Unsteady Attachment Line Flow On A Flat-Plate With Attached Cylinder

The unsteady laminar incompressible boundary-layer attachment-line flow on a flat plate with attached cylinder with heat and mass transfer has been studied when the free stream velocity, mass transfer and surface wall temperature vary arbitrarily with time. The governing partial differential equations with three independent variables have been solved numerically using an implicit finite-difference scheme. The heat transfer was found to be strongly dependent on the Prandtl number, variation of wall temperature with time and dissipation parameter (for large times). However, the free stream velocity distribution and mass transfer affect both the heat transfer and skin friction.

Approaching Sacred Pregnancy : The Cult of the Visitation and Narrative Altarpieces in Late Fifteenth-Century Florence

The study focuses on the Visitation as a narrative subject of altarpieces in late fifteenth-century Florence. Although the Visitation was a well-known story in both verbal and visual representations since the early medieval period, it became a popular subject of altarpieces only towards the end of the fifteenth century. In this study, the first part provides an overview of the complex religious and historical background to an emerging cult of the Visitation. Devotional practices focusing on the Visitation belong in a context of late medieval Marian devotion and in 1389 a new feast of the Visitation was introduced into the liturgical calendar of the Catholic Church. Because of the ongoing schism within the Catholic Church, the feast was not unanimously accepted across Western Europe until the later part of the fifteenth century. Contrary to a widely disseminated view, the feast of the Visitation cannot be associated with Franciscan spirituality, but was rather a clearly defined Dominican project that primarily emphasised the importance of peace and unity within the Christian Church. Simultaneously with the gradual acceptance of the new feast, visual representations of the Visitation began to appear at the centre of altarpieces. The Visitation exemplifies an increasing preference for narrative subjects within the genre of the altarpiece. The second part of the study presents an analysis of the concept of the narrative altarpiece and highlights the complexities involved in combining a narrative content with the traditional devotional function of the altarpiece. In detailed case studies some prominent art works produced in Florence between 1490 and 1503 are discussed within a framework of contextual analysis, narrative theory and iconography. Altarpieces by Domenico Ghirlandaio, Piero di Cosimo and Mariotto Albertinelli represent visual manifestations of a cult of the Visitation with roots in late medieval devotional practices. At the same time, the altarpieces highlight the multiple functions of altarpieces in a culture where art works responded to a variety of social and religious needs. Building on earlier studies, each case study presents new insights and evidence not considered in previous art historical research.

Response of perennial ryegrass (Lolium perenne) to renovation in Australian dairy pastures

This study reports on the effect of oversowing perennial ryegrass (Lolium perenne L.) into a degraded perennial ryegrass and white clover (Trifolium repens L.) pasture to extend its productive life using various intensities of seedbed preparation. Sites in New South Wales (NSW), Western Australia (WA), South Australia (SA) and Tasmania (Tas.) were chosen by a local group of farmers as being degraded and in need of renovation. Control (nil renovation) and medium (mulch and graze, spray with glyphosphate and sow) renovation treatments were common to all sites whereas minimum (mulch and graze, and sow) and full seedbed (graze and spray with glyphosphate and then full seedbed preparation) renovation were imposed only at some sites. Plots varied in area from 0.14 to 0.50 ha, and were renovated then sown in March or April 2000 and subsequently grazed by dairy cows. Pasture utilisation was estimated from pre- and post-grazing pasture mass assessed by a rising plate pasture meter. Utilised herbage mass of the renovated treatments was significantly higher than control plots in period 1 (planting to August) and 2 (first spring) at the NSW site only. There was no difference among treatments in period 3 (first summer) at any site, and only at the WA and NSW sites in period 4 (March to July 2001) was there a response to renovation. As a result, renovation at the NSW site only significantly increased ryegrass utilisation over the whole experimental period. Ryegrass plant density was higher at the NSW, WA (excluding minimum renovation) and Tas. (excluding full renovation) sites 6 months after renovation but this was only sustained for 12 months for the minimum and medium treatments at the NSW and Tas. sites, respectively, presumably due to reduced competition from naturalised C4 summer grasses [kikuyu (Pennisetum clandestinum) and paspalum (Paspalum dilatatum)] in NSW At the NSW, WA and SA sites, the original ryegrass plant density was low (<35 plants/m2) compared with the Tas. site where density was around 185/m2. The response to renovating a degraded perennial ryegrass pasture varied between sites in Australia. Positive responses were generally small and were most consistent where renovation removed competing C4 summer grasses.

Pre-release evaluation of the efficacy of the leaf-sucking bug Carvalhotingis visenda (Heteroptera: Tingidae) as a biological control agent for cat's claw creeper Macfadyena unguis-cati (Bignoniaceae)

In classical weed biological control, assessing weed response to simulated herbivory is one option to assist in the prioritization of available agents and prediction of their potential efficacy. Previously reported simulated herbivory studies suggested that a specialist herbivore in the leaf-feeding guild is desirable as an effective biological control agent for cat's claw creeper Macfadyena unguis-cati (Bignoniaceae), an environmental weed that is currently a target for biological control. In this study, we tested (i) whether the results from glasshouse-based simulated herbivory can be used to prioritise potential biological control agents by evaluating the impact of a leaf-sucking tingid bug Carvalhotingis visenda (Drake & Hambleton) (Hemiptera: Tingidae) in quarantine; and (ii) the likely effectiveness of low- and high-densities of the leaf-sucking tingid after its release in the field. The results suggest that a single generation of C. visenda has the potential to reduce leaf chlorophyll content significantly, resulting in reduced plant height and leaf biomass. However, the impact of one generation of tingid herbivory on below-ground plant components, including the roots and tuber size and biomass, were not significant. These findings are consistent with results obtained from a simulated herbivory trial, highlighting the potential role of simulated herbivory studies in agent prioritisation.

Lantana (Lantana camara) Seed Bank Dynamics: Seedling Emergence and Seed Survival.

Seed persistence is poorly quantified for invasive plants of subtropical and tropical environments and Lantana camara, one of the world's worst weeds, is no exception. We investigated germination, seedling emergence, and seed survival of two lantana biotypes (Pink and pink-edged red [PER]) in southeastern Queensland, Australia. Controlled experiments were undertaken in 2002 and repeated in 2004, with treatments comprising two differing environmental regimes (irrigated and natural rainfall) and sowing depths (0 and 2 cm). Seed survival and seedling emergence were significantly affected by all factors (time, biotype, environment, sowing depth, and cohort) (P < 0.001). Seed dormancy varied with treatment (environment, sowing depth, biotype, and cohort) (P < 0.001), but declined rapidly after 6 mo. Significant differential responses by the two biotypes to sowing depth and environment were detected for both seed survival and seedling emergence (P < 0.001). Seed mass was consistently lower in the PER biotype at the population level (P < 0.001), but this variation did not adequately explain the differential responses. Moreover, under natural rainfall the magnitude of the biotype effect was unlikely to result in ecologically significant differences. Seed survival after 36 mo under natural rainfall ranged from 6.8 to 21.3%. Best fit regression analysis of the decline in seed survival over time yielded a five-parameter exponential decay model with a lower asymptote approaching −0.38 (% seed survival = [( 55 − (−0.38)) • e (k • t)] + −0.38; R2 = 88.5%; 9 df). Environmental conditions and burial affected the slope parameter or k value significantly (P < 0.01). Seed survival projections from the model were greatest for buried seeds under natural rainfall (11 yr) and least under irrigation (3 yr). Experimental data and model projections suggest that lantana has a persistent seed bank and this should be considered in management programs, particularly those aimed at eradication.

A Method for Isolation of Protoplasts from Dermatophytes

A method has been developed to isolate protoplasts from dermatophytes using Novozym 234. A simple technique of flotation in MgSO, has been adapted to separate protoplasts from incubation mixture. Electron microscopic studies confirmed the absence of cell wall material on these protoplasts. The recovery of DNA from protoplasts was higher than from mycelia.

The effects of manganese content and mould size on abrasion and slurry erosion behaviour of chromium-manganese iron systems investigated by positron lifetime spectroscopy

Abrasion and slurry erosion behaviour of chromium-manganese iron samples with chromium (Cr) in the range similar to 16-19% and manganese (Mn) at 5 and 10% levels have been characterized for hardness followed by microstructural examination using optical and scanning electron microscopy. Positron lifetime studies have been conducted to understand the defects/microporosity influence on the microstructure. The samples were heat treated and characterized to understand the structural transformations in the matrix. The data reveals that hardness decreased with increase in Mn content from 5 to 10% in the first instance and then increase in the section size in the other case, irrespective of the sample conditions. The abrasion and slurry erosion losses show increase with increase in the section size as well as with increase in Mn content. The positron results show that as hardness increases from as-cast to heat treated sample, the positron trapping rate and hence defect concentration showed opposite trend as expected. So a good correlation between defects concentration and the hardness has been observed. These findings also corroborate well with the microstructural features obtained from optical and scanning electron microscopy. (C) 2009 Elsevier B. V. All rights reserved.

Primary Fallopian tube carcinoma:occurrence, risk and prognostic factors

The aim of the study was to clarify the occurrence, and etiological and prognostic factors of primary fallopian tube carcinoma (PFTC). We studied the sociodemographic determinants of the incidence of PFTC in Finland and the role of chlamydial infections and human papillomavirus infections as risk factors for PFTC. Serum tumor markers were studied as prognostic factors for PFTC. We also evaluated selected reproductive factors (parity, sterilization and hysterectomy) as risk or protective factors of PFTC. The risks of second primary cancers after PFTC were also studied. The age-adjusted incidence of PFTC in Finland increased to 5.4 / 1,000,000 in 1993 97. The incidence rate was higher in the cities, but the relative rise was higher in rural areas. Women in the two highest social classes showed a 1.8 fold incidence compared with those in the lowest. Women in agriculture and those not working outside the home showed only half the PFTC incidence of those in higher socioeconomic occupations. Pretreatment serum concentrations of hCGβ, CA125 and TATI were evaluated as prognostic markers for PFTC. Elevated hCGβ values (above the 75th percentile, 3.5 pmol/L; OR 2.49, 95% CI 1.22 5.09), stage and histology were strong independent prognostic factors for PFTC. The effects of parity, sterilization and hysterectomy on the risk of PFTC were studied in a case control-study with 573 PFTC cases from the Finnish Cancer Registry. In multivariate analysis parity was the only significant protective factor as regards PFTC, with increasing protection associated with increasing number of deliveries. In univariate analysis sterilization gave borderline protection against PFTC and the protective effect increased with time since the operation. In multivariate analysis the protection did not reach statistical significance. Chlamydial and human papillomavirus (HPV) infections were studied in two separate seroepidemiological case-control studies with 78 PFTC patients. The incidence of women with positive HPV or chlamydial serology was the same in PFTC patients and in the control group and was not found to be a risk factor for PFTC. Finally, the possible risk of a second primary cancer after diagnosis and treatment of PFTC in a cohort of 2084 cases from 13 cancer registries followed for second primary cancers within the period 1943 2000 was studied. In PFTC patients, second primary cancers were 36% more common than expected (SIR 1.36, 95% CI 1.13 1.63). In conclusion, the incidence of PFTC has increased in Finland, especially in higher social classes and among those in certain occupations. Elevated serum hCGβ reflect a worsened prognosis. Parity is a clear protective factor, as is previous sterilization. After PFTC there is a risk of second primary cancers, especially colorectal, breast, lung and bladder cancers and non-lymphoid leukemia. The excess of colorectal and breast cancers after PFTC may indicate common effects of earlier treatments, or they could reflect common effects of lifestyle or genetic, immunological or environmental background.

Raman spectrum of hydroxylamine hydrochloride (NH3OH.Cl)

The Raman spectrum of hydroxylamine hydrochloride (NH3OH.Cl) in the form of a single crystal has been photographed usingλ 2536·5 excitation. 32 Raman lines with frequency shifts 40, 57, 78, 88, 111, 125, 135, 156, 187, 217, 250, 330, 550, 575, 1004, 1168, 1204, 1470, 1496, 1565, 1590, 1979, 2636, 2710, 2750, 2789, 2926, 2970, 3000, 3050, 3141 and 3220 cm.−1 have been recorded. Of these, the first 8 low-frequency lines belong to the external oscillation, while the four lines at 187, 217, 250 and 330 cm.−1 should be attributed to the vibrations of the hydrogen bond valence vibrations. The remaining Raman lines have been assigned to the vibrations of the NH3OH ion. The O-H and N-H stretching vibrations are very much influenced by the presence of the hydrogen bonds in the crystal.

Novel insertion and deletion mutants of RpoB that render Mycobacterium smegmatis RNA polymerase resistant to rifampicin-mediated inhibition of transcription

The startling increase in the occurrence of rifampicin (Rif) resistance in the clinical isolates of Mycobacterium tuberculosis worldwide is posing a serious concern to tuberculosis management. The majority of Rif resistance in bacteria arises from mutations in the RpoB subunit of the RNA polymerase. We isolated M. smegmatis strains harbouring either an insertion (6 aa) or a deletion (10 aa) in their RpoB proteins. Although these strains showed a compromised fitness for growth in 7H9 Middlebrook medium, their resistance to Rif was remarkably high. The attenuated growth of the strains correlated with decreased specific activities of the RNA polymerases from the mutants. While the RNA polymerases from the parent or a mutant strain (harbouring a frequently occurring mutation, H442Y, in RpoB) were susceptible to Rif-mediated inhibition of transcription from calf thymus DNA, those from the insertion and deletion mutants were essentially refractory to such inhibition. Three-dimensional structure modelling revealed that the RpoB amino acids that interact with Rif are either deleted or unable to interact with Rif due to their unsuitable spatial positioning in these mutants. We discuss possible uses of the RpoB mutants in studying transcriptional regulation in mycobacteria and as potential targets for drug design.

Asymmetry in structural and thermo-mechanical behavior of intermetallic NiAl nanowire under tensile/compressive loading: A molecular dynamics study

The asymmetric stress strain behavior under tension/compression in an initial < 100 > B-2-NiAl nanowire is investigated considering two different surface configurations i.e., < 100 >/(0 1 0) (0 0 1) and < 100 >/(0 1 1) (0 - 1 1). This behavior is attributed to two different deformation mechanisms namely a slip dominated deformation under compression and a known twinning dominated deformation under tension. It is also shown that B2 -> BCT (body-centered-tetragonal) phase transformation under tensile loading is independent of the surface configurations for an initial < 100 > oriented NiAl nanowire. Under tensile loading, the nanowire undergoes a stress-induced martensiticphase transformation from an initial B2 phase to BCT phase via twinning along {110} plane with failure strain of similar to 0.30. On the other hand, a compressive loading causes failure of these nanowires via brittle fracture after compressive yielding, with a maximum failure strain of similar to-0.12. Such brittle fracture under compressive loading occurs via slip along {110} plane without any phase transformations. Softening/hardening behavior is also reported for the first time in these nanowires under tensile/compressive loadings, which cause asymmetry in their yield strength behavior in the stress strain space. Result shows that a sharp increase in energy with increasing strain under compressive loading causes hardening of the nanowire, and hence, gives improved yield strength as compared to tensile loading. (C) 2010 Elsevier Ltd. All rights reserved.

X-ray studies on crystalline complexes involving amino acids and peptides. XV. Crystal structures of L-lysine D-glutamate and L-lysine D-aspartate monohydrate and the effect of chirality on molecular aggregation

L-Lysine D-glutamate crystallizes in the monoclinic space group P2(1) with a = 4.902, b = 30.719, c = 9.679 A, beta = 90 degrees and Z = 4. The crystals of L-lysine D-aspartate monohydrate belong to the orthorhombic space group P2(1)2(1)2(1) with a = 5.458, b = 7.152, c = 36.022 A and Z = 4. The structures were solved by the direct methods and refined to R values of 0.125 and 0.040 respectively for 1412 and 1503 observed reflections. The glutamate complex is highly pseudosymmetric. The lysine molecules in it assume a conformation with the side chain staggered between the alpha-amino and the alpha-carboxylate groups. The interactions of the side chain amino groups of lysine in the two complexes are such that they form infinite sequences containing alternating amino and carboxylate groups. The molecular aggregation in the glutamate complex is very similar to that observed in L-arginine D-aspartate and L-arginine D-glutamate trihydrate, with the formation of double layers consisting of both types of molecules. In contrast to the situation in the other three LD complexes, the unlike molecules in L-lysine D-aspartate monohydrate aggregate into alternating layers as in the case of most LL complexes. The arrangement of molecules in the lysine layer is nearly the same as in L-lysine L-aspartate, with head-to-tail sequences as the central feature. The arrangement of aspartate ions in the layers containing them is, however, somewhat unusual. Thus the comparison between the LL and the LD complexes analyzed so far indicates that the reversal of chirality of one of the components in a complex leads to profound changes in molecular aggregation, but these changes could be of more than one type.

An accurate numerical integration scheme for finite rotations using rotation vector parametrization

A numerical integration procedure for rotational motion using a rotation vector parametrization is explored from an engineering perspective by using rudimentary vector analysis. The incremental rotation vector, angular velocity and acceleration correspond to different tangent spaces of the rotation manifold at different times and have a non-vectorial character. We rewrite the equation of motion in terms of vectors lying in the same tangent space, facilitating vector space operations consistent with the underlying geometric structure. While any integration algorithm (that works within a vector space setting) may be used, we presently employ a family of explicit Runge-Kutta algorithms to solve this equation. While this work is primarily motivated out of a need for highly accurate numerical solutions of dissipative rotational systems of engineering interest, we also compare the numerical performance of the present scheme with some of the invariant preserving schemes, namely ALGO-C1, STW, LIEMIDEA] and SUBCYC-M. Numerical results show better local accuracy via the present approach vis-a-vis the preserving algorithms. It is also noted that the preserving algorithms do not simultaneously preserve all constants of motion. We incorporate adaptive time-stepping within the present scheme and this in turn enables still higher accuracy and a `near preservation' of constants of motion over significantly longer intervals. (C) 2010 The Franklin Institute. Published by Elsevier Ltd. All rights reserved.

Ultimate Strength of RC Wall Panels with Openings

Test results of 12 reinforced concrete (RC) wall panels with openings are presented. The panels have been subjected to in-plane vertical loads applied at an eccentricity to represent possible accidental eccentricity that occurs in practice due to constructional imperfections. The 12 specimens consist of two identical groups of six panels each. One group of panels is tested in one-way in-plane action (i.e., supported at top and bottom edges against lateral displacement). The second group of panels is tested in two-way in-plane action (i.e., supported on all the four edges against lateral displacement). Openings in the panels represent typical door and window openings. Cracking loads, ultimate loads, crack patterns, and lateral deflections of the panels are studied. Empirical methods have been developed for the prediction of ultimate load. Also, lateral deflections, cracking loads, and ultimate loads of identical loads tested under one-way and two-way action are compared.