Patterns of motor abilities and technical skills as predictors of success for young elite football players

Sport-motor tests play an important role in football talent selections. However, single tests represent only parts of the complex game performance. The best game performance therefore does not necessarily need to go hand in hand with the best results in all tests of a test battery. Considering the complexity of the game performance appropriately, a holistic perspective together with a person-oriented approach are applied. Thereby, systems consisting of several variables are identified and analysed in a longitudinal study. Following this idea, six sport-motor tests were aggregated into a subsystem. 106 young male elite football players were tested three times (2011, 2012, 2013; Mage, t2011=12.26, SD=0.29). One year later (2014) their performance level was enquired. Data were analysed using the LICUR method, a cluster analytical method. Four patterns were identified, which remained stable at all measuring points. The players frequently show intraindividual and structurally similar patterns over time. At the third measuring point, a pattern occurred out of which the players are significantly more likely to advance to the highest performance level one year later. This pattern appears consistently above average, but does not always show best test performances. The significantly frequent development along structurally stable patterns suggests a predictive validity of the subsystem sport-motor tests between the ages of 12 to 15. Above average, but not necessarily outstanding performances both in the motor abilities as well as in the football specific tests appears to be particularly promising. This finding emphasizes the need of a holistic perspective in the talent selection.

Sustained impact of a short small group course with systematic feedback in addition to regular clinical clerkship activities on musculoskeletal examination skills-a controlled study.

BACKGROUND The discrepancy between the extensive impact of musculoskeletal complaints and the common deficiencies in musculoskeletal examination skills lead to increased emphasis on structured teaching and assessment. However, studies of single interventions are scarce and little is known about the time-dependent effect of assisted learning in addition to a standard curriculum. We therefore evaluated the immediate and long-term impact of a small group course on musculoskeletal examination skills. METHODS All 48 Year 4 medical students of a 6 year curriculum, attending their 8 week clerkship of internal medicine at one University department in Berne, participated in this controlled study. Twenty-seven students were assigned to the intervention of a 6×1 h practical course (4-7 students, interactive hands-on examination of real patients; systematic, detailed feedback to each student by teacher, peers and patients). Twenty-one students took part in the regular clerkship activities only and served as controls. In all students clinical skills (CS, 9 items) were assessed in an Objective Structured Clinical Examination (OSCE) station, including specific musculoskeletal examination skills (MSES, 7 items) and interpersonal skills (IPS, 2 items). Two raters assessed the skills on a 4-point Likert scale at the beginning (T0), the end (T1) and 4-12 months after (T2) the clerkship. Statistical analyses included Friedman test, Wilcoxon rank sum test and Mann-Whitney U test. RESULTS At T0 there were no significant differences between the intervention and control group. At T1 and T2 the control group showed no significant changes of CS, MSES and IPS compared to T0. In contrast, the intervention group significantly improved CS, MSES and IPS at T1 (p < 0.001). This enhancement was sustained for CS and MSES (p < 0.05), but not for IPS at T2. CONCLUSIONS Year 4 medical students were incapable of improving their musculoskeletal examination skills during regular clinical clerkship activities. However, an additional small group, interactive clinical skills course with feedback from various sources, improved these essential examination skills immediately after the teaching and several months later. We conclude that supplementary specific teaching activities are needed. Even a single, short-lasting targeted module can have a long lasting effect and is worth the additional effort.

The influence of students' prior clinical skills and context characteristics on mini-CEX scores in clerkships - a multilevel analysis.

BACKGROUND In contrast to objective structured clinical examinations (OSCEs), mini-clinical evaluation exercises (mini-CEXs) take place at the clinical workplace. As both mini-CEXs and OSCEs assess clinical skills, but within different contexts, this study aims at analyzing to which degree students' mini-CEX scores can be predicted by their recent OSCE scores and/or context characteristics. METHODS Medical students participated in an end of Year 3 OSCE and in 11 mini-CEXs during 5 different clerkships of Year 4. The students' mean scores of 9 clinical skills OSCE stations and mean 'overall' and 'domain' mini-CEX scores, averaged over all mini-CEXs of each student were computed. Linear regression analyses including random effects were used to predict mini-CEX scores by OSCE performance and characteristics of clinics, trainers, students and assessments. RESULTS A total of 512 trainers in 45 clinics provided 1783 mini-CEX ratings for 165 students; OSCE results were available for 144 students (87 %). Most influential for the prediction of 'overall' mini-CEX scores was the trainers' clinical position with a regression coefficient of 0.55 (95 %-CI: 0.26-0.84; p < .001) for residents compared to heads of department. Highly complex tasks and assessments taking place in large clinics significantly enhanced 'overall' mini-CEX scores, too. In contrast, high OSCE performance did not significantly increase 'overall' mini-CEX scores. CONCLUSION In our study, Mini-CEX scores depended rather on context characteristics than on students' clinical skills as demonstrated in an OSCE. Ways are discussed which focus on either to enhance the scores' validity or to use narrative comments only.

Improving the Assessment of Communication Skills at the Swiss Federal Licensing Exam: Results of a Student's Needs Assessment

Introduction With a three year project the assessment of communication skills within the Swiss Federal Licensing Examinations (FLE) shall be improved. As a first step a needs assessment among communication experts and medical students of the Swiss Medical Faculties will be performed. In this presentation the results of the students’ needs assessment will be presented. Methods A bilingual student’s online questionnaire will be developed by an expert panel taking relevant literature, the Swiss Catalogue of Learning Objectives and other consensus statements for communication (e.g., the European and Basler consensus statements) into account. With a think aloud study response process validity evidence will be sought. The questionnaire will focus on the following topics related to communication skills: (1) What has been taught?, (2) What has been assessed in the faculty exams?, (3) What has been assessed in the FLE?, (4) What should have been assessed in the FLE and how should the assessment be improved? Results Results of the students’ needs assessment will be available by the end of 2015 and be presented. Conclusions/ Take-home message We hope for valuable input for improving the assessment of communications skills within the FLE also from the students’ side. Results of the needs assessment from the students and experts will be combined and taken as input for an international expert symposium on how to improve the communication skills assessment within the FLE.

The Relationship of Student Demographics to 10th Grade MCAS Test Anxiety

The intensification of consequential testing situations is associated with an increase in anxiety among American students (Casbarro, 2005). Test anxiety can have negative effects on student test performance (Everson, Millsap, & Rodriguez, 1991). If test anxiety has the potential to decrease students’ test scores, it becomes a factor that can threaten the validity of any inferences drawn between test scores and student progress (Cizek & Burg, 2006). There are several factors that relate closely to test anxiety (Cizek & Burg, 2006). Variables of key influence include gender, socioeconomic status, and teacher-manifested anxiety (Hembree, 1988). Another influence upon test anxiety is students’ participation in academic support programs to prepare them for exit examinations. The purpose of this study was to examine the relationship between 10th grade high school student gender, socioeconomic status, perceived teacher anxiety, and student preparedness with levels of the Massachusetts Comprehensive Assessment System (MCAS) test anxiety. It appears that few studies have examined levels of high school test anxiety in regards to this specific high-stakes MCAS exit exam required for high school graduation. A two-phase sequential mixed-methods research design was used to survey (N=156) 10th grade students represented by a sampling of (n=80) students with low socioeconomic status and (n=76) students with high socioeconomic status regarding their levels of test anxiety in relation to upcoming MCAS testing. A multiple regression analysis was used to measure the relationship between the predictor variables (gender, socioeconomic status, perceived teacher anxiety, and student preparedness) with the criterion variable of student test anxiety using the Test Anxiety Inventory (TAI). Personal interviews with (n=20) volunteer students provided rich explanations of students’ academic self-efficacy, their perceptions of their performance on the upcoming MCAS exam, and their use of strategies to reduce their levels of test anxiety. Personal interviews with (n=12) volunteer school administrators and teachers provided descriptions of their perceptions of how test anxiety affected their students’ performance. A major quantitative finding of this study was that the variables of student socioeconomic status and student ratings of teacher anxiety accounted for the variance in students’ levels of surveyed test anxiety (R2 = .06, p = .033, small to medium effect size). These results indicate that different student populations vary in their readiness skills to successfully participate in consequential testing situations. Consequently, high-test anxious students would require emotional preparation as well as academic preparation when confronting high-stakes testing. The results have the potential to re-shape the format of schools’ MCAS test preparation efforts.

An ecologic comparison study of the impact of economic disadvantage on Texas Assessment of Knowledge and Skills performance, graduation rates, and readiness for higher education for students attending public and charter schools in Texas from 2004 to 2006

Purpose. No Child Left Behind aimed to "improve the academic achievement of the disadvantaged." The primary research question considered how academic achievement of those from economic disadvantage compared to those not from disadvantage? ^ Economically disadvantaged students can potentially have added academic disadvantage. Research shows low academic achievement can potentially result in drug abuse, youth violence, and teen pregnancy. ^ Methods. To compare the student populations, measures included TAKS results and academic indicator data collected by the Texas Education Agency. ^ Results. T-test analyses showed a significant difference between the economically and non-economically disadvantaged student populations in meeting the TAKS passing standard, graduation, and preparation for higher education.^ Conclusions. The achievement gap between students remained as indicated by the Texas testing program. More research and time are needed to observe if the desired impact on those from economic disadvantage will be reflected by academic achievement data.^

A process evaluation of a health literacy intervention targeting pediatric providers' communication skills at the Texas Children's Health Plan

Background. Health literacy is an important determinant for quality health care, and affects communication between patients and physicians. Poor communication may result in negative effects in health. Improved communication between patients and physicians could positively affect health outcomes. Communication skills are teachable.^ Objectives. (1) to evaluate the process involved in the design and implementation of a health literacy intervention targeting pediatric providers’ communication skills at the Texas Children’s Health Plan in Houston, Texas; and (2) to describe lessons learned from this process that may be used in future attempts to address the issue of health literacy and health communication. ^ Design/methods. The process evaluation of the implementation of a health literacy strategy at the Texas Children’s Health Plan (TCHP) consisted of a critical analysis of all documents and minutes from meetings of the team of investigators. It also involved a secondary analysis of data collected between December 2006 and June 2007. Descriptive statistics, paired t-test and Wilcoxon-signed-rank test were employed in analyzing the data. This information was complemented with a limited review of existing literature on communication skills training programs. ^ Results. The design of the educational intervention followed recommendations from experts in the field of health literacy. The delivery of the intervention was possible and benefited from existing resources and logistics within the TCHP. Very few targeted providers participated in two offerings of the workshop (6.6% and 1.7% respectively). After the educational intervention, providers showed increased knowledge of health literacy facts and its effects in health (p=0.001); increased awareness of the low health literacy problem (p=0.003); increased expectations for change in practice (p=0.002), and intent to use health literacy strategies for communication immediately following the intervention (p=0.001). Low participation indicated the need for further investigation of barriers to, and means for successful implementation of programs aimed to improving health communication. ^ Conclusions. A short, focused intervention utilizing health literacy strategies for communication appeared effective in increasing knowledge and intentions for change in a small group of pediatric providers. ^

Evaluation of the T-SPOT(RTM).TB test in the diagnosis of latent tuberculosis infection in HIV-infected children in Uganda

Background. About a third of the world’s population is infected with tuberculosis (TB) with sub-Saharan Africa being the worst hit. Uganda is ranked 16th among the countries with the biggest TB burden. The burden in children however has not been determined. The burden of TB has been worsened by the advent of HIV and TB is the leading cause of mortality in HIV infected individuals. Development of TB disease can be prevented if TB is diagnosed during its latent stage and treated with isoniazid. For over a century, latent TB infection (LTBI) was diagnosed using the Tuberculin Skin Test (TST). New interferon gamma release assays (IGRA) have been approved by FDA for the diagnosis of LTBI and adult studies have shown that IGRAs are superior to the TST but there have been few studies in children especially in areas of high TB and HIV endemicity. ^ Objective. The objective of this study was to examine whether the IGRAs had a role in LTBI diagnosis in HIV infected children in Uganda. ^ Methods. Three hundred and eighty one (381) children were recruited at the Baylor College of Medicine-Bristol Meyers Squibb Children’s Clinical Center of Excellence at Mulago Hospital, Kampala, Uganda between March and August 2010. All the children were subjected to a TST and T-SPOT ®.TB test which was the IGRA chosen for this study. Sputum examination and chest x-rays were also done to rule out active TB. ^ Results. There was no statistically significant difference between the tests. The agreement between the two assays was 95.9% and the kappa statistic was 0.7 (95% CI: 0.55–0.85, p-value<0.05) indicating a substantial or good agreement. The TST was associated with older age and higher weight for age z-scores but the T-SPOT®. TB was not. Both tests were associated with history of taking anti-retroviral therapy (ART). ^ Conclusion. Before promoting use of IGRAs in children living in HIV/TB endemic countries, more research needs to be done. ^

Optimizing the Density of Holes of EWT Solar Cells Taking Into Consideration Mechanical Aspects

EWT solar cells start from drilled wafers with approximately 100 holes/cm2. These holes act as stress concentrators leading to a reduction in the mechanical strength of this type of wafers. The viability of cells with higher density of holes has been studied. To this end, sets of wafers with different density of holes have been characterized. The ring on ring test has been employed and FE models have been developed to simulate the test. The statistical evaluation permits to draw conclusions about the reduction of the strength depending on the density of holes. Moreover, the stress concentration around the holes has been studied by means of the FE method employing the sub-modeling technique. The maximum principal stress of EWT wafers with twice the density of holes of commercial ones is almost the same. However, the mutual interaction between the stress concentration effects around neighboring holes is only observed for wafers with a density of 200 holes/cm2

Learning curves of basic laparoscopic psychomotor skills in SINERGIA VR simulator

Purpose: Surgical simulators are currently essential within any laparoscopic training program because they provide a low-stakes, reproducible and reliable environment to acquire basic skills. The purpose of this study is to determine the training learning curve based on different metrics corresponding to five tasks included in SINERGIA laparoscopic virtual reality simulator. Methods: Thirty medical students without surgical experience participated in the study. Five tasks of SINERGIA were included: Coordination, Navigation, Navigation and touch, Accurate grasping and Coordinated pulling. Each participant was trained in SINERGIA. This training consisted of eight sessions (R1–R8) of the five mentioned tasks and was carried out in two consecutive days with four sessions per day. A statistical analysis was made, and the results of R1, R4 and R8 were pair-wise compared with Wilcoxon signed-rank test. Significance is considered at P value <0.005. Results: In total, 84.38% of the metrics provided by SINERGIA and included in this study show significant differences when comparing R1 and R8. Metrics are mostly improved in the first session of training (75.00% when R1 and R4 are compared vs. 37.50% when R4 and R8 are compared). In tasks Coordination and Navigation and touch, all metrics are improved. On the other hand, Navigation just improves 60% of the analyzed metrics. Most learning curves show an improvement with better results in the fulfillment of the different tasks. Conclusions: Learning curves of metrics that assess the basic psychomotor laparoscopic skills acquired in SINERGIA virtual reality simulator show a faster learning rate during the first part of the training. Nevertheless, eight repetitions of the tasks are not enough to acquire all psychomotor skills that can be trained in SINERGIA. Therefore, and based on these results together with previous works, SINERGIA could be used as training tool with a properly designed training program.

Interactividad programada en el Game Engine de Blender

Con este proyecto se ha desarrollado una guía introductoria a uno de los aspectos más complejos y especializados de Blender, que es el control de su motor de videojuegos mediante programas escritos en Python. Está orientado a lectores que tienen un conocimiento amplio sobre el manejo de Blender, su interfaz y el funcionamiento de sus diferentes elementos, así como una mínima experiencia en cuanto a programación. Se ha organizado en una parte descriptiva, centrada en el lenguaje Python y en las bases de su uso para programar el motor de videojuegos (Game Engine) de Blender, y otra de práctica guiada, que constituye la mayoría del proyecto, donde se estudian de manera progresiva ejemplos concretos de uso del mismo. En la parte descriptiva se ha tratado tanto el funcionamiento más básico del lenguaje Python, especialmente las características que difieren de otros lenguajes de programación tradicionales, como su relación con Blender en particular, explicando las diferentes partes de la API de Blender para Python, y las posibles estrategias de uso. La parte práctica guiada, dado que esta interacción entre Blender y Python ofrece un rango de posibilidades muy amplio, se ha centrado en tres áreas concretas que han sido investigadas en profundidad: el control del objeto protagonista, de la cámara y la implementación de un mapa de orientación. Todas ellas se han centrado en torno a un ejemplo común, que consiste en un videojuego muy básico, y que, gracias a los ficheros de Blender que acompañan a esta memoria, sirve para apoyar las explicaciones y poder probar su efecto directamente. Por una parte, estos tres aspectos prácticos se han explicado exhaustivamente, y se han llevado hasta un nivel relativamente alto. Asimismo se han intentado minimizar las dependencias, tanto entre ellos como con la escena que se ha usado como ejemplo, de manera que sea sencillo usar los programas generados en otras aplicaciones. Por otra, la mayoría de los problemas que ha sido necesario resolver durante el desarrollo no son específicos de ninguna de las tres áreas, sino que son de carácter general, por lo que sus explicaciones podrán usarse al afrontar otras situaciones. ABSTRACT. This Thesis consists of an introductory guide to one of the most complex and specific parts of Blender, which is the control of its game engine by means of programs coded in Python. The dissertation is orientated towards readers who have a good knowledge of Blender, its interface and how its different systems work, as well as basic programming skills. The document is composed of two main sections, the first one containing a description of Python’s basics and its usage within Blender, and the second consisting of three practical examples of interaction between them, guided and explained step by step. On the first section, the fundamentals of Python have been covered in the first place, focusing on the characteristics that distinguish it from other programming languages. Then, Blender’s API for Python has also been introduced, explaining its different parts and the ways it can be used in. Since the interaction between Blender and Python offers a wide range of possibilities, the practical section has been centered on three particular areas. Each one of the following sections has been deeply covered: how to control the main character object, how to control the camera, and how to implement and control a mini-map. Furthermore, a demonstrative videogame has been generated for the reader to be able to directly test the effect of what is explained in each section. On the one hand, these three practical topics have been thoroughly explained, starting from the basis and gradually taking them to a relatively advanced level. The dependences among them, or between them and the demonstrative videogame, have been minimised so that the scripts or ideas can be easily used within other applications. On the other hand, most of the problems that have been addressed are not exclusively related to these areas, but will most likely appear in different situations, thus enlarging the field in which this Thesis can be used.

Tritium permeation experiment at IFMIF Medium Flux Test Module

Tritium release experiments using different breeding material candidates are planned for the medium flux region of the IFMIF Test Cell. Nowadays, only ceramic breeder materials have been suggested to be tested in the Tritium Release Module located in the Medium Flux Test Module of IFMIF. Liquid breeder blankets are very promising and for that reason, several concepts will be tested in ITER. One of the main problems concerning the liquid blankets is the permeation of the generated tritium in the breeder throughout the walls. Since tritium permeation is highly influenced by irradiation conditions, IFMIF is a suitable scenario to perform tritium permeation related experiments. In this paper, a preliminary design of a tritium permeation experiment for the Medium Flux Test Module of IFMIF is proposed, in order to contribute to the progress of the liquid breeder blanket concept validation. The conceptual design of the capsule in which the experiment will be performed is carried out, taking into consideration the experiment necessities and its implementation in the Tritium Release Module. In addition to this, some thermal hydraulic calculations have been performed to evaluate the thermal behaviour of the irradiation capsule

A friendly online C compiler to improve programming skills based on student self-assessment

This paper presents an online C compiler designed so that students can program their practical assignments in Programming courses. What is really innovative is the self-assessment of the exercises based on black-box tests and train students’ skill to test software. Moreover, this tool lets instructors, not only proposing and classifying practical exercises, but also evaluating automatically the efforts dedicated and the results obtained by the students. The system has been applied to the 1st-year students at the Industrial Engineering specialization at the Universidad Politecnica de Madrid. Results show that the students obtained better academic performance, reducing the failure rate in the practical exam considerably with respect to previous years, in addition that an anonymous survey proved that students are satisfied with the system because they get instant feedback about their programs.

Face, content, and construct validity of the EndoViS training system for objective assessment of psychomotor skills of laparoscopic surgeons

Background The aim of this study is to present face, content, and constructs validity of the endoscopic orthogonal video system (EndoViS) training system and determines its efficiency as a training and objective assessment tool of the surgeons’ psychomotor skills. Methods Thirty-five surgeons and medical students participated in this study: 11 medical students, 19 residents, and 5 experts. All participants performed four basic skill tasks using conventional laparoscopic instruments and EndoViS training system. Subsequently, participants filled out a questionnaire regarding the design, realism, overall functionality, and its capabilities to train hand–eye coordination and depth perception, rated on a 5-point Likert scale. Motion data of the instruments were obtained by means of two webcams built into a laparoscopic physical trainer. To identify the surgical instruments in the images, colored markers were placed in each instrument. Thirteen motion-related metrics were used to assess laparoscopic performance of the participants. Statistical analysis of performance was made between novice, intermediate, and expert groups. Internal consistency of all metrics was analyzed with Cronbach’s α test. Results Overall scores about features of the EndoViS system were positives. Participants agreed with the usefulness of tasks and the training capacities of EndoViS system (score >4). Results presented significant differences in the execution of three skill tasks performed by participants. Seven metrics showed construct validity for assessment of performance with high consistency levels. Conclusions EndoViS training system has been successfully validated. Results showed that EndoViS was able to differentiate between participants of varying laparoscopic experience. This simulator is a useful and effective tool to objectively assess laparoscopic psychomotor skills of the surgeons.

Assessment of University External Internships. Towards a Mixed Model for Measuring the Acquisition of Skills and the Satisfaction of Parties Involved

The continuous improvement of management and assessment processes for curricular external internships has led a group of university teachers specialised in this area to develop a mixed model of measurement that combines the verification of skill acquisition by those students choosing external internships with the satisfaction of the parties involved in that process. They included academics, educational tutors of companies and organisations and administration and services personnel in the latter category. The experience, developed within University of Alicante, has been carried out in the degrees of Business Administration and Management, Business Studies, Economics, Advertising and Public Relations, Sociology and Social Work, all part of the Faculty of Economics and Business. By designing and managing closed standardised interviews and other research tools, validated outside the centre, a system of continuous improvement and quality assurance has been created, clearly contributing to the gradual increase in the number of students with internships in this Faculty, as well as to the improvement in satisfaction, efficiency and efficacy indicators at a global level. As this experience of educational innovation has shown, the acquisition of curricular knowledge, skills, abilities and competences by the students is directly correlated with the satisfaction of those parties involved in a process that takes the student beyond the physical borders of a university campus. Ensuring the latter is a task made easier by the implementation of a mixed assessment method, combining continuous and final assessment, and characterised by its rigorousness and simple management. This report presents that model, subject in turn to a persistent and continuous control, a model all parties involved in the external internships are taking part of. Its short-term results imply an increase, estimated at 15% for the last course, in the number of students choosing curricular internships and, for the medium and long-term, a major interweaving between the academic world and its social and productive environment, both in the business and institutional areas. The potentiality of this assessment model does not lie only in the quality of its measurement tools, but also in the effects from its use in the various groups and in the actions that are carried out as a result of its implementation and which, without any doubt and as it is shown below, are the real guarantee of a continuous improvement.