisticinferences on the basis of the outputs of a regression analysis presented in a standardformat. Questions concerned the distribution of the dependent variable conditional onknown values of the independent variable. However, many respondents underestimateduncertainty by failing to take into account the standard deviation of the estimatedresiduals. The addition of graphs did not substantially improve inferences. On the otherhand, when only graphs were provided (i.e., with no statistics), respondents weresubstantially more accurate. We discuss implications for improving practice in reportingresults of regression analyses.

Limitations of stimulated echo acquisition mode (STEAM) techniques in cardiac applications.

Stimulated echoes are widely used for imaging functional tissue parameters such as diffusion coefficient, perfusion, and flow rates. They are potentially interesting for the assessment of various cardiac functions. However, severe limitations of the stimulated echo acquisition mode occur, which are related to the special dynamic properties of the beating heart and flowing blood. To the well-known signal decay due to longitudinal relaxation and through-plane motion between the preparation and the read-out period of the stimulated echoes, additional signal loss is often observed. As the prepared magnetization is fixed with respect to the tissue, this signal loss is caused by the tissue deformation during the cardiac cycle, which leads to a modification of the modulation frequency of the magnetization. These effects are theoretically derived and corroborated by phantom and in vivo experiments.

Quantitative analysis of crystal/grain sizes and their distributions in 2D and 3D

We review methods to estimate the average crystal (grain) size and the crystal (grain) size distribution in solid rocks. Average grain sizes often provide the base for stress estimates or rheological calculations requiring the quantification of grain sizes in a rock's microstructure. The primary data for grain size data are either 1D (i.e. line intercept methods), 2D (area analysis) or 3D (e.g., computed tomography, serial sectioning). These data have been used for different data treatments over the years, whereas several studies assume a certain probability function (e.g., logarithm, square root) to calculate statistical parameters as the mean, median, mode or the skewness of a crystal size distribution. The finally calculated average grain sizes have to be compatible between the different grain size estimation approaches in order to be properly applied, for example, in paleo-piezometers or grain size sensitive flow laws. Such compatibility is tested for different data treatments using one- and two-dimensional measurements. We propose an empirical conversion matrix for different datasets. These conversion factors provide the option to make different datasets compatible with each other, although the primary calculations were obtained in different ways. In order to present an average grain size, we propose to use the area-weighted and volume-weighted mean in the case of unimodal grain size distributions, respectively, for 2D and 3D measurements. The shape of the crystal size distribution is important for studies of nucleation and growth of minerals. The shape of the crystal size distribution of garnet populations is compared between different 2D and 3D measurements, which are serial sectioning and computed tomography. The comparison of different direct measured 3D data; stereological data and direct presented 20 data show the problems of the quality of the smallest grain sizes and the overestimation of small grain sizes in stereological tools, depending on the type of CSD. (C) 2011 Published by Elsevier Ltd.

Energy investment in gynes of the Argentine ant Iridomyrmex humilis (Mayr) in relation to the mode of colony founding in ants (Hymenoptera, Formicidae)

The increase in weight, fat and energy content of queens was studied in Iridomyrmex humilis (Mayr) in relation to the mode of colony founding in ants. The increase in energy content of gynes during the time between emergence and mating reaches only 80% in this species in which queens found colonies with the help of workers (dependent mode), whereas it can reach 470% in species in which queens found colonies without the help of workers (independent mode). These results are discussed with regard to the investment in energy required by each mode of colony founding.

Eliminació d'artefactes en EGG mitjançant l'ús de la Multivariate Empirical Mode Decomposition

La tècnica de l’electroencefalograma (EEG) és una de les tècniques més utilitzades per estudiar el cervell. En aquesta tècnica s’enregistren els senyals elèctrics que es produeixen en el còrtex humà a través d’elèctrodes col•locats al cap. Aquesta tècnica, però, presenta algunes limitacions a l’hora de realitzar els enregistraments, la principal limitació es coneix com a artefactes, que són senyals indesitjats que es mesclen amb els senyals EEG. L’objectiu d’aquest treball de final de màster és presentar tres nous mètodes de neteja d’artefactes que poden ser aplicats en EEG. Aquests estan basats en l’aplicació de la Multivariate Empirical Mode Decomposition, que és una nova tècnica utilitzada per al processament de senyal. Els mètodes de neteja proposats s’apliquen a dades EEG simulades que contenen artefactes (pestanyeigs), i un cop s’han aplicat els procediments de neteja es comparen amb dades EEG que no tenen pestanyeigs, per comprovar quina millora presenten. Posteriorment, dos dels tres mètodes de neteja proposats s’apliquen sobre dades EEG reals. Les conclusions que s’han extret del treball són que dos dels nous procediments de neteja proposats es poden utilitzar per realitzar el preprocessament de dades reals per eliminar pestanyeigs.

IDENTITÉ, PROJET, CHANGEMENT : DES REPRÉSENTATIONS SOCIALES AUX LEVIERS DE L'ACTION PUBLIQUE. POUR UN MODE DE GOUVERNANCE AXÉ SUR LE DÉVELOPPEMENT TERRITORIAL. ETUDE DE CAS : CANTON DU JURA (SUISSE)

Thirty years after the Canton of Jura entered sovereignty, it has to be admited that the creation of the newly canton did't fullfill the hopes of economic and demografic growth that many could have expected from political independance. Through a plurality of complementary approaches, the research suggest a closer look at, on one hand, the position of the Canton in its territorial context as well as its structure and dynamics and on the other hand, the representations of the territory and its evolution by the social actors. This in order to formulate a set of social demands (of debate, of openness and of overcoming cleavages) which augurs for a new territoriality regime and testify of a requirement of reflexivity toward the state institutions and actions. The analysis allowed to set in evidence the central role of the couple identity-project in the dynamics of change, and to identifiy three main periods in the recent past of the Canton: a period of territorialization, during which grew a strong collective identity, coupled with a major project of society (the creation of the canton of Jura); then followed a period of deterritorialization, with the fragmentation of the collective identity and the lack of a project of society. Then, the third period, with a paradoxical event, the failure in public vote of the the project Jura open Land (Jura Pays ouvert), which was meant to give a second wind to the Canton. We consider this turning point as the start of a new period (of reterritorialization), with an issue linked with the outlines of a renewed "jurassian" identity and the elaboration of a shared territory project.Trente ans après l'entrée en souveraineté, force est de constater que la création du canton du Jura n'a pas permis de répondre aux espérances de développement économique et démographique que l'indépendance politique devait entraîner dans son sillage. Cette recherche se propose, à travers une pluralité d'approches complémentaires, d'examiner d'une part la position du Canton dans son contexte territorial ainsi que sa structure et sa dynamique; d'autre part, les représentations que se font les acteurs du territoire et de son évolution, pour déboucher sur une série de demandes sociales (de débat, d'ouverture et de dépassement des clivages) qui augurent de la transition vers un nouveau régime de territorialité et témoignent d'une exigence de réflexivité envers les institutions et les actions de l'Etat. L'analyse a permis de mettre en évidence le rôle central du couple identité-projet dans la dynamique de changement et d'identifier trois temps forts dans l'évolution récente du Canton, une phase de territorialisation au cours de laquelle s'est constituée une identité forte doublée d'un projet de société majeur, suivie d'une phase de déterritorialisation avec une fragmentation de l'identité collective et l'absence de projet mobilisateur. Enfin, un moment paradoxal, l'échec du projet Jura Pays ouvert, censé redonner un second souffle au Canton, qui amorce une nouvelle étape (de reterritorialisation) avec un questionnement lié aux contours d'une identité jurassienne renouvelée et à l'élaboration d'un projet de territoire partagé.Les ressorts de la production du territoire et de son développement sont analysés à travers le rôle des représentations sociales dans la constitution identitaire et le projet territorial, à l'exemple du canton du Jura. La mise en évidence du rôle central du couple identité-projet dans la dynamique de changement a permis d'identifier trois temps forts dans l'évolution récente du Canton. Une première phase (la création du canton du Jura), au cours de laquelle s'est constituée une identité forte doublée d'un projet de société majeur, suivie d'une phase au cours de laquelle l'identité collective s'est fragmentée en l'absence de projet mobilisateur (la phase de « gestion » de l'Etat). Puis un moment de rupture (l'échec du projet Jura Pays ouvert) et l'amorce d'une transition vers une nouvelle étape, avec un questionnement lié aux contours d'une identité jurassienne renouvelée, à l'élaboration d'un projet de territoire partagé, et à l'action des pouvoirs publics dans un contexte de repositionnement du Canton.

Formulaire général du négociant, ou Modèles des actes et transactions du commerce de terre et de mer ... par P.-B. Boucher,... suivi du Nouveau mode des comptes courants d'intérêts... par Min Blanchard

Comprend : Nouveau mode des comptes courants d'intérêts, ou Méthode abrégée au moyen de laquelle on peut dresser un compte d'intérêts sans connaître ni l'époque de sa clôture ni le taux de l'intérêt

EEG alpha activity reflects motor preparation rather than the mode of action selection

Alpha-band activity (8-13 Hz) is not only suppressed by sensory stimulation and movements, but also modulated by attention, working memory and mental tasks, and could be sensitive to higher motor control functions. The aim of the present study was to examine alpha oscillatory activity during the preparation of simple left or right finger movements, contrasting the external and internal mode of action selection. Three preparation conditions were examined using a precueing paradigm with S1 as the preparatory and S2 as the imperative cue: Full, laterality instructed by S1; Free, laterality freely selected and None, laterality instructed by S2. Time-frequency (TF) analysis was performed in the alpha frequency range during the S1-S2 interval, and alpha motor-related amplitude asymmetries (MRAA) were also calculated. The significant MRAA during the Full and Free conditions indicated effective external and internal motor response preparation. In the absence of specific motor preparation (None), a posterior alpha event-related desynchronization (ERD) dominated, reflecting the main engagement of attentional resources. In Full and Free motor preparation, posterior alpha ERD was accompanied by a midparietal alpha event-related synchronization (ERS), suggesting a concomitant inhibition of task-irrelevant visual activity. In both Full and Free motor preparation, analysis of alpha power according to MRAA amplitude revealed two types of functional activation patterns: (1) a motor alpha pattern, with predominantly midparietal alpha ERS and large MRAA corresponding to lateralized motor activation/visual inhibition and (2) an attentional alpha pattern, with dominating right posterior alpha ERD and small MRAA reflecting visuospatial attention. The present results suggest that alpha oscillatory patterns do not resolve the selection mode of action, but rather distinguish separate functional strategies of motor preparation.

Nucleation and growth of GaN nanorods on Si (111) surfaces by plasma-assisted molecular beam epitaxy - The influence of Si- and Mg-doping

The self-assembled growth of GaN nanorods on Si (111) substrates by plasma-assisted molecular beam epitaxy under nitrogen-rich conditions is investigated. An amorphous silicon nitride layer is formed in the initial stage of growth that prevents the formation of a GaN wetting layer. The nucleation time was found to be strongly influenced by the substrate temperature and was more than 30 min for the applied growth conditions. The observed tapering and reduced length of silicon-doped nanorods is explained by enhanced nucleation on nonpolar facets and proves Ga-adatom diffusion on nanorod sidewalls as one contribution to the axial growth. The presence of Mg leads to an increased radial growth rate with a simultaneous decrease of the nanorod length and reduces the nucleation time for high Mg concentrations.

Low noise pixel detectors based on gated geiger mode avalanche photodiodes

The gated operation is proposed as an effective method to reduce the noise in pixel detectors based on Geiger mode avalanche photodiodes. A prototype with the sensor and the front-end electronics monolithically integrated has been fabricated with a conventional HV-CMOS process. Experimental results demonstrate the increase of the dynamic range of the sensor by applying this technique.