An EU mechanism on Democracy, the Rule of Law and Fundamental Rights. CEPS Paper in Liberty and Security in Europe No. 91/April 2016 Thursday, 21 April 2016

The European Union is founded on a set of common principles of democracy, the rule of law, and fundamental rights, as enshrined in Article 2 of the Treaty on the European Union. Whereas future Member States are vetted for their compliance with these values before they accede to the Union, no similar method exists to supervise adherence to these foundational principles after accession. EU history proved that this ‘Copenhagen dilemma’ was far from theoretical. EU Member State governments’ adherence to foundational EU values cannot be taken for granted. Violations may happen in individual cases, or in a systemic way, which may go as far as overthrowing the rule of law. Against this background the European Parliament initiated a Legislative Own-Initiative Report on the establishment of an EU mechanism on democracy, the rule of law and fundamental rights and proposed among others a Scoreboard on the basis of common and objective indicators by which foundational values can be measured. This Research Paper assesses the need and possibilities for the establishment of an EU Scoreboard, as well as its related social, economic, legal and political ‘costs and benefits’.

Efficiency, costs and trade-offs in marine reserve system design

With marine biodiversity conservation the primary goal for reserve planning initiatives, a site's conservation potential is typically evaluated on the basis of the biological and physical features it contains. By comparison, socio-economic information is seldom a formal consideration of the reserve system design problem and generally limited to an assessment of threats, vulnerability or compatibility with surrounding uses. This is perhaps surprising given broad recognition that the success of reserve establishment is highly dependent on widespread stakeholder and community support. Using information on the spatial distribution and intensity of commercial rock lobster catch in South Australia, we demonstrate the capacity of mathematical reserve selection procedures to integrate socio-economic and biophysical information for marine reserve system design. Analyses of trade-offs highlight the opportunities to design representative, efficient and practical marine reserve systems that minimise potential loss to commercial users. We found that the objective of minimising the areal extent of the reserve system was barely compromised by incorporating economic design constraints. With a small increase in area (< 3%) and boundary length (< 10%), the economic impact of marine reserves on the commercial rock lobster fishery was reduced by more than a third. We considered also how a reserve planner might prioritise conservation areas using information on a planning units selection frequency. We found that selection frequencies alone were not a reliable guide for the selection of marine reserve systems, but could be used with approaches such as summed irreplaceability to direct conservation effort for efficient marine reserve design.

The impact of service characteristics on the switching costs-customer loyalty link

This research investigates the interrelationship between service characteristics and switching costs and makes two contributions to the service retailing literature: (1) As a means of better understanding the effectiveness of switching costs, the study suggests a two-dimensional typology of switching costs, including internal and external switching costs and (2) it reveals that the effect of these switching costs on customer loyalty is contingent upon four service characteristics (the IHIP characteristics of service). We carried out a meta-analytic review of the literature on the switching costs-customer loyalty link and created a hierarchical linear model using a sample of 1,694 customers from 51 service industries. Results reveal that external switching costs have a stronger average effect on customer loyalty than do internal switching costs. Moreover, we find that IHIP characteristics moderate the links between switching costs and customer loyalty. Thus, the link between external switching costs and customer loyalty is weaker in industries higher in the four service characteristics (as compared to industries lower in these characteristics), while the opposite moderating effect of service characteristics for the internal switching costs-loyalty link is noted. © 2014 New York University.

Developing of Distributed Virtual Laboratories for Smart Sensor System Design Based on Multi-Dimensional Access Method

In the article it is considered preconditions and main principles of creation of virtual laboratories for computer-aided design, as tools for interdisciplinary researches. Virtual laboratory, what are offered, is worth to be used on the stage of the requirements specification or EFT-stage, because it gives the possibility of fast estimating of the project realization, certain characteristics and, as a result, expected benefit of its applications. Using of these technologies already increase automation level of design stages of new devices for different purposes. Proposed computer technology gives possibility to specialists from such scientific fields, as chemistry, biology, biochemistry, physics etc, to check possibility of device creating on the basis of developed sensors. It lets to reduce terms and costs of designing of computer devices and systems on the early stages of designing, for example on the stage of requirements specification or EFT-stage. An important feature of this project is using the advanced multi-dimensional access method for organizing the information base of the Virtual laboratory.

A tranzakciós költségek és a szabványosítás kapcsolata (Relationship between transaction costs and standardization)

Az elmúlt néhány évtizedben a szabványosítás terén igen komoly változások mentek végbe. Ugrásszerűen megnőtt a szabványok száma, és jelentősen átalakult a szabványosítás folyamata is. Ezzel párhuzamosan a téma gazdasági hatásaival foglalkozó kutatások száma is megsokszorozódott, ami elsősorban a hálózati externáliák irodalmának robbanásszerű gyarapodásának köszönhető. Jelen tanulmány – az elméletek fősodrától eltérően – a tranzakciós költségek elméletében (TKE) helyezi el a szabványosítást. A szabványok és a tranzakciós költségek kapcsolatáról már születtek korábban is tanulmányok, de ezek a szabványoknak a tranzakciós költségekre gyakorolt hatásaira fókuszáltak. A tanulmány ezzel szemben arra helyezi a hangsúlyt, hogy azonosítsa a tranzakciós költségeknek a szabványosításra gyakorolt hatásait. A kutatás célja, hogy olyan elméleti alapot adjon, amelyben a témakör átfogóan elemezhető. A fő kutatási kérdés az, hogy mitől függ az, hogy melyik mechanizmus kereteiben érdemes a szabványosítást lebonyolítani. ________ Significant changes have characterized the last few decades of standardization. The number of standards has dramatically increased and processes of standardization have also changed a lot. At the same time the amount of researches that are concerned with the economic impact of standardization has also multiplied due to the boom in the literature of network externalities. Unlike the mainstream, this paper places standardization in the theory of transaction cost economics. Although there are earlier papers that are concerned with the relationship between standards and transaction costs, these studies focus on the impact of standards on transaction costs. In contrast, this paper lays emphasis on the identification of the impact of transaction costs on standardization. This study aims to provide a theoretical basis for the comprehensive analyses. The main research question: What determines which coordination mechanism is used to evolve a standard?

THE COSTS OF RAISING EQUITY RATIO FOR BANKS Evidence from publicly listed banks operating in Finland

The solvency rate of banks differs from the other corporations. The equity rate of a bank is lower than it is in corporations of other field of business. However, functional banking industry has huge impact on the whole society. The equity rate of a bank needs to be higher because that makes the banking industry more stable as the probability of the banks going under will decrease. If a bank goes belly up, the government will be compensating the deposits since it has granted the bank’s depositors a deposit insurance. This means that the payment comes from the tax payers in the last resort. Economic conversation has long concentrated on the costs of raising equity ratio. It has been a common belief that raising equity ratio also increases the banks’ funding costs in the same phase and these costs will be redistributed to the banks customers as higher service charges. Regardless of the common belief, the actual reaction of the funding costs to the higher equity ratio has been studied only a little in Europe and no study has been constructed in Finland. Before it can be calculated whether the higher stability of the banking industry that is caused by the raise in equity levels compensates the extra costs in funding costs, it must be calculated how much the actual increase in the funding costs is. Currently the banking industry is controlled by complex and heavy regulation. To maintain such a complex system inflicts major costs in itself. This research leans on the Modigliani and Miller theory, which shows that the finance structure of a firm is irrelevant to their funding costs. In addition, this research follows the calculations of Miller, Yang ja Marcheggianon (2012) and Vale (2011) where they calculate the funding costs after the doubling of specific banks’ equity ratios. The Finnish banks studied in this research are Nordea and Danske Bank because they are the two largest banks operating in Finland and they both also have the right company form to able the calculations. To calculate the costs of halving their leverages this study used the Capital Asset Pricing Model. The halving of the leverage of Danske Bank raised its funding costs for 16—257 basis points depending on the method of assessment. For Nordea the increase in funding costs was 11—186 basis points when its leverage was halved. On the behalf of the results found in this study it can be said that the doubling of an equity ratio does not increase the funding costs of a bank one by one. Actually the increase is quite modest. More solvent banks would increase the stability of the banking industry enormously while the increase in funding costs is low. If the costs of bank regulation exceeds the increase in funding costs after the higher equity ratio, it can be thought that this is the better way of stabilizing the banking industry rather than heavy regulation.

THE COSTS OF RAISING EQUITY RATIO FOR BANKS Evidence from publicly listed banks operating in Finland

The solvency rate of banks differs from the other corporations. The equity rate of a bank is lower than it is in corporations of other field of business. However, functional banking industry has huge impact on the whole society. The equity rate of a bank needs to be higher because that makes the banking industry more stable as the probability of the banks going under will decrease. If a bank goes belly up, the government will be compensating the deposits since it has granted the bank’s depositors a deposit insurance. This means that the payment comes from the tax payers in the last resort. Economic conversation has long concentrated on the costs of raising equity ratio. It has been a common belief that raising equity ratio also increases the banks’ funding costs in the same phase and these costs will be redistributed to the banks customers as higher service charges. Regardless of the common belief, the actual reaction of the funding costs to the higher equity ratio has been studied only a little in Europe and no study has been constructed in Finland. Before it can be calculated whether the higher stability of the banking industry that is caused by the raise in equity levels compensates the extra costs in funding costs, it must be calculated how much the actual increase in the funding costs is. Currently the banking industry is controlled by complex and heavy regulation. To maintain such a complex system inflicts major costs in itself. This research leans on the Modigliani and Miller theory, which shows that the finance structure of a firm is irrelevant to their funding costs. In addition, this research follows the calculations of Miller, Yang ja Marcheggianon (2012) and Vale (2011) where they calculate the funding costs after the doubling of specific banks’ equity ratios. The Finnish banks studied in this research are Nordea and Danske Bank because they are the two largest banks operating in Finland and they both also have the right company form to able the calculations. To calculate the costs of halving their leverages this study used the Capital Asset Pricing Model. The halving of the leverage of Danske Bank raised its funding costs for 16—257 basis points depending on the method of assessment. For Nordea the increase in funding costs was 11—186 basis points when its leverage was halved. On the behalf of the results found in this study it can be said that the doubling of an equity ratio does not increase the funding costs of a bank one by one. Actually the increase is quite modest. More solvent banks would increase the stability of the banking industry enormously while the increase in funding costs is low. If the costs of bank regulation exceeds the increase in funding costs after the higher equity ratio, it can be thought that this is the better way of stabilizing the banking industry rather than heavy regulation.

Value-oriented process modeling : integrating financial perspectives into business process re-design

Purpose – Financial information about costs and return on investments are of key importance to strategic decision-making but also in the context of process improvement or business engineering. In this paper we propose a value-oriented approach to business process modeling based on key concepts and metrics from operations and financial management, to aid decision making in process re-design projects on the basis of process models. Design/methodology/approach – We suggest a theoretically founded extension to current process modeling approaches, and delineate a framework as well as methodical support to incorporate financial information into process re-design. We use two case studies to evaluate the suggested approach. Findings – Based on two case studies, we show that the value-oriented process modeling approach facilitates and improves managerial decision-making in the context of process re-design. Research limitations / implications – We present design work and two case studies. More research is needed to more thoroughly evaluate the presented approach in a variety of real-life process modeling settings. Practical implications – We show how our approach enables decision makers to make investment decisions in process re-design projects, and also how other decisions, for instance in the context of enterprise architecture design, can be facilitated. Originality/value – This study reports on an attempt to integrate financial considerations into the act of process modeling, in order to provide more comprehensive decision making support in process re-design projects.

Current rural valuation practice : a survey of valuers and agribusiness managers on farm management and sustainable rural land use

Over the past 20 years the nature of rural valuation practice has required most rural valuers to undertake studies in both agriculture (farm management) and valuation, especially if carrying out valuation work for financial institutions. The additional farm financial and management information obtained by rural valuers exceeds that level of information required to value commercial, retail and industrial by the capitalisation of net rent/profit valuation method and is very similar to the level of information required for the valuation of commercial and retail property by the Discounted Cash Flow valuation method. On this basis the valuers specialising in rural valuation practice have the necessary skills and information to value rural properties by an income valuation method, which can focus on the long term environmental and economic sustainability of the property being valued. This paper will review the results of an extensive survey carried out by rural property valuers in Australia, in relation to the impact of farm management on rural property values and sustainable rural land use. A particular focus of the research relates to the increased awareness of the problems of rural land degradation in Australia and the subsequent impact such problems have on the productivity of rural land. These problems of sustainable land use have resulted in the need to develop an approach to rural valuation practice that allows the valuer to factor the past management practices on the subject rural property into the actual valuation figure. An analysis of the past farm management and the inclusion of this data into the valuation methodology provides a much more reliable indication of farm sustainable economic value than the existing direct comparison valuation methodology.

From the cathedral to the classroom : the emergence of new discourses on religious education

In 2009, Religious Education is a designated key learning area in Catholic schools in the Archdiocese of Brisbane and, indeed, across Australia. Over the years, though, different conceptualisations of the nature and purpose of religious education have led to the construction of different approaches to the classroom teaching of religion. By investigating the development of religious education policy in the Archdiocese of Brisbane from 1984 to 2003, the study seeks to trace the emergence of new discourses on religious education. The study understands religious education to refer to a lifelong process that occurs through a variety of forms (Moran, 1989). In Catholic schools, it refers both to co-curricula activities, such as retreats and school liturgies, and the classroom teaching of religion. It is the policy framework for the classroom teaching of religion that this study explores. The research was undertaken using a policy case study approach to gain a detailed understanding of how new conceptualisations of religious education emerged at a particular site of policy production, in this case, the Archdiocese of Brisbane. The study draws upon Yeatman’s (1998) description of policy as occurring “when social actors think about what they are doing and why in relation to different and alternative possible futures” (p. 19) and views policy as consisting of more than texts themselves. Policy texts result from struggles over meaning (Taylor, 2004) in which specific discourses are mobilised to support particular views. The study has a particular interest in the analysis of Brisbane religious education policy texts, the discursive practices that surrounded them, and the contexts in which they arose. Policy texts are conceptualised in the study as representing “temporary settlements” (Gale, 1999). Such settlements are asymmetrical, temporary and dependent on context: asymmetrical in that dominant actors are favoured; temporary because dominant actors are always under challenge by other actors in the policy arena; and context - dependent because new situations require new settlements. To investigate the official policy documents, the study used Critical Discourse Analysis (hereafter referred to as CDA) as a research tool that affords the opportunity for researchers to map and chart the emergence of new discourses within the policy arena. As developed by Fairclough (2001), CDA is a three-dimensional application of critical analysis to language. In the Brisbane religious education arena, policy texts formed a genre chain (Fairclough, 2004; Taylor, 2004) which was a focus of the study. There are two features of texts that form genre chains: texts are systematically linked to one another; and, systematic relations of recontextualisation exist between the texts. Fairclough’s (2005) concepts of “imaginary space” and “frameworks for action” (p. 65) within the policy arena were applied to the Brisbane policy arena to investigate the relationship between policy statements and subsequent guidelines documents. Five key findings emerged from the study. First, application of CDA to policy documents revealed that a fundamental reconceptualisation of the nature and purpose of classroom religious education in Catholic schools occurred in the Brisbane policy arena over the last twenty-five years. Second, a disjuncture existed between catechetical discourses that continued to shape religious education policy statements, and educational discourses that increasingly shaped guidelines documents. Third, recontextualisation between policy documents was evident and dependent on the particular context in which religious education occurred. Fourth, at subsequent links in the chain, actors created their own “imaginary space”, thereby altering orders of discourse within the policy arena, with different actors being either foregrounded or marginalised. Fifth, intertextuality was more evident in the later links in the genre chain (i.e. 1994 policy statement and 1997 guidelines document) than in earlier documents. On the basis of the findings of the study, six recommendations are made. First, the institutional Church should carefully consider the contribution that the Catholic school can make to the overall pastoral mission of the diocese in twenty-first century Australia. Second, policymakers should articulate a nuanced understanding of the relationship between catechesis and education with regard to the religion classroom. Third, there should be greater awareness of the connections among policies relating to Catholic schools – especially the connection between enrolment policy and religious education policy. Fourth, there should be greater consistency between policy documents. Fifth, policy documents should be helpful for those to whom they are directed (i.e. Catholic schools, teachers). Sixth, “imaginary space” (Fairclough, 2005) in policy documents needs to be constructed in a way that allows for multiple “frameworks for action” (Fairclough, 2005) through recontextualisation. The findings of this study are significant in a number of ways. For religious educators, the study highlights the need to develop a shared understanding of the nature and purpose of classroom religious education. It argues that this understanding must take into account the multifaith nature of Australian society and the changing social composition of Catholic schools themselves. Greater recognition should be given to the contribution that religious studies courses such as Study of Religion make to the overall religious development of a person. In view of the social composition of Catholic schools, there is also an issue of ecclesiological significance concerning the conceptualisation of the relationship between the institutional Catholic Church and Catholic schools. Finally, the study is of significance because of its application of CDA to religious education policy documents. Use of CDA reveals the foregrounding, marginalising, or excluding of various actors in the policy arena.

NSW rural land performance : 1990-2008

The annual income return for rural property is based on two major factors being commodity prices and production yields. Commodity prices paid to rural producers can vary depending on the agricultural policies of their respective countries. Free trade countries, such as Australia and New Zealand are subject to the volatility of the world commodity markets to a greater extent than those farmers in protected or subsidised markets. In countries where rural production is protected or subsidised the annual income received by rural producers has been relatively stable. However, the high cost of agricultural protection is now being questioned, particularly in relation to the increasing economic costs of government services such as health, education and housing. When combined with the agricultural production limitations of climate, topography, chemical residues and disease issues, the impact of commodity prices on rural property income is crucial in the ability of rural producers to enter into or expand their holdings in agricultural land. These problems are then reflected in the volatility of the rural land capital returns and the investment performance of this property class. This paper will address the total and capital return performance of a major agricultural area and compare these returns on the basis of both location of land and land use. The comparison will be used to determine if location or actual land use has a greater influence on rural property capital returns. This performance analysis is based on over 35,000 rural sales transactions. These transactions cover all market based rural property transactions in New South Wales, Australia for the period January 1990 to December 2008. Correlation analysis and investment performance analysis has also been carried out to determine the possible relationships between location and land use and subsequent changes in rural land capital values.

Theoretical analysis of serrated chip formation based on ideal models in high speed cutting

In this paper, two ideal formation models of serrated chips, the symmetric formation model and the unilateral right-angle formation model, have been established for the first time. Based on the ideal models and related adiabatic shear theory of serrated chip formation, the theoretical relationship among average tooth pitch, average tooth height and chip thickness are obtained. Further, the theoretical relation of the passivation coefficient of chip's sawtooth and the chip thickness compression ratio is deduced as well. The comparison between these theoretical prediction curves and experimental data shows good agreement, which well validates the robustness of the ideal chip formation models and the correctness of the theoretical deducing analysis. The proposed ideal models may have provided a simple but effective theoretical basis for succeeding research on serrated chip morphology. Finally, the influences of most principal cutting factors on serrated chip formation are discussed on the basis of a series of finite element simulation results for practical advices of controlling serrated chips in engineering application.

Effect of heating rate on the crystal composition of ferroelectric lithium niobate crystallites

A series of lithium niobate powders were synthesized by the combustion method at different heating rates. The effect of heating rate on the crystal composition of lithium niobate powders was investigated by powder X-ray diffraction measurements. It has been found that the lithium content in the as-synthesized lithium niobate powders increases with decreasing the heating rate. On the basis of the existed structure-property relationship of lithium niobate single crystals, it was concluded that high quality lithium niobate powders can be effectively synthesized at a lower heating rate (in the range of 5-10 C/min) by the combustion method.

Properties of lignin and poly(hydroxybutyrate) blends

The Queensland University of Technology (QUT) allows the presentation of a thesis for the Degree of Doctor of Philosophy in the format of published or submitted papers, where such papers have been published, accepted or submitted during the period of candidature. This thesis is composed of Seven published/submitted papers and one poster presentation, of which five have been published and the other two are under review. This project is financially supported by the QUTPRA Grant. The twenty-first century started with the resurrection of lignocellulosic biomass as a potential substitute for petrochemicals. Petrochemicals, which enjoyed the sustainable economic growth during the past century, have begun to reach or have reached their peak. The world energy situation is complicated by political uncertainty and by the environmental impact associated with petrochemical import and usage. In particular, greenhouse gasses and toxic emissions produced by petrochemicals have been implicated as a significant cause of climate changes. Lignocellulosic biomass (e.g. sugarcane biomass and bagasse), which potentially enjoys a more abundant, widely distributed, and cost-effective resource base, can play an indispensible role in the paradigm transition from fossil-based to carbohydrate-based economy. Poly(3-hydroxybutyrate), PHB has attracted much commercial interest as a plastic and biodegradable material because some its physical properties are similar to those of polypropylene (PP), even though the two polymers have quite different chemical structures. PHB exhibits a high degree of crystallinity, has a high melting point of approximately 180°C, and most importantly, unlike PP, PHB is rapidly biodegradable. Two major factors which currently inhibit the widespread use of PHB are its high cost and poor mechanical properties. The production costs of PHB are significantly higher than for plastics produced from petrochemical resources (e.g. PP costs $US1 kg-1, whereas PHB costs $US8 kg-1), and its stiff and brittle nature makes processing difficult and impedes its ability to handle high impact. Lignin, together with cellulose and hemicellulose, are the three main components of every lignocellulosic biomass. It is a natural polymer occurring in the plant cell wall. Lignin, after cellulose, is the most abundant polymer in nature. It is extracted mainly as a by-product in the pulp and paper industry. Although, traditionally lignin is burnt in industry for energy, it has a lot of value-add properties. Lignin, which to date has not been exploited, is an amorphous polymer with hydrophobic behaviour. These make it a good candidate for blending with PHB and technically, blending can be a viable solution for price and reduction and enhance production properties. Theoretically, lignin and PHB affect the physiochemical properties of each other when they become miscible in a composite. A comprehensive study on structural, thermal, rheological and environmental properties of lignin/PHB blends together with neat lignin and PHB is the targeted scope of this thesis. An introduction to this research, including a description of the research problem, a literature review and an account of the research progress linking the research papers is presented in Chapter 1. In this research, lignin was obtained from bagasse through extraction with sodium hydroxide. A novel two-step pH precipitation procedure was used to recover soda lignin with the purity of 96.3 wt% from the black liquor (i.e. the spent sodium hydroxide solution). The precipitation process is presented in Chapter 2. A sequential solvent extraction process was used to fractionate the soda lignin into three fractions. These fractions, together with the soda lignin, were characterised to determine elemental composition, purity, carbohydrate content, molecular weight, and functional group content. The thermal properties of the lignins were also determined. The results are presented and discussed in Chapter 2. On the basis of the type and quantity of functional groups, attempts were made to identify potential applications for each of the individual lignins. As an addendum to the general section on the development of composite materials of lignin, which includes Chapters 1 and 2, studies on the kinetics of bagasse thermal degradation are presented in Appendix 1. The work showed that distinct stages of mass losses depend on residual sucrose. As the development of value-added products from lignin will improve the economics of cellulosic ethanol, a review on lignin applications, which included lignin/PHB composites, is presented in Appendix 2. Chapters 3, 4 and 5 are dedicated to investigations of the properties of soda lignin/PHB composites. Chapter 3 reports on the thermal stability and miscibility of the blends. Although the addition of soda lignin shifts the onset of PHB decomposition to lower temperatures, the lignin/PHB blends are thermally more stable over a wider temperature range. The results from the thermal study also indicated that blends containing up to 40 wt% soda lignin were miscible. The Tg data for these blends fitted nicely to the Gordon-Taylor and Kwei models. Fourier transform infrared spectroscopy (FT-IR) evaluation showed that the miscibility of the blends was because of specific hydrogen bonding (and similar interactions) between reactive phenolic hydroxyl groups of lignin and the carbonyl group of PHB. The thermophysical and rheological properties of soda lignin/PHB blends are presented in Chapter 4. In this chapter, the kinetics of thermal degradation of the blends is studied using thermogravimetric analysis (TGA). This preliminary investigation is limited to the processing temperature of blend manufacturing. Of significance in the study, is the drop in the apparent energy of activation, Ea from 112 kJmol-1 for pure PHB to half that value for blends. This means that the addition of lignin to PHB reduces the thermal stability of PHB, and that the comparative reduced weight loss observed in the TGA data is associated with the slower rate of lignin degradation in the composite. The Tg of PHB, as well as its melting temperature, melting enthalpy, crystallinity and melting point decrease with increase in lignin content. Results from the rheological investigation showed that at low lignin content (.30 wt%), lignin acts as a plasticiser for PHB, while at high lignin content it acts as a filler. Chapter 5 is dedicated to the environmental study of soda lignin/PHB blends. The biodegradability of lignin/PHB blends is compared to that of PHB using the standard soil burial test. To obtain acceptable biodegradation data, samples were buried for 12 months under controlled conditions. Gravimetric analysis, TGA, optical microscopy, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), FT-IR, and X-ray photoelectron spectroscopy (XPS) were used in the study. The results clearly demonstrated that lignin retards the biodegradation of PHB, and that the miscible blends were more resistant to degradation compared to the immiscible blends. To obtain an understanding between the structure of lignin and the properties of the blends, a methanol-soluble lignin, which contains 3× less phenolic hydroxyl group that its parent soda lignin used in preparing blends for the work reported in Chapters 3 and 4, was blended with PHB and the properties of the blends investigated. The results are reported in Chapter 6. At up to 40 wt% methanolsoluble lignin, the experimental data fitted the Gordon-Taylor and Kwei models, similar to the results obtained soda lignin-based blends. However, the values obtained for the interactive parameters for the methanol-soluble lignin blends were slightly lower than the blends obtained with soda lignin indicating weaker association between methanol-soluble lignin and PHB. FT-IR data confirmed that hydrogen bonding is the main interactive force between the reactive functional groups of lignin and the carbonyl group of PHB. In summary, the structural differences existing between the two lignins did not manifest itself in the properties of their blends.

Incentivising private health insurance through the income tax regime : Capitalising on behavioural models

The Australian income tax regime is generally regarded as a mechanism by which the Federal Government raises revenue, with much of the revenue raised used to support public spending programs. A prime example of this type of spending program is health care. However, a government may also decide that the private sector should provide a greater share of the nation's health care. To achieve such a policy it can bring about change through positive regulation, or it can use the taxation regime, via tax expenditures, not to raise revenue but to steer or influence individuals in its desired direction. When used for this purpose, tax expenditures steer taxpayers towards or away from certain behaviour by either imposing costs on, or providing benefits to them. Within the context of the health sector, the Australian Federal Government deploys social steering via the tax system, with the Medicare Levy Surcharge and the 30 percent Private Health Insurance Rebate intended to steer taxpayer behaviour towards the Government’s policy goal of increasing the amount of health provision through the private sector. These steering mechanisms are complemented by the ‘Lifetime Health Cover Initiative’. This article, through the lens of behavioural economics, considers the ways in which these assorted mechanisms might have been expected to operate and whether they encourage individuals to purchase private health insurance.