THE IMPLICATIONS OF A PSYCHOEDUCATION GROUP ON THE EVERYDAY LIVES OF INDIVIDUALS WITH BIPOLAR AFFECTIVE DISORDER

There is growing evidence that the course of Bipolar Affective Disorder (BAD) can be altered by psychotherapeutic approaches, such as Psychoeducation. Therefore, this study was performed with the objective of identifying the implications of a Psychoeducation group on the everyday lives of individuals with BAD. To do this, the authors chose to perform a qualitative case study. Participants included twelve individuals with BAD who had attended at least six meetings of the Psychoeducation Group held at the Sao Jose do Rio Preto Faculty of Medicine (FAMERP). Semi-structured interviews were performed, which were recorded and then transcribed and subjected to Thematic Analysis. The present study showed that the referred group experience promoted the individuals' knowledge acquisition; their awareness regarding the disease and adherence to treatment; their making positive changes in life; the possibility of helping other patients to benefit from the knowledge learned in the group; and their awareness regarding other realities and coping strategies, obtained by exchanging experiences with other participants.

Central catheter dressing in a simulator: the effects of tutor's assistance or self-learning tutorial

Aims: to compare the performance of undergraduate students concerning semi-implanted central venous catheter dressing in a simulator, with the assistance of a tutor or of a self-learning tutorial. Method: Randomized controlled trial. The sample consisted of 35 undergraduate nursing students, who were divided into two groups after attending an open dialogue presentation class and watching a video. One group undertook the procedure practice with a tutor and the other with the assistance of a self-learning tutorial. Results: in relation to cognitive knowledge, the two groups had lower performance in the pre-test than in the post-test. The group that received assistance from a tutor performed better in the practical assessment. Conclusion: the simulation undertaken with the assistance of a tutor showed to be the most effective learning strategy when compared to the simulation using a self-learning tutorial. Advances in nursing simulation technology are of upmost importance and the role of the tutor in the learning process should be highlighted, taking into consideration the role this professional plays in knowledge acquisition and in the development of critical-reflexive thoughts and attitudes. (ClinicalTrials.gov Identifier: NCT 01614314).

Intelligence systems methodology: a systemic approach to the organizational intelligence function

Organizational intelligence can be seen as a function of the viable structure of an organization. With the integration of the Viable System Model and Soft Systems Methodology (systemic approaches of organizational management) focused on the role of the intelligence function, it is possible to elaborate a model of action with a structured methodology to prospect, select, treat and distribute information to the entire organization that improves the efficacy and efficiency of all processes. This combination of methodologies is called Intelligence Systems Methodology (ISM) whose assumptions and dynamics are delimited in this paper. The ISM is composed of two simultaneous activities: the Active Environmental Mapping and the Stimulated Action Cycle. The elaboration of the formal ISM description opens opportunities for applications of the methodology on real situations, offering a new path for this specific issue of systems thinking: the intelligence systems. Knowledge Management Research & Practice (2012) 10, 141-152. doi:10.1057/kmrp.2011.44

Natural Language Checking with Program Checking Tools

Written text is an important component in the process of knowledge acquisition and communication. Poorly written text fails to deliver clear ideas to the reader no matter how revolutionary and ground-breaking these ideas are. Providing text with good writing style is essential to transfer ideas smoothly. While we have sophisticated tools to check for stylistic problems in program code, we do not apply the same techniques for written text. In this paper we present TextLint, a rule-based tool to check for common style errors in natural language. TextLint provides a structural model of written text and an extensible rule-based checking mechanism.

Social-Software-Portfolios im Einsatz

Die Dissertationsschrift widmet sich der Erforschung des Online-Lernens mittels Weblogs unter Anwendung der E-Portfolio Methode als einer seit mehreren Jahren verstärkt aufkommenden Lern- und Präsentationsform im Bildungskontext. Über mehrere Lehrveranstaltungen des Studiengangs "Angewandte Medien- und Kommunikationswissenschaft" an der Technischen Universität Ilmenau hinweg wurden drei Fallstudien gebildet. Innerhalb dieser wurde das Führen von eigenen E-Portfolio Blogs durch Studierende über einen Zeitraum von etwa drei Jahren evaluiert. Als Evaluationsziel wurde anhand spezifischer Fragestellungen ermittelt, wie das damit einhergehende selbstgesteuert-konnektive Lernen zu entsprechendem Erfolg führen kann. Hierbei wurde insbesondere die Teildimension Medienkompetenz im Spannungsfeld von Lernaktivität, Wissenserwerb und Informations-/Wissensmanagement betrachtet sowie weitere intervenierende Variablen, wie zum Beispiel Aufwand oder Akzeptanz, berücksichtigt. Inhaltlich wurden zunächst begriffliche Grundlagen dargestellt, die Nutzung von E-Portfolios in Theorie und Praxis beschrieben, Medienkompetenz-Ansätze detailliert aufgezeigt sowie in den Kontext von E-Portfolios gebracht und schließlich eine umfangreiche Analyse des Forschungsstandes aufbereitet. Diese gingen mit Erkenntnissen aus einer qualitativen Vorstudie in Form von fünf leitfadengestützten Experteninterviews einher. Die darauf aufbauende Hauptstudie widmete sich anschließend der Erhebung und Auswertung quantitativer Daten anhand von Online-Befragungen mit den Studierenden zu fünf Zeitpunkten aus intra- und interindividueller Perspektive. Als markanteste empirische Erkenntnis der Arbeit kann festgehalten werden, dass es durch das selbstgesteuert-konnektive Lernen mit E-Portfolio Blogs zu einer nachhaltigen Förderung der Medienkompetenz kommt, die sich auch in signifikanten Zusammenhängen mit den anderen Teildimensionen und intervenierenden Variablen widerspiegelt. Darüber hinaus bieten sich aber auch Potenziale für eine steigende Lernaktivität, einen ansteigenden Wissenserwerb und ein verbessertes Informations-/Wissensmanagement, die es aber noch weiterführend zu erforschen gilt. Demgegenüber können allerdings der entstehende und kontinuierlich hohe Aufwand sowie die erforderliche (Eigen-) Motivation als entscheidende Herausforderungen dieser Lernmethode identifiziert werden.

Semantic Methods for Intelligent Distributed Design Environments

Continuous advancements in technology have led to increasingly comprehensive and distributed product development processes while in pursuit of improved products at reduced costs. Information associated with these products is ever changing, and structured frameworks have become integral to managing such fluid information. Ontologies and the Semantic Web have emerged as key alternatives for capturing product knowledge in both a human-readable and computable manner. The primary and conclusive focus of this research is to characterize relationships formed within methodically developed distributed design knowledge frameworks to ultimately provide a pervasive real-time awareness in distributed design processes. Utilizing formal logics in the form of the Semantic Web’s OWL and SWRL, causal relationships are expressed to guide and facilitate knowledge acquisition as well as identify contradictions between knowledge in a knowledge base. To improve the efficiency during both the development and operational phases of these “intelligent” frameworks, a semantic relatedness algorithm is designed specifically to identify and rank underlying relationships within product development processes. After reviewing several semantic relatedness measures, three techniques, including a novel meronomic technique, are combined to create AIERO, the Algorithm for Identifying Engineering Relationships in Ontologies. In determining its applicability and accuracy, AIERO was applied to three separate, independently developed ontologies. The results indicate AIERO is capable of consistently returning relatedness values one would intuitively expect. To assess the effectiveness of AIERO in exposing underlying causal relationships across product development platforms, a case study involving the development of an industry-inspired printed circuit board (PCB) is presented. After instantiating the PCB knowledge base and developing an initial set of rules, FIDOE, the Framework for Intelligent Distributed Ontologies in Engineering, was employed to identify additional causal relationships through extensional relatedness measurements. In a conclusive PCB redesign, the resulting “intelligent” framework demonstrates its ability to pass values between instances, identify inconsistencies amongst instantiated knowledge, and identify conflicting values within product development frameworks. The results highlight how the introduced semantic methods can enhance the current knowledge acquisition, knowledge management, and knowledge validation capabilities of traditional knowledge bases.

Choosing and Maintaining Programs for Sex Education in Schools: The CHAMPSS Model

Background: Despite effective solutions to reduce teen birth rates, Texas teen birth rates are among the highest in the nation. School districts can impact youth sexual behavior through implementation of evidence-based programs (EBPs); however, teen pregnancy prevention is a complex and controversial issue for school districts. Subsequently, very few districts in Texas implement EBPs for pregnancy prevention. Additionally, school districts receive little guidance on the process for finding, adopting, and implementing EBPs. Purpose: The purpose of this report is to present the CHoosing And Maintaining Programs for Sex education in Schools (CHAMPSS) Model, a practical and realistic framework to help districts find, adopt, and implement EBPs. Methods: Model development occurred in four phases using the core processes of Intervention Mapping: 1) knowledge acquisition, 2) knowledge engineering, 3) model representation, and 4) knowledge development. Results: The CHAMPSS Model provides seven steps, tailored for school-based settings, which encompass phases of assessment, preparation, implementation, and maintenance: Prioritize, Asses, Select, Approve, Prepare, Implement, and Maintain. Advocacy and eliciting support for adolescent sexual health are also core elements of the model. Conclusion: This systematic framework may help schools increase adoption, implementation, and maintenance for EBPs.

Generating multimedia presentations that summarize the behavior of dynamic systems using a model-based approach

This article describes a knowledge-based method for generating multimedia descriptions that summarize the behavior of dynamic systems. We designed this method for users who monitor the behavior of a dynamic system with the help of sensor networks and make decisions according to prefixed management goals. Our method generates presentations using different modes such as text in natural language, 2D graphics and 3D animations. The method uses a qualitative representation of the dynamic system based on hierarchies of components and causal influences. The method includes an abstraction generator that uses the system representation to find and aggregate relevant data at an appropriate level of abstraction. In addition, the method includes a hierarchical planner to generate a presentation using a model with dis- course patterns. Our method provides an efficient and flexible solution to generate concise and adapted multimedia presentations that summarize thousands of time series. It is general to be adapted to differ- ent dynamic systems with acceptable knowledge acquisition effort by reusing and adapting intuitive rep- resentations. We validated our method and evaluated its practical utility by developing several models for an application that worked in continuous real time operation for more than 1 year, summarizing sen- sor data of a national hydrologic information system in Spain.

Open Technologies for prototyping the Internet of Things

The worldwide "hyper-connection" of any object around us is the challenge that promises to cover the paradigm of the Internet of Things. If the Internet has colonized the daily life of more than 2000 million1 people around the globe, the Internet of Things faces of connecting more than 100000 million2 "things" by 2020. The underlying Internet of Things’ technologies are the cornerstone that promises to solve interrelated global problems such as exponential population growth, energy management in cities, and environmental sustainability in the average and long term. On the one hand, this Project has the goal of knowledge acquisition about prototyping technologies available in the market for the Internet of Things. On the other hand, the Project focuses on the development of a system for devices management within a Wireless Sensor and Actuator Network to offer some services accessible from the Internet. To accomplish the objectives, the Project will begin with a detailed analysis of various “open source” hardware platforms to encourage creative development of applications, and automatically extract information from the environment around them for transmission to external systems. In addition, web platforms that enable mass storage with the philosophy of the Internet of Things will be studied. The project will culminate in the proposal and specification of a service-oriented software architecture for embedded systems that allows communication between devices on the network, and the data transmission to external systems. Furthermore, it abstracts the complexities of hardware to application developers. RESUMEN. La “hiper-conexión” a nivel mundial de cualquier objeto que nos rodea es el desafío al que promete dar cobertura el paradigma de la Internet de las Cosas. Si la Internet ha colonizado el día a día de más de 2000 millones1 de personas en todo el planeta, la Internet de las Cosas plantea el reto de conectar a más de 100000 millones2 de “cosas” para el año 2020. Las tecnologías subyacentes de la Internet de las Cosas son la piedra angular que prometen dar solución a problemas globales interrelacionados como el crecimiento exponencial de la población, la gestión de la energía en las ciudades o la sostenibilidad del medioambiente a largo plazo. Este Proyecto Fin de Carrera tiene como principales objetivos por un lado, la adquisición de conocimientos acerca de las tecnologías para prototipos disponibles en el mercado para la Internet de las Cosas, y por otro lado el desarrollo de un sistema para la gestión de dispositivos de una red inalámbrica de sensores que ofrezcan unos servicios accesibles desde la Internet. Con el fin de abordar los objetivos marcados, el proyecto comenzará con un análisis detallado de varias plataformas hardware de tipo “open source” que estimulen el desarrollo creativo de aplicaciones y que permitan extraer de forma automática información del medio que les rodea para transmitirlo a sistemas externos para su posterior procesamiento. Por otro lado, se estudiarán plataformas web identificadas con la filosofía de la Internet de las Cosas que permitan el almacenamiento masivo de datos que diferentes plataformas hardware transfieren a través de la Internet. El Proyecto culminará con la propuesta y la especificación una arquitectura software orientada a servicios para sistemas empotrados que permita la comunicación entre los dispositivos de la red y la transmisión de datos a sistemas externos, así como facilitar el desarrollo de aplicaciones a los programadores mediante la abstracción de la complejidad del hardware.

Development and implementation of a virtual laboratory for training process improvement in the mechanics of continuous media

The project arises from the need to develop improved teaching methodologies in field of the mechanics of continuous media. The objective is to offer the student a learning process to acquire the necessary theoretical knowledge, cognitive skills and the responsibility and autonomy to professional development in this area. Traditionally the teaching of the concepts of these subjects was performed through lectures and laboratory practice. During these lessons the students attitude was usually passive, and therefore their effectiveness was poor. The proposed methodology has already been successfully employed in universities like University Bochum, Germany, University the South Australia and aims to improve the effectiveness of knowledge acquisition through use by the student of a virtual laboratory. This laboratory allows to adapt the curricula and learning techniques to the European Higher Education and improve current learning processes in the University School of Public Works Engineers -EUITOP- of the Technical University of Madrid -UPM-, due there are not laboratories in this specialization. The virtual space is created using a software platform built on OpenSim, manages 3D virtual worlds, and, language LSL -Linden Scripting Language-, which imprints specific powers to objects. The student or user can access this virtual world through their avatar -your character in the virtual world- and can perform practices within the space created for the purpose, at any time, just with computer with internet access and viewfinder. The virtual laboratory has three partitions. The virtual meeting rooms, where the avatar can interact with peers, solve problems and exchange existing documentation in the virtual library. The interactive game room, where the avatar is has to resolve a number of issues in time. And the video room where students can watch instructional videos and receive group lessons. Each audiovisual interactive element is accompanied by explanations framing it within the area of knowledge and enables students to begin to acquire a vocabulary and practice of the profession for which they are being formed. Plane elasticity concepts are introduced from the tension and compression testing of test pieces of steel and concrete. The behavior of reticulated and articulated structures is reinforced by some interactive games and concepts of tension, compression, local and global buckling will by tests to break articulated structures. Pure bending concepts, simple and composite torsion will be studied by observing a flexible specimen. Earthquake resistant design of buildings will be checked by a laboratory test video.

Data Mining with Enhanced Neural Networks-CMMSE

Abstract This paper presents a new method to extract knowledge from existing data sets, that is, to extract symbolic rules using the weights of an Artificial Neural Network. The method has been applied to a neural network with special architecture named Enhanced Neural Network (ENN). This architecture improves the results that have been obtained with multilayer perceptron (MLP). The relationship among the knowledge stored in the weights, the performance of the network and the new implemented algorithm to acquire rules from the weights is explained. The method itself gives a model to follow in the knowledge acquisition with ENN.

Is the polarity of content producers strongly influenced by the results of the event?

This paper presents an approach to compare two types of data, subjective data (Polarity of Pan American Games 2011 event by country) and objective data (the number of medals won by each participating country), based on the Pearson corre- lation. When dealing with events described by people, knowledge acquisition is difficult because their structure is heterogeneous and subjective. A first step towards knowing the polarity of the information provided by people consists in automatically classifying the posts into clusters according to their polarity. The authors carried out a set of experiments using a corpus that consists of 5600 posts extracted from 168 Internet resources related to a specific event: the 2011 Pan American games. The approach is based on four components: a crawler, a filter, a synthesizer and a polarity analyzer. The PanAmerican approach automatically classifies the polarity of the event into clusters with the following results: 588 positive, 336 neutral, and 76 negative. Our work found out that the polarity of the content produced was strongly influenced by the results of the event with a correlation of .74. Thus, it is possible to conclude that the polarity of content is strongly affected by the results of the event. Finally, the accuracy of the PanAmerican approach is: .87, .90, and .80 according to the precision of the three classes of polarity evaluated.

Análisis de los factores de influencia en la adopción de herramientas colaborativas basadas en software social. Aplicación a entornos empresariales

En las últimas dos décadas, se ha puesto de relieve la importancia de los procesos de adquisición y difusión del conocimiento dentro de las empresas, y por consiguiente el estudio de estos procesos y la implementación de tecnologías que los faciliten ha sido un tema que ha despertado un creciente interés en la comunidad científica. Con el fin de facilitar y optimizar la adquisición y la difusión del conocimiento, las organizaciones jerárquicas han evolucionado hacia una configuración más plana, con estructuras en red que resulten más ágiles, disminuyendo la dependencia de una autoridad centralizada, y constituyendo organizaciones orientadas a trabajar en equipo. Al mismo tiempo, se ha producido un rápido desarrollo de las herramientas de colaboración Web 2.0, tales como blogs y wikis. Estas herramientas de colaboración se caracterizan por una importante componente social, y pueden alcanzar todo su potencial cuando se despliegan en las estructuras organizacionales planas. La Web 2.0 aparece como un concepto enfrentado al conjunto de tecnologías que existían a finales de los 90s basadas en sitios web, y se basa en la participación de los propios usuarios. Empresas del Fortune 500 –HP, IBM, Xerox, Cisco– las adoptan de inmediato, aunque no hay unanimidad sobre su utilidad real ni sobre cómo medirla. Esto se debe en parte a que no se entienden bien los factores que llevan a los empleados a adoptarlas, lo que ha llevado a fracasos en la implantación debido a la existencia de algunas barreras. Dada esta situación, y ante las ventajas teóricas que tienen estas herramientas de colaboración Web 2.0 para las empresas, los directivos de éstas y la comunidad científica muestran un interés creciente en conocer la respuesta a la pregunta: ¿cuáles son los factores que contribuyen a que los empleados de las empresas adopten estas herramientas Web 2.0 para colaborar? La respuesta a esta pregunta es compleja ya que se trata de herramientas relativamente nuevas en el contexto empresarial mediante las cuales se puede llevar a cabo la gestión del conocimiento en lugar del manejo de la información. El planteamiento que se ha llevado a cabo en este trabajo para dar respuesta a esta pregunta es la aplicación de los modelos de adopción tecnológica, que se basan en las percepciones de los individuos sobre diferentes aspectos relacionados con el uso de la tecnología. Bajo este enfoque, este trabajo tiene como objetivo principal el estudio de los factores que influyen en la adopción de blogs y wikis en empresas, mediante un modelo predictivo, teórico y unificado, de adopción tecnológica, con un planteamiento holístico a partir de la literatura de los modelos de adopción tecnológica y de las particularidades que presentan las herramientas bajo estudio y en el contexto especifico. Este modelo teórico permitirá determinar aquellos factores que predicen la intención de uso de las herramientas y el uso real de las mismas. El trabajo de investigación científica se estructura en cinco partes: introducción al tema de investigación, desarrollo del marco teórico, diseño del trabajo de investigación, análisis empírico, y elaboración de conclusiones. Desde el punto de vista de la estructura de la memoria de la tesis, las cinco partes mencionadas se desarrollan de forma secuencial a lo largo de siete capítulos, correspondiendo la primera parte al capítulo 1, la segunda a los capítulos 2 y 3, la tercera parte a los capítulos 4 y 5, la cuarta parte al capítulo 6, y la quinta y última parte al capítulo 7. El contenido del capítulo 1 se centra en el planteamiento del problema de investigación así como en los objetivos, principal y secundarios, que se pretenden cumplir a lo largo del trabajo. Así mismo, se expondrá el concepto de colaboración y su encaje con las herramientas colaborativas Web 2.0 que se plantean en la investigación y una introducción a los modelos de adopción tecnológica. A continuación se expone la justificación de la investigación, los objetivos de la misma y el plan de trabajo para su elaboración. Una vez introducido el tema de investigación, en el capítulo 2 se lleva a cabo una revisión de la evolución de los principales modelos de adopción tecnológica existentes (IDT, TRA, SCT, TPB, DTPB, C-TAM-TPB, UTAUT, UTAUT2), dando cuenta de sus fundamentos y factores empleados. Sobre la base de los modelos de adopción tecnológica expuestos en el capítulo 2, en el capítulo 3 se estudian los factores que se han expuesto en el capítulo 2 pero adaptados al contexto de las herramientas colaborativas Web 2.0. Con el fin de facilitar la comprensión del modelo final, los factores se agrupan en cuatro tipos: tecnológicos, de control, socio-normativos y otros específicos de las herramientas colaborativas. En el capítulo 4 se lleva a cabo la relación de los factores que son más apropiados para estudiar la adopción de las herramientas colaborativas y se define un modelo que especifica las relaciones entre los diferentes factores. Estas relaciones finalmente se convertirán en hipótesis de trabajo, y que habrá que contrastar mediante el estudio empírico. A lo largo del capítulo 5 se especifican las características del trabajo empírico que se lleva a cabo para contrastar las hipótesis que se habían enunciado en el capítulo 4. La naturaleza de la investigación es de carácter social, de tipo exploratorio, y se basa en un estudio empírico cuantitativo cuyo análisis se llevará a cabo mediante técnicas de análisis multivariante. En este capítulo se describe la construcción de las escalas del instrumento de medida, la metodología de recogida de datos, y posteriormente se presenta un análisis detallado de la población muestral, así como la comprobación de la existencia o no del sesgo atribuible al método de medida, lo que se denomina sesgo de método común (en inglés, Common Method Bias). El contenido del capítulo 6 corresponde al análisis de resultados, aunque previamente se expone la técnica estadística empleada, PLS-SEM, como herramienta de análisis multivariante con capacidad de análisis predictivo, así como la metodología empleada para validar el modelo de medida y el modelo estructural, los requisitos que debe cumplir la muestra, y los umbrales de los parámetros considerados. En la segunda parte del capítulo 6 se lleva a cabo el análisis empírico de los datos correspondientes a las dos muestras, una para blogs y otra para wikis, con el fin de validar las hipótesis de investigación planteadas en el capítulo 4. Finalmente, en el capítulo 7 se revisa el grado de cumplimiento de los objetivos planteados en el capítulo 1 y se presentan las contribuciones teóricas, metodológicas y prácticas derivadas del trabajo realizado. A continuación se exponen las conclusiones generales y detalladas por cada grupo de factores, así como las recomendaciones prácticas que se pueden extraer para orientar la implantación de estas herramientas en situaciones reales. Como parte final del capítulo se incluyen las limitaciones del estudio y se sugiere una serie de posibles líneas de trabajo futuras de interés, junto con los resultados de investigación parciales que se han obtenido durante el tiempo que ha durado la investigación. ABSTRACT In the last two decades, the relevance of knowledge acquisition and dissemination processes has been highlighted and consequently, the study of these processes and the implementation of the technologies that make them possible has generated growing interest in the scientific community. In order to ease and optimize knowledge acquisition and dissemination, hierarchical organizations have evolved to a more horizontal configuration with more agile net structures, decreasing the dependence of a centralized authority, and building team-working oriented organizations. At the same time, Web 2.0 collaboration tools such as blogs and wikis have quickly developed. These collaboration tools are characterized by a strong social component and can reach their full potential when they are deployed in horizontal organization structures. Web 2.0, based on user participation, arises as a concept to challenge the existing technologies of the 90’s which were based on websites. Fortune 500 companies – HP, IBM, Xerox, Cisco- adopted the concept immediately even though there was no unanimity about its real usefulness or how it could be measured. This is partly due to the fact that the factors that make the drivers for employees to adopt these tools are not properly understood, consequently leading to implementation failure due to the existence of certain barriers. Given this situation, and faced with theoretical advantages that these Web 2.0 collaboration tools seem to have for companies, managers and the scientific community are showing an increasing interest in answering the following question: Which factors contribute to the decision of the employees of a company to adopt the Web 2.0 tools for collaborative purposes? The answer is complex since these tools are relatively new in business environments. These tools allow us to move from an information Management approach to Knowledge Management. In order to answer this question, the chosen approach involves the application of technology adoption models, all of them based on the individual’s perception of the different aspects related to technology usage. From this perspective, this thesis’ main objective is to study the factors influencing the adoption of blogs and wikis in a company. This is done by using a unified and theoretical predictive model of technological adoption with a holistic approach that is based on literature of technological adoption models and the particularities that these tools presented under study and in a specific context. This theoretical model will allow us to determine the factors that predict the intended use of these tools and their real usage. The scientific research is structured in five parts: Introduction to the research subject, development of the theoretical framework, research work design, empirical analysis and drawing the final conclusions. This thesis develops the five aforementioned parts sequentially thorough seven chapters; part one (chapter one), part two (chapters two and three), part three (chapters four and five), parte four (chapters six) and finally part five (chapter seven). The first chapter is focused on the research problem statement and the objectives of the thesis, intended to be reached during the project. Likewise, the concept of collaboration and its link with the Web 2.0 collaborative tools is discussed as well as an introduction to the technology adoption models. Finally we explain the planning to carry out the research and get the proposed results. After introducing the research topic, the second chapter carries out a review of the evolution of the main existing technology adoption models (IDT, TRA, SCT, TPB, DTPB, C-TAM-TPB, UTAUT, UTAUT2), highlighting its foundations and factors used. Based on technology adoption models set out in chapter 2, the third chapter deals with the factors which have been discussed previously in chapter 2, but adapted to the context of Web 2.0 collaborative tools under study, blogs and wikis. In order to better understand the final model, the factors are grouped into four types: technological factors, control factors, social-normative factors and other specific factors related to the collaborative tools. The first part of chapter 4 covers the analysis of the factors which are more relevant to study the adoption of collaborative tools, and the second part proceeds with the theoretical model which specifies the relationship between the different factors taken into consideration. These relationships will become specific hypotheses that will be tested by the empirical study. Throughout chapter 5 we cover the characteristics of the empirical study used to test the research hypotheses which were set out in chapter 4. The nature of research is social, exploratory, and it is based on a quantitative empirical study whose analysis is carried out using multivariate analysis techniques. The second part of this chapter includes the description of the scales of the measuring instrument; the methodology for data gathering, the detailed analysis of the sample, and finally the existence of bias attributable to the measurement method, the "Bias Common Method" is checked. The first part of chapter 6 corresponds to the analysis of results. The statistical technique employed (PLS-SEM) is previously explained as a tool of multivariate analysis, capable of carrying out predictive analysis, and as the appropriate methodology used to validate the model in a two-stages analysis, the measurement model and the structural model. Futhermore, it is necessary to check the requirements to be met by the sample and the thresholds of the parameters taken into account. In the second part of chapter 6 an empirical analysis of the data is performed for the two samples, one for blogs and the other for wikis, in order to validate the research hypothesis proposed in chapter 4. Finally, in chapter 7 the fulfillment level of the objectives raised in chapter 1 is reviewed and the theoretical, methodological and practical conclusions derived from the results of the study are presented. Next, we cover the general conclusions, detailing for each group of factors including practical recommendations that can be drawn to guide implementation of these tools in real situations in companies. As a final part of the chapter the limitations of the study are included and a number of potential future researches suggested, along with research partial results which have been obtained thorough the research.

Extracción de conocimientos de la diabetes tipo 1 utilizando la metodología de "Data Mining"

La diabetes mellitus es un trastorno en la metabolización de los carbohidratos, caracterizado por la nula o insuficiente segregación de insulina (hormona producida por el páncreas), como resultado del mal funcionamiento de la parte endocrina del páncreas, o de una creciente resistencia del organismo a esta hormona. Esto implica, que tras el proceso digestivo, los alimentos que ingerimos se transforman en otros compuestos químicos más pequeños mediante los tejidos exocrinos. La ausencia o poca efectividad de esta hormona polipéptida, no permite metabolizar los carbohidratos ingeridos provocando dos consecuencias: Aumento de la concentración de glucosa en sangre, ya que las células no pueden metabolizarla; consumo de ácidos grasos mediante el hígado, liberando cuerpos cetónicos para aportar la energía a las células. Esta situación expone al enfermo crónico, a una concentración de glucosa en sangre muy elevada, denominado hiperglucemia, la cual puede producir a medio o largo múltiples problemas médicos: oftalmológicos, renales, cardiovasculares, cerebrovasculares, neurológicos… La diabetes representa un gran problema de salud pública y es la enfermedad más común en los países desarrollados por varios factores como la obesidad, la vida sedentaria, que facilitan la aparición de esta enfermedad. Mediante el presente proyecto trabajaremos con los datos de experimentación clínica de pacientes con diabetes de tipo 1, enfermedad autoinmune en la que son destruidas las células beta del páncreas (productoras de insulina) resultando necesaria la administración de insulina exógena. Dicho esto, el paciente con diabetes tipo 1 deberá seguir un tratamiento con insulina administrada por la vía subcutánea, adaptado a sus necesidades metabólicas y a sus hábitos de vida. Para abordar esta situación de regulación del control metabólico del enfermo, mediante una terapia de insulina, no serviremos del proyecto “Páncreas Endocrino Artificial” (PEA), el cual consta de una bomba de infusión de insulina, un sensor continuo de glucosa, y un algoritmo de control en lazo cerrado. El objetivo principal del PEA es aportar al paciente precisión, eficacia y seguridad en cuanto a la normalización del control glucémico y reducción del riesgo de hipoglucemias. El PEA se instala mediante vía subcutánea, por lo que, el retardo introducido por la acción de la insulina, el retardo de la medida de glucosa, así como los errores introducidos por los sensores continuos de glucosa cuando, se descalibran dificultando el empleo de un algoritmo de control. Llegados a este punto debemos modelar la glucosa del paciente mediante sistemas predictivos. Un modelo, es todo aquel elemento que nos permita predecir el comportamiento de un sistema mediante la introducción de variables de entrada. De este modo lo que conseguimos, es una predicción de los estados futuros en los que se puede encontrar la glucosa del paciente, sirviéndonos de variables de entrada de insulina, ingesta y glucosa ya conocidas, por ser las sucedidas con anterioridad en el tiempo. Cuando empleamos el predictor de glucosa, utilizando parámetros obtenidos en tiempo real, el controlador es capaz de indicar el nivel futuro de la glucosa para la toma de decisones del controlador CL. Los predictores que se están empleando actualmente en el PEA no están funcionando correctamente por la cantidad de información y variables que debe de manejar. Data Mining, también referenciado como Descubrimiento del Conocimiento en Bases de Datos (Knowledge Discovery in Databases o KDD), ha sido definida como el proceso de extracción no trivial de información implícita, previamente desconocida y potencialmente útil. Todo ello, sirviéndonos las siguientes fases del proceso de extracción del conocimiento: selección de datos, pre-procesado, transformación, minería de datos, interpretación de los resultados, evaluación y obtención del conocimiento. Con todo este proceso buscamos generar un único modelo insulina glucosa que se ajuste de forma individual a cada paciente y sea capaz, al mismo tiempo, de predecir los estados futuros glucosa con cálculos en tiempo real, a través de unos parámetros introducidos. Este trabajo busca extraer la información contenida en una base de datos de pacientes diabéticos tipo 1 obtenidos a partir de la experimentación clínica. Para ello emplearemos técnicas de Data Mining. Para la consecución del objetivo implícito a este proyecto hemos procedido a implementar una interfaz gráfica que nos guía a través del proceso del KDD (con información gráfica y estadística) de cada punto del proceso. En lo que respecta a la parte de la minería de datos, nos hemos servido de la denominada herramienta de WEKA, en la que a través de Java controlamos todas sus funciones, para implementarlas por medio del programa creado. Otorgando finalmente, una mayor potencialidad al proyecto con la posibilidad de implementar el servicio de los dispositivos Android por la potencial capacidad de portar el código. Mediante estos dispositivos y lo expuesto en el proyecto se podrían implementar o incluso crear nuevas aplicaciones novedosas y muy útiles para este campo. Como conclusión del proyecto, y tras un exhaustivo análisis de los resultados obtenidos, podemos apreciar como logramos obtener el modelo insulina-glucosa de cada paciente. ABSTRACT. The diabetes mellitus is a metabolic disorder, characterized by the low or none insulin production (a hormone produced by the pancreas), as a result of the malfunctioning of the endocrine pancreas part or by an increasing resistance of the organism to this hormone. This implies that, after the digestive process, the food we consume is transformed into smaller chemical compounds, through the exocrine tissues. The absence or limited effectiveness of this polypeptide hormone, does not allow to metabolize the ingested carbohydrates provoking two consequences: Increase of the glucose concentration in blood, as the cells are unable to metabolize it; fatty acid intake through the liver, releasing ketone bodies to provide energy to the cells. This situation exposes the chronic patient to high blood glucose levels, named hyperglycemia, which may cause in the medium or long term multiple medical problems: ophthalmological, renal, cardiovascular, cerebrum-vascular, neurological … The diabetes represents a great public health problem and is the most common disease in the developed countries, by several factors such as the obesity or sedentary life, which facilitate the appearance of this disease. Through this project we will work with clinical experimentation data of patients with diabetes of type 1, autoimmune disease in which beta cells of the pancreas (producers of insulin) are destroyed resulting necessary the exogenous insulin administration. That said, the patient with diabetes type 1 will have to follow a treatment with insulin, administered by the subcutaneous route, adapted to his metabolic needs and to his life habits. To deal with this situation of metabolic control regulation of the patient, through an insulin therapy, we shall be using the “Endocrine Artificial Pancreas " (PEA), which consists of a bomb of insulin infusion, a constant glucose sensor, and a control algorithm in closed bow. The principal aim of the PEA is providing the patient precision, efficiency and safety regarding the normalization of the glycemic control and hypoglycemia risk reduction". The PEA establishes through subcutaneous route, consequently, the delay introduced by the insulin action, the delay of the glucose measure, as well as the mistakes introduced by the constant glucose sensors when, decalibrate, impede the employment of an algorithm of control. At this stage we must shape the patient glucose levels through predictive systems. A model is all that element or set of elements which will allow us to predict the behavior of a system by introducing input variables. Thus what we obtain, is a prediction of the future stages in which it is possible to find the patient glucose level, being served of input insulin, ingestion and glucose variables already known, for being the ones happened previously in the time. When we use the glucose predictor, using obtained real time parameters, the controller is capable of indicating the future level of the glucose for the decision capture CL controller. The predictors that are being used nowadays in the PEA are not working correctly for the amount of information and variables that it need to handle. Data Mining, also indexed as Knowledge Discovery in Databases or KDD, has been defined as the not trivial extraction process of implicit information, previously unknown and potentially useful. All this, using the following phases of the knowledge extraction process: selection of information, pre- processing, transformation, data mining, results interpretation, evaluation and knowledge acquisition. With all this process we seek to generate the unique insulin glucose model that adjusts individually and in a personalized way for each patient form and being capable, at the same time, of predicting the future conditions with real time calculations, across few input parameters. This project of end of grade seeks to extract the information contained in a database of type 1 diabetics patients, obtained from clinical experimentation. For it, we will use technologies of Data Mining. For the attainment of the aim implicit to this project we have proceeded to implement a graphical interface that will guide us across the process of the KDD (with graphical and statistical information) of every point of the process. Regarding the data mining part, we have been served by a tool called WEKA's tool called, in which across Java, we control all of its functions to implement them by means of the created program. Finally granting a higher potential to the project with the possibility of implementing the service for Android devices, porting the code. Through these devices and what has been exposed in the project they might help or even create new and very useful applications for this field. As a conclusion of the project, and after an exhaustive analysis of the obtained results, we can show how we achieve to obtain the insulin–glucose model for each patient.

Toward the ultimate synthesis/recognition system.

This paper predicts speech synthesis, speech recognition, and speaker recognition technology for the year 2001, and it describes the most important research problems to be solved in order to arrive at these ultimate synthesis and recognition systems. The problems for speech synthesis include natural and intelligible voice production, prosody control based on meaning, capability of controlling synthesized voice quality and choosing individual speaking style, multilingual and multidialectal synthesis, choice of application-oriented speaking styles, capability of adding emotion, and synthesis from concepts. The problems for speech recognition include robust recognition against speech variations, adaptation/normalization to variations due to environmental conditions and speakers, automatic knowledge acquisition for acoustic and linguistic modeling, spontaneous speech recognition, naturalness and ease of human-machine interaction, and recognition of emotion. The problems for speaker recognition are similar to those for speech recognition. The research topics related to all these techniques include the use of articulatory and perceptual constraints and evaluation methods for measuring the quality of technology and systems.