Does flexibility in secondary level mathematics curriculum affect degree performance?

The authors have much experience in developing mathematics skills of first-year engineering students and attempting to ensure a smooth transition from secondary school to university. Concerns exist due to there being flexibility in the choice of modules needed to obtain a secondary level (A-level) mathematics qualification. This qualification is based on some core (pure maths) modules and a selection from mechanics and statistics modules. A survey of aerospace and mechanical engineering students in Queen’s University Belfast revealed that a combination of both mechanics and statistics (the basic module in both) was by far the most popular choice and therefore only about one quarter of this cohort had studied mechanics beyond the basic module within school maths. Those students who studied the extra mechanics and who achieved top grades at school subsequently did better in two core, first-year engineering courses. However, students with a lower grade from school did not seem to gain any significant advantage in the first-year engineering courses despite having the extra mechanics background. This investigation ties in with ongoing and wider concerns with secondary level mathematics provision in the UK.

Interpreting A-level Mathematics grades – as easy as A, B, C?

Many concerns have been expressed that students’ basic mathematical skills have deteriorated during the 1990s and there has been disquiet that current A-level grading does not distinguish adequately between the more able students. This study reports the author’s experiences of teaching maths to large classes of first-year engineering students and aims to enhance understanding of levels of mathematical competence in more recent years. Over the last four years, the classes have consisted of a very large proportion of highly qualified students – about 91% of them had at least grade B in A-level Mathematics. With a small group of students having followed a non-traditional route to university (no A-level maths) and another group having benefitted through taking A-level Further Mathematics at school, the classes have contained a very wide range of mathematical backgrounds. Despite the introductory maths course at university involving mainly repetition of A-level material, students’ marks were spread over a very wide range – for example, A-level Mathematics grade B students have scored across the range 16 – 97%. Analytical integration is the topic which produced the largest variation in performance across the class but, in contrast, the A-level students generally performed well in differentiation. Initial analysis suggests some stability in recent years in the mathematical proficiency of students with a particular A-level Mathematics grade. Allowing choice of applied maths modules as part of the A-level maths qualification increases the variety of students’ mathematical backgrounds and their selection from mechanics, statistics or decision maths is not clear from the final qualification.

Time Efficient Assessment and Feedback Methods for Large Computer-Aided-Design Cohorts

Timely and individualized feedback on coursework is desirable from a student perspective as it facilitates formative development and encourages reflective learning practice. Faculty however are faced with a significant and potentially time consuming challenge when teaching larger cohorts if they are to provide feedback which is timely, individualized and detailed. Additionally, for subjects which assess non-traditional submissions, such as Computer-Aided-Design (CAD), the methods for assessment and feedback tend not to be so well developed or optimized. Issues can also arise over the consistency of the feedback provided. Evaluations of Computer-Assisted feedback in other disciplines (Denton et al, 2008), (Croft et al, 2001) have shown students prefer this method of feedback to traditional “red pen” marking and also that such methods can be more time efficient for faculty.
Herein, approaches are described which make use of technology and additional software tools to speed up, simplify and automate assessment and the provision of feedback for large cohorts of first and second year engineering students studying modules where CAD files are submitted electronically. A range of automated methods are described and compared with more “manual” approaches. Specifically one method uses an application programming interface (API) to interrogate SolidWorks models and extract information into an Excel spreadsheet, which is then used to automatically send feedback emails. Another method describes the use of audio recordings made during model interrogation which reduces the amount of time while increasing the level of detail provided as feedback.
Limitations found with these methods and problems encountered are discussed along with a quantified assessment of time saving efficiencies made.

A Transition Study to Support Curriculum Reform

This paper presents details of a project to support the transition from school to university for engineering students in the UK. The initial phases have already been disseminated by the project collaborators. The background, rationale, objectives and outcomes of this latter phase of the project are presented and specific data from a web-based transition diagnostic is discussed which verifies specific learning issues amongst engineering students enrolling in their first year of study. This prompted further investigations into these specific learning issues, which produced relevant data pertinent to enhancing learning through curriculum reform with the ultimate goal of accommodating the transition from school to university, improving the learning experience and increasing retention.

Saúde mental e comportamentos de risco em estudantes universitários

A saúde dos estudantes do ensino superior é uma importante questão de saúde pública, com impacto não só a nível pessoal e social, como também institucional. Nesse sentido, a presente investigação teve como objectivos: 1) caracterizar a saúde mental dos estudantes universitários, ao nível de sintomas depressivos, stress e bem-estar; 2) identificar os seus padrões de consumo de álcool, em termos de quantidade e frequência de consumo, ingestão esporádica excessiva e tipos de bebidas mais ingeridas; 3) conhecer a prevalência de dois comportamentos de risco ligados ao álcool, os comportamentos sexuais de risco e a condução sob o efeito de álcool; 4) analisar a relação entre saúde mental e consumo de álcool no ensino superior. Para esse efeito, realizou-se um estudo transversal com 666 alunos do 1º ciclo da Universidade de Aveiro. Os instrumentos utilizados foram: Ficha de Caracterização Sociodemográfica e Académica; Medida de Saúde Comportamental-20; Inventário da Depressão em Estudantes Universitários; Inventário de Stress em Estudantes Universitários; Questionário de Comportamentos de Risco em Estudantes Universitários. Os resultados mostraram que 32% dos estudantes se encontravam num patamar disfuncional quanto à sua saúde mental, 15% apresentavam sintomatologia depressiva e 26% sofriam de níveis elevados de stress, mas que apenas uma minoria destes alunos estava a receber apoio psicológico profissional. Os níveis de saúde mental foram inferiores nas mulheres, nos alunos do 1º e do 3º ano, da área de Saúde e de estatuto socioeconómico baixo. Para além disso, a maioria dos estudantes consumia álcool e 41% tiveram episódios de ingestão excessiva no último mês. Durante as festas académicas, um quarto dos estudantes ingeriu cinco ou mais bebidas por noite. O consumo de álcool foi superior nos homens, nos estudantes da área de Engenharias, de estatuto socioeconómico elevado e nos deslocados. Quanto a problemas ligados ao álcool, 13% dos estudantes sexualmente activos admitiram ter tido relações sexuais decorrentes do consumo de álcool, no último ano, e 29% praticaram condução sob o efeito de álcool no último mês. Estes comportamentos foram mais frequentes em estudantes do sexo masculino e naqueles que tiveram episódios de ingestão excessiva. Não se encontrou, de um modo geral, uma relação entre saúde mental e consumo de álcool, tendo sido detectadas apenas correlações, fracas, do stress e do bem-estar com o consumo de álcool. Ao contrário do que era esperado, verificou-se que à medida que o consumo de álcool aumentava, o stress diminuía e o bem-estar aumentava ligeiramente. Estes dados salientam a necessidade de as instituições do ensino superior reforçarem a identificação e o tratamento de problemas existentes e apostarem na prevenção, tanto através de estratégias dirigidas a toda a comunidade, no âmbito da educação para a saúde e da literacia em saúde mental, como através de iniciativas destinadas aos grupos de risco aqui identificados.

Construção de competências transversais no sector das telecomunicações : percepções e estilos de aprendizagem

Tem sido frequentemente referido na literatura que os diplomados do ensino superior estão mal preparados para as exigências do mercado de trabalho. Face à situação económica actual, mais do que conhecimentos académicos, os estudantes necessitam desenvolver competências que promovam a sua empregabilidade e aprendizagem ao longo da vida. Isto é particularmente relevante no sector das Telecomunicações, face às constantes mutações tecnológicas e organizacionais. Estas competências são usualmente designadas por competências transversais, englobam o conjunto de competências que são comuns às diferentes actividades profissionais. Trata-se de competências imprescindíveis à empregabilidade, uma vez que permitem aos indivíduos agir numa multiplicidade de tarefas e funções. O presente trabalho propõe uma caracterização da construção das competências transversais no sector das Telecomunicações, tendo por base as percepções dos estudantes de engenharia, mas também as percepções das empresas do sector. No sentido de apoiar a fundamentação de estratégias práticas promotoras do desenvolvimento das competências transversais, o presente trabalho analisou os estilos de aprendizagem dos alunos de engenharia, tendo sido realizado um estudo para a adaptação do Index of Learning Styles (Felder & Soloman, n.d.) para a população portuguesa. No presente trabalho, 337 estudantes avaliaram o seu domínio num conjunto de competências transversais, bem como a sua importância para um futuro profissional. Desta avaliação foram identificados gaps de competências transversais que traduzem necessidades de desenvolvimento e formação. Foram também analisadas as relações entre as competências transversais e os estilos de aprendizagem dos estudantes, e as relações entre as competências transversais e um conjunto de variáveis psicológicas relacionadas com o desempenho competente: auto-eficácia, auto-regulação e optimismo. Representantes de empresas do sector das Telecomunicações avaliaram a importância das mesmas competências transversais para as práticas de negócio. A interpretação dos resultados, bem como as possíveis implicações destes no desenvolvimento de estratégias promotoras da construção das competências transversais, são discutidos à luz da literatura relevante.

Qualidade, sustentabilidade e FCS: o caso de uma IES privada no Brasil

Este trabalho de investigação foi realizado com o objetivo geral de se descobrir quais são os Fatores Críticos de Sucesso e os aspectos chaves de qualidade e sustentabilidade, a serem considerados no ensino de Engenharia de Produção em um IES privada no Brasil. No presente estudo de caso executou-se uma revisão teórica sistemática nas áreas temáticas da pesquisa, que propiciou a criação de um framework que define os 7 Fatores Críticos de Sucesso ao ensino de Engenharia de Produção, apontando sua divisão nas áreas de qualidade e sustentabilidade, e, por fim, a subdivisão em 6 subáreas de ações operacionais a serem consideradas pela gestão de IES para alcançar melhorias de desempenho em suas atividades. Posteriormente ao levantamento teórico, foi realizado o estudo de caso propriamente dito, que dividiu-se em duas etapas, uma qualitativa e uma quantitativa. Na primeira elaborou-se um roteiro de entrevista em profundidade aplicada a um terço do corpo docente do curso em estudo, captando a impressão destes sobre as temáticas em estudo voltadas à execução de suas atividades. Os dados obtidos foram organizados com o auxílio do software WebQDA, gerando ideias do que deve ser trabalhado para melhorar as condições e resultados do referido curso. A etapa quantitativa foi iniciada com a elaboração de um questionário on-line, desenvolvido a partir do enquadramento teórico e da informação obtida na parte qualitativa do estudo, que envolveu respostas de cerca de dois terços dos discentes de Engenharia de Produção. A informação foi recolhida através de um formulário disponibilizado pelo googledocs, e os resultados foram analisados com o auxílio do software SPSS, permitindo conhecer as expectativas e percepções dos alunos e, consequentemente, os gaps provenientes a serem trabalhados. Finalmente, o estudo revelou que para aspectos de qualidade, os pontos de tangibilidade, como infraestrutura geral, laboratórios técnicos específicos, cantina e biblioteca, precisam ser melhorados, e, para aspectos de sustentabilidade, surge a necessidade de melhorar as formas de divulgação do curso, captação de alunos e propostas para a retenção dos mesmos para outros cursos e projetos da IES. Deste modo, o trabalho desenvolvido atingiu seu objetivo e se mostrou válido para aplicações na IES e em outros cursos da mesma (com as devidas adaptações). Fica como recomendação final aplicar o estudo periodicamente para se captar as mudanças situacionais que ocorrerem, manter um controle eficiente dos aspectos estudados e gerar melhorias contínuas no curso estudado e na própria IES.

Smart object for 3D interaction

This paper reports on the creation of an interface for 3D virtual environments, computer-aided design applications or computer games. Standard computer interfaces are bound to 2D surfaces, e.g., computer mouses, keyboards, touch pads or touch screens. The Smart Object is intended to provide the user with a 3D interface by using sensors that register movement (inertial measurement unit), touch (touch screen) and voice (microphone). The design and development process as well as the tests and results are presented in this paper. The Smart Object was developed by a team of four third-year engineering students from diverse scientific backgrounds and nationalities during one semester.

The European Project Semester at ISEP: the challenge of educating global engineers

Current engineering education challenges require approaches that promote scientific, technical, design and complementary skills while fostering autonomy, innovation and responsibility. The European Project Semester (EPS) at Instituto Superior de Engenharia do Porto (ISEP) (EPS@ISEP) is a one semester project-based learning programme (30 European Credit Transfer Units (ECTU)) for engineering students from diverse scientific backgrounds and nationalities that intends to address these goals. The students, organised in multidisciplinary and multicultural teams, are challenged to solve real multidisciplinary problems during one semester. The EPS package, although on project development (20 ECTU), includes a series of complementary seminars aimed at fostering soft, project-related and engineering transversal skills (10 ECTU). Hence, the students enrolled in this programme improve their transversal skills and learn, together and with the team of supervisors, subjects distinct from their core training. This paper presents the structure, implementation and results of the EPS@ISEP that was created in 2011 to apply the best engineering practices and promote internationalisation and engineering education innovation at ISEP.

Standard commercial education robotic platform: intermediate solution to teaching robotics

Teaching robotics to students at the beginning of their studies has become a huge challenge. Simulation environments can be an effective solution to that challenge where students can interact with simulated robots and have the first contact with robotic constraints. From our previous experience with simulation environments it was possible to observe that students with lower background knowledge in robotics where able to deal with a limited number of constraints, implement a simulated robotic platform and study several sensors. The question is: after this first phase what should be the best approach? Should the student start developing their own hardware? Hardware development is a very important part of an engineer's education but it can also be a difficult phase that could lead to discouragement and loss of motivation in some students. Considering the previous constraints and first year engineering students’ high abandonment rate it is important to develop teaching strategies to deal with this problem in a feasible way. The solution that we propose is the integration of a low-cost standard robotic platform WowWee Rovio as an intermediate solution between the simulation phase and the stage where the students can develop their own robots. This approach will allow the students to keep working in robotic areas such as: cooperative behaviour, perception, navigation and data fusion. The propose approach proved to be a motivation step not only for the students but also for the teachers. Students and teachers were able to reach an agreement between the level of demand imposed by the teachers and satisfaction/motivation of the students.

Una secuencia didáctica para un concepto unificador en un curso de álgebra lineal de un programa de formación a la ingeniería

L’introduction aux concepts unificateurs dans l’enseignement des mathématiques privilégie typiquement l’approche axiomatique. Il n’est pas surprenant de constater qu’une telle approche tend à une algorithmisation des tâches pour augmenter l’efficacité de leur résolution et favoriser la transparence du nouveau concept enseigné (Chevallard, 1991). Cette réponse classique fait néanmoins oublier le rôle unificateur du concept et n’encourage pas à l’utilisation de sa puissance. Afin d’améliorer l’apprentissage d’un concept unificateur, ce travail de thèse étudie la pertinence d’une séquence didactique dans la formation d’ingénieurs centrée sur un concept unificateur de l’algèbre linéaire: la transformation linéaire (TL). La notion d’unification et la question du sens de la linéarité sont abordées à travers l’acquisition de compétences en résolution de problèmes. La séquence des problèmes à résoudre a pour objet le processus de construction d’un concept abstrait (la TL) sur un domaine déjà mathématisé, avec l’intention de dégager l’aspect unificateur de la notion formelle (Astolfi y Drouin, 1992). À partir de résultats de travaux en didactique des sciences et des mathématiques (Dupin 1995; Sfard 1991), nous élaborons des situations didactiques sur la base d’éléments de modélisation, en cherchant à articuler deux façons de concevoir l’objet (« procédurale » et « structurale ») de façon à trouver une stratégie de résolution plus sûre, plus économique et réutilisable. En particulier, nous avons cherché à situer la notion dans différents domaines mathématiques où elle est applicable : arithmétique, géométrique, algébrique et analytique. La séquence vise à développer des liens entre différents cadres mathématiques, et entre différentes représentations de la TL dans les différents registres mathématiques, en s’inspirant notamment dans cette démarche du développement historique de la notion. De plus, la séquence didactique vise à maintenir un équilibre entre le côté applicable des tâches à la pratique professionnelle visée, et le côté théorique propice à la structuration des concepts. L’étude a été conduite avec des étudiants chiliens en formation au génie, dans le premier cours d’algèbre linéaire. Nous avons mené une analyse a priori détaillée afin de renforcer la robustesse de la séquence et de préparer à l’analyse des données. Par l’analyse des réponses au questionnaire d’entrée, des productions des équipes et des commentaires reçus en entrevus, nous avons pu identifier les compétences mathématiques et les niveaux d’explicitation (Caron, 2004) mis à contribution dans l’utilisation de la TL. Les résultats obtenus montrent l’émergence du rôle unificateur de la TL, même chez ceux dont les habitudes en résolution de problèmes mathématiques sont marquées par une orientation procédurale, tant dans l’apprentissage que dans l’enseignement. La séquence didactique a montré son efficacité pour la construction progressive chez les étudiants de la notion de transformation linéaire (TL), avec le sens et les propriétés qui lui sont propres : la TL apparaît ainsi comme un moyen économique de résoudre des problèmes extérieurs à l’algèbre linéaire, ce qui permet aux étudiants d’en abstraire les propriétés sous-jacentes. Par ailleurs, nous avons pu observer que certains concepts enseignés auparavant peuvent agir comme obstacles à l’unification visée. Cela peut ramener les étudiants à leur point de départ, et le rôle de la TL se résume dans ces conditions à révéler des connaissances partielles, plutôt qu’à guider la résolution.

Preparadurías estudiantiles como proceso de aprendizaje colaborativo entre estudiantes de ingeniería de la UNEXPO, Vicerectorado de Puerto Ordaz

Se trata de una investigación que se realizó en la Universidad Nacional Experimental Politécnica "Antonio José de Sucre" (UNEXPO), Vicerrectorado Puerto Ordaz, Venezuela, referida al estudio e intervención educativa en el programa de preparadurías (mecanismo de asesoramiento académico entre estudiantes de ingeniería), en el ámbito de matemática I (asignatura crítica), que desarrolló procesos participativos de enseñanza-aprendizaje en aula fundamentados en una metodología colaborativa, de cara a la promoción de un cambio educativo. La investigación tiene como propósito promover la mejora de los procesos de enseñanza aprendizaje que se desarrollan en este programa, facilitando la participación de los preparadores en un proceso de intervención. Las acciones que orientaron la intervención en el aula, se fundamentan en una concepción constructivista y sociocultural de los procesos de enseñanza-aprendizaje, que otorgan un papel preponderante a la actividad del alumno mediada por factores de su contexto educativo. Desde el punto de vista metodológico, estamos frente a un tipo de investigación interpretativa, sustentada operacionalmente por la metodología cualitativa. Para llevarla a cabo, se definieron tres fases interconectadas en el proceso investigativo: descriptiva, de intervención y valoración; destacando que la fase intervención en el aula, se inspiró en la investigación-acción, como mecanismo indagatorio y propulsor de la transformación en la práctica. En estas fases, fue predominante la identificación de informantes clave de acuerdo a momentos y ámbitos de actuación y combinaciones que relacionaban técnicas narrativas como los grupos de discusión, entrevistas cualitativas y la observación, entre otras. Los resultados más resaltantes, tienden a realizar una caracterización exhaustiva de las preparadurías, describir de forma pormenorizada la experiencia vivida con los preparadores, la cual trata de aportar una estrategia pedagógica en matemática I, traducida en el aprovechamiento de las relaciones simétricas entre alumnos en ambientes colaborativos. La investigación permite a la UNEXPO, otras universidades y a la comunidad educativa, evaluar la posibilidades que ofrece una propuesta innovadora de enseñanza-aprendizaje en matemática I, que puede orientar las acciones pedagógicas en una de las asignaturas con más bajo porcentaje de promoción; combinando la colaboración, participación; explorando y aprovechando las relaciones entre iguales en ambientes alternativos de aprendizaje como las preparadurías.

A psychometric analysis of reliability and validity of the index of learning styles (ILS)

Prior literature showed that Felder and Silverman learning styles model (FSLSM) was widely adopted to cater to individual styles of learners whether in traditional or Technology Enhanced Learning (TEL). In order to infer this model, the Index of Learning Styles (ILS) instrument was proposed. This research aims to analyse the soundness of this instrument in an Arabic sample. Data were integrated from different courses and years. A total of 259 engineering students participated voluntarily in the study. The reliability was analysed by applying internal construct reliability, inter-scale correlation, and total item correlation. The construct validity was also considered by running factor analysis. The overall results indicated that the reliability and validity of perception and input dimensions were moderately supported, whereas processing and understanding dimensions showed low internal-construct consistency and their items were weakly loaded in the associated constructs. Generally, the instrument needs further effort to improve its soundness. However, considering the consistency of the produced results of engineering students irrespective of cross-cultural differences, it can be adopted to diagnose learning styles.

A testing and demonstration facility for PV systems and components

A test and demonstration facility for PV and PV hybrid systems and system components has been designed and installed at Dalarna University in Sweden. The facility allows studies of complete PV systems or single components in a range of 0.1-10 kW. The facility includes two grid-connected PV systems, a PV Hybrid off-grid system, three emulators and the necessary measurement and control equipment. Tests can be done manually or automatically through programmed test procedures controlled that will be implemented in Labview. The facility shall be used by researchers, professionals of the industry and engineering students.

Student responses to activities designed to develop generic professional skills

This paper reports on student responses to a range of assessment activities in a final-year engineering unit. Existing assessment activities were supplemented with new activities, the overall aim being to link the assessment activities more effectively to the material being studied, and to develop a range of generic skills important in professional engineering practice. A class survey was undertaken at the beginning of the semester to establish the initial attitudes to the new assessment activities. This was followed up with an end-of-semester survey to determine the change in perceived value of the assessment activities, and to collect student feedback regarding the activities. The perceived value of the assessment activities was determined using a Likert rating scale, while student feedback was collected using open-ended questions. The assessment activities evaluated were group work, case study investigation, report writing, oral presentation, group self-assessment, industrial interviews, and written reflective journals. The responses indicate that engineering students value a range of assessment activities. They value highly visits to real engineering organizations, and—contrary to popular belief —value and enjoy oral presentation exercises.