Numerical approaches for the analysis of timber frame walls

A numerical approach to simulate the behaviour of timber shear walls under both static and dynamic loading is proposed. Because the behaviour of timber shear walls hinges on the behaviour of the nail connections, the force-displacement behaviour of sheathing-to-framing nail connections are first determined and then used to define the hysteretic properties of finite elements representing these connections. The model nails are subsequently implemented into model walls. The model walls are verified using experimental results for both monotonic and cyclic loading. It is demonstrated that the complex hysteretic behaviour of timber shear walls can be reasonably represented using model shear walls in which nonlinear material failure is concentrated only at the sheathing-to-framing nail connections.

Local seismic cultures: the use of timber frame structures in the south of Portugal

Given the fact that using timber frame structures has proven to improve the seismic behavior of vernacular architecture, as has been reported in past earthquakes in many countries, its preservation as a traditional earthquake resistant practice is important. This paper firstly intends to evaluate whether the use of timber frames as a traditional seismic resistant technique for vernacular architecture in the South of Portugal, traditionally a seismic region, is still active. Secondly, the city of Vila Real de Santo António was selected as a case study because it also followed a Pombaline development contemporary to the reconstruction of Lisbon. The plan included the provision of timber frame partition walls for some of the buildings and, thus, an overview of the type of constructions originally conceived is provided. Finally, the alterations done in the original constructions and the current state of the city center are described and the effect of these changes on the seismic vulnerability of the city is discussed.

Inkjet printing technology for flexible pressure sensors

Tese de Doutoramento Ciência e Engenharia de Polímeros e Compósitos.

Redes sociais, capital social e governança ambiental no Território Portal da Amazônia

O artigo trata de um estudo empírico em que a análise de redes sociais é utilizada para mapear o capital social de atores envolvidos em processos de governança ambiental na Amazônia brasileira. Por meio de entrevistas, foi mapeada a rede de relações de diálogo sobre questões socioambientais de um conjunto de 505 atores no Território Portal da Amazônia. Foram identificadas 3384 relações de diálogo, com uma média de 6,7 parceiros de diálogo por ator. A análise dos aspectos estruturais da rede de diálogo foi utilizada para construir indicadores de capital social de ligação, com mapeamento da organização interna dos atores de um mesmo município, e de conexão, com a caracterização das relações entre atores de municípios diferentes. Em nível municipal, a distribuição das duas formas de capital social permitiu caracterizar os grupos de atores de acordo com as suas atuações diferenciadas na governança ambiental do Território. Em nível territorial, o padrão de conectividade entre os 16 municípios mostra um equilíbrio entre as duas formas de capital social e revela o potencial de comunicação e organização dos atores, como demonstrado no exemplo dos projetos de Agendas 21 locais. Estes resultados demonstram como a análise de redes sociais pode contribuir na definição (ou redefinição) das fronteiras dos territórios de modo a incluir um conjunto de municípios cujos atores mantêm relações sociais efetivas. Ações de governança no Portal da Amazônia são propostas com potencial para fortalecer os processos de diálogo, diminuir os conflitos e promover o uso sustentável dos recursos naturais na Amazônia.

Use of anatomical root markers for species identification in Catasetum (Orchidaceae) at the Portal da Amazônia region, MT, Brazil

Orchidaceae is one of the largest botanical families, with approximately 780 genera. Among the genera of this family, Catasetum currently comprises 166 species. The aim of this study was to characterize the root anatomy of eight Catasetum species, verifying adaptations related to epiphytic habit and looking for features that could contribute to the vegetative identification of such species. The species studied were collected at the Portal da Amazônia region, Mato Grosso state, Brazil. The roots were fixed in FAA 50, cut freehand, and stained with astra blue/fuchsin. Illustrations were obtained with a digital camera mounted on a photomicroscope. The roots of examined species shared most of the anatomical characteristics observed in other species of the Catasetum genus, and many of them have adaptations to the epiphytic habit, such as presence of secondary thickening in the velamen cell walls, exodermis, cortex, and medulla. Some specific features were recognized as having taxonomic application, such as composition of the thickening of velamen cell walls, ornamentation of absorbent root-hair walls, presence of tilosomes, composition and thickening of the cortical cell walls, presence of mycorrhizae, endodermal cell wall thickening, the number of protoxylem poles, and composition and thickening of the central area of the vascular cylinder. These traits are important anatomical markers to separate the species within the genus and to generate a dichotomous identification key for Catasetum. Thus, providing a useful tool for taxonomists of this group

Flexible organic–inorganic hybrid layer encapsulation for organic opto-electronic devices

In this work we produce and study the flexible organic–inorganic hybrid moisture barrier layers for the protection of air sensitive organic opto-electronic devices. The inorganic amorphous silicon nitride layer (SiNx:H) and the organic PMMA [poly (methyl methacrylate)] layer are deposited alternatingly by using hot wire chemical vapor deposition (HW-CVD) and spin-coating techniques, respectively. The effect of organic–inorganic hybrid interfaces is analyzed for increasing number of interfaces. We produce highly transparent (∼80% in the visible region) hybrid structures. The morphological properties are analysed providing a good basis for understanding the variation of the water vapor transmission rate (WVTR) values. A minimum WVTR of 4.5 × 10−5g/m2day is reported at the ambient atmospheric conditions for 7 organic/inorganic interfaces. The hybrid barriers show superb mechanical flexibility which confirms their high potential for flexible applications.

Patterned CNT-PDMS nanocomposites for flexible pressure sensors

This paper reports the fabrication process and characterization of a flexible pressure sensor based on polydimethylsiloxane (PDMS) and multi-walled carbon nanotubes (CNT-PDMS). The proposed approach relies on patterned CNT-PDMS nanocomposite strain gauges fabricated with SU-8 microstructures (with the micropatterns) in a low‑cost and simple fabrication process. This nanocomposite polymer is mounted over a PDMS membrane, which, in turn, lies on top of a PDMS diaphragm like structure. This configuration enables the PDMS membrane to bend when pressure is applied, thereby affecting the nanocomposite strain gauges, effectively changing their electrical resistance. Carbon nanotubes have several advantages such as excellent mechanical properties, high electrical conductivity and thermal stability. Furthermore, the measurement range of the proposed sensor can be adapted according to the application by varying the CNTs content and geometry of microstructure. In addition, the sensor’s biocompatibility, low cost and simple fabrication makes it very appealing for biomechanical strain sensing. The sensor’s sensitivity was about 0.073%ΔR/mmHg.

Flexible gastrointestinal motility pressure sensors based on aluminum thin-film strain-gauge arrays

This paper reports on an innovative approach to measuring intraluminal pressure in the upper gastrointestinal (GI) tract, especially monitoring GI motility and peristaltic movements. The proposed approach relies on thin-film aluminum strain gauges deposited on top of a Kapton membrane, which in turn lies on top of an SU-8 diaphragm-like structure. This structure enables the Kapton membrane to bend when pressure is applied, thereby affecting the strain gauges and effectively changing their electrical resistance. The sensor, with an area of 3.4 mm2, is fabricated using photolithography and standard microfabrication techniques (wet etching). It features a linear response (R2 = 0.9987) and an overall sensitivity of 2.6 mV mmHg−1. Additionally, its topology allows a high integration capability. The strain gauges’ responses to pressure were studied and the fabrication process optimized to achieve high sensitivity, linearity, and reproducibility. The sequential acquisition of the different signals is carried out by a microcontroller, with a 10-bit ADC and a sample rate of 250 Hz. The pressure signals are then presented in a user-friendly interface, developed using the Integrated Development Environment software, QtCreator IDE, for better visualization by physicians.

Flexible thin-film lithium battery

Tese de Doutoramento Programa Doutoral em Engenharia Electrónica e Computadores.

A modular traffic sampling architecture for flexible network measurements

Dissertação de Mestrado (Programa Doutoral em Informática)

O planeamento estratégico e a importância do "Account Planner": a reestruturação do portal da Universidade do Minho: um estudo de caso

Dissertação de mestrado em Ciências da Comunicação (área de especialização em Publicidade e Relações Públicas)

Ciudadanía y bien común en el marco de una ética pública. Citizenship and common good in the frame of a public ethics.

La investigación pretende hacer aportes para la reformulación ético-discursiva de las ideas de ciudadanía y bien común, que sea capaz de articular la libertad y la equidad con la corresponsabilidad solidaria en contextos post-neoliberales de globalización, interculturalidad y exclusión. En este sentido, una reconfiguración de la sociedad y de la ciudadanía implicará mostrar en qué sentido y de qué modo el espacio público tiene que estar abierto no sólo a la competencia y a los consumidores, sino a ciudadanos ilustrados, autónomos y críticos. La investigación parte del supuesto que, desde los presupuestos teóricos, conceptuales y metodológicos de la teoría del discurso y de la teoría de la democracia deliberativa es posible reformular un concepto de bien común apto para articular la integración social en contextos de interacción pluralista y conflictiva, como son las democracias actuales. Puede parecer extraño, y no sin razón, que el concepto de bien común pueda ser rehabilitado en el contexto de sociedades pluralistas y democráticas, e incorporada convincentemente en la estructura de una nueva ética cívica. La extrañeza puede ser aún mayor si se piensa que, en la actualidad, la formulación de una nueva ética cívica se ve enfrentada tanto a desafíos internos, estrictamente ético-filosóficos, como externos, provenientes de problemas y conflictos histórico-contextuales y culturales (Michelini, 1998, 2000). Finalmente, es posible que la supuesta extrañeza esté relacionada también con el hecho de que el concepto de bien común sea empleado no sólo de modo ambiguo, sino que, además, haya sido utilizado en prácticas muy diversas: desde la búsqueda filosófica de la ciudad perfecta y del Estado ideal -en la que Platón manifiesta que "las cosas de los amigos deben ser comunes" (Platón, 1974a, V, 424a, 449c; 1974b, 739a-e)-, hasta las múltiples instrumentalizaciones históricas en las que el concepto de bien común se utilizó para articular la religión con el patriotismo o la razón de Estado. En la historia más o menos reciente de muchos países latinoamericanos encontramos, en este respecto, ejemplos trágicos: en nombre de la razón de Estado y del bien común, no pocas veces se ha pretendido mantener el orden establecido o defender una determinada ideología, incluso vulnerando la legitimidad del Estado de Derecho y lesionando normas éticas fundamentales. El objetivo general de la investigación es fundamentar un sustento teórico coherente para una reelaboración de los conceptos de ciudadanía y bien común en vista de una ética pública de la corresponsabilidad solidaria en sociedades democráticas y en contextos de globalización, interculturalidad y exclusión, e indagar acerca de su aplicabilidad a los campos de la práctica política y educativa. Los resultados del proyecto tendrán un impacto no sólo teórico, sino también práctico en el ámbito de las ciencias humanas, particularmente en el ámbito de la filosofía práctica, la ética pública, la política y el sistema educativo. Además, se propone elaborar lineamientos de acción para las instituciones sociales, educativas y políticas locales, regionales y nacionales, ayudar a esclarecer aspectos centrales de una convivencia democrática y pluralista, y contribuir al esclarecimiento de los deberes, de los derechos y de la corresponsabilidad solidaria.

Frame-coherent 3D stippling for non-photorealistic computer graphics

Stipping, non-photorealistic rendering, non-photorealistic computer graphics

Towards flexible feature composition : static and dynamic binding in software product lines

Magdeburg, Univ., Fak. für Informatik, Diss., 2011

Long-term Forecasting of Frame Alignment Losses for Circuit Emulation Implementation

The article provides a method for long-term forecast of frame alignment losses based on the bit-error rate monitoring for structure-agnostic circuit emulation service over Ethernet in a mobile backhaul network. The developed method with corresponding algorithm allows to detect instants of probable frame alignment losses in a long term perspective in order to give engineering personnel extra time to take some measures aimed at losses prevention. Moreover, long-term forecast of frame alignment losses allows to make a decision about the volume of TDM data encapsulated into a circuit emulation frame in order to increase utilization of the emulated circuit. The developed long-term forecast method formalized with the corresponding algorithm is recognized as cognitive and can act as a part of network predictive monitoring system.