The timing of solid introduction in an ‘obesogenic’ environment : a narrative review of the evidence and methodological issues.

Objective To evaluate the evidence for association between obesity risk outcomes >12 months of age and timing of solid introduction in healthy term infants in developed countries, the large majority of whom are not exclusively breastfed to 6 months of age. Methods Studies included were published 1990-March 2013. Results Twenty-six papers with weight status or obesity prevalence outcomes were identified. Studies were predominantly cohort design, most with important methodological limitations. Ten studies reported a positive association. Of these only two were large good quality studies and both examined the outcome of early (<4 months) solid introduction. None of the four good quality studies that directly evaluated current guidelines provided evidence of any clinically relevant protective effect of solid introduction from 4-5 versus ≥ 6 months of age. Conclusion Overall the introduction of solids prior to 4 months may result in increased risk of childhood obesity but there is little evidence of adverse weight status outcomes associated with introducing solids at 4-6 rather than at 6 months. Implications More and better quality evidence is required to inform guidelines on the ‘when, what and how’ of complementary feeding.

Comparison of two pressurisers for cementation of the proximal femur

PURPOSE: To compare pressures generated by 2 different cement pressurisers at various locations in the proximal femur. METHODS: Two groups of 5 synthetic femurs were used, and 6 pressure sensors were placed in the femur at 20-mm intervals proximally to distally. Cement was filled into the femoral canal retrogradely using a cement gun with either the half-moon pressuriser or the femoral canal pressuriser. Maximum pressures and pressure time integrals (cumulative pressure over time) of the 2 pressurisers were compared. RESULTS: At all sensors, the half-moon pressuriser produced higher maximum pressures and pressure time integrals than the femoral canal pressuriser, but the difference was significant only at sensor 1 (proximal femur). This may result in reduced cement interdigitation in the proximal femur. CONCLUSION: The half-moon pressuriser produced higher maximum cementation pressures and pressure time integrals than the femoral canal pressuriser in the proximal femur region, which is critical for rotational stability of the implant and prevention of implant fracture. KEYWORDS: arthroplasty, replacement, hip; bone cements; femur

Localization of feeding of Anomalococcus indicus (Hemiptera: Lecanodiaspididae) and supplementary biological notes: Towards the biological management of the invasive tree Vachellia nilotica indica (Fabales: Mimosoideae) in North-Eastern Australia

. Management of the invasive Vachellia nilotica indica infesting tropical grasslands of Northern Australia has remained unsuccessful to date. Presently Anomalococcus indicus is considered a potential agent in the biological management of V. n. indica. Whereas generic biological details of A. indicus have been known, their feeding activity and details of their mouthparts and the sensory structures that are associated with their feeding action are not known. This paper provides details of those gaps. Nymphal instars I and II feed on cortical-parenchyma cells of young stems of V. n. indica, whereas nymphal instars III and adult females feed on phloem elements of older shoots. Nymphal instars and adults (females) trigger stress symptoms in the feeding tissue with cells bearing enlarged and disfigured nuclei, cytoplasmic shrinkage, cytoplasmic trabeculae, abnormal protuberances and uneven cell wall thickening, unusual cell membrane proliferation, and exhausted and necrosed cells. Continuous nutrient extraction by A. indicus can cause stem death. We provide evidence that A. indicus, by virtue of its continuous feeding activity and intense population build up, can be an effective biological-management agent to regulate populations of V. n. indica in infested areas. © 2014 © 2014 Société entomologique de France.

The dopamine-mediation of perception hypothesis and the implications for schizophrenia

- Background Following Kapur’s hypothesis [1] that schizophrenia is the intensification of phenomenological experience caused by the upregulation of dopamine, a survey of observed dopamine responses to phenomenal information was conducted. - Method An integrative study. - Results When considered in the light of the ecological theory of perception (ETP) [2] and global workspace theory (GBT) [3] Kapur’s hypothesis makes sense: Both the ETP and the GBT require an agent to attribute salience to perceptual information in order to filter an infinite array of available information and usefully sort information by importance. Dopamine may be the primary agent for this purpose. Thus perception itself is suspected as being a dopamine-mediated, and the symptoms and signs of schizophrenia may therefore be the result of dopamine dysfunction. - Conclusions The application of both ETP and GBT to the dopamine hypothesis gives the hypothesis a much-needed causal mechanism and the confl uence of these theories also provides ETP with a neurological perceptual fi lter. This paper provides a compelling model for schizophrenia; a hypothesis that ties perceptual theory to Kapur ’ s concept of dopamine-mediated salience.

Kinetic evolution studies of silver nanoparticles in a bio-based green synthesis process

Silver nanoparticles are being extensively studied due to their widespread applications and unique properties. In the present study, the growth kinetics of silver nanoparticles as synthesized on reduction of silver nitrate solution by aqueous extract of Azadirachta indica leaves was investigated. The formation of silver nanoparticles was preliminarily monitored by measuring the absorption maxima at different time intervals after adding the reducing agent to the silver salt solution (0.5, 1, 1.5, 2, 2.5, 3, 3.5 and 4 h). At different time points characterization studies were conducted using X-ray diffraction studies, FT-IR techniques, zeta potential studies and transmission electron microscopy. The total available silver in the reaction medium was determined at different durations using ICP-OES. The changes in reduction potential in the medium were also monitored using potentiometric analysis. The results confirm a definite change in the medium pertaining to formation of the stable nanoparticles after 2 h, and a significant increase in the agglomeration tendency after 4 h of interaction. The growth kinetic data of the nanoparticles till 3.5 h was found to fit the LSW model confirming diffusion limited growth. (C) 2011 Elsevier B.V. All rights reserved.

Effects of surface treatments and size of fly ash particles on the compressive properties of epoxy based particulate composites

Particulate reinforcements for polymers are selected with dual objective of improving composite properties and save on the total cost of the system. In the present study fly ash, an industrial waste with good properties is used as filler in epoxy and the compressive properties of such composites are studied. Particle surfaces are treated chemically using a silane-coupling agent to improve the compatibility with the matrix. The compressive properties of these are compared with those made of untreated fly ash particulates. Furthermore properties of fly ash composites with two different average particle sizes are first compared between themselves and then with those made using the as-received bimodal nature of particle size distribution. Microscopic observations of compression tested samples revealed a better adherence of the particles with the matrix in case of treated particles and regards the size effect the composites with lower average particle size showed improved strength at higher filler contents. Experimental values of strengths and modulii are compared with some of the theoretical models for composite properties. (C) 2002 Kluwer Academic Publishers.

Synthesis and structural characterization of two-dimensional hierarchical covellite nano-structures

We report a simple, template free and low-temperature hydrothermal reaction pathway using Cu(II) - thiourea complex (prepared in situ from copper (II) chloride and thiourea as precursors) and citric acid as complexing agent to synthesize two-dimensional hierarchical nano-structures of covellite (CuS). The product was characterized with the help of X-ray powder diffraction (XRD), scanning electron microscopy (SEM), energy dispersive analysis of X-ray spectroscopy (EDAX) and X-ray photoelectron spectroscopy (XPS). The concentration of citric acid in the hydrothermal precursor solution was seen to have a profound effect on the nanostructure of the product generated. Based on the outcoming product nano-architecture at different concentration of the ionic surfactant in the hydrothermal precursor solution a possible mechanism suited for reaction and further nucleation is also discussed. (C) 2012 Elsevier B.V. All rights reserved.

Digestive ripening: a synthetic method par excellence for core-shell, alloy, and composite nanostructured materials

The solvated metal atom dispersion (SMAD) method has been used for the synthesis of colloids of metal nanoparticles. It is a top-down approach involving condensation of metal atoms in low temperature solvent matrices in a SMAD reactor maintained at 77 K. Warming of the matrix results in a slurry of metal atoms that interact with one another to form particles that grow in size. The organic solvent solvates the particles and acts as a weak capping agent to halt/slow down the growth process to a certain extent. This as-prepared colloid consists of metal nanoparticles that are quite polydisperse. In a process termed as digestive ripening, addition of a capping agent to the as-prepared colloid which is polydisperse renders it highly monodisperse either under ambient or thermal conditions. In this, as yet not well-understood process, smaller particles grow and the larger ones diminish in size until the system attains uniformity in size and a dynamic equilibrium is established. Using the SMAD method in combination with digestive ripening process, highly monodisperse metal, core-shell, alloy, and composite nanoparticles have been synthesized. This article is a review of our contributions together with some literature reports on this methodology to realize various nanostructured materials.

Formal Synthesis of Actin Binding Macrolide Rhizopodin

Formal synthesis, of an actin binding macrolide rhizopodin was achieved in 19 longest linear steps. The key features of the synthesis include a stereoselective Mukaiyama aldol reaction, dual role of a Nagao auxiliary (first, as a chiral auxiliary of choice for installing hydroxy centers and, later, as an acylating agent to form an amide bond with an amino alcohol), late stage oxazole formation, and Stille coupling reactions.

A self-assembling polycationic nanocarrier that exhibits exceptional gene transfection efficiency

The lack of an efficient and safe carrier is a major impediment in the field of gene therapy. Although gelatin (GT), a naturally derived polymer, is widely used in drug delivery applications, it is unable to bind DNA efficiently. In this study, a novel polycationic gene carrier was prepared by conjugation of low molecular weight polyethyleneimine (LPEI) with GT through 4-bromonaphthaleic anhydride as a coupling agent to avoid self crosslinking. Self-assembly of LPEI conjugated GT (GT-LPEI) with plasmid DNA (pDNA) yielded nanoparticles with high gene complexation ability to form similar to 250 nm cylindrical nanoparticles with a zeta potential of similar to 27 mV. GT-LPEI showed exceptionally high transfection efficiency (> 90%) in various mammalian cells including primary stem cells with minimal cytotoxicity. The transfection efficiency of GT-LPEI significantly surpassed that of many commercial reagents. The high gene transfection expression was confirmed in vivo. Thus, GT-LPEI is shown to be a promising nonviral carrier for potential use in gene therapy.

Teología y ciencia en la obra de Santo Tomás de Aquino

El propósito de este artículo es indagar en el diálogo entre la teología y la ciencia, que encuentra a la Iglesia Católica entre sus protagonistas más destacados. Luego de algunas aclaraciones contextualizadoras, el autor introduce la cuestión de “lo científico” en la Edad Media y de cómo Santo Tomás se relaciona con ello, sobre todo en su consideración de la filosofía aristotélica. En un segundo momento, se realiza un recorrido por los testimonios más interesantes de la obra tomasiana sobre la conexión entre teología y ciencia, que evidencian una actitud “razonablemente equilibrada” con respecto al aporte de la ciencia para el conocimiento teológico: la fe no puede renunciar a la razón.

A Model of Evolutionay Drift

Drift appears to be crucial to study the stability properties of Nash equilibria in a component specifying different out-of-equilibrium behaviour. We propose a new microeconomic model of drift to be added to the learning process by which agents find their way to equilibrium. A key feature of the model is the sensitivity of the noisy agent to the proportion of agents in his player population playing the same strategy as his current one. We show that, 1. Perturbed Payoff-Positive and PayoffMonotone selection dynamics are capable of stabilizing pure non strict Nash equilibria in either singleton or nonsingleton component of equilibria; 2. The model is relevant to understand the role of drift in the behaviour observed in the laboratory for the Ultimatum Game and for predicting outcomes that can be experimentally tested. Hence, the selection dynamics model perturbed with the proposed drift may be seen as well as a new learning tool to understand observed behaviour.

Der PAH-Metabolit 1-Hydroxypyren in der Galle von Klieschen (Limanda limanda) aus Nord- und Ostsee

Due to their carcinogenic properties, polycyclic aromatic hydrocarbons (PAH) are important environmental contaminants which may lead to increased levels of neoplastic aberrations in fish liver. To measure the PAH contamination of fish, concentrations of PAH metabolites were determined in the bile. The main metabolite 1-hydroxypyrene was determined in concentrations from < 0.8 to 189 ng/ml in bile of dab caught in the North Sea and the Baltic Sea re-spectively. The concentrations are comparable to levels of 1-hydroxypyrene measured in cod and herring from the Baltic Sea. The highest concentrations in dab bile were measured in fish from the inner German Bight and the Kiel Bight.

Bestimmung der Begriffe Gesamtfang, Fang, Beifang und Rückwürfe

Due to the increasing environmental awareness of the public, marine environmental protection became a general interest. Since fishery is one of the strongest direct influences of man on the marine ecosystem, it became criticised, especially because of the discarding of unused fish, which is considered as a waste of the resource. In the different types of fisheries the calculation of the amounts of discards in relationship to the landings vary strongly. One of the reasons is, however, the different use of the terms 'bycatch' and 'discard'. Thus it is important to work with equal terms and definitions, so that fishermen, protectionists and ecologists talk the same language. This contribution tries to define the following terms achieving a generally acceptable terminology which is also explained by the attached diagram.

Validação do processo de limpeza de tanque multiuso utilizado para formulação de vacinas

A validação de limpeza de equipamentos é requisito regulatório para assegurar que os procedimentos de limpeza removem os resíduos de produto e agente de limpeza existentes até um nível de aceitação pré-determinado, garantindo que não haja contaminação cruzada. A metodologia analítica escolhida para monitorar a ocorrência de contaminação cruzada foi a determinação de carbono orgânico total (TOC) por ser uma técnica não específica permitindo assim quantificar os resíduos antes e após o procedimento de limpeza. Para execução desta validação foi selecionado o pior caso em relação ao contaminante. A vacina Hib foi escolhida como pior caso, pois possui maior aderência ao aço inox 316L, apresentando uma menor percentagem de recuperação, quando comparada à vacina Meningite A e C, sendo respectivamente de 93,0% e 98,4% para o tempo de extração de 30 segundos e 67,8% e 72,6% para o tempo de extração de 10 segundos. O resíduo aceitável de produto em água de rinsagem foi de 0,0007 g/mL de polissacarídeo (0,49 g/mL de TOC) e em swab foi de 0,006 g/mL de polissacarídeo (3,49 g/mL de TOC). As amostras retiradas para determinação de resíduo de produto foram analisadas e corrigidas pelo fator de recuperação deste resíduo para amostras de água de rinsagem que é de 98,5% e para amostras em swab que é de 98,4%. Já o resíduo aceitável para agente de limpeza (NaOH) foi de 3,5 g/mL que fornece um pH de 9,94, porém não existem evidências que a concentração calculada de resíduo de NaOH não interferirá quimicamente ao entrar em contato com a vacina. Assim o critério adotado foi o mesmo da água para injetáveis, segundo USP que é pH entre 5 e 7. As amostras retiradas para determinação de resíduo de agente de limpeza não foram corrigidas pelo fator de recuperação uma vez que o critério utilizado é muito mais crítico que o calculado. Todas as análises realizadas apresentaram resultados dentro dos parâmetros aceitáveis permitindo a conclusão de que o procedimento de limpeza para tanque de aço inox 316L é eficiente removendo os resíduos até níveis aceitáveis, evitando assim uma contaminação cruzada