Boron nitride nanotubes : synthesis, characterization, functionalization, and potential applications

Boron nitride nanotubes (BNNTs) are structurally similar to carbon nanotubes (CNTs), but exhibit completely different physical and chemical properties. Thus, BNNTs with various interesting properties may be complementary to CNTs and provide an alternative perspective to be useful in different applications. However, synthesis of high quality of BNNTs is still challenging. Hence, the major goals of this research work focus on the fundamental study of synthesis, characterizations, functionalization, and explorations of potential applications. In this work, we have established a new growth vapor trapping (GVT) approach to produce high quality and quantity BNNTs on a Si substrate, by using a conventional tube furnace. This chemical vapor deposition (CVD) approach was conducted at a growth temperature of 1200 °C. As compared to other known approaches, our GVT technique is much simpler in experimental setup and requires relatively lower growth temperatures. The as-grown BNNTs are fully characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron energy loss spectroscopy (EELS), Energy Filtered Mapping, Raman spectroscopy, Fourier Transform Infra Red spectroscopy (FTIR), UV-Visible (UV-vis) absorption spectroscopy, etc. Following this success, the growth of BNNTs is now as convenient as growing CNTs and ZnO nanowires. Some important parameters have been identified to produce high-quality BNNTs on Si substrates. Furthermore, we have identified a series of effective catalysts for patterned growth of BNNTs at desirable or pre-defined locations. This catalytic CVD technique is achieved based on our finding that MgO, Ni or Fe are the good catalysts for the growth of BNNTs. The success of patterned growth not only explains the role of catalysts in the formation of BNNTs, this technique will also become technologically important for future device fabrication of BNNTs. Following our success in controlled growth of BNNTs on substrates, we have discovered the superhydrophobic behavior of these partially vertically aligned BNNTs. Since BNNTs are chemically inert, resistive to oxidation up to ~1000°C, and transparent to UV-visible light, our discovery suggests that BNNTs could be useful as self-cleaning, insulating and protective coatings under rigorous chemical and thermal conditions. We have also established various approaches to functionalize BNNTs with polymeric molecules and carbon coatings. First, we showed that BNNTs can be functionalized by mPEG-DSPE (Polyethylene glycol-1,2-distearoyl-sn-glycero-3-phosphoethanolamine), a bio-compatible polymer that helps disperse and dissolve BNNTs in water solution. Furthermore, well-dispersed BNNTs in water can be cut from its original length of >10µm to(>20hrs). This success is an essential step to implement BNNTs in biomedical applications. On the other hand, we have also succeeded to functionalize BNNTs with various conjugated polymers. This success enables the dispersion of BNNTs in organic solvents instead of water. Our approaches are useful for applications of BNNTs in high-strength composites. In addition, we have also functionalized BNNTs with carbon decoration. This was performed by introducing methane (CH4) gas into the growth process of BNNT. Graphitic carbon coatings can be deposited on the side wall of BNNTs with thicknesses ranging from 2 to 5 nm. This success can modulate the conductivity of pure BNNTs from insulating to weakly electrically conductive. Finally, efforts were devoted to explore the application of the wide bandgap BNNTs in solar-blind deep UV (DUV) photo-detectors. We found that photoelectric current generated by the DUV light was dominated in the microelectrodes of our devices. The contribution of photocurrent from BNNTs is not significant if there is any. Implication from these preliminary experiments and potential future work are discussed.

The STEREO/PLASTIC response to solar wind ions (Flight measurements and models)

The Plasma and Supra-Thermal Ion Composition (PLASTIC) instrument is one of four experiment packages on board of the two identical STEREO spacecraft A and B, which were successfully launched from Cape Canaveral on 26 October 2006. During the two years of the nominal STEREO mission, PLASTIC is providing us with the plasma characteristics of protons, alpha particles, and heavy ions. PLASTIC will also provide key diagnostic measurements in the form of the mass and charge state composition of heavy ions. Three measurements (E/qk, time of flight, ESSD) from the pulse height raw data are used to characterize the solar wind ions from the solar wind sector, and part of the suprathermal particles from the wide-angle partition with respect to mass, atomic number and charge state. In this paper, we present a new method for flight data analysis based on simulations of the PLASTIC response to solar wind ions. We present the response of the entrance system / energy analyzer in an analytical form. Based on stopping power theory, we use an analytical expression for the energy loss of the ions when they pass through a thin carbon foil. This allows us to model analytically the response of the time of flight mass spectrometer to solar wind ions. Thus we present a new version of the analytical response of the solid state detectors to solar wind ions. Various important parameters needed for our models were derived, based on calibration data and on the first flight measurements obtained from STEREO-A. We used information from each measured event that is registered in full resolution in the Pulse Height Analysis words and we derived a new algorithm for the analysis of both existing and future data sets of a similar nature which was tested and works well. This algorithm allows us to obtain, for each measured event, the mass, atomic number and charge state in the correct physical units. Finally, an important criterion was developed for filtering our Fe raw flight data set from the pulse height data without discriminating charge states.

The differential production cross section of the phi (1020) meson in sqrts = 7 TeV pp collisions measured with the ATLAS detector

Ameasurement is presented of the φ×BR(φ → K+K−) production cross section at √s = 7 TeV using pp collision data corresponding to an integrated luminosity of 383 μb−1, collected with theATLAS experiment at the LHC. Selection of φ(1020) mesons is based on the identification of charged kaons by their energy loss in the pixel detector. The differential cross section ismeasured as a function of the transverse momentum, pT,φ , and rapidity, yφ, of the φ(1020) meson in the fiducial region 500< pT,φ <1200MeV, |yφ| < 0.8, kaon pT,K > 230 MeV and kaon momentum pK < 800 MeV. The integrated φ(1020)-meson production cross section in this fiducial range is measured to be σφ×BR(φ → K+K−) = 570 ± 8 (stat) ± 66 (syst) ± 20 (lumi) μb.

Morphological alterations in the liver of yellow perch (Perca flavescens) from a biological mercury hotspot

Mercury (Hg) contamination is a global issue due to its anthropogenic release, long-range transport, and deposition in remote areas. In Kejimkujik National Park and National Historic Site, Nova Scotia, Canada, high concentrations of total mercury (THg) were found in tissues of yellow perch (Perca flavescens). The aim of this study was to evaluate a possible relationship between THg concentrations and the morphology of perch liver as a main site of metal storage and toxicity. Yellow perch were sampled from five lakes known to contain fish representing a wide range in Hg concentrations in fall 2013. The ultrastructure of hepatocytes and the distribution of Hg within the liver parenchyma were analyzed by transmission electron microscopy (TEM) and electron energy loss spectrometry (EELS). The relative area of macrophage aggregates (MAs) in the liver was determined using image analysis software and fluorescence microscopy. No relation between general health indicators (Fulton's condition index) and THg was observed. In line with this, TEM examination of the liver ultrastructure revealed no prominent pathologies related to THg accumulation. However, a morphological parameter that appeared to increase with muscle THg was the relative area of MAs in the liver. The hepatic lysosomes appeared to be enlarged in samples with the highest THg concentrations. Interestingly, EELS analysis revealed that the MAs and hepatic lysosomes contained Hg.

Charge exchange in cometary coma: Discovery of H- ions in the solar wind close to comet 67P/Churyumov-Gerasimenko

As Rosetta was orbiting comet 67P/Churyumov-Gerasimenko, the Ion and Electron Sensor detected negative particles with angular distributions like those of the concurrently measured solar wind protons but with fluxes of only about 10% of the proton fluxes and energies of about 90% of the proton energies. Using well-known cross sections and energy-loss data, it is determined that the fluxes and energies of the negative particles are consistent with the production of H- ions in the solar wind by double charge exchange with molecules in the coma.

Temperature time series and physical properties of snow samples of a high-arctic permafrost site on Svalbard, Norway

Independent measurements of radiation, sensible and latent heat fluxes and the ground heat flux are used to describe the annual cycle of the surface energy budget at a high-arctic permafrost site on Svalbard. During summer, the net short-wave radiation is the dominant energy source, while well developed turbulent processes and the heat flux in the ground lead to a cooling of the surface. About 15% of the net radiation is consumed by the seasonal thawing of the active layer in July and August. The Bowen ratio is found to vary between 0.25 and 2, depending on water content of the uppermost soil layer. During the polar night in winter, the net long-wave radiation is the dominant energy loss channel for the surface, which is mainly compensated by the sensible heat flux and, to a lesser extent, by the ground heat flux, which originates from the refreezing of the active layer. The average annual sensible heat flux of -6.9 W/m**2 is composed of strong positive fluxes in July and August, while negative fluxes dominate during the rest of the year. With 6.8 W/m**2, the latent heat flux more or less compensates the sensible heat flux in the annual average. Strong evaporation occurs during the snow melt period and particularly during the snow-free period in summer and fall. When the ground is covered by snow, latent heat fluxes through sublimation of snow are recorded, but are insignificant for the average surface energy budget. The near-surface atmospheric stratification is found to be predominantly unstable to neutral, when the ground is snow-free, and stable to neutral for snow-covered ground. Due to long-lasting near-surface inversions in winter, an average temperature difference of approximately 3 K exists between the air temperature at 10 m height and the surface temperature of the snow.

High quality InAlN single layers lattice-matched to GaN grown by molecular beam epitaxy

We report on properties of high quality ~60 nm thick InAlN layers nearly in-plane lattice-matched to GaN, grown on c-plane GaN-on-sapphire templates by plasma-assisted molecular beam epitaxy. Excellent crystalline quality and low surface roughness are confirmed by X-ray diffraction, transmission electron microscopy, and atomic force microscopy. High annular dark field observations reveal a periodic in-plane indium content variation (8 nm period), whereas optical measurements evidence certain residual absorption below the band-gap. The indium fluctuation is estimated to be +/- 1.2% around the nominal 17% indium content via plasmon energy oscillations assessed by electron energy loss spectroscopy with sub-nanometric spatial resolution.

Optoelectronic Properties of InAlN/GaN Distributed Bragg Reflector Heterostructure Examined by Valence

High-resolution monochromated electron energy loss spectroscopy (EELS) at subnanometric spatial resolution and <200 meV energy resolution has been used to assess the valence band properties of a distributed Bragg reflector multilayer heterostructure composed of InAlN lattice matched to GaN. This work thoroughly presents the collection of methods and computational tools put together for this task. Among these are zero-loss-peak subtraction and nonlinear fitting tools, and theoretical modeling of the electron scattering distribution. EELS analysis allows retrieval of a great amount of information: indium concentration in the InAlN layers is monitored through the local plasmon energy position and calculated using a bowing parameter version of Vegard Law. Also a dielectric characterization of the InAlN and GaN layers has been performed through Kramers-Kronig analysis of the Valence-EELS data, allowing band gap energy to be measured and an insight on the polytypism of the GaN layers.

Radiation heat savings in polysilicon production: validation of results through a CVD laboratory prototype

This work aims at a deeper understanding of the energy loss phenomenon in polysilicon production reactors by the so-called Siemens process. Contributions to the energy consumption of the polysilicon deposition step are studied in this paper, focusing on the radiation heat loss phenomenon. A theoretical model for radiation heat loss calculations is experimentally validated with the help of a laboratory CVD prototype. Following the results of the model, relevant parameters that directly affect the amount of radiation heat losses are put forward. Numerical results of the model applied to a state-of-the-art industrial reactor show the influence of these parameters on energy consumption due to radiation per kilogram of silicon produced; the radiation heat loss can be reduced by 3.8% when the reactor inner wall radius is reduced from 0.78 to 0.70 m, by 25% when the wall emissivity is reduced from 0.5 to 0.3, and by 12% when the final rod diameter is increased from 12 to 15 cm.

A “midinfrared” scenario for cuprate superconductivity

I conjecture that the mechanism of superconductivity in the cuprates is a saving, due to the improved screening resulting from Cooper pair formation, of the part of the Coulomb energy associated with long wavelengths and midinfrared frequencies. This scenario is shown to provide a plausible explanation of the trend of transition temperature with layering structure in the Ca-spaced compounds and to predict a spectacularly large decrease in the electron-energy-loss spectroscopy cross-section in the midinfrared region on transition to the superconducting state, as well as less spectacular but still surprisingly large changes in the optical behavior. Existing experimental results appear to be consistent with this picture.

Nitrato na dieta de ruminantes como estratégia nutricional para mitigação de metano entérico

A produção de metano entérico está entre as principais fontes de emissão de gases de efeito estufa dentre as atividades agropecuárias, além de gerar perda energética ao animal de até 12% da energia bruta consumida. Assim, o objetivo deste trabalho foi avaliar o uso de nitrato de cálcio encapsulado na alimentação de ruminantes como estratégia nutricional a mitigação de metano entérico. O experimento consistiu de duas fases. Fase I: Foram testadas dietas suplementadas com produto comercial de nitrato de cálcio encapsulado utilizando a técnica semiautomática de produção de gases in vitro. Meio grama de substrato com 50 mL de meio de incubação e 25 mL de inóculo ruminal foram incubados em frascos de vidro (160 mL) à 39 ºC por 24 horas para determinação da melhor dieta a ser testada in vivo. O primeiro ensaio testou a associação entre a monensina (dietas com e sem adição de monensina) e doses de nitrato encapsulado (0; 1,5 e 3% da matéria seca (MS)) para mitigação de metano in vitro. Não foi observada interação entre monensina e nitrato para as variáveis testadas. O segundo ensaio in vitro testou a interação do tipo de dieta com duas relações concentrado:volumoso, 20:80 e 80:20, e a inclusão de doses de nitrato encapsulado (0; 1,5; 3 e 4,5% MS). Embora não foi observado efeito associativo entre dieta e nitrato para redução de metano, foi observada mudança nos produtos da fermentação ruminal, com redução de propionato, em decorrência da concorrência de nitrato e propianogênicas por hidrogênio mais escasso em dietas com menor fermentação. Fase II: Conforme os resultados obtidos na Fase I, na segunda fase foi avaliado o efeito associativo da relação de concentrado:volumoso da dieta e a dose de nitrato sobre a emissão de metano, constituintes ruminais e toxicidade do nitrato in vivo. Utilizou-se seis borregos canulados no rúmen, distribuídos em delineamento experimental quadrado latino 6 x 6, em fatorial 2 x 3. Os fatores foram tipo de dieta (relação concentrado:volumoso 20:80 e 80:20) e inclusão de doses de nitrato encapsulado na dieta (0; 1,5 e 3% MS) em substituição gradual ao farelo de soja, totalizando seis tratamentos. Os teores de substituição do farelo de soja pelo nitrato foram em equivalente proteico de maneira a deixar as dietas isonitrogenadas. Os animais foram adaptados gradualmente a oferta de nitrato dietético para evitar problemas com toxidez. A análise de toxicidade foi avaliada pela taxa de metahemoglobina no sangue dos ovinos 3 horas após a alimentação. Nitrato reduziu a produção de metano em ambas as dietas. Os níveis de metahemoglobina no sangue dos animais não foram alterados pela adição de nitrato. Foi observado efeito associativo entre o tipo de dieta e nitrato para os produtos da fermentação ruminal, como acetato, que aumentou linearmente nas dietas com 80% de concentrado quando nitrato foi adicionado. Concluí-se que nitrato, utilizado de forma segura, é uma promissora estratégia para redução de metano entérico independentemente do tipo de dieta com que está sendo suplementado

Desempenho propulsivo de embarcações de pesca: estudo aplicado à melhoria das embarcações do Espírito Santo.

Este trabalho apresenta um procedimento simples e robusto para avaliação e análise do desempenho de instalações propulsoras de embarcações de pesca operando no Estado do Espírito Santo. O objetivo é verificar se as embarcações estão operando com baixa eficiência propulsiva, portanto, com consumo de combustível maior do que o desejável, e identificar possíveis ações de melhoria desta eficiência que poderiam ser implementadas com baixo custo. Tendo em vista as condições artesanais da construção e operação das embarcações de pesca no Espírito Santo, o procedimento foi desenvolvido de forma a poder ser aplicado com relativa facilidade pelas pessoas envolvidas na atividade pesqueira artesanal neste Estado. O procedimento envolve o levantamento de informações sobre a geometria do casco, as características da instalação propulsora existente e sobre alguns aspectos do desempenho das embarcações. Para este levantamento são propostos métodos e técnicas suficientemente simples para que possam ser facilmente aplicadas nos estaleiros. Com base nestes dados levantados implementou-se no procedimento proposto diversos algoritmos que permitem determinar o coeficiente propulsivo das embarcações de pesca e a perda de energia útil que ocorre tanto no motor, por conta de condições inadequadas de operação, quanto na transmissão desta energia para o hélice. Para a validação dos métodos e técnicas envolvidos neste procedimento e dos resultados fornecidos por ele, o mesmo foi aplicado em alguns cascos de embarcações de pesca disponíveis em estaleiros visitados no Estado. Para uma destas embarcações o procedimento foi aplicado em sua totalidade, permitindo identificar a baixa eficiência da instalação propulsora e algumas das possíveis causas que provocam a perda de energia útil no sistema. Finalmente, com base nesse exemplo de aplicação, um estudo de possíveis melhorias na instalação propulsora é apresentado ao final do trabalho.

Life Experiences of People Affected by Crohn’s Disease and Their Support Networks Scoping Review

This scoping review identifies and describes relevant studies related to the evidence published on life experiences and perceived social support of people affected by Crohn’s disease. Twenty-three studies were definitely selected and analyzed for the topics explored. The overall findings show patients’ needs and perceptions. There is a lack of evidence about patients’ perceived needs as well as the understanding of social support that has contributed to improve their life experiences with that chronic illness. Lack of energy, loss of body control, body image damaged due to different treatments and surgeries, symptoms related to fear of disease, feeling burdened loss related to independence, and so on are some of the concerns with having to live with those affected by the Crohn. To underline those experiences through this scoping review provides valuable data for health care teams, especially for the nursing profession, considered by those affected as one of the main roles along the whole pathological process. This review provides the basis for developing broader research on the relatively underexplored topics and consequently improves specific programs that could address patients’ needs.

Vibrational methods applied to NDT testing and fluid density measurement

A system for the NDI' testing of the integrity of conposite materials and of adhesive bonds has been developed to meet industrial requirements. The vibration techniques used were found to be applicable to the development of fluid measuring transducers. The vibrational spectra of thin rectangular bars were used for the NDT work. A machined cut in a bar had a significant effect on the spectrum but a genuine crack gave an unambiguous response at high amplitudes. This was the generation of fretting crack noise at frequencies far above that of the drive. A specially designed vibrational decrement meter which, in effect, measures mechanical energy loss enabled a numerical classification of material adhesion to be obtained. This was used to study bars which had been flame or plasma sprayed with a variety of materials. It has become a useful tool in optimising coating methods. A direct industrial application was to classify piston rings of high performance I.C. engines. Each consists of a cast iron ring with a channel into which molybdenum, a good bearing surface, is sprayed. The NDT classification agreed quite well with the destructive test normally used. The techniques and equipment used for the NOT work were applied to the development of the tuning fork transducers investigated by Hassan into commercial density and viscosity devices. Using narrowly spaced, large area tines a thin lamina of fluid is trapped between them. It stores a large fraction of the vibrational energy which, acting as an inertia load reduces the frequency. Magnetostrictive and piezoelectric effects together or in combination enable the fork to be operated through a flange. This allows it to be used in pipeline or 'dipstick' applications. Using a different tine geometry the viscosity loading can be predoninant. This as well as the signal decrement of the density transducer makes a practical viscometer.

Finite element analysis of particle impact problems

Particle impacts are of fundamental importance in many areas and there has been a renewed interest in research on particle impact problems. A comprehensive investigation of the particle impact problems, using finite element (FE) methods, is presented in this thesis. The capability of FE procedures for modelling particle impacts is demonstrated by excellent agreements between FE analysis results and previous theoretical, experimental and numerical results. For normal impacts of elastic particles, it is found that the energy loss due to stress wave propagation is negligible if it can reflect more than three times during the impact, for which Hertz theory provides a good prediction of impact behaviour provided that the contact deformation is sufficiently small. For normal impact of plastic particles, the energy loss due to stress wave propagation is also generally negligible so that the energy loss is mainly due to plastic deformation. Finite-deformation plastic impact is addressed in this thesis so that plastic impacts can be categorised into elastic-plastic impact and finite-deformation plastic impact. Criteria for the onset of finite-deformation plastic impacts are proposed in terms of impact velocity and material properties. It is found that the coefficient of restitution depends mainly upon the ratio of impact velocity to yield Vni/Vy0 for elastic-plastic impacts, but it is proportional to [(Vni/Vy0)*(Y/E*)]-1/2, where Y /E* is the representative yield strain for finite-deformation plastic impacts. A theoretical model for elastic-plastic impacts is also developed and compares favourably with FEA and previous experimental results. The effect of work hardening is also investigated.