Discretion and control in education:the teacher as street-level bureaucrat

This article assesses the impact of education reform and the new public management (NPM) on the discretion of school teachers. The focal point of the study is Michael Lipsky's theory of discretion which casts public service professionals and others involved in service delivery as 'street-level bureaucrats' because their high degree of discretionary rule-making power enabled them to effectively make policy as well as implement it. The article considers the relationship between education reform and the NPM and focuses on the increased emphasis on skills-based teaching and changes in management and leadership in schools. The literature and survey of teachers demonstrate that discretion in the workplace has been eroded to such an extent due to a high degree of central regulation and local accountability as to question the applicability of Lipsky's model. The findings are based on the literature and a small survey undertaken by the author. © 2007 BELMAS.

A high sensitivity long period grating Mach-Zehnder refractometer

A refractive index sensing system has been demonstrated, which is based upon an in-line fibre long period grating Mach-Zehnder interferometer with a heterodyne interrogation technique. This sensing system has comparable accuracy to laboratory-based techniques used in industry such as high performance liquid chromatography and UV spectroscopy. The advantage of this system is that measurements can be made in-situ for applications in continuous process control. Compared to other refractive index sensing schemes using LPGs, this approach has two main advantages. Firstly, the system relies on a simple optical interrogation system and therefore has the real potential for being low cost, and secondly, so far as we are aware it provides the highest refractive index resolution reported for any fibre LPG device.

A multi-modular second life hybrid battery energy storage system for utility grid applications

The modern grid system or the smart grid is likely to be populated with multiple distributed energy sources, e.g. wind power, PV power, Plug-in Electric Vehicle (PEV). It will also include a variety of linear and nonlinear loads. The intermittent nature of renewable energies like PV, wind turbine and increased penetration of Electric Vehicle (EV) makes the stable operation of utility grid system challenging. In order to ensure a stable operation of the utility grid system and to support smart grid functionalities such as, fault ride-through, frequency response, reactive power support, and mitigation of power quality issues, an energy storage system (ESS) could play an important role. A fast acting bidirectional energy storage system which can rapidly provide and absorb power and/or VARs for a sufficient time is a potentially valuable tool to support this functionality. Battery energy storage systems (BESS) are one of a range suitable energy storage system because it can provide and absorb power for sufficient time as well as able to respond reasonably fast. Conventional BESS already exist on the grid system are made up primarily of new batteries. The cost of these batteries can be high which makes most BESS an expensive solution. In order to assist moving towards a low carbon economy and to reduce battery cost this work aims to research the opportunities for the re-use of batteries after their primary use in low and ultra-low carbon vehicles (EV/HEV) on the electricity grid system. This research aims to develop a new generation of second life battery energy storage systems (SLBESS) which could interface to the low/medium voltage network to provide necessary grid support in a reliable and in cost-effective manner. The reliability/performance of these batteries is not clear, but is almost certainly worse than a new battery. Manufacturers indicate that a mixture of gradual degradation and sudden failure are both possible and failure mechanisms are likely to be related to how hard the batteries were driven inside the vehicle. There are several figures from a number of sources including the DECC (Department of Energy and Climate Control) and Arup and Cenex reports indicate anything from 70,000 to 2.6 million electric and hybrid vehicles on the road by 2020. Once the vehicle battery has degraded to around 70-80% of its capacity it is considered to be at the end of its first life application. This leaves capacity available for a second life at a much cheaper cost than a new BESS Assuming a battery capability of around 5-18kWhr (MHEV 5kWh - BEV 18kWh battery) and approximate 10 year life span, this equates to a projection of battery storage capability available for second life of >1GWhrs by 2025. Moreover, each vehicle manufacturer has different specifications for battery chemistry, number and arrangement of battery cells, capacity, voltage, size etc. To enable research and investment in this area and to maximize the remaining life of these batteries, one of the design challenges is to combine these hybrid batteries into a grid-tie converter where their different performance characteristics, and parameter variation can be catered for and a hot swapping mechanism is available so that as a battery ends it second life, it can be replaced without affecting the overall system operation. This integration of either single types of batteries with vastly different performance capability or a hybrid battery system to a grid-tie 3 energy storage system is different to currently existing work on battery energy storage systems (BESS) which deals with a single type of battery with common characteristics. This thesis addresses and solves the power electronic design challenges in integrating second life hybrid batteries into a grid-tie energy storage unit for the first time. This study details a suitable multi-modular power electronic converter and its various switching strategies which can integrate widely different batteries to a grid-tie inverter irrespective of their characteristics, voltage levels and reliability. The proposed converter provides a high efficiency, enhanced control flexibility and has the capability to operate in different operational modes from the input to output. Designing an appropriate control system for this kind of hybrid battery storage system is also important because of the variation of battery types, differences in characteristics and different levels of degradations. This thesis proposes a generalised distributed power sharing strategy based on weighting function aims to optimally use a set of hybrid batteries according to their relative characteristics while providing the necessary grid support by distributing the power between the batteries. The strategy is adaptive in nature and varies as the individual battery characteristics change in real time as a result of degradation for example. A suitable bidirectional distributed control strategy or a module independent control technique has been developed corresponding to each mode of operation of the proposed modular converter. Stability is an important consideration in control of all power converters and as such this thesis investigates the control stability of the multi-modular converter in detailed. Many controllers use PI/PID based techniques with fixed control parameters. However, this is not found to be suitable from a stability point-of-view. Issues of control stability using this controller type under one of the operating modes has led to the development of an alternative adaptive and nonlinear Lyapunov based control for the modular power converter. Finally, a detailed simulation and experimental validation of the proposed power converter operation, power sharing strategy, proposed control structures and control stability issue have been undertaken using a grid connected laboratory based multi-modular hybrid battery energy storage system prototype. The experimental validation has demonstrated the feasibility of this new energy storage system operation for use in future grid applications.

A Didactic Model of Computer Supported Education in Higher Mathematics

Report published in the Proceedings of the National Conference on "Education and Research in the Information Society", Plovdiv, May, 2016

Implications of a theoretical framework on stress and burnout for the development of graduate nursing education curricula

This study had two purposes: (a) to develop a theoretical framework integrating and synthesizing findings of prior research regarding stress and burnout among critical care nurses (CCRNs), and (b) to validate the theoretical framework with an empirical study to assure a theory/research based teaching-learning process for graduate courses preparing nursing clinical specialists and administrators.^ The methods used to test the theoretical framework included: (a) adopting instruments with reported validity, (b) conducting a pilot study, (c) revising instruments using results of the pilot study and following concurrence of a panel of experts, and (d) establishing correlations within predetermined parameters. The reliability of the tool was determined through the use of Cronbach's Alpha Coefficient with a resulting range from.68 to.88 for all measures.^ The findings supported all the research hypotheses. Correlations were established at r =.23 for statistically significant alphas at the.01 level and r =.16 for alphas.05. The conclusions indicated three areas of strong correlation among the theoretical variables: (a) work environment stressor antecedents and specific stressor events were correlated significantly with subjective work stress and burnout; (b) subjective work stress (perceived work related stress) was a function of the work environment stressor antecedents and specific stressor events, and (c) emotional exhaustion, the first phase of burnout, was confirmed to be related to stressor antecedents and specific stressor events. This dimension was found to be a function of the work environment stressor antecedents, modified by the individual characteristics of work and non-work related social support, non-work daily stress, and the number of hours worked per week. The implications of the study for nursing graduate curricula, nursing practice and nursing education were discussed. Recommendations for further research were enumerated. ^

Headspace analysis of smokeless powders: Development of mass calibration methods using microdrop printing for chromatographic and ion mobility spectrometric detection

Smokeless powder additives are usually detected by their extraction from post-blast residues or unburned powder particles followed by analysis using chromatographic techniques. This work presents the first comprehensive study of the detection of the volatile and semi-volatile additives of smokeless powders using solid phase microextraction (SPME) as a sampling and pre-concentration technique. Seventy smokeless powders were studied using laboratory based chromatography techniques and a field deployable ion mobility spectrometer (IMS). The detection of diphenylamine, ethyl and methyl centralite, 2,4-dinitrotoluene, diethyl and dibutyl phthalate by IMS to associate the presence of these compounds to smokeless powders is also reported for the first time. A previously reported SPME-IMS analytical approach facilitates rapid sub-nanogram detection of the vapor phase components of smokeless powders. A mass calibration procedure for the analytical techniques used in this study was developed. Precise and accurate mass delivery of analytes in picoliter volumes was achieved using a drop-on-demand inkjet printing method. Absolute mass detection limits determined using this method for the various analytes of interest ranged between 0.03–0.8 ng for the GC-MS and between 0.03–2 ng for the IMS. Mass response graphs generated for different detection techniques help in the determination of mass extracted from the headspace of each smokeless powder. The analyte mass present in the vapor phase was sufficient for a SPME fiber to extract most analytes at amounts above the detection limits of both chromatographic techniques and the ion mobility spectrometer. Analysis of the large number of smokeless powders revealed that diphenylamine was present in the headspace of 96% of the powders. Ethyl centralite was detected in 47% of the powders and 8% of the powders had methyl centralite available for detection from the headspace sampling of the powders by SPME. Nitroglycerin was the dominant peak present in the headspace of the double-based powders. 2,4-dinitrotoluene which is another important headspace component was detected in 44% of the powders. The powders therefore have more than one headspace component and the detection of a combination of these compounds is achievable by SPME-IMS leading to an association to the presence of smokeless powders.

Hybrid Power System Intelligent Operation and Protection Involving Plug-in Electric Vehicles

Two key solutions to reduce the greenhouse gas emissions and increase the overall energy efficiency are to maximize the utilization of renewable energy resources (RERs) to generate energy for load consumption and to shift to low or zero emission plug-in electric vehicles (PEVs) for transportation. The present U.S. aging and overburdened power grid infrastructure is under a tremendous pressure to handle the issues involved in penetration of RERS and PEVs. The future power grid should be designed with for the effective utilization of distributed RERs and distributed generations to intelligently respond to varying customer demand including PEVs with high level of security, stability and reliability. This dissertation develops and verifies such a hybrid AC-DC power system. The system will operate in a distributed manner incorporating multiple components in both AC and DC styles and work in both grid-connected and islanding modes. The verification was performed on a laboratory-based hybrid AC-DC power system testbed as hardware/software platform. In this system, RERs emulators together with their maximum power point tracking technology and power electronics converters were designed to test different energy harvesting algorithms. The Energy storage devices including lithium-ion batteries and ultra-capacitors were used to optimize the performance of the hybrid power system. A lithium-ion battery smart energy management system with thermal and state of charge self-balancing was proposed to protect the energy storage system. A grid connected DC PEVs parking garage emulator, with five lithium-ion batteries was also designed with the smart charging functions that can emulate the future vehicle-to-grid (V2G), vehicle-to-vehicle (V2V) and vehicle-to-house (V2H) services. This includes grid voltage and frequency regulations, spinning reserves, micro grid islanding detection and energy resource support. The results show successful integration of the developed techniques for control and energy management of future hybrid AC-DC power systems with high penetration of RERs and PEVs.

Development of hardware in the loop real-time control techniques for hybrid power systems involving distributed demands and sustainable energy sources

The future power grid will effectively utilize renewable energy resources and distributed generation to respond to energy demand while incorporating information technology and communication infrastructure for their optimum operation. This dissertation contributes to the development of real-time techniques, for wide-area monitoring and secure real-time control and operation of hybrid power systems. ^ To handle the increased level of real-time data exchange, this dissertation develops a supervisory control and data acquisition (SCADA) system that is equipped with a state estimation scheme from the real-time data. This system is verified on a specially developed laboratory-based test bed facility, as a hardware and software platform, to emulate the actual scenarios of a real hybrid power system with the highest level of similarities and capabilities to practical utility systems. It includes phasor measurements at hundreds of measurement points on the system. These measurements were obtained from especially developed laboratory based Phasor Measurement Unit (PMU) that is utilized in addition to existing commercially based PMU’s. The developed PMU was used in conjunction with the interconnected system along with the commercial PMU’s. The tested studies included a new technique for detecting the partially islanded micro grids in addition to several real-time techniques for synchronization and parameter identifications of hybrid systems. ^ Moreover, due to numerous integration of renewable energy resources through DC microgrids, this dissertation performs several practical cases for improvement of interoperability of such systems. Moreover, increased number of small and dispersed generating stations and their need to connect fast and properly into the AC grids, urged this work to explore the challenges that arise in synchronization of generators to the grid and through introduction of a Dynamic Brake system to improve the process of connecting distributed generators to the power grid.^ Real time operation and control requires data communication security. A research effort in this dissertation was developed based on Trusted Sensing Base (TSB) process for data communication security. The innovative TSB approach improves the security aspect of the power grid as a cyber-physical system. It is based on available GPS synchronization technology and provides protection against confidentiality attacks in critical power system infrastructures. ^

Headspace Analysis of Smokeless Powders: Development of Mass Calibration Methods using Microdrop Printing for Chromatographic and Ion Mobility Spectrometric Detection

Smokeless powder additives are usually detected by their extraction from post-blast residues or unburned powder particles followed by analysis using chromatographic techniques. This work presents the first comprehensive study of the detection of the volatile and semi-volatile additives of smokeless powders using solid phase microextraction (SPME) as a sampling and pre-concentration technique. Seventy smokeless powders were studied using laboratory based chromatography techniques and a field deployable ion mobility spectrometer (IMS). The detection of diphenylamine, ethyl and methyl centralite, 2,4-dinitrotoluene, diethyl and dibutyl phthalate by IMS to associate the presence of these compounds to smokeless powders is also reported for the first time. A previously reported SPME-IMS analytical approach facilitates rapid sub-nanogram detection of the vapor phase components of smokeless powders. A mass calibration procedure for the analytical techniques used in this study was developed. Precise and accurate mass delivery of analytes in picoliter volumes was achieved using a drop-on-demand inkjet printing method. Absolute mass detection limits determined using this method for the various analytes of interest ranged between 0.03 - 0.8 ng for the GC-MS and between 0.03 - 2 ng for the IMS. Mass response graphs generated for different detection techniques help in the determination of mass extracted from the headspace of each smokeless powder. The analyte mass present in the vapor phase was sufficient for a SPME fiber to extract most analytes at amounts above the detection limits of both chromatographic techniques and the ion mobility spectrometer. Analysis of the large number of smokeless powders revealed that diphenylamine was present in the headspace of 96% of the powders. Ethyl centralite was detected in 47% of the powders and 8% of the powders had methyl centralite available for detection from the headspace sampling of the powders by SPME. Nitroglycerin was the dominant peak present in the headspace of the double-based powders. 2,4-dinitrotoluene which is another important headspace component was detected in 44% of the powders. The powders therefore have more than one headspace component and the detection of a combination of these compounds is achievable by SPME-IMS leading to an association to the presence of smokeless powders.

Echinometra sea urchins acclimatised to elevated pCO2 at volcanic vents outperform those under present-day pCO2 conditions

Rising atmospheric CO2 concentrations will significantly reduce ocean pH during the 21st century (ocean acidification, OA). This may hamper calcification in marine organisms such as corals and echinoderms, as shown in many laboratory-based experiments. Sea urchins are considered highly vulnerable to OA. We studied an Echinometra species on natural volcanic CO2 vents in Papua New Guinea, where they are CO2-acclimatized and also subjected to secondary ecological changes from elevated CO2. Near the vent site, the urchins experienced large daily variations in pH (> 1 unit) and pCO2 (> 2000 ppm) and average pH values (pHT 7.73) much below those expected under the most pessimistic future emission scenarios. Growth was measured over a 17-month period using tetracycline tagging of the calcareous feeding lanterns. Average-sized urchins grew more than twice as fast at the vent compared with those at an adjacent control site, and assumed larger sizes at the vent compared to the control site and two other sites at another reef near-by. A small reduction in gonad weight was detected at the vents, but no differences in mortality, respiration, or degree of test calcification were detected between urchins from vent and control populations. Thus, urchins did not only persist but actually 'thrived' under extreme CO2 conditions. We suggest an ecological basis for this response: increased algal productivity under increased pCO2 provided more food at the vent, resulting in higher growth rates. The wider implication of our observation is that laboratory studies on non-acclimatized specimens, which typically do not consider ecological changes, can lead to erroneous conclusions on responses to global change.

Repercussão da integração de conteúdos das disciplinas nos trabalhos finais de graduação de CAU-UFRN (2003 a 2010)

The changes in the teaching of Architecture in Brazilian Universities, from the 1990s onwards, with the upgrading of the Architecture project as an object of research and scientific knowledge and more specifically, the adoption by the Architecture and Urbanism Course (CAU) from the Federal University of Rio Grande do Norte (UFRN) of the principle of content integration of the disciplines, aroused the interest in research on issues related to the Design process and the teaching of design in this context. After 20 years of its implementation and recognized as being a major step forward in teaching the teaching/learning process, the integration is the central focus of this research, which will seek to identify changes in the teaching design and its refutation in projects developed by students at the end of their course. In general, it is understood that the need to integrate knowledge from diverse areas of Architect’s professional activity, who seeks through an exercise of summary, identify solutions to the issues involved in a project. On the assumption that the integration of content of disciplines fosters the teaching/learning of Architecture project, which can be evident in the Final Course Assignment (FCA), it becomes necessary to understand, in the light of theories of education, such as the principles of curriculum organization, such as interdisciplinarity and multidisciplinarity, transdisciplinarity and transversality are related to the term integration, is more understood and disseminated among the professors of the Architecture courses. The object of this study is consequently the relationship between the integration of subject content and Architecture projects developed by students from CAU-UFRN, in the context of Final Graduation projects (FCAs) completed in the period of duration of the Teaching Project A5-from 2003. The study has the main objective of investigating to what extent the integration of disciplinary content affects the development of the Final Assignment of UFRN, from the analysis of drawings and texts of the projects of the learners and the testimonies of teachers and undergraduate students. From a methodological point of view, the research “Architecture, Project and Knowledge Production: Academic Production – FCAs, Thesis and dissertations in PA/Brazil” carried out by the PROJETAR/UFRN team has been adopted as the basis for the construction of the analytical instruments. In order to identify aspects of their experience by various actors which were not recorded in FCA, electronic forms were applied between teachers and students, through the internet. The integration of subject content based Teaching Project of CAU-UFRN institutionalises the interdisciplinarity, organizing the curriculum by thematic semesters, in which the disciplines work the same focus and at the same site. The integrated work which derives from there tries to articulate the content of each discipline of the period and represents a general practice and has been evaluated by teachers and students, and considered as a facilitator of the teaching/learning process. The analysis of the data collected from the textual content and graphic of the sample of FCAs of CAU-UFRN suggests that the content of the various areas of knowledge are assimilated by the student and used as a resource for the design and development of Architecture projects. In other words, there is in the end product of the students record of the integration of content, whether in speech or in drawing, reaffirming the importance of the convergence of various knowledge in the Architectonic project. However, the integration of content from the point of view of their articulation and operationalization, which involves teachers and students in the same period, has as a condition sine qua non for the success of this educational principle, the provision of these to work as part of a team, for the dialogic practice, which creates areas of intersection not only between disciplines, but between the knowledge of each of the participants.

Assessment of Two Diabetes Point-of-Care Analyzers Measuring Hemoglobin A1c in the Peruvian Amazon

Aims: Measurement of glycated hemoglobin (HbA1c) is an important indicator of glucose control over time. Point-of-care (POC) devices allow for rapid and convenient measurement of HbA1c, greatly facilitating diabetes care. We assessed two POC analyzers in the Peruvian Amazon where laboratory-based HbA1c testing is not available.

Methods: Venous blood samples were collected from 203 individuals from six different Amazonian communities with a wide range of HbA1c, 4.4-9.0% (25-75 mmol/mol). The results of the Afinion AS100 and the DCA Vantage POC analyzers were compared to a central laboratory using the Premier Hb9210 high-performance liquid chromatography (HPLC) method. Imprecision was assessed by performing 14 successive tests of a single blood sample.

Results: The correlation coefficient r for POC and HPLC results was 0.92 for the Afinion and 0.93 for the DCA Vantage. The Afinion generated higher HbA1c results than the HPLC (mean difference = +0.56% [+6 mmol/mol]; p < 0.001), as did the DCA Vantage (mean difference = +0.32% [4 mmol/mol]). The bias observed between POC and HPLC did not vary by HbA1c level for the DCA Vantage (p = 0.190), but it did for the Afinion (p < 0.001). Imprecision results were: CV = 1.75% for the Afinion, CV = 4.01% for the DCA Vantage. Sensitivity was 100% for both devices, specificity was 48.3% for the Afinion and 85.1% for the DCA Vantage, positive predictive value (PPV) was 14.4% for the Afinion and 34.9% for the DCA Vantage, and negative predictive value (NPV) for both devices was 100%. The area under the receiver operating characteristic (ROC) curve was 0.966 for the Afinion and 0.982 for the DCA Vantage. Agreement between HPLC and POC in classifying diabetes and prediabetes status was slight for the Afinion (Kappa = 0.12) and significantly different (McNemar’s statistic = 89; p < 0.001), and moderate for the DCA Vantage (Kappa = 0.45) and significantly different (McNemar’s statistic = 28; p < 0.001).

Conclusions: Despite significant variation of HbA1c results between the Afinion and DCA Vantage analyzers compared to HPLC, we conclude that both analyzers should be considered in health clinics in the Peruvian Amazon for therapeutic adjustments if healthcare workers are aware of the differences relative to testing in a clinical laboratory. However, imprecision and bias were not low enough to recommend either device for screening purposes, and the local prevalence of anemia and malaria may interfere with diagnostic determinations for a substantial portion of the population.

Host genotype and age shape the leaf and root microbiomes of a wild perennial plant.

Bacteria living on and in leaves and roots influence many aspects of plant health, so the extent of a plant's genetic control over its microbiota is of great interest to crop breeders and evolutionary biologists. Laboratory-based studies, because they poorly simulate true environmental heterogeneity, may misestimate or totally miss the influence of certain host genes on the microbiome. Here we report a large-scale field experiment to disentangle the effects of genotype, environment, age and year of harvest on bacterial communities associated with leaves and roots of Boechera stricta (Brassicaceae), a perennial wild mustard. Host genetic control of the microbiome is evident in leaves but not roots, and varies substantially among sites. Microbiome composition also shifts as plants age. Furthermore, a large proportion of leaf bacterial groups are shared with roots, suggesting inoculation from soil. Our results demonstrate how genotype-by-environment interactions contribute to the complexity of microbiome assembly in natural environments.

Stable oxygen and carbon isotopic composition of foraminifera and sea water from the Arctic Ocean

O18/O16 data on a depth profile of water samples from the Arctic Ocean reveal that near surface water is depleted in O18 by about 4 per mil, but water at depths greater than 350 meters reaches near normal open ocean water composition. The O18 profile very closely follows the salinity profile, with deltaO18 changing by about 0.8 per mil per 1 per mil salinity change. The results of deltaO18 measurements on the pelagic species Globigerina pachyderma from a composite core show that the deltaO18 value has not changed since the latter part of the last glacial period. This constancy we take to indicate that the temperature and the deltaO18 value of the water in which these foraminifera grew have not changed significantly since that time. Such a conclusion seems to imply that the present ice coverage in the Arctic Ocean has remained unchanged during the last 25,000 years. However, the deltaO18 value of benthonic foraminifera shows a shift of 1.2 per mil between the end of the last glacial period and the present warm period. This shift is consistent with the idea that the deep water mass of the Arctic Ocean is formed outside the Arctic basin. The information on the deltaO18 value of the benthonic foraminifera from the top of the core was used in conjunction with the data on deltaO18 and temperature of the bottom water to establish the constant in the empirical equation relating deltaO18 values to temperature for the preparation procedure used in our laboratory. Based on this calibration, the data confirm A. W. H. Bé's contention (personal communication, 1960) that G. pachyderma incorporates about one-half of its CaCO3 below 300 meters.

The design studio as liminal space

The context of this research focuses on the efficacy of design studio as a form of teaching and learning. The established model of project-based teaching makes simple parallels between studio and professional practice. However, through comparison of the discourses it is clear that they are of different character. The protocols of the tutorial tradition can act to position the tutor as a defender of the knowledge community rather than a discourse guide for the student. The question arises as to what constitutes the core knowledge that would enable better self-directed study. Rather than focus on key knowledge, there has been an attempt in other fields to agree and share ‘threshold concepts’ within disciplinary knowledge. Meyer and Land describe threshold concepts as representing “a transformed way of understanding, or interpreting or viewing something without which the learner cannot progress [1]. The tutor’s role should be to assist in transforming student’s understanding through the mastery of the ‘troublesome knowledge’ that threshold concepts may embody. Teaching and learning environments under such approaches have been described as ‘liminal’: holding the learner in an ‘in-between’ state new understanding may be difficult and involve identity shifts. Research on the consequence of pressures on facilities and studio space concur, and indicate that studio spaces can be much better used in assisting the path of learning [2]. Through an overview map of threshold concepts, the opportunities for blended learning in supporting student learning in the liminal space of the design studio become much clearer [3] Design studio needs to be recontextualised within the discourse of higher education scholarship, based on a clarified curriculum built from an understanding of what constitutes its threshold concepts. The studio needs to be reconsidered as a space quite unlike that of the practitioner, a liminal space. 1. Meyer, J.H.F. and R. Land, Threshold concepts and troublesome knowledge. Overcoming Barriers to Student Learning: Threshold concepts and troublesome knowledge., 2006: p. 19. 2. Cai, H. and S. Khan, The Common First Year Studio in a Hot-desking Age: An Explorative Study on the Studio Environment and Learning. Journal for Education in the Built Environment 2010. 5(2): p. 39-64. 3. Pektas, S.T., The Blended Design Studio: An Appraisal of New Delivery Modes in Design Education. Procedia - Social and Behavioral Sciences, 2012. 51(0): p. 692-697.