Work and health : remodelling perspectives of working life research, as proposed by Järvholm et al. (2009)

Järvholm and Co-workers (2009) proposed a conceptual model for research on working life. Models are powerful communication and decision tools. This model is strongly unidirectional and does not cover the mentioned interactions in the arguments.With help of a genealogy of work and of health it is shown that work and health are interactive and have to be analysed on the background of society.Key words: research model, work, health, occupational health, society, interaction, discussion paperRemodellierung der von Järvholm et al. (2009) vorgeschlagenen Forschungsperspektiven in Arbeit und GesundheitJärvholm und Kollegen stellten 2009 ein konzeptionelles Modell für die Forschung im Bereich Arbeit und Gesundheit vor. Modelle stellen kraftvolle Kommunikations- und Entscheidungsinstrumente dar. Die Einflussfaktoren im Modell verlaufen jedoch nur in einer Richtung und bilden die interaktiven Argumente im Text nicht ab. Mit Hilfe einer Genealogie der Begriffe Arbeit und Gesundheit wird aufgezeigt, dass Arbeit und Gesundheit sich gegenseitig beeinflussen und nur vor dem Hintergrund der jeweiligen gesellschaftlichen Kontextfaktoren zu analysieren sind.Introduction : After an interesting introduction about the objectives of research on working life, Järvholm and Co-workers (2009) manage to define a conceptual model for working life research out of a small survey of Occupational Safety and Health (OSH) definitions. The strong point of their model is the entity 'working life' including personal development, as well as career paths and aging. Yet, the model Järvholm et al. (2009) propose is strangely unidirectional; the arrows point from the population to working life, from there to health and to disease, as well as to productivity and economic resources. The diagram only shows one feed-back loop: between economic resources and health. We all know that having a chronic disease condition influences work and working capacity. Economic resources have a strong influence on work, too. Having personal economic resources will influence the kind of work someone accepts and facilitate access to continuous professional education. A third observation is that society is not present in the model, although this is less the case in the arguments. In fact, there is an incomprehensible gap between the arguments brought forth by Järvholm and co-workers and their reductionist model.Switzerland has a very low coverage of occupational health specialists. Switzerland is a long way from fulfilling the WHO's recommendations on workers' access to OSH services as described in its Global plan of action. The Institute for Work and Health (IST) in Lausanne is the only organisation which covers the major domains of OSH research that are occupational medicine, occupational hygiene, ergonomic and psychosocial research. As the country's sole occupational health institution we are forced to reflect the objectives of working life research so as not to waste the scare resources available.I will set out below a much shortened genealogy of work and of health, with the aim of extending Järvholm et al's (2009) analyses on the perspectives of working life research in two directions. Firstly towards the interactive nature of work and health and the integration of society, and secondly towards the question of what working life means or where working life could be situated.Work, as we know it today - paid work regulated by a contract as the basis for sustaining life and as a base for social rights - was born in modern era. Therefore I will start my genealogy in the pre-modern era, focus on the important changes that occurred during industrial revolution and the modern era and end in 2010 taking into account the enormous transformations of the past 20-30 years. I will put aside some 810 years of advances in science and technology that have expanded the world's limits and human understanding, and restrict my genealogy to work and to health/body implicating also the societal realm. [Author]

Gene finding in the chicken genome.

BACKGROUND: Despite the continuous production of genome sequence for a number of organisms, reliable, comprehensive, and cost effective gene prediction remains problematic. This is particularly true for genomes for which there is not a large collection of known gene sequences, such as the recently published chicken genome. We used the chicken sequence to test comparative and homology-based gene-finding methods followed by experimental validation as an effective genome annotation method. RESULTS: We performed experimental evaluation by RT-PCR of three different computational gene finders, Ensembl, SGP2 and TWINSCAN, applied to the chicken genome. A Venn diagram was computed and each component of it was evaluated. The results showed that de novo comparative methods can identify up to about 700 chicken genes with no previous evidence of expression, and can correctly extend about 40% of homology-based predictions at the 5' end. CONCLUSIONS: De novo comparative gene prediction followed by experimental verification is effective at enhancing the annotation of the newly sequenced genomes provided by standard homology-based methods.

Chromosomal number aberrations and transformation in adult mouse retinal stem cells in vitro.

PURPOSE: The potential of stem cells (SCs) as a source for cell-based therapy on a wide range of degenerative diseases and damaged tissues such as retinal degeneration has been recognized. Generation of a high number of retinal stem cells (RSCs) in vitro would thus be beneficial for transplantation in the retina. However, as cells in prolonged cultivation may be unstable and thus have a risk of transformation, it is important to assess the stability of these cells. METHODS: Chromosomal aberrations were analyzed in mouse RSC lines isolated from adult and from postnatal day (PN)1 mouse retinas. Moreover, selected cell lines were tested for anchorage-dependent proliferation, and SCs were transplanted into immunocompromised mice to assess the possibility of transformation. RESULTS: Marked aneuploidy occurred in all adult cell lines, albeit to different degrees, and neonatal RSCs were the most stable and displayed a normal karyotype until at least passage 9. Of interest, the level of aneuploidy of adult RSCs did not necessarily correlate with cell transformation. Only the adult RSC lines passaged for longer periods and with a higher dilution ratio underwent transformation. Furthermore, we identified several cell cycle proteins that might support the continuous proliferation and transformation of the cells. CONCLUSIONS: Adult RSCs rapidly accumulated severe chromosomal aberrations during cultivation, which led to cell transformation in some cell lines. The culture condition plays an important role in supporting the selection and growth of transformed cells.

Human endometrial carcinomas serially transplanted in nude mice and established in continuous cell lines.

Three out of five human endometrial carcinomas were successfully grafted into nude mice (BALB/c/nu/nu). Two of these tumors could be maintained by serial transplantation. The morphological characteristics displayed by the grafted tumors were comparable to those of the original carcinomas. Permanent cell lines were established from these two tumors. Reinjection of cells grown in vitro into nude mice produced nodules of identical histology as compared to original solid transplants. The influence of medroxyprogesterone acetate on tumor growth in vivo and cell proliferation in vitro was studied. This hormonal treatment did not produce any significant effect on tumor cells, either in vitro or in vivo, for the two endometrial carcinomas. After medroxyprogesterone administration, a slight but non-significant growth inhibition of the tumor cells in vitro was observed and the tumor transplants in vivo did not appear to be influenced. The experiments illustrate the possible use of this model for testing potential anti-cancer agents.

Avalanche dynamics of fiber bundle models

We present a detailed analytical and numerical study of the avalanche distributions of the continuous damage fiber bundle model CDFBM . Linearly elastic fibers undergo a series of partial failure events which give rise to a gradual degradation of their stiffness. We show that the model reproduces a wide range of mechanical behaviors. We find that macroscopic hardening and plastic responses are characterized by avalanche distributions, which exhibit an algebraic decay with exponents between 5/2 and 2 different from those observed in mean-field fiber bundle models. We also derive analytically the phase diagram of a family of CDFBM which covers a large variety of potential avalanche size distributions. Our results provide a unified view of the statistics of breaking avalanches in fiber bundle models

Gene finding in the chicken genome

Background: Despite the continuous production of genome sequence for a number of organisms,reliable, comprehensive, and cost effective gene prediction remains problematic. This is particularlytrue for genomes for which there is not a large collection of known gene sequences, such as therecently published chicken genome. We used the chicken sequence to test comparative andhomology-based gene-finding methods followed by experimental validation as an effective genomeannotation method.Results: We performed experimental evaluation by RT-PCR of three different computational genefinders, Ensembl, SGP2 and TWINSCAN, applied to the chicken genome. A Venn diagram wascomputed and each component of it was evaluated. The results showed that de novo comparativemethods can identify up to about 700 chicken genes with no previous evidence of expression, andcan correctly extend about 40% of homology-based predictions at the 5' end.Conclusions: De novo comparative gene prediction followed by experimental verification iseffective at enhancing the annotation of the newly sequenced genomes provided by standardhomology-based methods.

Diluted three-dimensional random field Ising model at zero temperature with metastable dynamics.

The influence of vacancy concentration on the behavior of the three-dimensional random field Ising model with metastable dynamics is studied. We have focused our analysis on the number of spanning avalanches which allows us a clear determination of the critical line where the hysteresis loops change from continuous to discontinuous. By a detailed finite-size scaling analysis we determine the phase diagram and numerically estimate the critical exponents along the whole critical line. Finally, we discuss the origin of the curvature of the critical line at high vacancy concentration.

Binding energy and momentum distribution of nuclear matter using Green's functions methods

The influence of hole-hole (h-h) propagation in addition to the conventional particle-particle (p-p) propagation, on the energy per particle and the momentum distribution is investigated for the v2 central interaction which is derived from Reid¿s soft-core potential. The results are compared to Brueckner-Hartree-Fock calculations with a continuous choice for the single-particle (SP) spectrum. Calculation of the energy from a self-consistently determined SP spectrum leads to a lower saturation density. This result is not corroborated by calculating the energy from the hole spectral function, which is, however, not self-consistent. A generalization of previous calculations of the momentum distribution, based on a Goldstone diagram expansion, is introduced that allows the inclusion of h-h contributions to all orders. From this result an alternative calculation of the kinetic energy is obtained. In addition, a direct calculation of the potential energy is presented which is obtained from a solution of the ladder equation containing p-p and h-h propagation to all orders. These results can be considered as the contributions of selected Goldstone diagrams (including p-p and h-h terms on the same footing) to the kinetic and potential energy in which the SP energy is given by the quasiparticle energy. The results for the summation of Goldstone diagrams leads to a different momentum distribution than the one obtained from integrating the hole spectral function which in general gives less depletion of the Fermi sea. Various arguments, based partly on the results that are obtained, are put forward that a self-consistent determination of the spectral functions including the p-p and h-h ladder contributions (using a realistic interaction) will shed light on the question of nuclear saturation at a nonrelativistic level that is consistent with the observed depletion of SP orbitals in finite nuclei.

Accuracy in the experimental calorimetric study of the crystallization kinetics and predicitve transformation diagrams: Application to a Ga-Te amorphous alloy

The uncertainties inherent to experimental differential scanning calorimetric data are evaluated. A new procedure is developed to perform the kinetic analysis of continuous heating calorimetric data when the heat capacity of the sample changes during the crystallization. The accuracy of isothermal calorimetric data is analyzed in terms of the peak-to-peak noise of the calorimetric signal and base line drift typical of differential scanning calorimetry equipment. Their influence in the evaluation of the kinetic parameters is discussed. An empirical construction of the time-temperature and temperature heating rate transformation diagrams, grounded on the kinetic parameters, is presented. The method is applied to the kinetic study of the primary crystallization of Te in an amorphous alloy of nominal composition Ga20Te80, obtained by rapid solidification.

The differentiable chain functor is not homotopy equivalent to the continuous chain functor

Let $S_*$ and $S_*^\{infty}$ be the functors of continuous and differentiable singular chains on the category of differentiable manifolds. We prove that the natural transformation $i: S_*^\infty \rightarrow S_*$, which induces homology equivalences over each manifold, is not a natural homotopy equivalence.

Monotonic continuous-time random walks with drift and stochastic reset events

In this paper we consider a stochastic process that may experience random reset events which suddenly bring the system to the starting value and analyze the relevant statistical magnitudes. We focus our attention on monotonic continuous-time random walks with a constant drift: The process increases between the reset events, either by the effect of the random jumps, or by the action of the deterministic drift. As a result of all these combined factors interesting properties emerge, like the existence (for any drift strength) of a stationary transition probability density function, or the faculty of the model to reproduce power-law-like behavior. General formulas for two extreme statistics, the survival probability, and the mean exit time, are also derived. To corroborate in an independent way the results of the paper, Monte Carlo methods were used. These numerical estimations are in full agreement with the analytical predictions.

Voimalaitoksen BoP-järjestelmien prosessikaavioiden ja -kuvausten suunnitteluohjeistus

Tässä työssä luodaan voimalaitoksen BoP- järjestelmien prosessikaavioiden- ja kuvausten suunnitteluohjeistus Sweco Industy Oy:n energia-yksikölle. BoP- järjestelmiin lukeutuvat tässä kaikki oleellisimmat voimalaitoksen apujärjestelmät kuten esimerkiksi suljettu jäähdytysvesipiiri. Tämä työ on tehty erään Keski-Euroopan alueella sijaitsevan voimalaitosprojektin yhteydessä ja tämä ohjeistus toimii pohjatietona myöhemmin tehtäville täydennyksille. Työn alkuosassa esitellään käytössä oleva piirto-ohjelma sekä sovellettava standardi KKS ja sen käyttö. Käytetyt kaaviotyypit ja niiden sisältö käydään pääpiirteissään läpi. Pääpaino työssä on PI-kaavioiden suunnittelemisen ja piirtämisen ohjeistaminen ja yhdenmukaistaminen. Piirtämiseen ja kaavioiden esittämiseen on kerätty olemassa olevaa tietoa eri suunnittelijoilta joiden avulla on valittu käyttöön tuleva esitystapa. Työn aikana ilmeni ongelmia prosessikaavioiden piirto-ohjelman kanssa. Piirto-ohjelmana käytetty Comos on vielä kehitysvaiheessa ja sen tietokannan ja toiminnan muokkaaminen yhtiön tarpeita vastaavaksi tulee viemään vielä aikaa. Tämä onkin tulevaisuutta ajatellen tärkein kehityskohde.

Regression analysis of compositional data when both the dependent variable and independent variable are components

It is well known that regression analyses involving compositional data need special attention because the data are not of full rank. For a regression analysis where both the dependent and independent variable are components we propose a transformation of the components emphasizing their role as dependent and independent variables. A simple linear regression can be performed on the transformed components. The regression line can be depicted in a ternary diagram facilitating the interpretation of the analysis in terms of components. An exemple with time-budgets illustrates the method and the graphical features

Combined application of continuous wavelet transform-zero crossing technique in the simultaneous spectrophotometric determination of perindopril and indapamid in tablets

Signal processing methods based on the combined use of the continuous wavelet transform (CWT) and zero-crossing technique were applied to the simultaneous spectrophotometric determination of perindopril (PER) and indapamide (IND) in tablets. These signal processing methods do not require any priory separation step. Initially, various wavelet families were tested to identify the optimum signal processing giving the best recovery results. From this procedure, the Haar and Biorthogonal1.5 continuous wavelet transform (HAAR-CWT and BIOR1.5-CWT, respectively) were found suitable for the analysis of the related compounds. After transformation of the absorbance vectors by using HAAR-CWT and BIOR1.5-CWT, the CWT-coefficients were drawn as a graph versus wavelength and then the HAAR-CWT and BIOR1.5-CWT spectra were obtained. Calibration graphs for PER and IND were obtained by measuring the CWT amplitudes at 231.1 and 291.0 nm in the HAAR-CWT spectra and at 228.5 and 246.8 nm in BIOR1.5-CWT spectra, respectively. In order to compare the performance of HAAR-CWT and BIOR1.5-CWT approaches, derivative spectrophotometric (DS) method and HPLC as comparison methods, were applied to the PER-IND samples. In this DS method, first derivative absorbance values at 221.6 for PER and 282.7 nm for IND were used to obtain the calibration graphs. The validation of the CWT and DS signal processing methods was carried out by using the recovery study and standard addition technique. In the following step, these methods were successfully applied to the commercial tablets containing PER and IND compounds and good accuracy and precision were reported for the experimental results obtained by all proposed signal processing methods.

DESENVOLVIMENTO DE UMA TÉCNICA ULTRASSÔNICA PARA AVALIAR TEORES DE ÓLEO E GRAXA EM EFLUENTES DE BIOCOMBUSTÍVEIS

Ultrasound as a metrology tool has many applications in health care, industrial, and chemical analyses. Ultrasonic techniques are rapid, low-cost, non-invasive, and highly repeatable. Although ultrasound can be used to measure emulsions, no effort had been made thus far to optimize its sensitivity for metrological analysis. In this work, a technique for analyzing oil in water was validated. The wave velocity and attenuation were chosen as the ultrasonic parameters. The technique was implemented in the boundary region established by law for effluents from industrial plants involved with biofuel manufacturing. A technical effort of this study was to establish stable emulsions in concentrations close to the desired limit of study. The phase behaviours of pseudo-ternary oil, sodium chloride, and sodium lauryl sulphate were studied. The composition in the widest region of the diagram allowed for the formation of a stable emulsion, from which the ultrasound measurement was carried out. An analytical curve was obtained using ultrasonic attenuation to determine the content of oils and greases in wastewater ranging 15–240 ppm. The speed of sound did not appear to be an applicable parameter for this application. The technique was demonstrated to be an important alternative solution for the continuous monitoring of wastewater with regard to oil concentrations.