Emerging technologies for recovery of value-added components from olive leaves and their applications in food/feed industries

Olive leaves are the most abundant agricultural waste source rich in polyphenolics. Due to the numerous health benefits associated with these compounds, the interest in recovering polyphenols from olive leaves has increased in the scientific community over the last decade. Recent studies have focused on improved extraction techniques and processing methods that are most suited for agro-biological industries involved in the development of nutraceutical and functional products. The major problems in olive leaves processing include bitter taste and the low stability of various phenolic compounds. Oleuropein and hydroxytyrosol are the most important phenolic compounds extracted from olive leaves. The present review highlights the importance of olive leaves, their composition, preparation methods, major phenolic compounds, and commercial applications. This review article focuses on integrating studies on olive leaf extract (OLE) pertinent to nutrition, health, and beauty. The different board categories of delivery systems available for the encapsulation of OLE are given. These novel delivery systems could improve fortification, supplementation, and dietary diversification in food and pharmaceutical products.

Food skills confidence and household gatekeepers' dietary practices

INTRODUCTION: Household food gatekeepers have the potential to influence the food attitudes and behaviours of family members, as they are mainly responsible for food-related tasks in the home. The aim of this study was to determine the role of gatekeepers' confidence in food-related skills and nutrition knowledge on food practices in the home.

METHODS: An online survey was completed by 1059 Australian dietary gatekeepers selected from the Global Market Insite (GMI) research database. Participants responded to questions about food acquisition and preparation behaviours, the home eating environment, perceptions and attitudes towards food, and demographics. Two-step cluster analysis was used to identify groups based on confidence regarding food skills and nutrition knowledge. Chi-square tests and one-way ANOVAs were used to compare the groups on the dependent variables.

RESULTS: Three groups were identified: low confidence, moderate confidence and high confidence. Gatekeepers in the highest confidence group were significantly more likely to report lower body mass index (BMI), and indicate higher importance of fresh food products, vegetable prominence in meals, product information use, meal planning, perceived behavioural control and overall diet satisfaction. Gatekeepers in the lowest confidence group were significantly more likely to indicate more perceived barriers to healthy eating, report more time constraints and more impulse purchasing practices, and higher convenience ingredient use. Other smaller associations were also found.

CONCLUSION: Household food gatekeepers with high food skills confidence were more likely to engage in several healthy food practices, while those with low food skills confidence were more likely to engage in unhealthy food practices. Food education strategies aimed at building food-skills and nutrition knowledge will enable current and future gatekeepers to make healthier food decisions for themselves and for their families.

New dimeric supramolecular structure of mixed (phthalocyaninato)(porphyrinato)-europium(III) sandwiches : preparation and spectroscopic characteristics

The mixed double-decker Eu\[Pc(15C5)4](TPP) (1) was obtained by base-catalysed tetramerisation of 4,5-dicyanobenzo-15-crown-5 using the half-sandwich complex Eu(TPP)(acac) (acac = acetylacetonate), generated in situ, as the template. For comparative studies, the mixed triple-decker complexes Eu2\[Pc(15C5)4](TPP)2 (2) and Eu2\[Pc(15C5)4]2(TPP) (3) were also synthesised by the raise-by-one-story method. These mixed ring sandwich complexes were characterised by various spectroscopic methods. Up to four one-electron oxidations and two one-electron reductions were revealed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). As shown by electronic absorption and infrared spectroscopy, supramolecular dimers (SM1 and SM3) were formed from the corresponding double-decker 1 and triple-decker 3 in the presence of potassium ions in MeOH/CHCl3.

Efficient microwave hydrothermal preparation of nanocrystalline anatase TiO2 colloids

Titanium dioxide nanocrystals are an important commercial product used primarily in white pigments and abrasives, however, more recently the anatase form of TiO2 has become a major component in electrochemical and photoelectrochemical devices. An important property of titanium dioxide nanocrystals for electrical applications is the degree of crystallinity. Numerous preparation methods exist for the production of highly crystalline TiO2 particles. The majority of these processes require long reaction times, high pressures and temperatures (450–1400 °C). Recently, hydrothermal treatment of colloidal TiO2 suspensions has been shown to produce quality crystalline products at low temperatures (<250 °C). In this paper we extend this idea utilising a direct microwave heating source. A comparison between convection and microwave hydrothermal treatment of colloidal TiO2 is presented. The resulting highly crystalline TiO2 colloids were characterised using Raman spectroscopy, XRD, TEM, and electron diffraction. The results show that the microwave treatment of colloidal TiO2 gives comparable increases in crystallinity with respect to normal hydrothermal treatments while requiring significantly less time and energy than the hydrothermal convection treatment.

Polymer nanocomposites based on P3OT, TPU and SWNT: preparation and characterization

Single walled carbon nanotubes (SWNTs) were incorporated in polymer nanocomposites based on poly(3-octylthiophene) (P3OT), thermoplastic polyurethane (TPU) or a blend of them. Thermogravimetry demonstrated the success of the purification procedure employed in the chemical treatment of SWNTs prior to composite preparation. Stable dispersions of SWNTs in chloroform were obtained by non-covalent interactions with the dissolved polymers. Composites exhibited glass transitions, melting temperatures and heat of fusion which changed in relation to pure polymers. This behavior is discussed as associated to interactions between nanotubes and polymers. The conductivity at room temperature of the blend (TPU-P3OT) with SWNT is higher than the P3OT/SWNT composite.

The effect of consumer risk perceptions and information search on willingness to buy GM food products: A cross cultural analysis

This paper seeks to address the widespread call in the literature for the cross-cultural examination ( and validation) of accepted concepts within consumer behaviour, such as consumer risk perceptions and information search. The findings of the study provide support for a number of accepted relationships, whilst identifying distinct cross cultural differences in external information search and willingness to buy genetically modified (GM) food products by consumers.

A quasi stationary approach to drying kinetics of cylindrical food particulates in a heat pump asisted fluid bed dryer

Experiments were undertaken to study drying kinetics of moist cylindrical shaped food particulates during fluidised bed drying. Cylindrical particles were prepared from Green beans with three different length:diameter ratios, 3:1, 2:1 and 1:1. A batch fluidised bed dryer connected to a heat pump system was used for the experimentation. A Heat pump and fluid bed combination was used to increase overall energy efficiency and achieve higher drying rates. Drying kinetics, were evaluated with non-dimensional moisture at three different drying temperatures of 30, 40 and 50o C. Numerous mathematical models can be used to calculate drying kinetics ranging from analytical models with simplified assumptions to empirical models built by regression using experimental data. Empirical models are commonly used for various food materials due to their simpler approach. However problems in accuracy, limits the applications of empirical models. Some limitations of empirical models could be reduced by using semi-empirical models based on heat and mass transfer of the drying operation. One such method is the quasi-stationary approach. In this study, a modified quasi-stationary approach was used to model drying kinetics of the cylindrical food particles at three drying temperatures.

Prediction of fluidization behaviour and a quasi-stationary approach to drying kinetics of irregular particulate food materials

Changes in fluidization behaviour behaviour was characterised for parallelepiped particles with three aspect ratios, 1:1, 2:1 and 3:1 and spherical particles. All drying experiments were conducted at 500C and 15 % RH using a heat pump dehumidifier system. Fluidization experiments were undertaken for the bed heights of 100, 80, 60 and 40 mm and at 10 moisture content levels. Due to irregularities in shape minimum fluidisation velocity of parallelepiped particulates (potato) could not fitted to any empirical model. Also a generalized equation was used to predict minimum fluidization velocity. The modified quasi-stationary method (MQSM) has been proposed to describe drying kinetics of parallelepiped particulates at 30o C, 40o C and 50o C that dry mostly in the falling rate period in a batch type fluid bed dryer.