Sviluppo di materiali compositi a base di Aquivion® PFSA per la valorizzazione catalitica del furfuril alcol

L'elaborato di tesi si è posto l'obiettivo di studiare la sintesi e l'attività catalitica di diversi materiali compositi a base di Aquivion, resina pefluorosolfonica dalle caratteristiche superacide, e vari ossidi su una reazione di valorizzazione catalitica del furfuril alcol. I test catalitici sono stati inizialmente svolti allo scopo di determinare l'influenza delle caratteristiche del catalizzatore e delle condizioni operative. La comparazione dei risultati ottenuti ha successivamente permesso di trarre ulteriori informazioni interessanti sul meccanismo di reazione. In particolare, le proprietà superficiali degli ossidi indagati hanno giocato un ruolo determinante per la generazione di acqua a partire dal solvente alcolico, acqua che è risultata fondamentale per alcuni step della reazione.

Rinforzi grafenici in nanofibre per la modifica di materiali compositi

I CFRP laminati offrono vari vantaggi rispetto ai materiali metallici: su tutti un peso ridotto e migliori proprietà meccaniche. Tuttavia, hanno un basso damping (smorzamento delle vibrazioni) e una bassa resistenza alla delaminazione, che possono portare a forti limitazioni durante la vita d’uso del materiale. Lo scopo del seguente elaborato riguarda la produzione di vari tessuti nanofibrosi in polimeri termoplastici, tra cui Nylon 66, eventualmente additivati con grafene, da includere in laminati compositi al fine di migliorare i problemi sopracitati. I tessuti nanofibrosi sono stati ottenuti mediante la tecnica dell'elettrofilatura, dopo ottimizzazione delle soluzioni e del processo stesso. Prima di essere integrate, le membrane sono state caratterizzate morfologicamente tramite analisi SEM e termicamente mediante analisi DSC. I laminati nano-modificati, prodotti tramite laminazione manuale, sono quindi stati caratterizzati meccanicamente. In particolare, è stata valutata la tenacità a frattura interlaminare in Modo I e II tramite test DCB e ENF. Inoltre, sono stati eseguiti anche test Three-Point Bending al fine di avere un quadro più completo sulle proprietà meccaniche dei compositi nano-modificati.

Modellazione del trattamento a fanghi attivi del depuratore Ponte Metauro di Fano ed indicazioni gestionali per la riduzione dei consumi di energia.

Lo scopo del presente studio è quello di modellare il processo di trattamento delle acque reflue dell’impianto a fanghi attivi Ponte Metauro di Fano. In particolare, si è posta l’attenzione sulle fasi di trattamento secondario, agendo sui parametri che regolano tali processi e simulando il funzionamento ottimale dell’impianto attraverso il programma di modellazione STOAT. Oltre a modellare l’impianto, è stato anche fatto uno studio per cercare di risparmiare i consumi di energia e reagenti. La prima fase quindi è stata incentrata sulla modellazione dell’impianto, soprattutto per i trattamenti secondari, con varie simulazioni per poi arrivare ad avere una rappresentazione corretta del fenomeno che avviene nella realtà. La seconda fase invece è stata incentrata sulla ricerca di un possibile risparmio energetico per ottimizzare i consumi di energia e reagenti all’interno delle vasche.

Nucleosintesi stellare e produzione di elementi chimici nelle stelle

Le stelle sono i corpi celesti fondamentali per comprendere l'evoluzione del nostro Universo. Infatti, attraverso processi di fusione nucleare che avvengono al loro interno, nel corso della loro vita le stelle producono la maggior parte dei metalli che popolano la tavola periodica, non presenti all'inizio della vita dell'Universo e la cui presenza è attribuile soltanto alla nucleosintesi stellare. In questa tesi viene trattato questo aspetto, ovvero la produzione di elementi chimici nelle stelle, seguendo in ordine cronologico le principali fasi della vita delle stelle stesse. Nel primo capitolo sono fornite delle informazioni generali sulle reazioni termonucleari, che sono alla base della vita delle stelle e della produzione di molti elementi chimici. Successivamente, vengono approfondite le catene di reazioni termonucleari che consentono la fusione dell'idrogeno in elio all'interno delle stelle, ovvero la catena protone-protone e il ciclo CNO. Nei capitoli seguenti sono state analizzate le reazioni termonucleari di fusione dell'elio in carbonio, note come processo 3-alfa, e di elementi più pesanti, quali carbonio, neon, ossigeno e silicio, che avvengono quando la stella è ormai una gigante o supergigante rossa. Infine, nell'ultimo capitolo viene descritto come, nelle fasi finali della loro vita, le stelle riescano a produrre elementi più pesanti attraverso processi di cattura neutronica, per poi rilasciarli attraverso le esplosioni di supernove, arricchendo significativamente il mezzo interstellare.

Studio delle interazioni in aria nelle misure di sezione d'urto nell'esperimento FOOT

L’adroterapia è una terapia medica oncologica che consiste nell’irraggiamento della massa tumorale tramite un fascio di particelle cariche, come protoni o ioni pesanti. Ad oggi però, non è ancora stata fatta una stima completa degli effetti causati dagli eventi di frammentazione nucleare tra le particelle del fascio e i nuclei del corpo umano. A tale scopo è nato nel 2017 l’esperimento FOOT (FragmentatiOn Of Target), con l’obiettivo di misurare la sezione d’urto differenziale di tutti i prodotti emessi nella frammentazione nucleare tra il fascio e il paziente. In questa tesi sono stati analizzati i dati acquisiti relativi all’interazione tra un fascio di ioni ossigeno a 400MeV/n su un bersaglio di grafite. Per ottenere una misura quanto migliore delle sezioni d’urto è necessario eliminare gli eventi di frammentazione che avvengono tra il fascio e i nuclei dell’aria posta tra i rivelatori dell’apparato sperimentale. Confrontando l’energia rilasciata in due rivelatori consecutivi si può capire se nell’aria posta fra questi vi sono stati tali eventi.

Crystal Structure Of (3e)-3-(2,4-di-nitro-phen-oxy-meth-yl)-4-phenyl-but-3-en-2-one.

In the title compound, C17H14N2O6, the conformation about the C=C double bond [1.345 (2) Å] is E, with the ketone moiety almost coplanar [C-C-C-C torsion angle = 9.5 (2)°] along with the phenyl ring [C-C-C-C = 5.9 (2)°]. The aromatic rings are almost perpendicular to each other [dihedral angle = 86.66 (7)°]. The 4-nitro moiety is approximately coplanar with the benzene ring to which it is attached [O-N-C-C = 4.2 (2)°], whereas the one in the ortho position is twisted [O-N-C-C = 138.28 (13)°]. The mol-ecules associate via C-H⋯O inter-actions, involving both O atoms from the 2-nitro group, to form a helical supra-molecular chain along [010]. Nitro-nitro N⋯O inter-actions [2.8461 (19) Å] connect the chains into layers that stack along [001].

Histopathological Alterations In The Prostates Of Mongolian Gerbils Exposed To A High-fat Diet And Di-n-butyl Phthalate Individually Or In Combination.

Both high-fat diet and exposure to endocrine-disrupting chemicals have been implicated in susceptibility to pathological prostate lesions, but the consequences of combining the two have not yet been examined. We evaluated the effects of gestational and postnatal exposure to a high-fat diet (20% fat) and low doses of di-n-butyl phthalate (DBP; 5mg/kg/day), individually or in combination, on the tissue response and incidence of pathological lesions in the ventral prostate of adult gerbils. Continuous intake of a high-fat diet caused dyslipidemia, hypertrophy, and promoted the development of inflammatory, premalignant and malignant prostate lesions, even in the absence of obesity. Life-time DBP exposure was obesogenic and dyslipidemic and increased the incidence of premalignant prostate lesions. Combined exposure to DBP and a high-fat diet also caused prostate hypertrophy, but the effects were less severe than those of individual treatments; combined exposure neither induced an inflammatory response nor altered serum lipid content.

Recovery of p-TBC from a butadiene washing stream in a pilot plant

Results obtained in a pilot-scale unit designed for COD removal and p-TBC (p-tert-butylcatechol) recovery from a butadiene washing stream (pH 14, 200,000 mg COD L-1, highly toxic) at a petrochemical industry are presented. By adding H3PO4, phase separation is achieved and p-TBC is successfully recovered (88 g L-1 of washing stream). Information (time for phase separation and organic phase characterization) was gathered for designing a future industrial unit. The estimated heat generation rate was 990 kJ min-1 and 15 min were enough to promote phase separation for a liquid column of approximately 1.15 m.

Experimental studies of di-jet survival and surface emission bias in Au plus Au collisions via angular correlations with respect to back-to-back leading hadrons

We report first results from an analysis based on a new multi-hadron correlation technique, exploring jet-medium interactions and di-jet surface emission bias at the BNL Relativistic Heavy Ion Collider (RHIC). Pairs of back-to-back high-transverse-momentum hadrons are used for triggers to study associated hadron distributions. In contrast with two-and three-particle correlations with a single trigger with similar kinematic selections, the associated hadron distribution of both trigger sides reveals no modification in either relative pseudorapidity Delta eta or relative azimuthal angle Delta phi from d + Au to central Au + Au collisions. We determine associated hadron yields and spectra as well as production rates for such correlated back-to-back triggers to gain additional insights on medium properties.

Azimuthal di-hadron correlations in d plus Au and Au plus Au collisions at root s(NN)=200 GeV measured at the STAR detector

Yields, correlation shapes, and mean transverse momenta p(T) of charged particles associated with intermediate-to high-p(T) trigger particles (2.5 < p(T) < 10 GeV/c) in d + Au and Au + Au collisions at root s(NN) = 200 GeV are presented. For associated particles at higher p(T) greater than or similar to 2.5 GeV/c, narrow correlation peaks are seen in d + Au and Au + Au, indicating that the main production mechanism is jet fragmentation. At lower associated particle pT < 2 GeV/c, a large enhancement of the near- (Delta phi similar to 0) and away-side (Delta phi similar to pi) associated yields is found, together with a strong broadening of the away-side azimuthal distributions in Au + Au collisions compared to d + Au measurements, suggesting that other particle production mechanisms play a role. This is further supported by the observed significant softening of the away-side associated particle yield distribution at Delta phi similar to pi in central Au + Au collisions.

Effect of the processing conditions and the addition of trans-polyoctenylene rubber on the properties of natural rubber/styrene-butadiene rubber blends

In this study, the influence of the processing conditions and the addition of trans-polyoctenylene rubber (TOR) on Mooney viscosity, tensile properties, hardness, tearing resistance, and resilience of natural rubber/styrene-butadiene rubber blends was investigated. The results obtained are explained in light of dynamic mechanical and morphological analyses. Increasing processing time produced a finer blend morphology, which resulted in an improvement in the mechanical properties. The addition of TOR involved an increase in hardness, a decrease in tear resistance, and no effect on the resilience. It resulted in a large decrease in the Mooney viscosity and a slight decrease in the tensile properties if the components of the compounds were not properly mixed. The results indicate that TOR acted more as a plasticizer than a compatibilizer. (c) 2008 Wiley Periodicals, Inc.

Neuropharmacological effects in mice of Lychnophora species (Vernonieae, Asteraceae) and anticonvulsant activity of 4,5-di-O-[E]-caffeoylquinic acid isolated from the stem of L-rupestris and L-staavioides

Aiming at contributing with the search for neuroactive substances from natural sources, we report for the first time antinociceptive and anticonvulsant effects of some Lychnophora species. We verify the protective effects of polar extracts (600 mg/kg, intraperitoneally), and methanolic fractions of L. staavioides and L. rupestris (100 mg/kg, intraperitoneally) in pentylenetetrazole-induced seizures on mice. Previously, a screening was accomplished, evaluating the antinociceptive central activity (hot plate test), with different extracts of L. rupestris, L. staavioides and L. diamantinana. It was possible to select the possible extracts of Lychnophora with central nervous system activity. Some of the active extracts were submitted to fractionation and purification process and the methanolic fractions of L. rupestris (stem) and L. staavioides (stem), with anticonvulsant properties (100 mg/kg, intraperitoneally), yielded 4,5-di-O-[E]-caffeoylquinic acid. This substance was injected intraperitoneally in mice and showed anticonvulsant effect against pentylenetetrazole-induced seizures at doses of 25 and 50 mg/kg. It has often been shown that seizures induced by pentylenetetrazole are involved in inhibition and/or attenuation of GABAergic neurotransmission. However, other systems of the central nervous system such as adenosinergic and glutamatergic could be involved in the caffeoylquinic acid effects. Further studies should be conducted to verify that the target receptor could be participating in this anticonvulsant property. Although other investigations have reported a series of biological activities from Lychnophora species, this is the first report of central analgesic and anticonvulsant activity in species of this genus.

Copper(II) complexes of mono- and di-nucleating hexaamines

The potentially hexadentate polyamines N,N,N',N'-tetrakis(2-aminoethyl)ethane-1,2-diamine (L-1) and the octamethylated analogue N,N,N',N'-tetrakis(2-dimethylaminoethyl)ethane 1,2-diamine (L-2) have been complexed with copper(II) and the crystal structures of their complexes determined. A trigonal-bipyramidal co-ordination geometry for [Cu(HL1)][ClO4](3) was found where one aminoethyl arm is not co-ordinated. By contrast, a dinuclear structure of formula [(H2O)Cu(L-2)Cu(OH)](3+) was determined for the N-methylated analogue, where the hexaamine acts as a bridging ligand between the two square-pyramidal metal centres. Electronic and EPR spectroscopy are both consistent with these structures being maintained in solution.

Stage-specific proteophosphoglycan from Leishmania mexicana amastigotes - Structural characterization of novel mono-, di-, and triphosphorylated phosphodiester-linked oligosaccharides

Intracellular amastigotes of the protozoan parasite Leishmania mexicana secrete a macromolecular proteophosphoglycan (aPPG) into the phagolysosome of their host cell, the mammalian macrophage. The structures of aPPG glycans were analyzed by a combination of high pH anion exchange high pressure liquid chromatography, gas chromatography-mass spectrometry, enzymatic digestions, electrospray-mass spectrometry as well as H-1 and P-31 NMR spectroscopy. Some glycans are identical to oligosaccharides known from Leishmania mexicana promastigote lipophosphoglycan and secreted acid phosphatase, However, the majority of the aPPG glycans represent amastigote stage-specific and novel structures. These include neutral glycans ([Glc beta(1-3)](1-2)Gal beta 1-4Man, Gal beta 1-3Gal beta 1-4Man, Gal beta 1-3Glc beta 1-3Gal beta 1-4Man), several monophosphorylated glycans containing the conserved phosphodisaccharide backbone (R-3-[PO4-6-Gal]beta 1-4Man) but carrying stage-specific modifications (R = Gal beta 1-, [Glc beta 1-3](1-2)Glc beta 1-), and monophosphorylated aPPG tri- and tetrasaccharides that are uniquely phosphorylated on the terminal hexose (PO4-6-Glc beta 1-3Gal beta 1-4Man, PO4-6-Glc beta 1-3Glc beta 1-3Gal beta 1-4Man, PO4-6-Gal beta 1-3Glc beta 1-3Gal beta 1-4Man), In addition aPPG contains highly unusual di- and triphosphorylated glycans whose major species are PO4-6-Glc beta 1-3Glc beta 1-3[PO4-6-Gal]beta 1-4Man, PO4-6-Gal beta 1-3Glc beta 1-3 [PO4-6-Gal]beta 1-4Man, PO4-6-GaL beta 1-3Glc beta 1-3Glc beta 1-3[PO4-6-Gal]beta 1-4Man, PO4-6-Glc beta 1-3[PO4-6-Glc]beta 1-3[PO4-6-Gal]beta 1-4Man, PO4-6Gal beta 1-3[PO4-6-Glc]beta 1-3Glc beta 1-3[PO4-6-Gal]beta 1-4Man, and PO4-6-Glc beta 1-3[PO4-6-Glc]beta 1-3Glc beta 1-3[PO4-6-Gal]beta 1-4Man. These glycans are linked together by the conserved phosphodiester R-Man alpha 1-PO4-6-Gal-R or the novel phosphodiester R-Man alpha 1-PO4-6-Glc-R and are connected to Ser(P) of the protein backbone most likely via the linkage R-Man alpha 1-PO4-Ser. The variety of stage-specific glycan structures in Leishmania mexicana aPPG suggests the presence of developmentally regulated amastigote glycosyltransferases which may be potential anti-parasite drug targets.

A comparative study of the effects of UV- and gamma-radiation on copolymers of acrylonitrile/butadiene

The radiolysis of nitrile rubbers with different acrylonitrile/butadiene composition and the homopolymers, poly(butadiene) (PBD) and poly(acrylonitrile) (PAN) has been investigated and compared with the photolysis of the same polymers. A significantly different mechanism of degradation was found for the two types of radiation. The results obtained by ESR, FTIR and measurements of soluble fractions of irradiated samples, indicated that the acrylonitrile units of the nitrile rubbers are more sensitive units to gamma-radiation, with the effects of irradiation increasing with the acrylonitrile content. The reactions observed were consumption of double bonds, crosslinking, and cyclization with the formation of conjugated double bonds. No chain-scission reactions were detected. In contrast to gamma-irradiation, the effects of photolysis were centred at the butadiene units, and increases in the acrylonitrile content resulted in a proportional decrease in the sensitivity of the copolymers. Crosslinking and chain scission were identified as the main effects of photolysis of NBR rubbers. (C) 1999 Society of Chemical Industry.